Latest masonry block Tenders | Government masonry block Tenders

Central Government/Public Sector

CTN :39195831

25 Feb, 2025 13.89 Lacs

East Singhbhum - Jharkhand

Tender For annual civil maintenance work at turamdih mines - earthwork in excavation in the following types of soil and rock up to and including 1.5 mtr. lead including bailing or pumping out any water accumulating inside the excavated pit or trench shoring strutting adequate protection to be taken during excavation transporting the excavated soil for all lead stacking selectively including disposing off the rubbish rock fragments excess spoils etc. lead upto 100 mtrs. in the area as directed by the engineer all complete as per drawing specification and direction of the engineer. earth work in back filling with available earth including watering and compaction at all elevations around foundations walls wells tunnels pitsculverts trenches road approaches and in plinth filling and area filling as per specifications and drawings and as directed by the engineer with selected spoil within a lead of 100 mtr. disposal carriage of rubbish waste rock earth etc.dumped stacked at site by mechanical means including loading unloading and dressing properly lead upto 5 km. and up to any lift includind cost of all labours and equipments. surface dressing of the ground in all kinds of soil including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead up to 50 m and lift up to 1.5 m. supply mix place in position compact cure cement concrete 1 cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size below foundations walls wells pits trenches etc. and in basin lining as per specifications drawings and directions of the engineer and including cost of centring and shuttering but excluding cost of cement. supply mix place in position compact and cure including testing of concrete specimens finishing surfaces as per specifications drawings and directions of the engineer of the following grades of concrete with 20mm and down graded stone aggregate and coarse sand in super structure or any level excluding cost of centring and shuttering cement and reinforcement. m20 rcc pcc taking delivery from store or departmental yard bend bind and place the following types of reinforcement in all types of reinforced concrete work at all elevations including cleaning straightening cutting bending and binding with 18 swg annealed wire or with welding such as tack lap butt etc with approved electrodes providing concrete cover blocks pin chairsnails supports of reinforcement etc. with all materials and labour complete as per drawings specifications and directions of engineer excluding cost of reinforcement. install dismantle and remove the form work of approved quality including splay recess corners haunch etc. scaffolding necessary rendering of concrete surfaces after exposure including cost of all material and labours at all elevations. supply and laying in position brick work with designate 75 bricks in super structure etc in cement coarse sand mortar 1 isto 6 including mixing mortar laying bricks raking joints curing etc complete with all materials and labour as per drawings and specifications excluding cost of cement. providing and fixing 125 into 63 mm m. s. hinges of approved quality and make. providing and fixing isi marked anodised aluminium tower bolt black finish barrel type with necessary screws etc. complete 300 into 10 mm providing and fixing isi marked anodised aluminium tower bolt black finish barrel type with necessary screws etc. complete 150 into10 mm providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete. providing and fixing aluminium extruded section body tubular type universal hydraulic door closer having brand logo with is 3564 embossed on the body door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm with double speed adjustment with necessary accessories and screws etc. complete. providing and fixing aluminium handles isi marked anodised anodic coating not less than grade ac 10 as per is 1868 transparent or dyed to required colour or sh

State Government

CTN :39177095

11 Feb, 2025 NA

Etah - Uttar Pradesh

Tender For supply of reinforced concrete fence posts bend type-ii (cement or concrete posts) (q3)

CTN :39070529

05 Feb, 2025 NA

Gwalior - Madhya Pradesh

Tender For bid to ras providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - buyer; modification of metal container; service provider - wood based particle boards, foam concrete (for insulation), fibre reinforced flat cement sheet, flooring, roof, doors, windows, air conditioner split (02tons), stabilizer for air conditioner, foldable bed, study table (3x3) feet, chairs plastic, indoor & outdoor lights led, painting outside, labour charges included

CTN :39166696

10 Feb, 2025 NA

Ahmedabad - Gujarat

Tender For supply of reinforced concrete fence posts bend type-ii (cement or concrete posts) (q3)

State Government

CTN :39161556

13 Feb, 2025 8.56 Lacs

Kottarakkara - Kerala

Tender For this work consists of earth work in excavation,cement concrete, centering and shuttering, reinforced cement concrete work, steel reinforcement, cement plaster, water proofing

State Government

CTN :39149296

14 Feb, 2025 78.26 Lacs

Kottarakkara - Kerala

Tender For this work consists of construction of reinforced cement concrete work of column,beam and slab,steel work,blockwork,shuttering,plastering, floor tiling ,aluminium fabrication work, painting and plumbing work

State Government

CTN :39112226

07 Feb, 2025 45.00 Lacs

Rajkot - Gujarat

Tender For supplying and stacking various type of building, road and other construction materials at various places all village of taluka lodhika, dist. rajkot under taluka panchayat lodhika under mgnrega 2024-25-26 (annual unit rate) - hire charges of concrete mixer 0.25 to 0.40cum with hopper, hire charges of diesel road roller 8 to 10tonne, hire charges of diesel truck 9 tonne, vibrator (needle type 40mm), surface vibrator, generator 250 kva, tractor with trolly, water tanker 5000 ltr. capacity, dozer d-80-a12, vibratory roller 8 to 10 tonne, tenmem road roller, watertanker 5 to 6 kl capacity, hire charges of diesel truck- 9 tonne (without pol), hire charges of drill machine upto 30mm dia, hire charges of compressor, bandhani, blacksmith 1st class, blacksmith 2nd class, carpenter 1st class, carpenter 2nd class, fitter (grade-1), assistant fitter or 2nd class fitter, glazier, mason ( for plaster of paris work ) 1st class, mason (brick layer) 1st class, mason (brick layer) 2nd class, mason (for plain stone work) 2nd class, mason (for ornamental stone work) 1st work, mate, mistry, painter, rock excavator, rock breaker, rock hole driller, stone chiseller, sprayer (for bitumen, tar etc), white washer, mason (average), carpenter (average), operator (pile / special machine), skilled torch operator for laying tack, helper (technician), seam bolts and nuts 6mmdia and 25mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6mm thick, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size):50 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 12.5 mm nominal size

CTN :39070078

14 Feb, 2025 NA

Jamnagar - Gujarat

Tender For custom bid for services - provision of standby pump and associatedworks at main water supply pump house at af station samana-1. supply, installation and commissioning of submersible pump set 30 hp having discharge of 1650-500 lpm and head 47-78m electric driven 415 v, tp suitable open well (outlet size for 80*65mm dia) supply and install complete inclusive of 20 meter long 25 sqmm 3 core flat submersible cable, chain for supporting and taking out set mounting arrangement. nos 01, 2. supply, install, testing and commissioning and testing factory made and tested (including cpri type test certified) lt feeder pillar box (kiosk) outdoor type, platform mounted, suitable for 415 volts 3 phase 4 wire, 50 hz ac supply system, all as specified and directed, having bus bar chamber with insulated copper bus bars 350 amps rating installed on porcelain insulators. the panel shall be dust and vermin proof, made of 3.15mm crca ms sheet 75mm x 30mm thick ms channel frame, duly powder coated finish. front opening type with aprons for cable entry with double door shitter and locking arrangement, danger plate and earthing terminal. the scope of work includes pcc foundation and provision of the following :- incoming (a) mccb 4 pole 200 amps, 36 ka, 415 v - 01 nos (b) bus bar aluminum strip 400 amp, 4 pole, for in comp supply - 01 nos (c) digital panel meter including cts - 01 no outgoing (a) mcb tpn 40 amp 6 ka, 415 v 50 hz - 02 nos (b) mccb tpn 80 amp 16 ka, 415 v 50 hz - 01 no (c) star delta starter panel with suitable thermal overload protection, sppr, overvoltage, overcurrent and surge protection for 30 hp - 02 nos (d) low water level motor cutoff sensor with wire 20 mtr - 02 nos (make gic or slect control pvt ltd.). each 01, 3. supply and fix pressure guage upto pn-40 rating all as specified and as directed by engineer-in-charge. each 10, 4. supply and fixing hdpe pipe 90 mm dia pn 16 pressure rating with connected items all as specified and as directed by engineer-in-charge. rm 15, 5. supply and fix, gi sluice valve confirming to is 13095, 100 mm (4 ) dia with flanges end v all as specified and directed by engineer-in-charge., 6. material and labour in replacement for construction of valve chamber of size 1200 x 900 x 900 mm deep dimensions (over all internal dimension) for sluice valve etc. with pcc foundation, pcc block masonry walls, plastering, pcc coping, white washing, mild steel chamber cover, painting to chamber cover including excavation and earth work in any type of soil complete all as specified below :- valve chamber shall be provided with the following specifications :- (i) cement concrete for foundation (1:4:8) type d2 using 40mm graded stone aggregate 150mm thick extended upto 150 mm beyond the outer face of block masonry. (ii) walls of valve chamber 200 mm thick with precast cement concrete (1:5:8) (using 20 mm graded stone aggregate) solid building blocks, setting in cm 1:6 complete. (iii) internal and exposed surfaces of valve chamber both concrete and block masonry surface shall be plastered with cm 1:4 15 mm thick finished even and smooth. (iv) 50 mm thick coping in pcc 1:3:6 type c1 over block masonry wall. (v) entire plastered surfaces shall be treated with 3 coats of white wash. (vi) chamber cover shall be of 6 mm thick fiber reinforced polymer (frp) sheet with 30 x 30 x 5 mm size angle iron frame with hold fast and locking arrangement. steel furface shall be painted with two coats of synthetic paint of first quality over one coat of red oxide primer. each 01, 7. supply and fix 100 mm non return valve conforming to is 13095, 100 mm (4 ) dia with flanges end all as specified and directed. each 02, 8. supply and fix galvanized iron heavy grade pn 16 rating y section with flanged end 2 openings 100 mm dia and one 180 mm dia with suitable flanges and bots flanges end v all as specified and directed. kg 25-msme exemption - yes | startup exemption - yes

Masonry Block Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

State Government