Latest metering module Tenders | Government metering module Tenders

corporations/Associations/Others

CTN :39419072

03 Mar, 2025 11.08 Lacs

Vadodara - Gujarat

Tender For tender for supply of hrc fuse cylindrical type-4a rdso approved , hrc fuse cylindrical type-6a(rdso approved , hrc fuse cylindrical type-10a rdso approved , hrc fuse bs88 gg , offset blade type-10a rdso approved , glass fuses 315ma , glass fuses 630ma , glass fuses 2a , glass fuses 4a , glass fuses 6a , glass fuses 10a , glass fuses 16a , rj45 connector , rj45 connector shielded , cat6 cable , digital low current clamp meter to measure current leaks parasitic draw down to 1 ma and electric loads from 1ma to 100 amp ac/dc , voltages from 0 to 600v ac/dc , small jaw size to measure current in signalling circuit , 4 digit display. make -fluke , gtc/kew , scope or superior with better specification as mentioned with all accessories like test lead , batteries and carrying case , sample may be got approved from consignee before supply. , puf sealant 200ml , lan tester test the correct pin configuration of 10/100 base-t 10 base-2 thin ethernet cable to verify cable continuity , oprn , short and miss wire , lug crimping tool , tagari or ghamela gi , oil pump , chamois leather for cleaning purpose 1 piece of size 600mm x 500mm or 2 piece of size 300mm x 250mm conforming to is 1017 grade 2 , krone tool , silicon sealant 200ml , glass putty of is 419-1967 , wd 40 spray can , rj45 crimping tool , soldering iron soldron make electric wattage 25 watt , silicon sealant applicator gun , door mat 2 feet x 3 feet , digital vernier callipers ( measurement range 0-6 inch , 0-150mm resolution 0.01inch , 0.1mm accuracy plusminus 0.2mm , 0.1 inch) , supply of ara terminal blocks small m6 made of pbt as per specification no irs- s-75-2006 rev. 2 with latest amendment and rdso drg. no. sa-23741a -alt-4 , m22 x 275mm , bolt , nut , 2 washer , 1 spring washer and 1 lock nut , m8 , 2 nut , m30 , 1 nut , 1 check nut and 1 washer , m12 x 100mm , bolt , 4 washer , nut 3 set , csk m6 x 30mm- nut , bolt , spring washer 2 set , m20 , 2 nut , 1 check nut , 1 spring washer , 1 washer , m24 , 2 nut , 1 check nut , 1 spring washer , 1 washer , m22 , check nut , m24 , 1 nut , 1 check nut , 5 by 8 x 2 inch bolt hex , 3 by 8 x 2 inch bolt hex , 3 by 8 x 1.5 inch bolt hex , 3 by 8 x 1 inch bolt hex , 3 by 8 x 0.75 inch bolt hex , square head 3 by 4 x 4.0 inch - 2 washer , 1 spring washer , nut , check nut , locking pin , square head 3 by 4 x 5.5 inch- 2 washer , 1 spring washer , nut , check nut , square head 3 by 4 x 3.5 inch- 2 washer , 1 spring washer , nut , check nut , locking pin , m8 x 40 - 1 nut , 1 spring washer and 1 washer

CTN :39432496

15 Mar, 2025 NA

Hyderabad-T - Telangana

Tender For supply of digital multimeter (q3) , insulation resistance tester , clamp meter , remote display multimeter , ac slash dc current clamp dc to 20khz , ac slash dc current clamp dc to 100khz

CTN :38893382

24 Feb, 2025 62.0 Thousand

Delhi - Delhi

Tender For bid to ras providing of calibration services - electrical; voltage, current, power (ac/dc), frequency, power factor, phase angle, calibration of precision high voltage meter qty 02; nabl labs; lab

Central Government/Public Sector

CTN :39010847

25 Feb, 2025 18.13 Lacs

Nowrozabad - Madhya Pradesh

Tender For corrigendum : supply of fixed contact assembly 400a part no bd 4510 , arc control pot separator part no ek 6050876 , barrier part no ek 6050869 , insulated bolt big part no pd 420 , insulated bolt small part no pd 8296 , carriage assembly complete 400 630a part no bd 5550 , moving contact assembly part no bd 5551 , jaw contact assembly set part no bd 4050 , auxiliary plug and socket assembly complete set part no bd 4850 , guide pin big part no pd 4043 , guide pin small part no pd 3597 , lead screw assembly part no bd 4860 , operating mechanism complete set part no bd 4911 , rod holder assembly part no bd 4921 , shunt trip coil assembly part no 1650ts , isolating spout assembly with nylon shroud part no bc 9977 , elr core balance current transformer part no ea 6650 , power pack unit 110v dc part no bd 5999 , instrument chamber box complete with internal wiring including selector switches, indication lamps voltmeter, ampere meter, fuse base etc part no bdw 7771 , partition plate assembly part no bd 5255 , operating shutter assembly part no bd 5310 , gas van pipe part no bd 5589 , ocb tank partition part no bd 4711 , earthing bar contact part no bd 8810 , cable entry box part no bd 2290 , idmt relay complete set with 2 over current and 1 earth fault with instantaneous tripping high set part no ea 6561 , high speed tripping relay part no ea 6890 , assorted hardware part no bd 9295 , under and over voltage relay part no ea 6591 , heavy duty earth leakage relay with leakage display time lag facility and cbct part no ea 6641 , trolley complete with all accessories part no bd 8268 , rotary switch complete with link and fixing plate part no bd 9191 , complete wiring set part no bd 5988

CTN :39066876

22 Feb, 2025 1.70 Lacs

Baramulla - Jammu And Kashmir

Tender For bid to ras corrigendum : supply of generator set 3.5 kva.supply of generator set 3.5 kva alongwith standard tools as mentioned in appendix a of pdf , xlpe insulated pvc sheathed heavy duty armoured multi core cable , on and off load change over switches in sheet metal enclosure 16 amp rating , lub oil filter for 3.5 kva generator , fuel filter for 3.5 kva generator , air filter element for 3.5 kva generator , air cleaner hose for 3.5 kva generator , oil seal front and rear for 3.5 kva generator , adjustable spanner for opening of fuel filter fuel line etc for 3.5 kva generator , insulated cutting plier , multi meter to check current and voltage output. , screw driver and tester to check the power , 2.5 ltr quantity of oil and lubricants for first change or first

State Government

CTN :38996053

24 Feb, 2025 2.00 Lacs

Multi City - Maharashtra

Tender For corrigendum : supply of t&p material under dapoli-i subdivision of khed division - pp rope ", pp rope 1", hexa frame with steel blade, megger(5kv), tong tester 3.5 digit, the tong tester shall have the following parameters: a) ac current measurement: 0- 20/50/500/1000 amp b) ac/dc voltage measurement:- 0 to 300 v/600 v. c) resistance measurement: 400 ohms to 4 k ohms., accuracy: i) for ac current 3% reading with, resolution of 0.1 upto 100 a, 1.0 upto 500/ 1000 a. 2632_spec.doc 2 ii) for ac/dc voltage 1.5% reading with resolution of 0.1 upto 100 v, 1.0 upto 600 v. iii) for resistance 1% reading with resolution of 0.1 ohm upto 400 ohms, 0.1 ohm upto 4 k ohms., the meter should have 3-1/2 digits 2000 counts led display preferably with backlit., aluminium folding ladder (7/8 mtr), spanner set 8 - 24 nos double ended ring, adjustable spanner 12", adjustable spanner 6", collapsible ht earth rod for voltages upto 33 kv, taparia 2 in 1 screw driver 905 1, high beam torch led rechargable, come along clamp

State Government

CTN :38996087

24 Feb, 2025 2.00 Lacs

Multi City - Maharashtra

Tender For corrigendum : supply of t&p material inder lote subdivision of khed division - pp rope ", pp rope 1", hexa frame with steel blade, megger(5kv), tong tester 3.5 digit, the tong tester shall have the following parameters: a) ac current measurement: 0- 20/50/500/1000 amp b) ac/dc voltage measurement:- 0 to 300 v/600 v. c) resistance measurement: 400 ohms to 4 k ohms., accuracy: i) for ac current 3% reading with, resolution of 0.1 upto 100 a, 1.0 upto 500/ 1000 a. 2632_spec.doc 2 ii) for ac/dc voltage 1.5% reading with resolution of 0.1 upto 100 v, 1.0 upto 600 v. iii) for resistance 1% reading with resolution of 0.1 ohm upto 400 ohms, 0.1 ohm upto 4 k ohms., the meter should have 3-1/2 digits 2000 counts led display preferably with backlit., aluminium folding ladder (7/8 mtr), spanner set 8 - 24 nos double ended ring, adjustable spanner 12", adjustable spanner 6", collapsible ht earth rod for voltages upto 33 kv, taparia 2 in 1 screw driver 905 1, high beam torch led rechargable, come along clamp

State Government

CTN :38996088

24 Feb, 2025 2.00 Lacs

Multi City - Maharashtra

Tender For corrigendum : supply of t and p to khed subdivision - pp rope ", pp rope 1", hexa frame with steel blade, megger(5kv), tong tester 3.5 digit, the tong tester shall have the following parameters: a) ac current measurement: 0- 20/50/500/1000 amp b) ac/dc voltage measurement:- 0 to 300 v/600 v. c) resistance measurement: 400 ohms to 4 k ohms., accuracy: i) for ac current 3% reading with, resolution of 0.1 upto 100 a, 1.0 upto 500/ 1000 a. 2632_spec.doc 2 ii) for ac/dc voltage 1.5% reading with resolution of 0.1 upto 100 v, 1.0 upto 600 v. iii) for resistance 1% reading with resolution of 0.1 ohm upto 400 ohms, 0.1 ohm upto 4 k ohms., the meter should have 3-1/2 digits 2000 counts led display preferably with backlit., aluminium folding ladder (7/8 mtr), spanner set 8 - 24 nos double ended ring, adjustable spanner 12", adjustable spanner 6", collapsible ht earth rod for voltages upto 33 kv, taparia 2 in 1 screw driver 905 1, high beam torch led rechargable, come along clamp

State Government

CTN :38996089

24 Feb, 2025 2.00 Lacs

Multi City - Maharashtra

Tender For corrigendum : supply of t&p material under dapoli-ii subdivision of khed division - pp rope ", pp rope 1", hexa frame with steel blade, megger(5kv), tong tester 3.5 digit, the tong tester shall have the following parameters: a) ac current measurement: 0- 20/50/500/1000 amp b) ac/dc voltage measurement:- 0 to 300 v/600 v. c) resistance measurement: 400 ohms to 4 k ohms., accuracy: i) for ac current 3% reading with, resolution of 0.1 upto 100 a, 1.0 upto 500/ 1000 a. 2632_spec.doc 2 ii) for ac/dc voltage 1.5% reading with resolution of 0.1 upto 100 v, 1.0 upto 600 v. iii) for resistance 1% reading with resolution of 0.1 ohm upto 400 ohms, 0.1 ohm upto 4 k ohms., the meter should have 3-1/2 digits 2000 counts led display preferably with backlit., aluminium folding ladder (7/8 mtr), spanner set 8 - 24 nos double ended ring, adjustable spanner 12", adjustable spanner 6", collapsible ht earth rod for voltages upto 33 kv, taparia 2 in 1 screw driver 905 1, high beam torch led rechargable, come along clamp

State Government

CTN :38996090

24 Feb, 2025 2.00 Lacs

Multi City - Maharashtra

Tender For corrigendum : supply of t and p material under mandangad subdivision of khed division - pp rope ", pp rope 1", hexa frame with steel blade, megger(5kv), tong tester 3.5 digit, the tong tester shall have the following parameters: a) ac current measurement: 0- 20/50/500/1000 amp b) ac/dc voltage measurement:- 0 to 300 v/600 v. c) resistance measurement: 400 ohms to 4 k ohms., accuracy: i) for ac current 3% reading with, resolution of 0.1 upto 100 a, 1.0 upto 500/ 1000 a. 2632_spec.doc 2 ii) for ac/dc voltage 1.5% reading with resolution of 0.1 upto 100 v, 1.0 upto 600 v. iii) for resistance 1% reading with resolution of 0.1 ohm upto 400 ohms, 0.1 ohm upto 4 k ohms., the meter should have 3-1/2 digits 2000 counts led display preferably with backlit., aluminium folding ladder (7/8 mtr), spanner set 8 - 24 nos double ended ring, adjustable spanner 12", adjustable spanner 6", collapsible ht earth rod for voltages upto 33 kv, taparia 2 in 1 screw driver 905 1, high beam torch led rechargable, come along clamp

Metering Module Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

State Government

State Government

State Government

State Government

State Government