Get complete information related to latest Mail Box Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Mail Box Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Mail Box Tenders.
Tender For supply of axle box complete without cylindrical roller unit for wap7 as per clw's sp ecn. no.clw/ms/3/003 alt-5 or latest. one set consist of 03 items/ 06 nos. as follows; 1) axle box complete with earth contact without item no.7 (cylindrical roller unit) as per drg. no.1209.01.111.005 alt.3 or latest-02 nos/set. 2) axle box complete with hassier ttansmit ter contact without item no.7(cylindrical roller unit) and 13 (pulse generator) as per drg.no.1209.01.111.06, alt-2 or latest -01 no/set. (note: in all drg. nos.1209.01.111.005,00 6 and 007 item ref 6, assembly paste should be molykote 1000 instead of klubber q paste -nb 50. as per drg.no. clw drg.no.1209.01.111.005 alt-3 or latest specn: clw spec no.clw/ms/3/0 03 alt-5 or latest. [ warranty period: 30 months after the date of delivery ]
Tender For auction sale of scrap cut thread rubber pieces,scrap lot consisting of office old records,scrap auto grade-i,scrap inter cooler all type (loc-inside gowdown),scrap radiator all type (loc-inside gowdown),scrap door cylinder (loc-inside gowdown),scrap electrical horn (loc-inside gowdown),scrap aluminium bend pipe,scrap rear brake chamber (inside gowdown),scrapped bench grinder as is where is condition,scrapped battery charger (elak and tiger make),scrapped monoblock pump etc,scrap sump motor (sub well motor),scrap sub mersible pump 4.5,scrap induction motor etc,scrap sub mersible pump motor 4.5,scrap sewing machine motor,scrap welding machine oil etc,scrap co2 welding machine colton,scrap welding machine oil cooled,scrap geared motor 1 hp,scrap alternator 25 kva,scrap smoke meter indus,scrap bar light system - 02 nos, battery load tester.,scrap feeder machine for co2 welding machine,scrap industrial wall mounted fan,scrap tyre pressure unit,scrap oxygen and acetelyn regulator etc,scrap 0.5 hp induction motor etc,ms scrap with or w/o aluminum attachment,scrap empty plastic cans of 5 ltr., capacity lot,scrap wood & dencified wooden floor pieces,pistons without connecting rod,scrap lot consisting of bvc/paint tin,scrap gear box bel housing
Tender For auction sale of scrap gear box lower top,scrap gear box upper top,scrap clutch cover,scrap oil stearing (engine),scrap rexine with/without foam,scrap rocker arm assly.,scrap cam shaft,scrap fly wheels assly.,scrap ms seat with frames 2 seater,scrap plastic seat with frames 2 seater,scrap air dryer cartridge,scrap lot consisting of electrical items,scrap crown pinion assembly,scrap epdm & waste rubbers,scrap 2 seat (foam, rexine & wood),scrap lot of nylon tyre 8.25 x 20 lot no.n -lot,scrap lot of radial tyre 900 x 20 lot no.o -lot,scrap lot of radial tyre 1000 x 20 lot no.p -lot,scrap lot of radial tyre 235 x 75 lot no.q -lot,scrap lot of radial tyre 295 x 80 lot no.q -lot,scrap lot consisting of rexine,scrap lot consisting of ms scrap etc,scrap lot consisting of bvc/paint tin etc,scrap lot consisting of flap and epdm rubber,scrap lot consisting of plastic cans 5 lts. capacity,scrap lot consisting of ply wood etc,scrap lot consisting of fiber sheets,scrap lot consisting of electrical items,scrap 2 seater and 3 seater frames,scrap alluminium pieces,ms scrap and rusted angels etc,bvc/paint tin and empty plastic lot,scrap plywood & densified wooden floor pieces etc,scrap front & rear glass,scrap rexines,scrap epdm & waste rubbers,scrap bus bucket seat assly, with or without frames,scrap ms seat assly, with or without frames
Tender For corrigendum : provn of 02 in nos bore wells alongwith associated items at icgs mundra - material and labour for drilling of 02 nos pilot/trial bore by direct rotary rig method including all t&p through any kind of starta (soil, kankar, boulder or soft or hard rock) down up to 150 m depth below ground level by using suitable drill bit according to levering of casing pipe including the cost of mud pit, channels, etc and disposal of soil obtained to a distance not exc. 1 km away complete all as specified. note:- (i) the drilling shall be continued up to specified depth and in case sticky clay occurs in between the drilling must be stopped and hydrologist of gws & sb shall be contacted & eggr-in-charge shall be informed.(ii)cost of this consultant shall be borne by contractor (iii) taking the samples from the bore well cutting for every 3 meter interval and every change in strata if less than 3meter. (iv) preparation of litho logs based on these samples.(v) drill time log to be prepared and prescribed., (vi) aquifer performance tests at constant discharge with draw down and recovery reading.(vii) after completion of pilot bore, the contractor shall have to arrange for electro eater logging test of each bore.(viii) contractor have also produced bore well water test report for drinking water parameters before levering of motor and pump.(note:- if water quality not found fit for domestic purpose use then all other connected items of trial bore will not be executed.) , supply assembling, jointing, lowering and fixing in the bore hole pvc casing pipe of nominal dia 315 mm (medium well) ,10 kg/cm2 working pressure, confirming to is 4985-2000 including providing pea gravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. make: astral/ashirwad/ajay/sfmc, all as per item no 2.00 above but slotted pipe. , supply, assembling, jointing, lowering lead free pvc column pipes of nominal dia 65 mm, od 75 mm (min), non toxic, pressure 16 kg/cm2 with and including top and bottom adaptor (ss) and accessories like epdm ring and double ss stud all as spd and directed by engineer-in-charge. make: astral/ashirwad/ajay/sfmc, development of tube well with compressed air by means of air compressor of suitable capacity not less than 300 cfm and over pumping using suitable capacity pump to make available water free from turbidity complete all as specified and directed by engineer-in-charge., m & l for conducting yield test for the bore well by continuously pumping for 24 hours by using a submersible pump set to determine safe pumping yield and produced water test report of samples which is collect every hour complete as directed by the engineer-in-charge. [ all arrangements for yield test shall be made by contractor and cost for the same borne by contractor ], supply and fix ms reducer, bail plug, top cover made of 3mm thick ms plate for bore well in two half sections having a hole of 75 mm bore in centre to accommodate pvc pipe and submersible cable suitable for fixing to the pvc casing pipe top, electric logging and simple strata box including provision of 2 sets of ms clamps made of 50x6mm ms flat including nuts, bolts, etc. including one coat of epoxy primer and two coats of epoxy paint wherever necessary complete all as specified and directed by engineer-in-charge., supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, water lubricate, 3 phase, 10.0hp (appx) 415 volts, 50 hz with suitable submersible electric motor suitable for discharge of 2 liters per second against total head of 125m in the bore complete all as specified and directed by the engineer-in-charge. [ note : column pipe, submersible cable and control gear will be measured and paid separately]. [make: kirloskar / crompton / ksb], supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, wa
Tender For supply of supply of ms outer body 5 feet air curtain , sitc of motion sensor for auto operation of air curtain with sliding gate , installation testing and commissioning of 5 feet air curtain , supply of ac crca sheet metal box with current rating 20a single pole mcb and 3 pin socket , supply of single core multistranded flexible copper conductor of 1.5 sq mm
Tender For supply of fabricated ms channel (u type) size 55mm(width)x25mm(arm)x 3mm(thickness 3mm),lengt h 460mm having 02 hole of size 13mm with back piece for fixing of 120ah vrla battery box. ms channel s hould confirm to is specification 2062-2011,fe410wc. [ warranty period: 30 months after the date of del ivery ]