Latest micrometer gauge Tenders | Government micrometer gauge Tenders

Central Government/Public Sector

CTN :45209674

25 May, 2026 NA

Multi City - Multi State

Tender For manufacturing and supply of complete set of inspection gauges as per rdso drg. no. t-9002(part) for 6400 mm curved switch with 60e1 a1 thick web tongue rails for 1 in 8.5 turnout b.g (1673 mm) for 60e1 rail on psc sleeper to rdso drg. no. rt-6280 for use in depot. along with testing and calibration by any government approved lab or by any nabl accredited labs and confirming to specification, material: 3 mm thick tool steel plate of grade tc-3 (table-1) of is:1570 (part-6) or equivalent or higher hardness. the gauges are to be supplied in in a wooden case. one set consist of (i) gauge no. 1/a & 1/b - end templates at actual toe, (ii) gauge no. 2/a & 2/b- head width checking gauge at point 'h' (22 mm head thickness), (iii) gauge no. 2/1- head width checking gauge at point 'h' (22 mm head thickness), (iv) gauge no.3/a & 3/b - head width checking gauge at point 'h' (55 mm head thickness), (v) gauge no. 3/1- head width checking gauge at point 'h' (55 mm head thickness) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45209678

25 May, 2026 NA

Multi City - Multi State

Tender For manufacturing and supply of complete set of inspection gauges as per rdso drg. no. t-6213(part) for 6400 mm over riding fan shaped curved switch b.g for 60e1 rail on psc sleeper to rdso drg. no. rt-4966 for use in depot along with testing and calibration by any government approved lab or by any nabl accredited labs and confirming to specification, material: 3 mm thick tool steel plate of grade tc-3 (table-1) of is:1570 (part-6) or equivalent of higher hardness. the gauges are to be supplied in in a wooden case. one set consist of (i) gauge no. 1/a- end templates y at point 'r' (ats), (ii) gauge no. 1/b- end templates y at point 'r' (ats), (iii) gauge no. 2- under cutting of tongue rail foot, (iv) gauge no. 3- 13 mm head thickness (at 476.5 mm from ats), (v) gauge no. 6- 12r toe radius at ats, (vi) gauge no. 33- tongue rail head thickness (at 2348 mm from ats). [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45076846

28 May, 2026 NA

Katihar - Bihar

Tender For at katihar division - supply, installation and commission of track-based rail gauge face lubricators (electronic type) for 01km category along with supply of grease and maintenance for a period of 5 years for curves.

Central Government / Public Sector

CTN :45112577

28 May, 2026 3.33 Crore

Katni - Madhya Pradesh

Tender For supply, installation and commissioning of track based rail gauge face lubricator (electronic type) in connection with up katni grade separator project in katni district, madhya pradesh.

State Government

CTN :45272736

08 Jun, 2026 21.86 Lacs

Raichur - Karnataka

Tender For procurement of railway track materials - combination fish plates, h3 electrods, fish plate t-1898 (610 mm), fish plate t-5916 1m long, gr pad t-4614, bolt 25x260 t-11521, connecting rod m-3040, flags (green colour), flags (red colour), locking c-clamp for p & c, gauge level railway, motor operated trolly (bg), half head bolt 25x90 , full head bolt 25x90 , fish plates bolts 25x140 , bolt 25x190 t-11514, bolt 25x280 t-11523, bolt 25x290 t-11524, bolt 25x300 t-11525, bolt 25x310 t-11526, bolt 25x320 t-11527, bolt 25x330 t-11528, bolt 25x340 t-11529, bolt 25x350 t-11530, bolt 25x360 t-11531, bolt 25x370 t-11532, bolt 25x380 t-11533, bolt 25x390 t-11534, bolt 25x400 t-11535, bolt 25x410 t-11536, bolt 18x75 cut head, bolt 18x90 t-11637, bolt 18x80 t-11636, bolt 18x75 t-11635, bolt 18x65 t-11627, packing pieces t-026(m), spring washer t-10773, spherical washer t-023(m), m.s taper washer t-5847, distance block t-4988(1 in8.5), distance bl0ck t-4987(1 in8.5), check rail block t-2592, distance blck rt-4980(1 in8.5), distace block rt-4979(1 in8.5), heel block rt-4978 (1 in 8.5), stretcher bar bracket, stretcher bar second(1 in8.5), stretcher bar first(1 in 8.5), stretcher bar leading(1 in8.5), m.s plate rt-3901, bearing plate t-6074 ds, bearing plate t-6073 ds, bearing plate t-6072 ds, bearing plate t-6071 ds, bearing plate t-6070 ds, bearing plate t-6069 ds, bearing plate t-4976(1 in 8.5), bearing plate t-4975(1 in 8.5), bearing plate t-4974(1 in 8.5), bearing plate t-4973(1 in 8.5), bearing plate t-4972(1 in 8.5), bearing plate t-4971(1 in 8.5), slide chair t-4596 (1 in 12), slide chair t-4968, m.s stop t-10456, gauge tie plate t-5360, cms crossing t-4967 (1 in 8.5), check rail, tounge rail-rhs t-4865, tounge rail-lhs t-4865

Central Government And Public Sector

CTN :45262846

19 Jun, 2026 NA

Nagpur - Maharashtra

Tender For supply, installation, commissioning and operating (for 5 years) track based gauge face rail lubricators - 1 km (electronic type) in secr, nagpur division.

CTN :45091460

28 May, 2026 NA

Multi City - Multi State

Tender For manufacturing and supply of psc 1 in 12 (t/o) sleeper (pretension type) for broad gauge (1673 mm) as per rdso design to drawing no. rdso (t-4218)(latest alt.) for general layout to suit 60 kg rail and part drawing thereof and irs spn. sl. no. t- 45 (4th revision march-2021) with latest amendments duly loaded into wagon/ road vehicle. [ warranty period: 60 months after the date of delivery ]

Central Government And Public Sector

CTN :44687431

25 May, 2026 NA

Raebareli - Uttar Pradesh

Tender For bid to ras corrigendum : tender for supply of calibration of aviation standard tools and equipments : : - battery charger alpha c20/25 , battery charger alpha c20/25 , battery discharger bc 5000 , battery discharger bc 5000 , multimeter fluke 179 , torque wrench 5-35 nm , dc power supply l-3230 , ramp tester ifr-6000 , torque screw driver a402 (0.5- 2.5 nm) , carbon monooxide meter s/n- 211222325 , combination set , combination set 0-360 degree , compass landing (sirs/189/188) , d t i digital gauge 0-10 mm , d t i gauge 0-10 mm , depth gauge 0-150 mm , digital multimeter metravi 19 , digital protactor 0-90 degree , feeler gauge , feeler gauge 0.03-1 mm , force gauge 0-200 lbf , force gauge digital , hi voltage cable tester , hole gauge , micrometer digital 0-25 mm , micrometer external 0-150 mm , micrometer inside 0-1mm , micrometer inside 0-25 mm , pressure gauge 200 psi , pressure gauge , pressure gauge , pressure gauge 0-1000 psi , pressure gauge 0-150 psi , pressure gauge 0-150 psi , pressure gauge 0-250 psi , pressure gauge 0-500 psi , pressure gauge 0-6000 psi , pressure gauge 0-6000 psi , pressure gaugte 0 - 1000 psi- n2 kit , spirit level ts/94/2 (300 mm) , spring balance 0-50 kg , stop watch analog , straight edge , surface plate 18 inchx18 inch , telescopic gauge 12 to 54 mm , torqe screw driver 2-8 nm , torqe screw driver new capri , torque wrench , torque wrench , torque wrench 20-100 lb-ft , torque wrench 2-14 nm , torque wrench 5.6 23.7 nm , torque wrench 5-35 nm , torque wrench 5-35 nm , type pressure gauge digitel 150 psi , tyre pressure gauge 0-12 kg , tyre pressure gauge 0-200psi , pressure gauge 0-250 psi , pressure gauge 17.5 kg (spark plug tester) , volt meter , digital thermohygrometer , digital weighing balance , digital thermohygrometer , air compressor capacity 50 liter , air compressor capacity 50 liter , air compressor capacity 30 liter , air compressor capacity 30 liter , lifting beam (engine sling) , mobile crane with 10 mm wire rope , chain pully with mono rail , chain pully with mono rail , chain pully with mono rail , chain sling 4 leg 8 mm link dia , mobile crane with 12 mm link chain

CTN :44042113

25 May, 2026 NA

Ernakulam - Kerala

Tender For bid to ras tender for supply of hose-hydraulic , spacer , screw , screw , screw , nut , nut , washer , washer , washer , thrust washer , washer , stud , stud , element-fuel filt , o-ring , clamp , o-ring , driver tool , oil seal , installation tool , sleeve , seal , harness assy , harness , actuator , thermostat , valve-cdr , high performance gear lube , bearing assembly , cable kit , lever-steering , bellows assy , universal joint , repair kit , filter , fuel , sensor , sensor , mount - engine , gasket , pump assembly - injection , anode assy , air cooler , screw , gasket , anode kit , washer , liner-cylinder , air cleaner , filter element , hose , washer , starter 12v , pipe , sensor , belt , key switch kit , voltage gauge-black , fuel gauge , console mount remote control , cable t/s g2 20ft , thermostat valve , switch kit , start/stop - single , o-ring , seal , harness assy , nut , cylinder head , corrosion guard , mercury diesel engine oil , extended life coolant , ring , retaining , ring , retaining , shaft upper , manifold assy , seal , o ring 2 , battery lugs , switch for navigation light , o ring 5 , fuel filter 2 , seal-swivel tube , o ring 2 , o-ring , hose , thermostat , assy-lower mount , ring-retaining , seal kit , fsm , ngk zfr5f 4 , gasket , hose fsm to rail , cable t/s g2 12ft , spark plug wires , gearcase seal kit , o-ring kit , trim , gasket cyl head , ring set , piston , screen fuel fltr , thermostat assy , gasket exh man , bearing-con rod , repair kit-w/p , repair kit - imp , seal-top m brng , pin-cotter , screw , plug shift shaft oil seal , plug kit- drain , connector , nyliner , bushing , bushing , spacer , o ring , o ring , o-ring , o ring , oring , o ring , o-ring , seal , oil seal , seal , gasket , gasket , bearing needle , hose 54 inch , tube exhaust , hose exhaust , hose-hydraulic , hose- breather , hose , hose-trim cylinder(starboard) , hose-trim cylinder(port) , hose-hydraulic-trim cylinder to connector , diesel filters , bell housing assy , seal , seal , hsg assy-gimbal , impeller , ring-retaining , ring-retaining , clamp , belt , bearing ball , str rotary kt 12 , steering cable , battery lugs , bilge pump 500 , std cable tie , bellows , stud , (m8 x 90) , element filter , o-ring , coupling hub , anode kit 2 , monitor assy-lube

corporations/Associations/Others

CTN :45257425

03 Jun, 2026 NA

Jamnagar - Gujarat

Tender For annual work of supplying goods and materials for various branches in sikka municipality office. - hand broken stone aggregate 25mm size to 90mm size , hand broken stone aggregate 40mm size to 63mm size. , crushed stone aggregate 40mm to 63mm size , crushed stone aggregate 40mm size , crushed stone aggregate 6mm to 10mm size , crushed stone aggregates 20mm siz , crushed stone aggregates 10mm size , earth , moorum , aluminium paint , anodised aluminium butt hinges 75 mm x 63 mm x 3.2mm , anodised aluminium butt hinges 50 mm x 45 mm x 3.2mm , anodised aluminium screw 40mm , anodised aluminium screw 30mm , anodised aluminium screw 20mm , angle size 15 x 15 cm. (glazed) , anticorrosive bituminous paint (black) , asbestos rope , black japan paint , bitumen washer , battens 50mmx25mm , battens 50mmx50mm , battens 75mmx50mm , battens 75mm x100mm. , billimora bricks , bat clamps 80 mm dia , bevelled edge mirror 600mm x 450mm , blasting powder , binding wire , black stone for cooking platform , bolts 12 mm dia 10 cm. long , brass screw down bib type. 15mm dia. , steel hysd , brass screw down bib type. 20mm dia , c.i. grating 100x100 mm , brick aggregate 40mm size , cast iron cover , c.i. cover with frame 500mm x 700mm inside , c.i. cover without frame 300mm x 300mm inside , c.i. cap gril as per std. design , c.i. cover with frame 455mm x 610mm inside , c.i. cover with frame 600mm x 850mm inside , brass screw down stop cock 15 mm dia , brass screw down stop cock 20 mm dia , brass screw down stop cock 25 mm dia , c.i. cover with frame 455mm x 610mm , 12.5 litre high level c.i. flushing cistem with fittings , brick aggregate (single size):40 mm nominal size , cast iron spigot and socket soil pipe 100mm , cast iron spigot and socket soil pipe 75mm , c.i. ring painted with coal tar , c.i. or m.s brackets , c.p. brass screws & washers 25 mm size , c.p. brass 1/2 turn flush cock 20 mm dia , c.p. brass 1/2 turn flush cock 25 mm dia , c.p. brass 1/2 turn flush cock 32 mm dia , portland cement , common burnt clay bricks conventional size , cold twisted bars , coarse sand , common burnt clay modular bricks class designation 12.5 , stone aggregate(single size):40 mm to 63 mm nominal size , stone aggregate(single size): 40 mm nominal size , stone aggregate(single size):20 mm nominal size , stone aggregate(single size): 10 mm to 20 mm nominal size , stone aggregate(single size): 10 mm nominal size , stone aggregate(single size): 06 mm to 10 mm nominal size , distemper primer , devdar wood and planks , dark shade pigment , copper metal ball cock 25mm dia , copper metal ball cock 50mm dia , dry distemper , enamel paint , flat back wash basin 550mm x 400mm size , fibre base bitumen saturated under layer type-l , fibre base self finished felt type-ll. grade , fine sand , galvanised steel plain sheets , galvanised steel j or l hooks 8 mm dia , g.i. plain washer , flat back wash basin white vitrious china 450mm x 300mm size , flat back wash basin white vitrious china 550mm x 400mm , fly ash bricks , providing and laying g.i sheet 0.8mm thick corrugated , g.i. j or l hooks , g.i.barbed wire , fuel steam coal , g.i. pipe 30 cm long 50 mm dia , galvanized m s tubes (medium grade) 25 mm dia. , galvanized m s tubes (medium grade) 15 mm dia , glass 2 mm to 3 mm thick , 150 mm internal dia. half-round s.w.chenel 60 cm long , galvanised mild steel tube medium grade 20mm dia , galvanised mild steel tube medium grade 32mm dia , galvanised mild steel tube medium grade 40mm dia , galvanised mild steel tube medium grade 50mm dia , galvanised mild steel tube medium grade 65mm dia , galvanised mild steel tube medium grade 80mm dia , gauge plate , glass shelf with c.p. guard rail and brackets 600mm x 120mm , gun metal screw down bib tap-15 mm dia , gun metal screw down bib tap-20 mm dia , gun metal screw down bib tap 15 mm dia. , gun metal check or no return fullway wheel valve 25 mm. dia , gun metal wheel valve 15mm dia , gun metal wheel valve 20mm dia , gun metal wh

Micrometer Gauge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors