Get complete information related to latest Metallic Plate Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Metallic Plate Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Metallic Plate Tenders.
Tender For corrigendum : supply of sitc of pabx system osb x5 uc , sitc of open scape desk phone , sitc of open scape desk phone cp210 , sitc of 30 pair tele tag block , sitc of submain wiring , sitc of pvc conduit , sitc gi box with modular plate for plug socket , sitc of gi box with modular plate , sitc of earthing set , sitc of gi strip , sltc of ferruling of 20 pair cable , sltc of utp 4 pair cat 6 lan cable , sitc copper conductor , sitc of telephone socket , sitc of rj 45 lan connector , sitc of 24 port poe switch with , sitc of patch cords , sitc of patch cords, 3 mtr , sitc of cat 6 complete io , sitc of 1 port face plate , sitc of 12 port jack panel , sitc of armoured ofc , sitc of fully loaded liu , sitc of fiber pigtail , sitc of single mode cord , sitc of mulimode cord , sitc of 36 u rack , sitc of pvc duct , sitc of marked duct , sitc of high grade pvc cable tray , sitc of server pc ddr4 sdram
Tender For open gym material with installation-, supply & fixing equipment for open gym as per following details. item should be fix properly including e/w & c.c. in m-20 as per requirement., , sit up & pull board double: product dimensions: 1760mm (length) x 1140mm (width) x 660mm (height)., , safe workout area: -2500mm (length) x 1600mm (width)., , the sit up board double made from "c" class gl pipe. center column made from 100mm nb "c" class g.i. pipe., , the main frame is of 25mm nb made from "c" class gl pipe. frp sheet of 3mm thickness is molded on main frame., , the remaining frame of the sit up board is of 32mm nb made from "c" class gi pipe., , the powder coating is done with pure polyester powder paints with 60 to 70 micron thickness., , the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb "c"class welded with m.s. round plate of 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness., , supply & fixing equiopment for open gym as per following details. item should be fix properly including e/w & cc. in m-20 as per requirement., , *legg press dimensions:-1840mm (length) x 360mm (width) x 1560mm. (height)., , *safe area-2.8 x 1.4mtr., , *leg press equipment made from "c" class g.l. pipe of different nb. nb stands for norminal bore sizes le., , *internal diameter of pipe in millimeters, , *the center pipe is of 100mm nb made from "c" class g1. pipe., , *the sleeve frame is of 100 dd and of m.s. seamless pipe with thickness 5mm. this sleeve can be disassembled from main frame., , *the bottom support of m.s. round plate of 250 mm & 10mm thick., , the remaining outer frame is of 32nb made from "c" class g.1. pipe., , 2, , the foundation used for fixing is structure and made from center pipe of g.i. of 80mm. nb "c" class welded with m.s., , round plate of 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.5. angle of 3 mm thickness and 20mm x 40mm crc. square pipe of 3mm thickness., , *seat & back rest provided are made up of ms deep draw quantity of 2mm thickness with no joint with uniform outer edge radius 20mm., , *the footrests are made from casted aluminum material, having sizes 130mm x 310mm x 5mm thick. with the support, , of 310mm x 130mm x 3mm thick ms plate., , the frame of footrests made up of 25 nb "c" class g.i. pipe. *, , closing caps are made up of high quality fiber reinforced plastic material. *, , *to build structure bushes are used which are made from m.s. seamless pipe of 50mm c.d. and 5mm thickness., , *the pins used are made up of 25 mm sae 8620 bright material., , *the bearings used are of "6205zz" permanent lubricated sealed bearing of reputed brand., , *high tensile steel with galvanized nut bolts are used for assembly., , *the cerclips used for assembly are of a24 mm, , 3, , providing and fixing of cross trainer of size not less than 1320mm (length) x 600mm (width) 1750mm (height), to enhance the mobility of upper and lower limbs and improve the flexibility of joints. the main structure frame shall be made from g.l. pipe minimum of 80nb "c" class welded with m.s. round base plate atleast 250 mm & 10mm thick. the handle frame shall be made up of atleast 25nb "c" class g.i. pipe. the footrests shall be made from aluminum casting material of size not less than 130mm x 310mm x 5mm thickness and mounted on ms. plate of size 130mm x310rnm x 3mm thick. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powders paints with 60 to70 micron thickness, complete in all respect includig fixing the m. s holdfast in cement concrete to hold the whole structure., , 1, , 4, , providing and fixing of chest press of size not less than 2000mm (length) 710mm (width) x 2200mm. (height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pul
Tender For interior / furniture work at dcf, social forestry office, anand - wooden flooring supply & laying of 8 mm to 8.33mm thick laminated wooden flooring, classification of use 31/23 with a surface abrasion resistance of class ac4. 0.2 mm thick wear layer on top of a high density fiber substrate. plank size 1215 mm x195 to 197mm having locking arrangment with an under laying made of natural colour foam, with accessories like end profile, transition profile, reducer, stair nosing, the item including suplying and fixing of skirting profile & door profile to the flooring. etc, complete as per manufacturers specification, detailed technical specifications, drawings and as per the sr.plant/plant engineer, dcf cabin door -glass with full glass door on patch fitting : providing and fixing glass door with patch fitting door as shown in the drg. door shall consist of make 12mm thk. toughened clear float glass / or frosted glass. rate shall include necessary designer film, approved locking systems, ss handle pair, floor springs (heavy duty or equivalent), gaskets & miscellaneous hardware items. including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge and consultant. drawings and as per the sr.plant/plant engineer, pvc flooring providing & fixing 1.5 mm thk pvc vinyl planks flooring (204mm x 1239mm) looks best when laid on a beautifully smooth sub-floor, which is easily achieved with the right preparation work total thickness 2.5mm, wear layer 0.7mm,total weight 2.6kg/m sq.flooring prepared european classification 34/42(suitable for very heavy commercial and light industrial use).instaulation & design giving by architect.european classification 34/42(suitable for very heavy commercial and light industrial use), account branch a - partation half wooden partition providing and fixing low height partition with installation as per drawing and 50mmx37mm teakwood framing the skeleton (plywood+glass frame structure) with 18mm x 18mm thick (plywood, conforming is 303 bwr grade) vertical and horizontal plywood (patti) both side cover & top of low height partition 12 mm thk. teak wood arched / border patta with 6mm groove as per design. fixing properly without any air gap and finishing with selected 1mm laminate, before installation, make hole/face plate for conduit pipes of electrical / networking cables with openable stud from partition including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge., account branch b - new full height storage stroage rack full height storage providing and fixing full height storage up to lintel level, 50mm x 37mm teakwood framing with thick (plywood, conforming is 303 bwr grade) top and shutter 18mm made from post forming in approved shade with vertical and horizontal surface 18mm plywood with inside 0.8mm and outside 1mm laminate finish. all teakwood bidding should be finished by melamine polish with support of s.s. legs, lock, handle, etc. complete as per the architect dwgs, including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge., acf cabin a - table & side unit top modification repairing & fixing main table replacement of table top by 6 mm new coariean (dupont or samsung) sheet with proper edge bending and restrengthening of entire table, replacement of drawer channels, locks,handels, keyboard trays etc.including all materials and labour etc. complete as per detail drawing and instruction of engineer-in charge., curtains a - zibra zibra blind/wooden blind providing and fixing zibra blind curtain of aerolux,vista,neon,mac make or equivalant fixed on window level on wooden batten and curtain lift with cotton thin rope, design and colour as per instruction by engineer in charge with necessary hardware fitting, material and labour etc complete.approoved by engineer incharge and consultant., curtains b - roller a curtain rollar blind provi