Latest mechanical material Tenders | Government mechanical material Tenders

corporations/Associations/Others

CTN :38485924

10 Feb, 2025 5.00 Lacs

Noida - Uttar Pradesh

Tender For corrigendum : details of work and quantity against short term e-tender no. 47/eudc-i/2024-25/noida (works) for carrying out the work checking the electrical/mechanical system of lt acb installed/installed at various lt sub-stations in the area of eudsd under eudd-i/v, noida and providing all the material and labour, and rectifying the defects found in the juridiction of eudc-i, noida.

CTN :39120389

10 Feb, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : sup of various mechanical spares and material for workshop under aeww(m)ws/north division

CTN :39204611

09 Feb, 2025 NA

Mumbai - Maharashtra

Tender For procurement of various material for mechanical repair of section chowkies in c ward swm department

Central Government/Public Sector

CTN :39195831

25 Feb, 2025 13.89 Lacs

East Singhbhum - Jharkhand

Tender For annual civil maintenance work at turamdih mines - earthwork in excavation in the following types of soil and rock up to and including 1.5 mtr. lead including bailing or pumping out any water accumulating inside the excavated pit or trench shoring strutting adequate protection to be taken during excavation transporting the excavated soil for all lead stacking selectively including disposing off the rubbish rock fragments excess spoils etc. lead upto 100 mtrs. in the area as directed by the engineer all complete as per drawing specification and direction of the engineer. earth work in back filling with available earth including watering and compaction at all elevations around foundations walls wells tunnels pitsculverts trenches road approaches and in plinth filling and area filling as per specifications and drawings and as directed by the engineer with selected spoil within a lead of 100 mtr. disposal carriage of rubbish waste rock earth etc.dumped stacked at site by mechanical means including loading unloading and dressing properly lead upto 5 km. and up to any lift includind cost of all labours and equipments. surface dressing of the ground in all kinds of soil including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead up to 50 m and lift up to 1.5 m. supply mix place in position compact cure cement concrete 1 cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size below foundations walls wells pits trenches etc. and in basin lining as per specifications drawings and directions of the engineer and including cost of centring and shuttering but excluding cost of cement. supply mix place in position compact and cure including testing of concrete specimens finishing surfaces as per specifications drawings and directions of the engineer of the following grades of concrete with 20mm and down graded stone aggregate and coarse sand in super structure or any level excluding cost of centring and shuttering cement and reinforcement. m20 rcc pcc taking delivery from store or departmental yard bend bind and place the following types of reinforcement in all types of reinforced concrete work at all elevations including cleaning straightening cutting bending and binding with 18 swg annealed wire or with welding such as tack lap butt etc with approved electrodes providing concrete cover blocks pin chairsnails supports of reinforcement etc. with all materials and labour complete as per drawings specifications and directions of engineer excluding cost of reinforcement. install dismantle and remove the form work of approved quality including splay recess corners haunch etc. scaffolding necessary rendering of concrete surfaces after exposure including cost of all material and labours at all elevations. supply and laying in position brick work with designate 75 bricks in super structure etc in cement coarse sand mortar 1 isto 6 including mixing mortar laying bricks raking joints curing etc complete with all materials and labour as per drawings and specifications excluding cost of cement. providing and fixing 125 into 63 mm m. s. hinges of approved quality and make. providing and fixing isi marked anodised aluminium tower bolt black finish barrel type with necessary screws etc. complete 300 into 10 mm providing and fixing isi marked anodised aluminium tower bolt black finish barrel type with necessary screws etc. complete 150 into10 mm providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete. providing and fixing aluminium extruded section body tubular type universal hydraulic door closer having brand logo with is 3564 embossed on the body door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm with double speed adjustment with necessary accessories and screws etc. complete. providing and fixing aluminium handles isi marked anodised anodic coating not less than grade ac 10 as per is 1868 transparent or dyed to required colour or sh

Central Government / Public Sector

CTN :39195131

17 Feb, 2025 NA

Panipat - Haryana

Tender For tender for supply of hydraulic fl spreader,5 mt ; spreader, flange size mm ; hydraulic flange spreader capacity: 5mt ;hydraulic flange spreader kit (kit includes spreading tools, hand pump, hydraulic hose, pressure gauge, gauge adaptor,couplers and accessories) capacity 5 ton wedge : 3-28 mm (aprox) bolt size: 19-28 mm (approx) pressure rating700(+/-20) bars cylinder type : single-acting, spring-return type. ss quick coupler with ss nipple and dust cap. includes incarry case: 1 x spreading tool with threaded coupler 1 x 2m hydraulic hose with threaded couplers on both ends with end guards anddust caps 1 x 700(+/-20) bars hand pump, gauge, gauge adaptor <(>&<)> coupler 1 x instruction manual 1 x carry case supply ofspares : one set of pump <(>&<)> spreader repair kit along with seal, o-ring <(>&<)> gasket. make: power team/ hi-force/gemini/ torqup/ enerpack/ griphold/ holmetro/ gedore/ hydropac/ powerpac/ hydratight, hydraulic fl spreader,10mt ; spreader, flange size mm ; hydraulic flange spreader capacity: 10mt ;hydraulic flange spreader kit (kit includes spreading tool, hand pump, hydraulic hose, pressure gauge, gauge adaptor,couplers and accessories) capacity 10 ton wedge : 3-28 mm (aprox) bolt size: 31-41 mm (aprox) pressure rating700(+/-20) bars cylinder type : single-acting, spring-return type. ss quick coupler with ss nipple and dust cap. kitcomponents: 1 x spreading tool with threaded coupler 1 x 2m hydraulic hose with threaded couplers on both ends with end guards anddust caps 1 x 700(+/-20) bars hand pump, gauge, gauge adaptor <(>&<)> coupler 1 x instruction manual 1 x carry case supply ofspares : one set of pump <(>&<)> spreader repair kit along with seal, o-ring <(>&<)> gasket. make: power team/ hi-force/gemini/ torqup/ enerpack/ griphold/ holmetro/ gedore/ hydropac/ powerpac/ hydratight , puller,brg,40-250mm ; puller type: bearing size capacity mm/inch tonnes ; 40 - 250mm ; mechanical bearing puller as per following specification: 1. heavy duty sliding design 2. puller tobe equipped to protect spindle and tommy. 3. puller should be self-locking and self-centring. 4.minimum jaw dia: 40-45 mm maximum jaw dia: 250-270 mm maximum reach: 300-340 mm number of jaws: 3 5.vendor must submit the technical specification and catalogue of the offered product for technicalacceptance. all the necessary accessories and warranty certificate for 12 months from date ofreceipt material.vendor should give complete specification and operating manual along with theoffer. 6. the item should be supplied with test certificate as per the standard.

CTN :38893665

05 Feb, 2025 NA

Budgam - Jammu And Kashmir

Tender For bid to ras supply of heavy duty steel full bullet proofing of mahindra scorpio vehicle with bp sheet 6 point 5 mm for 2 x scorpio and 1 x 2.5 ton , 50 mm z glass extra clear set front wind screen 04 doors diki door and 1 front mirror complete set for scorpio , heavy duty suspension and mechanical work with spares 2 scorpio , full vehicle computerised matt finish panting with material for scorpio , sealant tube original for fixing of glasses 2 scorpio and 1 x 2.5 ton vehicle , nut bolts , f3d matting full set for scorpio , all glasses black film for 2 scorpio , poly carbonate fibre sheet for floor splinter proof of 2 scorpio and 1 x 2.5 ton , mig roll for sheet welding , bp sheet cover full set with material for 2 scorpio , glass bp frames with material for scorpio , labour fitting charges of two scorpio and one 2.5 ton , 50 mm bullet proof with pupc extra clear glass wind shield front glasses 33 inches by 24 inches for 2.5 ton , 50 mm bullet proof with pupc extra clear glass driver co-driver 18 inches by 12 inches for 2.5ton , 50 mm bullet proof with pupc extra clear glass right left and rear side of body 8 inches by 12 inches for 2.5 ton , full vehicle computerised paint with material internal and external for 2.5 ton , heavy duty hydraulic jack with container for cabin up and down for 2.5 ton , normal iron sheet for roof top of 2.5 ton vehicle , door lock rh and lh and rear side of 2.5 ton vehicle , welding rod , plasma cutting wheel , normal iron pati for glass frames with material for 2.5 ton , heavy duty hinges for doors of 2.5 ton vehicle , heavy duty hinges for doors of two scorpio vehicle , hinges and lock for kapola of 2.5 ton vehicle , beeding with material for kapola of 2.5 ton vehicle , safety net for glasses with material of 2.5 ton vehicle , angle for safety net of 2.5 ton vehicle , 2 inches iron pipe for doors frame of 2.5 ton vehicle , 1 inch iron pipe for kapola frames 20 feet , gun slot for 2.5 ton

CTN :39186353

22 Feb, 2025 1.02 Crore

Kupwara - Jammu And Kashmir

Tender For supply of diy 2 in 1 programmable and non programmable project based learning electronics kit , 3d pen kit , programmable diy kit , mechanical construction kit , non programmable activity project based learning electronics kit , diy stem kit , interactive models , diy math kit , basic electronics kit , telescope , mars rover kit , ai based robotics kit , code cruiser bot , coding bot kit , wirless armbot , 3d printer , filament , learning management solution lms , study material books , project sunboard based cutouts , working table rectangular , 3d printer table , stool , storage shelf , vinyl and posters 20 nos , smart furniture-two seated classroom bench dual desk

CTN :39180247

06 Feb, 2025 NA

Mumbai - Maharashtra

Tender For procurement of various material for mechanical repair of section chowkies in c ward swm department

State Government

CTN :39148837

11 Feb, 2025 NA

Deoghar - Jharkhand

Tender For due to non-availability of mechanical materials used for mechanical work of dam/reservoir/weir/canal under the water resources department of jharkhand government

CTN :39155378

17 Feb, 2025 NA

Kharagpur - West Bengal

Tender For supply of axle cap bolt, size m 36 x 110 mm x 78mm (l) with spring washer to cee's drg. no. loco/4/ae/257, mechanical property/material specification to is-1367, pt -3/91 and is-13 64 , pt-1/92, with property class - 10.9 and is-3063 type-b for spring washer for wag 7 & w ap4 locos. [ warranty period: 30 months after the date of delivery ]

Mechanical Material Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Central Government / Public Sector

State Government