Get complete information related to latest Male Condom Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Male Condom Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Male Condom Tenders.
Tender For supply of shunt safe device specification 1. the unit should be an audio visible alarm unit, to be u sed by the shunting staff for their own safety during shunting operations. 2. the unit should be made of at l east 1.2 mm thick ms sheet duly powder epoxy coasted. 3. the visible indication is to be provided with the help of a matrix of blue led?s of 5 mm diameter. the front size matrix should be have 4 rows and 4 column s and the matrices on either side should have 1 column of 4 led?s each. the led?s should be flashing with one second off and one second on times. the side led?s should be located at an angle of 32 to 35 degrees from the front matrix, with the objective is to disperse the light in the front, as well as on the two sides. 4. t he audio alarm should comprise of a loud speaker of such intensity as to be audible from a distance of at le ast 75 meters in a noisy environment. nominal audio power out put of the unit should be 10 watt, which sh ould be provided by the means of the sturdy horn type loud speaker. the horn should be protected with the help of ms bracket of suitable size duly powder coated. the sound to be intermittent to be decided in consu ltation with railways. 5. the unit should be provided with a battery backup of at least 4 to 5 hours. 6. batte r 12v 4.5 ah lithium-ion battery. 7. the unit shall be usable in all weather conditions in open areas. the de sign should be rainwater proof. 8. there should be hook for hanging the device with the coach/wagon. the hook should have a diameter of 2.5 inches and it should be possible to rotate the hook in any direction. hoo k should be strong enough tom sustain the regular used of the unit. 9. rubber lining or any other type of sh ock absorbers should be provided at the bottom and the back side. 10. the unit should be provided with a s uitable and sturdy on off switch, so located that it is not operated accidentally. a jack plug in arrangement should be provided to facilitate the changing of batter with an external charger. 11. the led?s should be pr otected with the help of an acrylic sheet. 12. battery on charge indication should be provided at suitable lo cation. 13. external smps charger to be provided for charging batteries. [ warranty period: 30 months af ter the date of delivery ]
Tender For supply work of d.i. pipe and fitting material-, 80 mm d.i. pippe (k-7) (kirloskar, kartar, karan) , 100 mm d.i. pippe (k-7) (kirloskar, kartar, karan) , 150 mm d.i. pippe (k-7) (kirloskar, kartar, karan) , 200 mm d.i. pippe (k-7) (kirloskar, kartar, karan) , 250 mm d.i. pippe (k-7) (kirloskar, kartar, karan) , 300 mm d.i. pippe (k-7) (kirloskar, kartar, karan) , 350 mm d.i. pippe (k-7) (kirloskar, kartar, karan) , 400 mm d.i. pippe (k-7) (kirloskar, kartar, karan) , 450 mm d.i. pippe (k-7) (kirloskar, kartar, karan) , ng and laying including testing ductile pn 16 type iron flanged spigot conformim :9523/2000 in the following nominal diameter/sizes with external bitumen coa g as per clause 13 of is: 9523/2000. , 80 mm d.i. flange (k-7) (kirloskar, kartar, karan) , 100 mm d.i. flange (k-7) (kirloskar, kartar, karan) , 150 mm d.i. flange (k-7) (kirloskar, kartar, karan) , 200 mm d.i. flange (k-7) (kirloskar, kartar, karan) , 250 mm d.i. flange (k-7) (kirloskar, kartar, karan) , 300 mm d.i. flange (k-7) (kirloskar, kartar, karan) , 350 mm d.i. flange (k-7) (kirloskar, kartar, karan) , 400 mm d.i. flange (k-7) (kirloskar, kartar, karan) , 450 mm d.i. flange (k-7) (kirloskar, kartar, karan) , 30 mm d.i. elbow (k-7) (kirloskar, kartar, karan) , 100 mm d.i. elbow (k-7) (kirloskar, kartar, karan) , 50 mm d.i. elbow (k-7) (kirloskar, kartar, karan) , 200 mm d.i. elbow (k-7) (kirloskar, kartar, karan) , 250 mm d.i. elbow (k-7) (kirloskar, kartar, karan) , 200 mm d.i. elbow (k-7) (kirloskar, kartar, karan), 100 mm d.i. bend 22.5 (k-7) (kirloskar, kartar, karan) , 150 mm d.i. bend 22.5 (k-7) (kirloskar, kartar, karan) , 200 mm d.i. bend 22.5 (k-7) (kirloskar, kartar, karan) , 250 mm d.i. bend 22.5 (k-7) (kirloskar, kartar, karan) , 300 mm d.i. bend 22.5 (k-7) (kirloskar, kartar, karan) , le iron double socket 45" bends conforming to 15: 9523/2000 having dimension as per table nal diameter/sizes with external bitumen coating and internal cement mortar lining. , 80 mm d.i. bend 45 (k-7) (kirloskar, kartar, karan) , 100 mm d.i. bend 45 (k-7) (kirloskar, kartar, karan) , 150 mm d.i. bend 45 (k-7) (kirloskar, kartar, karan) , 200 mm d.i. bend 45 (k-7) (kirloskar, kartar, karan) , 250 mm d.i. bend 45 (k-7) (kirloskar, kartar, karan) , 300 mm d.i. bend 45 (k-7) (kirloskar, kartar, karan) , e iron double socket 90 bends conforming to is: 9523/2000 having dimension as per table mal diameter/sizes with external bitumen coating andinternal cement mortar lining. , 80 mm d.i. bend 90 (k-7) (kirloskar, kartar, karan) , 100 mm d.i. bend 90 (k-7) (kirloskar, kartar, karan) , 150 mm d.i. bend 90 (k-7) (kirloskar, kartar, karan) , 200 mm d.i. bend 90 (k-7) (kirloskar, kartar, karan) , 250 mm d.i. bend 90 (k-7) (kirloskar, kartar, karan) , 300 mm d.i. bend 90 (k-7) (kirloskar, kartar, karan) , 80 mm d.i. air valve (class pn-16) (kirloskar, kartar, karan) , 100 mm d.i. air valve (class pn-16) (kirloskar, kartar, karan) , 150 mm d.i. air valve (class pn-16) (kirloskar, kartar, karan) , 200 mm d.i. air valve (class pn-16) (kirloskar, kartar, karan) , 250 mm d.i. air valve (class pn-16) (kirloskar, kartar, karan) , 300 mm d.i. air valve (class pn-16) (kirloskar, kartar, karan) , 80 mm d.1. tail piece (k-7) (kirloskar, kartar, karan) , 100 mm d.i. tail piece (k-7) (kirloskar, kartar, karan) , 150 mm d.i. tail piece (k-7) (kirloskar, kartar, karan) , 200 mm d.i. tail piece (k-7) (kirloskar, kartar, karan) , 250 mm d.i. tail piece (k-7) (kirloskar, kartar, karan) , 300 mm. d.i. tail piece (k-7) (kirloskar, kartar, karan) , 80 mm d.i. dummy end cap isi mark (according to sample). , 100 mm d.i. dummy end cap isi mark (according to sample) , 150 mm d.i. dummy end cap isi mark (according to sample) , 200 mm r.l. rummy fod can 151 mark laccording to sample), ??????? ?? ????? , 150 mm d.i. rubber ring isi mark heavy (according to sample) , 200 mm d.i. rubber ring isi mark heavy (according to sample) , 250 mm d.i. rubber ring isi mark heavy (according to sample) , 300 mm
Tender For bid to ras bid to ras tender for supply of lv7/tmb 9320-000087 rubber mounting left and right (for front eng suspension) , lv7/tmb 2574-4215-0115 brake shoe with lining std , lv7/tmb 1460-362-457 pressure control valve , lv7/tmb 2632-4391-0173 repair kit spring brake actuator t20/24 , lv7/tmb 2632-3240-0103 assy first leaf with bush , lv7/tmb 2574-4600-0115 assy ball joint , lv7/tmb 2525-2340-0113 seal kit , lv7/tmb 2751-1540-0113 ce bracket assy , lv7/tmb 2786-1399-9917 minor repair kit air compressor , lv7/tmb 2614-3240-3203 centre pin , lv7/tmb 2576-7250-0124 assy window regulator rh , w-5 iwe-0015 benches truck welding 1524 mm 60 long x 609.6mm 24
Tender For corrigendum : supply of consumables in ash handling plant - metal braided air hose,3/8"x 1 mtr, with both sides fittings, metal braided air hose,3/8"x 1/2 mtr, with both sides fittings, nipple,size 3/8" x 3/8 "inch, hexagonal standard x male nipples; zinc plated & passivated, nipple,1/2" x 3/8": ms,hexagonal; zinc plated & passivated, nipple, 1"x 3/8": ms,hexagonal; zinc plated & passivated, 1" bsp male to 1/2" bsp female reducer bushing thread pipe fitting, 1" x1" bsp hexagonal nipple; material required for nipple: ss 316, working pr:150 bar, hose: double braided yarn, size : 38mm x 50 m, material: pvc ,, special features: heavy duty, metal seal putty with hardener for cast iron bends, fly ash unloading rubber hose 4 x6mtr (lg) wear resistant flexible rubber hose) both, end ms flange as per asa 300# ansi b 16.5 drilled specs:, working pressure (w.p): 10 bar (10kg/cm2),, proof pressure: 1.5 times of w.p. bursting pressure: 3 times of w.p,, reinforcement: with woven textile ply reinforced with galvanized steel wire in epdm rubber lining.
Tender For auction sale of u/s 200/210 ltr rusted empty steel drums,u/s bearing steel scrap,u/s ms coal pipe and bend scrap (with ceramic lining),u/s cast iron scrap,u/s conveyor roller ms scrap without rubber lining,u/s conveyor roller ms scrap with rubber lining,us ss scrap,u/s mixed ms scrap,u/s grinding ring steel scrap,u/s grinding ball scrap,u/s grinding roll scrap,u/s esp/ gi sheet / ms tin scrap,u/s ms pipe scrap,u/s ms core air tube/ pa tube with ss tip scrap,u/s air resister scrap,u/s ss condenser tube scrap (5 kg),u/s brass scrap (10 kg),u/s aluminium scrap/ aluminium cap of bulb and tube scrap,u/s measuring pt scrap,u/s measuring instrument/ all type and fitting scrap/ elect item scrap,u/s choke scrap,u/s nylon conveyor belt scrap (cut piece scrap),us ceramic tiles scrap / annual repair ceramic tiles scrap,us bag filter scrap,u/s lube oil with drum,u/s industrial colour monitor scrap, u/s industrial colour monitor scrap etc,u/s empty plastic jerry can 20/25 ltr,u/s battery scrap
Tender For supply of rubber hose, heavy duty, having smooth bore, hose to size : 20mm nb a) nom inal bore: 20mm with tolerence of +/-0.75mm. b) minimum thickness of lining 1.5mm. c)mini mum thickness of cover 1.0 mm. d) reinforcement: natural/synthetic fibres. e) working p ressure: 10.2 kgs/sq cm f) proof pressure 20.4 kgs/sq cm. note: a) make: dunlop/parker/gl obal/polyhose/indomaksson. b) mtc for quality & test pressure shall accompany the su pply. c) make shall be indicated in the offer. d) authorisation letter from manufacturer, shall accompany the offer. ]