Latest mechanical loading Tenders | Government mechanical loading Tenders

State Government

CTN :39697336

15 Apr, 2025 16.08 Lacs

Kheda - Gujarat

Tender For hiring of 9 to 20 ton mobile hydra crane as and when required for material handling work on rate contract for 18 months at gsecl, wtps.

Central Government/Public Sector

CTN :39753954

01 Apr, 2025 65.38 Lacs

Bhagalpur - Bihar

Tender For custom bid for services - deployment of 14 nos safety stewards at ntpc kahalgaon-work of safety stewards in hsw category: - 1. to provide training/pep talk to the site workers / briefing about plant safety to visitors / issuing ppes to visitors& collection after visit. maintain training /pep talk/ safety park visit/ describe /explain about safety park arranging and helping in vertigo test keep, maintain amc records of workers in the direction of eic. 2. to go round the site with a view to check unsafe act/unsafe conditions and to suggest remedial measures on the spot or with the consultation of concerned eics/ntpc safety o icer. 3. to monitor for strict implementation of safety norms. 4. to look into health hazards associated with the site activities while handling di erent types of material and ensure the proper use of personal protective equipments. 5. to advise site-in-charge to stop unsafe practices, if any imminent danger is observed while carrying out the activities at site and issue a warning notice on the spot and also intimate to engineer-in-charge / ntpc safety o icer immediately. 6. regular discussion with engineer-in-charge / ntpc safety o icers regarding various unsafe condition / practices observed at site. 7. in addition to above safety stewards shall be responsible to monitor the safety control room, visitors room and ptw system on the site round the clock along with associated jsa and hira and ensuring all safety measures are compiled before taking up the work. 8. daily logbook will be maintained by safety stewards regarding their observations at site for unsafe conditions /unsafe acts and to discussed with concerned eic. 9. monitoring overhauling site 10. assisting in safety department o icials as and when required for departmental works. 11. to verify all tools/tackles and equipment s of various agencies are adequate and safe for use and collect the test certificates of the same and submit it to safety department. 12. active participation in conducting all the safety promotional activities. 13. any other assignment as per the directions of eic..

Central Government And Public Sector

CTN :39667038

02 Apr, 2025 2.91 Crore

Palghar - Maharashtra

Tender For process piping, structural steel and equipment erection work of ventilation system for oesc building at taps-3 and 4 site. - structural steel work using angles, channels, joists and other sections at all levels including supply, cutting, fabricating, welding, hoisting, erecting & fixing in position, complete all as per specifications, drawings and as directed by the engineer in charge., welding of cs-cs pipe, pipe fittings and components, including fit up, root with gtaw/smaw with or without purging and completion of weld joints by gtaw/ smaw (bw/nw), welding of cs-cs pipe, pipe fittings and components, including fit up, root with gtaw/smaw with or without purging and completion of weld joints by gtaw/ smaw (sw/fw), welding of ss to ss, cs to ss, ss to alloy steel pipe, pipe fittings and components, including fit up with or without consumable insert, root with gtaw/smaw/open root with or without purging and completion of weld joints by gtaw/ smaw (bw/nw), welding of ss to ss, cs to ss, ss to alloy steel pipe, pipe fittings and components, including fit up, root with gtaw/smaw/open root with or without purging and completion of weld joints by gtaw/ smaw (sw/fw), erection of pipes and pipe fittings components on permanent hangers including cleaning, cutting in required size, handling from engineers store as per specifications, drawings and as directed by the engineer in charge., supply, fabrication, erection of grill mounting cs collar from cs plate of 3 mm thickness and welding it to cs duct by gtaw/ smaw (sw/fw), execution of liquid penetrant testing of all joints such that root nad final dpt of bw/nw joints and final dpt of sw/fw joints including supply of consumables required for performing liquid penetrant test as per npcil approved brand list (the witness authority will be npcil qa during execution), supply galvanised full threaded rod of 22 mm dia with its nut assembly and coupler that is to be used for providing hanger type support for ducts and pipes., supply of fasteners, nuts and washers of 8.8 grade in different sizes and u-bolt with nut assembly for pipeline of different sizes from 15 nb to 550 nb as per requirement/drawing., installation of hsl anchor fastners up to m-16 size supplied by npcil including drilling of holes,tightening of fasteners and deployment of required tools, machinery and consumables as per specifications, drawings and as directed by the engineer in charge., shifting and installation of various equipments and components like combined hepa charcoal filter, hepa filter, centrifugal fans as per drawing, shifting and installation of grilles of different sizes in the duct collar as per drawing, shifting and installation of oxygen cylinder in designated area as per drawing, shifting & erection of ultrasomic decontamination chamber with filteration equipments related piping & structure as per section-v, shifting & erection of laundry equipments inside oesc building as per section-v, shifting & erection of liquid effluent transfer pump inside oesc building, as per section-v, shifting & erection of 01 t manual hoist inside oesc building, as per section-v, providing one coat of zinc phosphate epoxy primer and applying two finish coats of polyurethene paint with a dft of minimum 50 microns of approved make and shade including surface preparation by application of wire brush, emery cloths, power tools wherever required to remove dirt, rust and all loose material at various elevations/ all heights includes protecting and cleaning the areas, applicable total gst rate (%) included in the quoted price:, cgst rate(%), sgst rate(%), igst rate(%)

Central Government/Public Sector

CTN :39679625

27 Mar, 2025 NA

Sonbhadra - Uttar Pradesh

Tender For custom bid for services - work comprises of combined job contract of chemistry for ntpc rihand-line item 10. job of chemistry st-i, ii &iii item 10.10 1. the scope of work involves deployment of one or two open pick up jeep/ truck/ tractor trolley for 08 hrs. for transportation of material -bulk chemicals from store to site and/or from one place to another within plant and township as per the instructions of eic. 2. the open pick up jeep/ truck/ tractor trolley (one or two nos) with fuel, driver, helper and required numbers of manpower for min. 10 mt material. handling within 08 hrs. of deployment in a day is to be considered. 3. the payment will be done based on tonnage of material. handled in a day. for calculation of rate per mt, total tonnage of min.10 mt per day is to be considered. cost of deployment for transportation of 10 mt material shall be inclusive of cost of hiring of vehicle with driver, helper along with cost of fuel for total running of 50 km in a day and 4 nos. of usw (04-man days of usw) for material handling. this is only for the purpose of rate calculation on tonnage basis for transportation of bulk chemical. hiring charges of vehicle taken from rihand system circular 20/03 for hiring of vehicle. 4. quantity per trip and the number of trips in a day shall be decided by the eic. 5. the tractor deployed by the agency must be in good working condition and should have valid papers; viz, registration, fitness and insurance and driving license of the driver. 6. eic may call for deployment of tractors at short notice on any day/ time as per requirement. 7. a penalty equal to double the rate (10 mt) admissible shall be imposed in case of failure of deployment as per instruction. 8. rate admissible on firm price basis. price variation on the grounds cost of hiring/ fuel price and/or manpower cost shall not be admissible during the tenure of contract. item 10.20 1. transportation of material, bulk chemicals, lab. consumables, lab. instruments, gas cylinders, office furniture etc. from store to site; scrap, solid waste, debris and coal from one place to another within plant and township area as per the instructions of eic. open pick-up jeep/ truck/ tractor trolley with required numbers of laborers is to be provided for the purpose. 2. the payment will be done based on the trip a day. loading of material in tractor at one site, its transportation, unloading and stacking of material at the destination site shall constitute one trip. 3. for calculation of rate per trip, min. two trips in 8 hrs. deployment per day is to be considered. cost of deployment for 2 trips per day shall be inclusive of cost of hiring of vehicle with driver, helper along with cost of fuel for total running of approx. 40 km in a day and 2 nos. of usw (02-man days of usw) for material handling. this is only for the purpose of calculation of rate per trip for transportation of material mentioned above. hiring charges of vehicle taken from rihand system circular 20/03 for hiring of vehicle. 4. quantity of material per trip and the number of trips in a day shall be decided by the eic. 5. vehicle deployed by the agency must be in good working condition and should have valid papers; viz, registration, fitness and insurance and driving license of the driver. 6. eic may call for deployment of vehicle at short notice on any day/ time as per requirement. if required two vehicle may deployed. 7. a penalty equal to double the rate admissible shall be imposed in case of failure of deployment as per instruction. technical specification section -v 8. rate admissible on firm price basis. price variation on the grounds cost of hiring/ fuel price and/or manpower cost shall not be admissible during the tenure of contract. item 10.30 1. the job involves shifting of bulk chemicals, reagents to different sites in general shift. batch wise preparation of different bulk chemical solution for pt and dm plant area in general shift including sundays & holidays. 2. c

Central Government / Public Sector

CTN :39671177

26 Mar, 2025 NA

Kamrup - Assam

Tender For custom bid for services - inst shutdown jobs for tps dmp for 2 years at gr tender no 9010c25g44-1.skilled & unskilled jobs at tps & dm plant of guwahati refinery include all works that are to be carried out as per the instructions of the engineer-in-charge / site-in-charge during m&i shutdown. 2.electricians shall be responsible for field and control room wiring/cabling, termination, cable glanding, lugging, ferruling etc. as per the direction of engineer -in-charge. 3.fitters shall be responsible for tubing (ss tube, cu tube), cabling, cable tray laying, jb installation etc. 4.welders shall be responsible for fabrication jobs (impulse piping, support modification, cable route modification jobs, new installations of transmitters / valves etc. 5.helpers shall be required for rigging assistance to carry out all transportation, material handling & cleaning jobs and to assist electricians, fitters & welders to execute all instrument related jobs. 6.during the execution of the work, if the contractor is found lacking in skill/ experience/ mobilization, the contract will be forthwith discontinued. 7.iocl will not provide any extra cost for site supervisor. bidder to consider the same during price bid quotation. b. shutdown specific scope of work: 1. cable laying of different instrument cables multi-pair and single pair (signal / power / control / alarm / thermocouple / rtd / fo etc.) of different sizes and types (armoured/unarmoured) in existing cable trenches including routing through mct blocks. scope of splicing of fo cable is in vendor scope. 2.cable testing and transportation from stores to site, unpacking, straightening, dressing of cable & returning the empty drums with unused cable, if any to stores. 3.glanding & termination of signal/control/triad/t/c and power cables with double compression type ss cable glands. 4.cable termination at device end, junction box end and marshalling end shall be carried out under the supervision of m/s iocl. 5.loading, unloading and shifting of material from store / fire & safety etc. to site in all the sections of guwahati refinery. 6.dismantling and installation of misc. instruments, junction box, cables, cable glands, cable trays etc. under the supervision of m/s iocl. 7.laying and fabrication of ss / cu tubes as directed by site engineer. 8.dismantling and installation of control valves / on-off valves / their accessories / positioner mounting / air filter regulator cleaning / replacement etc. shall be carried out under the supervision of m/s iocl. 9. bidder is solely responsible for execution of each work executed by him / by his worker. for any nonstandard execution of the performed job , eic/sic may asked to repeat the job for correction purpose without paying any extra amount. 10.heavy equipment (i.e. tractor trailer & hydra) required for dismantling, transportation & installation of valves/equipments shall be in scope of contractor.

Central Government/Public Sector

CTN :39587178

28 Mar, 2025 NA

Bangalore - Karnataka

Tender For bangalore -jolarpettai section: collection and supply of ballast (74800cum) including mechanical loading etc. at tcl depot in connection with the works of 1. sbc-jtj sec: tbr (p and c) - 12nos 2. ttr - 22nos of p and c 3. sgt yard - construction of pit line - 150m at rd.1 kjm end 4. tbr (p&c) - 11nos. at mlo, dkn, whpc, kjm 5. ttr - 10sets at bwt, vrdp, bsm yards 6. ttr - 10nos in wfd section 7. isd - 5.3kms from km 231/300-236/600 8. isd - 5.2kms from km 336/300-241/500 9. isd - 21.4kms from km 220/700-231/300 and 240/200-251/000 up line 10. tbr - 19.945kms in loop lines of aden/sbc and bwt 11. tsr(p) - 1.065km from km 132/800-133/000 and 146/635-147/500 in bwt sec 12. trs(p) - 1.152kms isolated locations from km 351/930-353.864 on curve no. 9,10,11,12 up line. and tfr - 1.379kms in isolated locations from 352/305-354/566 up line in sbc sec 13. tsr(p) - 1.193km from km 352/753-966, 352/966-353/546, 353/704-864, 354/578-908 dn line (curve no.10,11,12,16) in sbc sec. and tfr - 0.553kms from 352/200-753 (dn line) (curve no. 13) in sbc sec.

CTN :39595685

27 Mar, 2025 NA

Thiruvarur - Tamil Nadu

Tender For providing of hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - material handling equipment; material handling through pallet type 2 ton battery trucks as per scope of work; firm should provide new battery operated platf..

CTN :39594846

27 Mar, 2025 27.25 Lacs

Raebareli - Uttar Pradesh

Tender For providing of handling and transport on lumpsum basis - hiring of 70 or 80 feet trailer with driver on rental basis for material handling at different stages of shell shop as per scope of work for 600 days