Get complete information related to latest Metal Structure Sale Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Metal Structure Sale Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Metal Structure Sale Tenders.
Tender For corrigendum : supply of material to gwm work at in ramathanl gp - add sundries charges at 1 percentage on material 1136284, broken stone aggregate 20 mm size 1136284, broken stone aggregate 12 mm to 10 mm size 1136284, coarse sand zone iii 1136284, portland cement 1136284, mixer concrete 1 cum capacity 1136284, add watering charges at 1 percentage on material 1136284, plasticizer or super plasticizer 1136284, hom of vibrator 0.71 days 1136284, tmt bars fe 500 1136284, binding wire 1136284, jungle wood runners and planks 1136284, silver oak or equivalent planks 38 mm thick 1136284, casurina poles 100 150 mm 1136284, add sundries charges at 2 percentage on material 1136284, add handling loading and unloading at 2percentage on material 1136284, m.s rods 1136284, ms flat 1136284, fitter class i 1136284, welder grade i 1136284, add hom of welding and grinding machine at 4percentage on material 1136284, add handling loading and unloading at 1percentage on material 1136284, ready mix primer paint ready mix red lead paint 1136284, add wire brush fine steel wool putty sand paper at 3percentage on cost of paint 1136284, painter class i 1136284, add providing and removing scaffolding at 3percentage on labour 1136284, enamel metal paint 1136284, add brush at 1percentage on cost of paint 1136284, pvc pipe of 6kgpercum90 mm 1136284, burnt bricks class 35 non modular 1136284, mixer concrete small used in culvert 1136284, filter media stone aggregates 1136284, laboratory asst. sslc passed or mate or supervisor 1136284, stone aggregatesingle size 40 mm nominal size 1136284, stone aggregatesingle size 20 mm nominal size 1136284, hydraulic excavator 0.9 cum bucket capacity at 60 cum per hr 1136284, tipper 5.5 cum with 10 tonne capacity 1136284, loading of earth as per item 1.1 ii 1136284, unloading of earth as per item 1.1 iv 1136284, dozer d50 for spreading at 200 cum per hr 1136284, motor grader at 50 cum per hr 1136284, water tanker 6 kl capacity 1136284, three wheel 80100 kn static roller 1136284, water 1136284, compensation for earth taken from private land 1136284, tractor 40 hp 1136284, plastic emulsion paint 1136284, add brush putty sand paper roller at 5percentage on cost of paint 1136284
Tender For corrigendum : the supply of materialsforthe construction of nrlm sanjeevini common work shed at mandalageri village under mgnregs scheme - g-kadd watering charges at 1 % on material, g-kadd sundries charges at 1 % on material, g-kmixer (concrete) - 1 cum capacity, g-kmixer (concrete small used in culvert), g-khom of vibrator 0.71 days, g-ksize stone 20 x 20 x 25 cms, g-kjungle wood runners and planks, g-kbroken stone aggregate 40 mm size, g-kbroken stone aggregate 20 mm size, g-kbroken stone aggregate 12 mm to 10 mm size, g-kboulders, g-kbond stone 20 x 20 x 45 cm, g-kplasticizer / super plasticizer, g-kform work for foundation upto plinth, g-kcoarse sand (zone iii), g-kportland cement, g-kover head & other miscellaneous charges, g-kadd watering charges at 1 % on labour, g-kadd sundries charges at 2 % on material, g-kadd handling , loading and unloading at 1% on material, g-kadd cutting and other wastage 5%, g-kmason class i (with tools), g-kunit cost as per the specification, g-khom of machinaries for planing, g-kms clamps, g-ktw beading for fixing glass, g-ktmt bars fe 500, g-kt section, g-kstays, g-ksilver oak or equivalent planks 38 mm thick, g-kreeded glass 2 mm thick, g-kmullion section, g-kmathi/nandi wood planks for panels 25 mm thick, g-khonnewood planks for panels 20 mm thick, g-khonne wood, g-khandles, g-kcasurina poles 75 - 100 mm dia, g-kcasurina poles 100 - 150 mm, g-kburnt bricks class 35 (non modular), g-kbinding wire, g-kadd handling , loading and unloading at 2% on material, g-kindian type water closet of size 580 mm of specified make with footrests, g-kvitrified tiles 600x600 mm, g-kadd wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint, g-kadd white cement for pointing at 2% on material, g-kadd providing and removing scaffolding at 3% on labour, g-kadd brush, putty, sand paper at 3% on cost of paint, g-kadd brush, putty, sand paper at 2% on cost of paint, g-kadd brush, putty, glue at 5% on cost of paint, g-kadd brush, putty at 5% on cost of distemper primer, g-klime, g-kpainter class i, g-kwhite cement, g-kadd, g-kwelder grade i, g-kfitter class i, g-kz section, g-kwhitening, g-kready mix primer paint (ready mix red lead paint), g-kceramic tiles 30 x 30 cms, g-kglazed tiles 300x450, g-kborder tiles 30 x 10 cms, g-kwater proofing cement paint, g-kenamel paint, g-kdistemper primer, g-kdry distemper, g-kpvc pipe of 10kg cum 110 mm, g-kpvc pipe of 6kgcum63 mm, g-kpvc pipe of 4kgcum75 mm, g-klabour charges for handing errection of rcc rings etc 5, g-ktransportation charges of materials beyond 5 km 10, g-kfabrication charges., g-kcost of 6.5mm m.s. coil, g-kwhite vitreous china clay flat back wash basin size 550x400mm, g-kcopper plated brass piller tap 15mm, g-kbib cock 20mm nominal bore, g-k 100mm s or p trap, g-klicenced plumber with tools, g-kadd white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material, g-kadd cement sand and grit 1% on material, g-kadd 5% for fittings and wastage charges, g-kc.i. / m.s. brackets for flushing cistern, g-klead or pvc connection pipe 32mm dia (for wash basin), g-k hinges 5 heavy duty, g-kcp brass waste 32 mm of standard pattern, g-kcp brass chain with plug, g-kbrass stop cock, g-kpolythylene pipes high density 32mm external dia, g-khandling loading and unloading 3% on material, g-klabour charges for lifting and placing in position and making connection at 7% on material, g-kpolyenthylene water storage tank of specified capacity l
Tender For corrigendum : supply of materialsforthe construction of sanjeevini shed in kudarimothi village under mgnregs scheme - g-kadd watering charges at 1 % on material, g-kadd sundries charges at 1 % on material, g-kmixer (concrete) - 1 cum capacity, g-kmixer (concrete small used in culvert), g-khom of vibrator 0.71 days, g-ksize stone 20 x 20 x 25 cms, g-kjungle wood runners and planks, g-kbroken stone aggregate 40 mm size, g-kbroken stone aggregate 20 mm size, g-kbroken stone aggregate 12 mm to 10 mm size, g-kboulders, g-kbond stone 20 x 20 x 45 cm, g-kplasticizer / super plasticizer, g-kform work for foundation upto plinth, g-kcoarse sand (zone iii), g-kportland cement, g-kover head & other miscellaneous charges, g-kadd watering charges at 1 % on labour, g-kadd sundries charges at 2 % on material, g-kadd handling , loading and unloading at 1% on material, g-kadd cutting and other wastage 5%, g-kmason class i (with tools), g-kunit cost as per the specification, g-khom of machinaries for planing, g-kms clamps, g-ktw beading for fixing glass, g-ktmt bars fe 500, g-kt section, g-kstays, g-ksilver oak or equivalent planks 38 mm thick, g-kreeded glass 2 mm thick, g-kmullion section, g-kmathi/nandi wood planks for panels 25 mm thick, g-khonnewood planks for panels 20 mm thick, g-khonne wood, g-khandles, g-kcasurina poles 75 - 100 mm dia, g-kcasurina poles 100 - 150 mm, g-kburnt bricks class 35 (non modular), g-kbinding wire, g-kadd sundries charges at 1 % on labour, g-kadd handling , loading and unloading at 2% on material, g-kindian type water closet of size 580 mm of specified make with footrests, g-kvitrified tiles 600x600 mm, g-kadd wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint, g-kadd white cement for pointing at 2% on material, g-kadd providing and removing scaffolding at 3% on labour, g-kadd brush, putty, sand paper at 3% on cost of paint, g-kadd brush, putty, sand paper at 2% on cost of paint, g-kadd brush, putty, glue at 5% on cost of paint, g-kadd brush, putty at 5% on cost of distemper primer, g-klime, g-kpainter class i, g-kwhite cement, g-kadd, g-kwelder grade i, g-kfitter class i, g-kz section, g-kwhitening, g-kready mix primer paint (ready mix red lead paint), g-kceramic tiles 30 x 30 cms, g-kglazed tiles 300x450, g-kborder tiles 30 x 10 cms, g-kwater proofing cement paint, g-kenamel paint, g-kdistemper primer, g-kdry distemper, g-kpvc pipe of 10kg cum 110 mm, g-kpvc pipe of 6kgcum63 mm, g-kpvc pipe of 4kgcum75 mm, g-klabour charges for handing errection of rcc rings etc 5, g-ktransportation charges of materials beyond 5 km 10, g-kfabrication charges., g-kcost of 6.5mm m.s. coil, g-kwhite vitreous china clay flat back wash basin size 550x400mm, g-kcopper plated brass piller tap 15mm, g-kbib cock 20mm nominal bore, g-k 100mm s or p trap, g-klicenced plumber with tools, g-kadd white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material, g-kadd cement sand and grit 1% on material, g-kadd 5% for fittings and wastage charges, g-kc.i. / m.s. brackets for flushing cistern, g-klead or pvc connection pipe 32mm dia (for wash basin), g-k hinges 5 heavy duty, g-kcp brass waste 32 mm of standard pattern, g-kcp brass chain with plug, g-kbrass stop cock, g-kpolythylene pipes high density 32mm external dia, g-khandling loading and unloading 3% on material, g-klabour charges for lifting and placing in position and making connection at 7% on material, g-kpolyenthylene water storage tank of specified capacity l
Tender For repair and overhauling service - short refit of in asset com 0995 sdp sr o l 25 a; any other suitable brand; no; buyer premises, service provider premises-dock bed preparation including marking, block placement, rigging up of centrelines and preparation of wooden keel/shape blocks as per docking plan. (a) the firm is to provide manpower for rope handling for docking/ undocking of slave dock pontoon as per docking schedule. (b) normally, one docking is envisaged. secord docking is catered to address exigencies, if any arises or to cater for operational requirements (c) cost of additional docking/ undocking operations of the pontoon, emerging due to delay in refit attributable to the contractor, is to be borne by the contractor. (d) fire sentry with portable fire-fighting appliances as well as physical security of contractor items/ material during dry-docking/ refit period are to be catered by the contractor. item no 1 2.00 nos 1.0002 002 cleaning of underwater hull post docking, external hull surface of the pontoon to be cleaned by high pressure fresh water jet washing (3000 psi) immediately after docking. item no 2 1950.00 sq.m 1.0003 003 provision of scaffolding, positioning and staging for undertaking survey, renewal/ repairs, surface preparation and painting of sdp. nb: (a) the principles dimensions of the pontoon are as follows:- size of slave dock pontoon 86m(l) x 16m(b) x 2.8m(h) (b) scaffolding material will be provided by nd(v) item no 3 1500.00 cum 1.0004 004 (a) undertake visual survey of all structural members including complete external hull surface, weather deck, access ladders and all internal tanks, manhole covers and deck fittings. item no 4 15000.00 sq.m 1.0005 004 (b) usg survey is to be undertaken for the suspected areas as per recommendations of class society (to be paid on actual). item no 5 5000.00 sq.m 1.0006 004 (c) hull survey and action taken reports is to be approved by any one of the in approved classification society (abs/bv/dnv/irs/classnk/lr/rina). nb:- (a) surveys are to be undertaken through qualified inspection services provided firm, recognised by any one of the in approved classification society, as indicated above. (b) renewal of corroded/ damaged areas to be recommended through survey i.a.w class standards or no 01/15. ndt, post repairs, to be undertaken as per class society norms. (c) tanks repaired by build-up/renewals are to be air pressure tested. (d) usg gauge and all associated equipment for survey to be provided by firm. robotic survey methods may be used by the contractor to save labour and time. (e) all deck fittings to be surveyed, repaired and load tested where considered necessary as per class standards. (f) all manholes to be inspected and repaired to ensure water tightness item no 6 1.00 set 1.0007 005 metal built ups to be carried at indicated location i.a.w class standards or no 01/15 requirements. nb: (a) build up followed by fairing by grinding to be undertaken. (b) to be undertaken as per survey report (to be paid as per actual work done) i.a.w class standards or no 01/15. item no 7 100.00 sq.m 1.0008 006 scantlings/ hull structural renewal of corroded/ damaged areas as per survey. nb: (a) renewal to be undertaken as per class standards or no 01/15. (b) to be undertaken as per survey report (to be paid as per actual work done) (c) ndt/ dpt is to be undertaken for renewal areas. (d) material is to be catered by the vendor item no 8 10.00 tonnes 1.0009 007 air pressure testing (apt) to be undertaken for all tanks/ chambers as per class standards to prove wt integrity post repairs as indicated at note- 4(b) above (to be paid on actuals). nb: (a) all equipment/ set up (including temporary fixures and their removal after test) are required to be catered by contractor. (b) pressure test:- (i) a test pressure of 150 mm water gauge is to be applied and pressure source isolated. the pressure drop if any, should then be monitored. (ii) any drop in water gauge reading should not ex
Tender For supply of scaffolding material-00010 m6200007065 workshop_common on basis of ntpc drg/specs part name : cuplock ledger additional information dimension : duty class: medium,size:2500 mm 40 mm center to center of two vertical, actual size:2450 mm, outer diameter:48.3 mm,steel tube manufactured as per is:1161 standards, 00020 specification part name workshop_common,on basis of ntpc drg/specs m6200007072 : cuplock : duty class:heavy,size:3000 mm :40 mm additional information dimension type:vertical or standard, outer diameter:48.3 mm. steel tube manufactured as per is:1161 standards 00030 m6200007101 workshop_common on basis of ntpc drg/specs part name additional information dimension : swivel coupler electroplated : 40 x 40 mm, 00040 m6200007111 for tube,forged workshop_common,on basis of ntpc drg/specs part name material dimension : scaffold board : steel : 3000 x 250 x 75 mm 16g sheet,press bent with anti-skid dimples, without hook,box type stiffeners 500mm, 00050 m6200007073 workshop_common,on basis of ntpc drg/specs part name : diagonal bracing tube additional information : duty class: medium,plain end length:6 m dimension :40 mm tube painted outer diameter:48.3 mm,plain end length tolerance:+/- 50 mm, steel tube manufactured as per is:1161 standards, 00060 m6200007085 workshop_common,on basis of ntpc drg/specs part name : spigot additional information : size:8 x 75 mm dimension : length:300 mm with nut and bolt (round),include one number nut and bolt 00070 m6200007038 workshop common on basis of ntpc drg/specs part name :adjusting base plate additional information :adjusting length:525 mm dimension : dia 36 x wd 450 mm, - for barauni pr 100242525.-quantity - 4449-msme exemption - no | startup exemption - no
Tender For corrigendum : nrlm shed masabahanchinal - ml 100mm s or p trap-1, pvc pipe of 10kg cum 110 mm-1, pvc pipe of 6kg cum,63 mm, pvc pipe of 4kg cum,75 mm, labour charges for handing errection of rcc rings etc., transportation charges of materials beyond 5 km 10, solid concrete block (40 15 20 cms)- 5.00 n/sqmm, g-sadd watering charges at 1 % on material, g-smixer (concrete) - 1 cum capacity, g-shom of vibrator 0.71 days, g-sbroken stone aggregate 40 mm size, g-sbroken stone aggregate 20 mm size, g-sbroken stone aggregate 12 mm to 10 mm size, g-splasticizer / super plasticizer, g-sformwork, centering & scaffolding for columns & piers, g-scoarse sand (zone iii), g-sportland cement, g-sadd watering charges at 1 % on labour, g-sadd handling , loading and unloading at 1% on material, g-sadd cutting and other wastage 5%, g-smason class i (with tools), g-sunit cost as per the specification, g-smixer (concrete small used in culvert), g-shom of machinaries for planing, g-stmt bars fe 500, g-st section, g-ssize stone 20 x 20 x 25 cms, g-ssilver oak or equivalent planks 38 mm thick, g-smullion section, g-smathi/nandi wood planks for panels 25 mm thick, g-sjungle wood runners and planks, g-shonnewood planks for panels 20 mm thick, g-shonne wood, g-scasurina poles 75 - 100 mm dia, g-scasurina poles 100 - 150 mm, g-sburnt bricks class 35 (non modular), g-sboulders, g-sbond stone 20 x 20 x 45 cm, g-sbinding wire, g-sadd handling , loading and unloading at 2% on material, g-sadd wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint, g-sadd providing and removing scaffolding at 3% on labour, g-sadd brush, putty, sand paper at 3% on cost of paint, g-sadd brush, putty, sand paper at 2% on cost of paint, g-sadd brush, putty, glue at 5% on cost of paint, g-sadd brush, putty at 5% on cost of distemper primer, g-smason class ii (with tools), g-slime, g-spainter class i, g-sadd, g-swelder grade i, g-sms clamps, g-sfitter class i, g-sz section, g-swhitening, g-stw beading for fixing glass, g-sstays, g-sreeded glass 2 mm thick, g-sready mix primer paint (ready mix red lead paint), g-shinges 5 heavy duty, g-shandles, g-swater proofing cement paint, g-senamel paint, g-sdistemper primer, g-sdry distemper, g-sfabrication charges., g-scost of 6.5mm m.s. coil, g-sindian type water closet of size 580 mm of specified make with footrests, g-swhite vitreous china clay flat back wash basin size 550x400mm, g-svitrified tiles 600x600 mm, g-scopper plated brass piller tap 15mm, g-sbib cock 20mm nominal bore, g-slicenced plumber with tools, g-sadd white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material, g-sadd white cement for pointing at 2% on material, g-sadd cement sand and grit 1% on material, g-sadd 5% for fittings and wastage charges, g-swhite cement, g-sc.i. / m.s. brackets for flushing cistern, g-slead or pvc connection pipe 32mm dia (for wash basin), g-sceramic tiles 30 x 30 cms, g-scp brass waste 32 mm of standard pattern, g-scp brass chain with plug, g-sbrass stop cock, g-spolythylene pipes high density 32mm external dia, g-sglazed tiles 300x450, g-shandling loading and unloading 3% on material, g-slabour charges for lifting and placing in position and making connection at 7% on material, g-spolyenthylene water storage tank of specified capacity l, g-sborder tiles 30 x 10 cms
Tender For corrigendum : mhl anganawadi - stone aggregate below 40 mm nominal size-mgr, stone aggregate(single size) 10 mm nominal size-mgr, stone aggregate(single size)20 mm nominal size-mgr, add white cement for pointing at 2% on material-mgr, border tiles 30 x 10 cms-mgr, glazed tiles 300x450-mgr, add white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material-mgr, licenced plumber with tools-mgr, lead or pvc connection pipe 32mm dia (for wash basin)-mgr, c.i. / m.s. brackets for flushing cistern-mgr, brass stop cock-mgr, cp brass waste 32 mm of standard pattern-mgr, cp brass chain with plug-mgr, copper plated brass piller tap 15mm-mgr, white vitreous china clay flat back wash basin size 550x400mm-mgr, unit cost as per the specification-mgr, handling loading and unloading 3% on material-mgr, labour charges for lifting and placing in position and making connection at 7% on material-mgr, polyenthylene water storage tank of specified capacity l-mgr, add brush, putty, sand paper, roller at 5% on cost of paint-mgr, enamel paint-mgr, painter class i-mgr, add brush, putty, glue at 5% on cost of paint-mgr, whitening-mgr, dry distemper-mgr, white cement-mgr, ceramic tiles 15 x 15 cms-mgr, teak wood beading 20 x 20 mm-mgr, add 15% wastage-mgr, reeded glass 3 mm thick-mgr, add 5% wastage charges-mgr, mathi/nandi wood scantling for styles ad rails 25 mm thick-mgr, mathi/nandi wood scantling for styles and rails 30 mm thick-mgr, honnewood planks for panels 20 mm thick-mgr, honne wood-mgr, hom of machinaries for planing-mgr, add cutting and other wastage 5%-mgr, mathi/nandi wood planks for panels 25 mm thick-mgr, vitrified tiles 600x600 mm-mgr, add providing and removing scaffolding at 3% on labour-mgr, add handling , loading and unloading at 1% on material-mgr, burnt bricks class 35 (non modular)-mgr, jungle wood runners and planks-mgr, add watering charges at 1 % on labour-mgr, add sundries charges at 1 % on labour-mgr, stone chistler class ii-mgr, mason class ii (with tools)-mgr, mason class i (with tools)-mgr, boulders-mgr, size stone 20 x 20 x 25 cms-mgr, mixer (concrete small used in culvert)-mgr, bond stone 20 x 20 x 45 cm-mgr, rubble stones-mgr, hom of vibrator 0.71 days-mgr, plasticizer / super plasticizer-mgr, binding wire-mgr, tmt bars fe 500-mgr, add sundries charges at 2 % on material-mgr, add handling , loading and unloading at 2% on material-mgr, casurina poles 100 - 150 mm-mgr, silver oak or equivalent planks 38 mm thick-mgr, mixer (concrete) - 1 cum capacity-mgr, portland cement-mgr, broken stone aggregate 12 mm to 10 mm size-mgr, broken stone aggregate 20 mm size-mgr, broken stone aggregate 40 mm size-mgr, transportation/loading and unloading of material/lifting of material/centering charges wherever necessary /over head/wastage/unforeseen charges/miscellaneous which are necessary during execution.-mgr, add watering charges at 1 % on material-mgr, add sundries charges at 1 % on material-mgr, coarse sand (zone iii)-mgr, granite/trap broken metal 100 mm and down size-mgr