Latest metal scaffold Tenders | Government metal scaffold Tenders

State Government

CTN :39387236

26 Feb, 2025 9.83 Lacs

Karaikal - Pondicherry

Tender For supply of material for the work of construction of harvesting structure thrashing floor including pucca storage near pottamuckal vaikal at nedungadu village panchayat in nedungadu commune (2nd call) - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement, collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5, hire charges of wall form panel 1250x500 mm, hire charges of 100mm channel shoulder 2.5m long, hire charges of double clip (bridge clip), hire charges of single clip, hire charges of m.s.tube 40mm dia, supply of twisted steel / deformed tmt bars fe-500d, hire charges of flame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply of dehradun white lime, supply of welding by electric plant, supply of mild steel tubes hot finished welded type., supply of red oxide zinc chromate primer, supply of galvanised steel j or l hooks 8mm dia, supply of precoated galvanised iron profile sheet 0.5mm tct, supply of mild steel sheetsof 1.00mm thickness for tanks, supply of structural steel such as tees, angles channels and r.s.joists, supply of iron pintels including welded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer, supply of c.i.pile shoe, supply of m.s.clamps for pile shoe, hire charge for loader including operating staff,diesel& lubricant oil etc,complete., hire charge for hydraulic excavator (3d) with driver and fuel including operating staff,diesel& lubricant oil etc,complete., hire charge for vibrator(needle type 40mm) including operating staff,diesel& lubricant oil etc,complete., hire charges of concrete mixer 0.25 to 0.40 cum with hooper including operating staff,diesel & lubricant oil etc,complete., hire charge of hydraulic piling rig with power unit etc.,complete accessories and shifitin including operating staff,diesel& lubricant oil etc,complete., hire charge for pumping of concrete-h/c of pump, piping work, & accessories etc including operating staff,diesel& lubricant oil etc,complete., hire charge production cost of concrete by batch mix plant(rolling every layer and top-most layer ) including operating staff,diesel& lubricant oil etc,complete., supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

State Government

CTN :39387237

26 Feb, 2025 11.28 Lacs

Karaikal - Pondicherry

Tender For supply of material for the work of construction of harvesting structure thrashing floor including pucca storage at konnakavaly in varichikudy village panchayat at kottucherry commune (2nd call) - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement, collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5, hire charges wall form panel 1250x500 mm, hire charges 100mm channel shoulder 2.5m long i, hire charges double clip (bridge clip), hire charges single clip, hire charges m.s.tube 40mm dia, supply of twisted steel / deformed tmt bars fe-500d, hire chargesflame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply of dehradun white lime, supply of welding by electric plant, supply of mild steel tubes hot finished welded type, supply of red oxide zinc chromate primer, supply of galvanised steel j or l hooks 8mm dia, supply of precoated galvanised iron profile sheet 0.5mm tct, supply of mild steel sheetsof 1.00mm thickness for tanks, supply of structural steel such as tees, angles channels and r.s.joists, supply of iron pintels including welded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer, supply of c.i.pile shoe, supply of m.s.clamps for pile shoe, hire charge for loaderincluding operating staff,diesel& lubricant oil etc,complete., hire charge for hydraulic excavator (3d) with driver and fuelincluding operating staff,diesel& lubricant oil etc,complete., hire charge for vibrator(needle type 40mm)including operating staff,diesel& lubricant oil etc,complete., hire charges of concrete mixer 0.25 to 0.40 cum with hooperincluding operating staff,diesel& lubricant oil etc,complete., hire and running charges for light crane including operating staff,diesel& lubricant oil etc,complete., hire and running charges for ofhydraulic piling rig with power unit etc.,complete accessories and shifitin at site including operating staff,diesel& lubricant oil etc,complete., hire charge for pumping of concrete including-h/c of pump, piping work, & accessories et, production cost of concrete by batch mix plant ncluding operating staff,diesel& lubricant oil etc,complete., supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

State Government

CTN :39242390

20 Feb, 2025 17.79 Lacs

Pondicherry - Pondicherry

Tender For corrigendum : supply of material for the work of construction of post harvesting facilility structure and pucca storage facilities at soriankuppam village panchayat in bahour commune of ariyankuppam block, puducherry. - [ psr code no.0983 - pdy ] supply of fine sand (zone iv), [ psr code no.0810 a - pdy ] supply of gravel, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of vibrator (needle type 40 mm), supply of portland cement, [ psr code no.0295 - pdy ] supply of stone aggregate (single size) : 20mm nominal size, [ psr code no.0982 - pdy ] supply of coarse sand (zone iii), [ psr code no.0293 - pdy ] stone aggregate:40mm nominal size, [ psr code no.0297 - pdy ] supply ofstone aggregate (single size) : 10 mm nominal size, supply of common burnt clay f.p.s. (non modular) bricks class designation 3.5, hire charges of wall form panel 1250x500 mm, hire charges of 100 mm channel shoulder 2.5 m long, hire charges of double clip (bridge clip), hire charges of single clip, hire charges of m.s. tube 40 mm dia, supply of twisted steel/deformed bars, [9999a] supply of m30 grade cover block, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply of flame retardant face inslulating, impregnated fibre board 12 mm thick, supply of deharadun white lime, hire charges of a welding by electric plant, supply of mild steel tubes hot finished welded type, supply of red oxide zinc chromate primer, supply of precoated glavanished iron profile sheet 0.50 mm tct, supply of g.i. plain washer thick, supply of bitumen washer, supply of galvanised steel j or l hooks 8 mm dia, supply of mild steel sheets for tanks, structural steel such as tees, angles, channels and r.s. joists, supply of iron pintels including weldded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of mild steel hooks, supply of synthetic enamel paint in black or chocolate shade, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, production cost of concrete by batch mix plant, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of c.i. pile shoe, hire charges of m.s. clamps for pile shoe, supply of plasticizer / super plasticizer, providing one number of citizen information board of size 0.90 x 1.20m for community work as per the standard drawing of mord. mgnrega (r.c.c. precast)

State Government

CTN :39242391

20 Feb, 2025 15.85 Lacs

Pondicherry - Pondicherry

Tender For corrigendum : supply of material for the work of construction of post harvesting facilility structure and pucca storage facilities at sembiapalayam village panchayat in nettapakkam commune of ariyankuppam block, puducherry. - hire and running charge of loader, hydraulic excavator (3d) with driver and fuel, (psr code no.0983 pdy) fine sand (zone iv), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of vibrator ( needle type 40mm), supply of portland cement, (psr code no0295 pdy) supply of stone aggregate (single size) : 20mm nominal size, (psr code no.0982 pdy)supply of coarse sand (zone iii), (psr code no.0293 pdy) supply of stone aggregate : 40mm nominal size, hire charges of diesel road roller- 8 to 10 tonne, (psr code no.0810a pdy) supply of gravel, (psr code no.0297 pdy)supply of stone aggregate (single size) : 100 mm nominal size, hire charges of wall form panel 1250 x 500 mm for centering, hire charges ofdouble clip (bridge clip) for centering, hire charges of single clip for centering, common burnt clay f.p.s (non modular) brick class designation 7.5, supply of twisted steel / deformed bars, (9999a) supply of m30 grade cover block, hire charges of welding by electric plant, supply of mild steel tubes finshed welded type, supply of red oxide zinc chromate primer, supply of precoated glavanished iron profile sheet 0.50 mm tct, supply of galvanished steel j or l hooks 8mm dia, hire and running charges of hydraulic pilling with power unil etc. inclduing complete accessories and shifting at site, hire and running charges of light crane, production cost of concrete by batch mix plant, pumping charges of concrete including hire charges of pump piping work and accessories, supply of c.i pile shoe, supply of m.s clamps for pile shoe, supply of plasticizer / super plasticizer, supply of bitumen hot sealing compound grade a, supply of flame relardant face inslulating impregnated fibre board 12 mm thick, supply of mild steel sheets for tanks, supply of structural steel such as tees, angles, channels and r.s joists, supply of iron pintels including welded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of deharadun white lime, supply of synthetic enamel paint in black or chocolate shade, providing one number of citizen information board of size 0.90 x 1.20m for community work as per the standard drawing of mord. mgnrega (r.c.c. precast), 100mm channel shoulder 2.50m long, m.s tube 40mm dia

State Government

CTN :39268893

24 Feb, 2025 16.48 Lacs

Karaikal - Pondicherry

Tender For supply of material for the work of construction of post harvest structure including pucca storage at erukady aalamaram at t.r.pattinam (central) vp in t.r.pattinam commune (2nd call) - collection and supply of fine sand including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of gravel including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of portland cement, collection and supply of stone aggregate (single size) :40 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 20 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of stone aggregate (single size) : 10 mm nominal size including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of coarse sand (zone iii) including stacking to standard departmental gauage for pre-measurement at the site as directed by the engineer-in-charge., collection and supply of common burnt clay f.p.s (non modular) bricks class designation 3.5, hire charges wall form panel 1250x500 mm, hire charges 100mm channel shoulder 2.5m long i, hire charges double clip (bridge clip), hire charges single clip, hire charges m.s.tube 40mm dia, supply of twisted steel / deformed tmt bars fe-500d, supply of flame retardant face insulating , impregnated fibre board 12mm thick, supply of bitumen hot sealing compound : grade a, supply of bitumen solution primer of approved quality, supply of dehradun white lime, charges of welding by electric plant, supply of mild steel tubes hot finished welded type, supply of red oxide zinc chromate primer, supply of galvanised steel j or l hooks 8mm dia, supply of precoated galvanised iron profile sheet 0.5mm tct, supply of mild steel sheetsof 1.00mm thickness for tanks, supply of structural steel such as tees, angles channels and r.s.joists, supply of iron pintels including welded pin, supply of mild steel sheets with bolts and nuts to rest on pintels, supply of synthetic enamel paint in black or chocolate shade, supply of plasticizer / super plasticizer, supply of c.i.pile shoe, supply of m.s.clamps for pile shoe, hire charge for loaderincluding operating staff,diesel& lubricant oil etc,complete., hire charge for hydraulic excavator (3d) with driver and fuelincluding operating staff,diesel& lubricant oil etc,complete., hire charge for vibrator(needle type 40mm)including operating staff,diesel& lubricant oil etc,complete., hire charges of concrete mixer 0.25 to 0.40 cum with hooperincluding operating staff,diesel& lubricant oil etc,complete., hire and running charges for light crane including operating staff,diesel& lubricant oil etc,complete., hire and running charges for ofhydraulic piling rig with power unit etc.,complete accessories and shifitin at site including operating staff,diesel& lubricant oil etc,complete., hire charge for pumping of concrete including-h/c of pump, piping work, & accessories et, production cost of concrete by batch mix plant ncluding operating staff,diesel& lubricant oil etc,complete., supply and fixing of r.c.c. precast citizen name board size of 3.5 feet breadth, 6.00 feetheight and 2 inches thick with painting, drawing work, lettering the name board work. the rate includingcost of 1:2:4 p.c.c., earth work and refilling for fixing of post, loading unloading and transport charges etc.,complete as per the standard drawing of mord. mgnrega

CTN :39251793

25 Feb, 2025 NA

Raebareli - Uttar Pradesh

Tender For providing, fitting and shifting of precoatedgalvanized iron profile sheets of 0.60 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per is: 277 and fabrication of truss structure using ms angle of size 65 x 65 x 6 (for store area 12.68 mtr x 10.66 mtr) including labour, carriage, other required material like welding electrode ( esab or ador), screw, fastner, handle, roller, ms sheet, painting etc and t&p required to complete work at dalmau "b" pump canal distt unnao

Central Government/Public Sector

CTN :39051325

20 Feb, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : supply, installation, testing and commissioning of laboratory furniture, modular furniture and unified av solution for mbu, iisc bangalore - c-frame modular furnitureproviding and supply of c-frames manufactured from standard hollow metal sections; confirming to i.s. code 7138:1973 (indian standard specification for steel tubes for furniture) and all sheet metal components to be of crca confirming to is code 513:1994. the suspended under-bench fully welded units shall be supported on heavy-duty steel frames fully carrying the load of worktops.. its superior strength is combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout. c-frame shall be constructed from a rectangular pipe with a cross section of 60mm x 30mm and shall be 2 mm thick and shall be without a vertical front leg to give a clean look. the c-frame legs shall be supplied with adjustable feet (tolerance from -5mm to +20mm) to correct the unevenness of flooring. the tubular enclosed type construction shall discourage dust accumulation and unwanted development of bacteria & fungus. drainage gradient shall be well adjusted throughout the length of table and shall have horizontal supports for drainage systems. the structure shall have a removable back panel to provide access for maintenance throughout the length of table. the c-frame shall also have skirting at back bottom side. the c-frame shall be suitable for sitting and standing nominal heights of 750mm & 900mm respectively. the nominal table depths shall be 620 mm, 770 mm and 920 mm for wall side and 1540mm, 1840mm for island tables. the corner units shall fit well with 770mm & 920mm table depths. all frame-work is to be pre-treated with superior pure epoxy powder coated finish. all metal panel shall go through 9 tanks pretreatment process including 3 stages iron phosphating process. (process names: 1. hot water rinse -> 2. knock off degreasing -> 3. degreasing i -> 4. degreasing ii -> 5. water rinse i -> 6. water rinse ii -> 7. iron phosphating -> 8. water rinse iii -> 9. passivation), common 750 ht.c-frame assy. for table depths 770 wall side without upright , 1540 island without upright & 920 wall side with upright, l.h. 750 ht.c-frame assy. for table depths 770 wall side without upright , 1540 island without upright & 920 wall side with upright, r.h. 750 ht.c-frame assy. for table depths 770 wall side without upright , 1540 island without upright & 920 wall side with upright, common 900 ht.c-frame assy. for table depths 770 wall side without upright , 1540 island without upright & 920 wall side with upright, l.h. 900 ht.c-frame assy. for table depths 770 wall side without upright , 1540 island without upright & 920 wall side with upright, r.h. 900 ht.c-frame assy. for table depths 770 wall side without upright , 1540 island without upright & 920 wall side with upright, providing and supply of welded cabinets under bench floor mounted cabinets shall be flush face construction with doors and drawers in the same plane as the cabinet face frame, without overlap. the moc: ms crca: is 513 (1994). thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel shall be of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel shall be of 0.8mmthk.finish: powder coating pure epoxy, thickness 40-50 micronshandle: anodized aluminium finish handles (d-type or recess-type) lock: units have a locking facility with 180 deg. and 10 lever cam lock mechanism (except for sink and corner unit). hinge: ss 304 knuckle barrel hinge of thickness 2.5mm and opening angle 180 deg. screw: ss 304. ball slide: high quality double extension drawers of 500mm length (approved make) (required only for drawer unit) shutter is of twin type construction with sound dampening effect using profeel. shutter cover is equipping with bump on for sound dampening. depth of th

Metal Scaffold Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

Central Government/Public Sector