Latest meteorological service Tenders | Government meteorological service Tenders

State Government

CTN :44924828

27 Apr, 2026 1.99 Lacs

Rampur-Up - Uttar Pradesh

Tender For providing of testing service for on-board /commissioned equipment/ instrument related to plant - partial discharge and centrifuging of transformer oil; partial discharge test of 160mva tf and its centrifuging of tf oil; any govt org

CTN :44924670

18 May, 2026 NA

Chandigarh - Chandigarh

Tender For providing of repair and overhauling service - scanners; hydrostatic test of engine fire bottle with spares; yes; buyer premises,repair and overhauling service - scanners; hydrostatic test of apu fire bottle with spares; yes; buyer premises

CTN :44925081

28 Apr, 2026 2.24 Lacs

Bidar - Karnataka

Tender For providing of repair and overhauling service - trolley cabin pressure test (415 volts); trolley cabin pressure test (415 volts); yes; buyer premises

CTN :44897162

22 Apr, 2026 NA

Chandigarh - Chandigarh

Tender For providing of repair and overhauling service - repair and overhauling of test rig for fuel control unit kta-5dm; repair and overhauling of test rig for fuel control unit kta-5dm; yes; buyer premises

CTN :44653041

23 Apr, 2026 NA

Kolkata - West Bengal

Tender For corrigendum : supply of combined motion sensor inertial measurement unit hrp gyro dgps for grse ars project : : - mru_combined motion sensor imu,hrp and gyro , dgps navigation sensor , software including lifetime licence , converter module , installation material and accessories , system cables , special tools and test equipment , document hardcopy , document softcopy , service of engineer , training

CTN :44915691

07 May, 2026 NA

Kolkata - West Bengal

Tender For supply of 09 cfm portable hp dd compressor300 bar_3037-3040 , auto drainage system_hp dd compressor_3037-3040 , charging panel c-w 4 outlet_compressor_3037-3040 , vibration mounting and ccessories_compressor_3037-3040 , isolating-stop valve for 8mm dia ss pipe_3037-3040 , onboard spares for hp dd compressor_3037-3040 , tool kit for hp dd compressor_3037-3040 , comm spares inc micronic filter cartridg_3037-3040 , instruction manual, cpl- pil_compressor_3037-3040 , instructmanual,cpl-pil in cd_compressor_3037-3040 , shop test report_hp dd compressor_3037-3040 , inspection report_hp dd compressor_3037-3040 , calibration certificate_hp dd compressor_3037-3040 , air purity certificate_hp dd compressor_3037-3040 , fault location chart_hp dd compressor_3037-3040 , test-trial format_hp dd compressor_3037-3040 , pressure test certificates_hp dd compres_3037-3040 , preservation and maint schedule_compressor_3037-3040 , mtc from nabl test labs_compressor_3037-3040 , guarantee certificate_compressor_3037-3040 , equipment service log book_compressor_3037-3040

Central Government/Public Sector

CTN :44915632

07 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of 2003655 , 2003690 , 2003708 , 2003717 , 2003733 , 2003734 , 2003735 , 2003736 , 2003737 , 2003738 , 2003739 , 2003740 , 2112483 , 2112484 , 2114138 , 2114139 , 2114146 , 2114152 , 2114162 roll2003655 material : alloy cast steel hardness : 40-45 shore c drawing reference : 1-d22939, rev-c tensile strength : 85 to 100 kgf/mm stand no : billet mill 1 & 2 size : 850 x 1200 mm barrel hardness : 40-45 shc roll approximate unit weight : 7.35 tons uts : 85-100 kgf/sq.mm neck hardness :40-45 shc neck runout :0.04 mm roll coating : anti-corrosive ring hardness :600-700 hv3 test certificate required : yes ring drawing no : mec/1/22938/rev c ----------------------------------- special instructions: ----------------- ------------------ 1) ultrasonic,uts & %elongation tests shall be done and certified. 2) flat wobblers to be strictly concentric with roll neck journals. 3) rolls to be suitably packed and numbered for identity. 4) the microstructure should be free from continuous network of carbides along the grain boundaries. 5) t.c. to be given along with micro-structure photograph. a seperate copy to be sent to d.g.m(rs&rs) at the time of delivery. 6) the rolls shall be guaranteed against manufacturing defects such as blow holes, cavity, non-metallic inclusions, pipe segregation, cracks, hard spots, flakes etc which may adversely affect their service life. 7) should any roll fail prematurely or give sub-standard performance due to the above defects, the suppliers shall rectify the defects at their cost wherever possible to the entire satisfaction of vsp or make prorata compensation or make full replacement if the roll has been ) /bid number : gem/2026/b/7416074 * /dated: 16-04-2026 & & / bid document 1 / 40 rejected before use. 8) the rolls are also to be guaranteed for the roll life as mentioned or 5 years from the date of supply to vsp which ever is earlier.this guarantee clause superseeds, guarantee mentioned elsewhere in the po(a/t), in this regard. 9) hardness test of end ring shall be done and certified. 10) these rolls are used in roughing stands of hot rolling mill. roll set life: bh1=14.35, bh2=14.55 lakh tons, roll2003690 material : sg cast iron (accicular) hardness : 70-75 shore c drawing reference : 1/4012885, rev-e stand no : bar mill 19 & 21 size : 360 x 600 mm barrel hardness : 70- 75 shc roll approximate unit weight : 0.70 tons neck hardness :38-45 shc neck run out : 0.04 mm roll coating : anti-corrosive coating drop in hardness : 1 shc per 10mm on barrel depth ---------------------------------- -------------- special instructions: -------------------------------------- ---------- 1) flat wobblers to be strictly concentric with roll neck journals. 2) rolls to be suitably packed and numbered for identity. 3) t.c. to be given along with micro-structure photograph. a seperate copy to be sent to d.g.m(rs&rs) at the time of delivery. 4) the rolls shall be guaranteed against manufacturing defects such as blow holes, cavity, non-metallic inclusions, pipe segregation, cracks, hard spots, flakes etc which may adversely affect their service life. 5) should any roll fail prematurely or give sub-standard performance due to the above defects, the suppliers shall rectify the defects at their cost wherever possible to the entire satisfaction of vsp or make prorata compensation or make full replacement if the roll has been rejected before use. 6) the rolls are also to be guaranteed for the roll life as mentioned or 5 years from the date of supply to vsp which ever is earlier.this guarantee clause superseeds, guarantee mentioned elsewhere in the a/t, in this regard. 7) these rolls are used in hot rolling mill. roll set life1: 19re16&18=2.00,19re20=1.62 l.tons roll set life2: 21re25=2.34, 21re36=0.7 lakh tons roll set life3: 21re28&re32=0.90, 21re32, re36=0.70 lakh tons roll set life4: 21rore16,18=2.16, 21re20=2.13 lakh tons, roll2003708 material : sg cast iron (accicular) hardness : 70-75 shore

Central Government/Public Sector

CTN :44912000

23 Apr, 2026 NA

Pune - Maharashtra

Tender For b- check kit parts as follows of m/s. kirloskar oil engines ltd. ( koel ) make 500 kva dg setscpcb- iv+ , model no. dv8 eta 4g3 as per schedule for koel engine. 1) lube oil filter bypass spin on ( part no. dv0.014.67.0.00 ) :- 1 no. 2) lube oil filter full flow spin on kirloskar logo reversal ( part no. dv0.014.72.0.pr ) :- 1 no. 3) final filter cartridge fm 100 ( part no. dv8.072.108.0.00 ) :- 1 no. 4) pre fuel filter ( part no. 6h.508.04.0.pr ) :- 1 no. 5) centrifugal filter service kit for dv ( part no. dv0.999.40.0.00 ) :- 1 no. 6) urea filter ( part no. 5h.085.16.0.sp ) :- 2 nos. 7) suction connection piece ( part no. 5h.085.21.0.sp ) :- 2 nos. note : oem or authorized dealer only to offer with dealership certificate and test report during supply [ warranty period: 30 months after the date of delivery ]

CTN :44822423

23 Apr, 2026 1.00 Crore

Chatra - Jharkhand

Tender For corrigendum : providing of competitive test preparation service - jee (main/advanced), neet (ug); blended (live + recorded), recorded video lectures, live interactive classes; 12 months

CTN :44906890

06 May, 2026 NA

Bhubaneswar - Odisha

Tender For selection of service provider for online examination (computer based test) for te&scert, odisha

Meteorological Service Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector