Latest modular table Tenders | Government modular table Tenders

State Government

CTN :39787014

01 Apr, 2025 34.27 Lacs

Jaipur - Rajasthan

Tender For budget announcement 2023-24 57(1) (f) institute of dermatology for centre of excellence in charak bhawan at sms hospital, jaipur civil work (234.00 lacs) at p.w.d. sub dn.-sms hospital-ii, jaipur. (supply of furniture) - conference table: supply of conference table size 7680x3050x750mm made of white oak wood, oak veneer and ss 304 frame. top thickness 30mm made of bwp plywood with white oak veneer pasting on both sides and edges covered with 30x23mm thick white oak wood with miter joints, modesty panel inner and outer shall be made of 18mm thick bwp plywood with white oak veneer pasting. the legs (08 nos.) shall be made of ss 304 grade with pvd coating. table top shall be supported with 02 nos. 40x25mm ms hollow pipe black powder coated which are connected to ss legs. all wood surfaces shall be polished with water based nontoxic pu polish. electrical pop-up box/cable cubby (16 nos.) with built in sockets as per requirement along with wire management system shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., high back chair cushioned : supply of high back chair size 650x580x1200 mm with cushioned seat and back rest. the seating height of the chair ranges from 425mm to 545mm from floor. the seat and back are made up single piece l-plywood and upholstered with leatherette and molded polyurethane foam of density 40 kg/m3. the cushioned armrests are injection molded from polypropylene. the mechanism is designed with features such as knee tilt, 360 degree revolving type, upright position locking back, seat / back tilt adjustment. the chair shall have pneumatic height adjustment of 100mm & class 3 gas lift. ss finish base fitted with 05 nos. of twin wheel castors which are injection molded in black nylon. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, chair :supply of chair size 500x500x900mm. the seat and back is made up of 12mm thick hot pressed plywood and upholstered with leatherette and polyurethane foam of density 40 kg/m3. the one piece armrests are injection molded from black polypropylene. the frame is made of dia 19mm x 2mm thick m.s. tube with ss finish. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, storage cabinet : supply of storage cabinet size 900x450x750mm made of white oak wood & oak veneer. the cabinet frame section 35x23mm & legs section 33x33 shall be made of solid white oak wood. side panels / shutters / drawers made of 18mm thick bwp plywood with white oak veneer pasting. stone top 20mm thick shall be provided which is pasted on 18mm thick bwp plywood. all wood surfaces shall be polished with water based nontoxic pu polish. good quality telescopic channel/hinges/locks etc. shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., computer table : supply of computer table size 1200x

State Government

CTN :39556276

28 Mar, 2025 NA

Delhi - Delhi

Tender For corrigendum : supply of revolving chair (v4) (q2) ( pac only ) , executive table (v3) (q2) ( pac only ) , office chair (v3) (q2) ( pac only ) , composite office tables confirming to is 8126 (v2) (q2) ( pac only ) , cafeteria chair (q2) ( pac only ) , modular table (v2) (q2) ( pac only ) , steel shelving cabinets (adjustable type) confirming to is 3312 (v3) (q2) ( pac only ) , steel bookcases confirming to is 7761 (v2) (q2) ( pac only )

Central Government/Public Sector

CTN :39422061

17 Apr, 2025 NA

Cuddapah - Andhra Pradesh

Tender For corrigendum : supply of composite office tables confirming to is 8126 (v2) (q2) , modular table (v2) (q2) , revolving chair (v4) (q2)

State Government

CTN :39847730

17 Apr, 2025 NA

Hazaribag - Jharkhand

Tender For supply of modular table / meeting table / centre table (v2) (q2) , wooden book case (q3) , sofas (v2) (q3) , office chair (v3) (q2) , revolving chair (v4) (q2) , steel shelving cabinets (adjustable type) confirming to is 3312 (v3) (q2) , desks and bench/chair set for classroom/training area (q2) , modular work stations (v2) (q3) , executive table (v3) (q2)

State Government

CTN :39847752

17 Apr, 2025 NA

Hazaribag - Jharkhand

Tender For supply of modular table / meeting table / centre table (v2) (q2) , sofas (v2) (q3) , office chair (v3) (q2) , revolving chair (v4) (q2) , steel shelving cabinets (adjustable type) confirming to is 3312 (v3) (q2) , wooden book case (q3) , desks and bench/chair set for classroom/training area (q2) , modular work stations (v2) (q3) , executive table (v3) (q2)

Central Government/Public Sector

CTN :39836425

09 Apr, 2025 NA

West Nimar - Madhya Pradesh

Tender For supply of desks and bench/chair set for classroom/training area (q2) , modular table / meeting table / centre table (v2) (q2) , office chair (v3) (q2)

Central Government / Public Sector

CTN :39848563

17 Apr, 2025 NA

Tirupati - Andhra Pradesh

Tender For supply of ready mixed paint, air drying, red oxide, zinc chrome, priming for coach exterior painting to is: 2074 -2023 with additional requirements as per table-2 of is 2074: 2023. shelf life (keeping properties): not less than one year from date of manufacturing. packing condition : packing in 20ltrs. new non-returnable m.s. drums to is:2552/89 with amendment no.1, grade b2.

State Government

CTN :39847685

07 Apr, 2025 NA

Kalaburgi - Karnataka

Tender For supply of office chair (v3) (q2) , modular table / meeting table / centre table (v2) (q2) , wooden book case (q3) , executive table (v3) (q2) , computer table (v2) (q2)

Central Government/Public Sector

CTN :39826384

22 Apr, 2025 NA

Dibrugarh - Assam

Tender For tender for supply of surgical and consumables hospital furniture etc to assam medical college hospital dibrugarh - supply of surgicals, consumables and hospital furniture, absolute alcohol, absorbable gelatine sponge ip 66 80mm x 50mm x 10mm, absorbent cotton wool ip 300gm roll, adhesive tape 7.5cm x 5 mtr spool, alcohol swab, aldheyde free disinfectant, anti septic solution 1000 ml, bandage 90cm x 18mtrs,, betadin ointment tube/nanz/ collapsible tube, betadin solution 500ml (5%), bleaching powder, cannula fixer, cidex solution 2.45% 1000 ml, collagen sheets 10 x 10cm, cotton crepe bandage b.p. size: 4mtr x 6 cm, cotton roll 500gm, disinfection solution 5 ltrs jar, elastic adhesive bandage 10cm x 1mtr, formalin, gauge cloth 90cm x 18mtr, gauge swab non sterilized, gauge swab sterilized, glycerol, hand sanitizer, hand wash 500ml bottle/, hydrogen peroxide, hypoallergenic non-woven tape, size: 5m x 2.5cm, hypoallergenic non-woven tape, size: 5m x 5cm, lysol, mackintosh sheet, methylated spirit 1 ltr jar, micro-porous plaster size: small/each box, micro-porous plaster size: big/each box, paper adhesive size: 1" x 9.0 mts, paraffin gauge dressing b.p. size: 10cm x 10cm, phenyl 450 ml bottle, phenyl solid, plaster of paris bandages bp size: 15cm x 2.7 mts, plaster of paris bandages bp size: 10cm x 2.7 mts, raxin sheet, rectified spirit 450ml, roll bandage 10cm x 5mtrs, rolled bandage 5cm x 5mtrs, 100gm/doz, rolled bandage 5cm x 5mtrs, 60gm/doz, savlon, senitary napkin, sodalime 5kg jar, surgical gauge pad, back rest, bed side screen 4 fold, biomedical waste bin trolley, door screen white, size: 200cm x 114cm/, dressing trolley, dressing trolley big size, ecg trolley, foot step (double step), foot step (single step), fowler bed (deluxe), hygiene trolley, icu bed (fowler), icu bed (mannual), icu bed with remort control, instrument trolley, instrumet cabinet, medicine cabinet, medicine trolley, mosquito stand, orthopedic bed, oxygen cylinder carrying trolley, oxygen cylinder trolley (d-type) 140cm hight tubular ms frame work fitted with wheel 125mm dia., patient carrying trolley, patient examination bed, patient examination couch, patient examination table, pediatric bed, revolving stool, revolving stool ss, saline warmer, semi fowler bed, semi fowler bed (super) with mosquito net stand, sevotec veporiser, stretcher, stretcher on trolley, waiting chair (regular), ward bed (general), wheel chair, mosquito artery forceps, speculam, pvc pipe for central line, reservior bag for anaesthesia machine, anathesia face mask 0,1,,2,3, black rubber mask 1,2,3,4, uterine sound, towel clip, ecg paper for schiller machine model at2 per packet, ecg paper for edan machine per packet, laryngeal mask airway size 1,1.5,2,2.5, i gel size 1,1.5,2,2.5, bowl stand, sterlized drum trolley, volcellum, post vaginal well retractor, cup t removal hook, anti vaginal well retractor, cunalty, coscors self retractor, angle lip retractor, hegari dilator, theraputic paraffin wax, absolute alcohol (denaturated alcohol), absorbable gelatine sponge ip 66 80mm x 50mm x 10mm, absorbent cotton wool ip, 300 gm roll, adhesive tape, 7.5cm x5mtr spool, alcohol swab, aldheyde free disinfectant, all container vial ( non vaccum, non iradidiated), clot. activitor, b cit 3.2%, glucose, edta, esr, etc., all container vial (vacuum, iradidiated), clot. activitor, b cit 3.2%, glucose, edta, esr, z no add, k2, k3, allies tissue forceps, size: 6 , 8 , autoclave big, size:big, autoclave, size: medium, autoclave, size:small, b.p. bulb, b.p. handle stainless steel, size: 3, b.p. handle stainless steel, size: 4, bandage cloth, size:90cm x 18mtrs, 325gm, barium sulphate 5 kg jar, bed pan, betadin solution 500ml (5%), bleaching powder, blood administration set disposable sterilized, bp blade, size: 11,15,20,21,22,23,24, bp instrument stand type, bp instrument (mercurial) table model, b.p instrument (digital), cannula (3 way), cap (disposable), carbon di oxide b-type cylinder (as per latest iso s

State Government

CTN :39827512

04 Apr, 2025 NA

Delhi - Delhi

Tender For providing and installation of furniture and miscellaneous related works in east study centre, tahirpur, sol, university of delhi - ws3 - workstation with front divider between tables - 900x550 x 750mm table - 25mm thick pre -laminated particle board of approved shade. the working and non working edges shallbe finished with machine pressed pvc edge banding. the table top shall be supported with ms powder coated "c" shaped leg (50 mm x 50mm thickness) with connectors. provision of wire tray for wire raceway passingwith ends legs cover 18mm thick plpb. laminate shades to be approved by client before execution, ws 6 - workstation table for director/ dy.director/ principal - similar to exisiting at sol north 2400x900x750 , including side credenza and back credenza main table - 2400x900x750supplying desk with main table of size 2400mm x 900 x 750mm(h) and drawer box consisting three drawers lockable. the worktops shall be made of superior quality 25mm thick ply board of grade ii, type ii confirming to is: 12823 of approved shade. the top and side panels will be claded with s laminate of thickness 1mm, one no. of modesty panel and sides shall be provided made of 18-25mm thick laminated ply board of, confirming to is: 12823 of length as per design. wire managers and computer tray shall be provided on table top with 55-60mm dia to hold wires. all exposed edges of table shall have 2mm thick hot melt pvc banding.side credenza - 1200x450x600mmside rack 1200 x 450 x 600mm (h) (ply board)supplying of top shall be made of superior quality 25mm thick particle board of grade ii, type ii confirming to is: 12823 of approved shade. the top and side panels will be claded with laminate of thickness 1mm and 18mm thick and back closed with 9mm thick pre laminated plyboard and with sliding or openable door lockable including lockable drawers and as required nos of shelves shall be provided made of 18mm thick laminated particle board of grade ii, type ii, confirming to is: 12823 of length as per design. all exposed edges of table shall have 2mm thick hot melt pvc banding.back credenza - 2400x450x600mmsupplying of swing door storage unit- the carcass is made out of 18mm thick plyboard top, sides, door, shelves and 12mm thick ply board with both side laminate. the doors are made up of 18mm thick plyboard with prelaminate with hinges, handles & locks . the storage unit is provided with levellors for height adjustment with the help of levellors .laminate shade as per selection, storage- 900x450x850mm supplying and placing in position of wooden storages of size 900mm(w) x 450mm(d) x 850mm(h) metalstorage consisting of swing door, side panels, top panel, back & shelves including base/skirting. the storage is made up of 25mm thick and 18mm thick pre-laminated particle board with 0.8mm thick crca sheet (as per is:513)cladding on both sides and top is made up of 11mm thick bent metal tops made up of 0.8mm thick crca sheets (as per is:513). metal cladding and top are powder coated with epoxy polyester powder of 50 +/- 10 microns thickness. the storage unit is provided with 2 hinge doors made up of 18mm thick pre-laminated particle board with decorative laminate on front side and backing laminate on backside. opening door of the storage to have aesthetically appealing recess handle of aluminium extrusion. the storage unit is provided with two nos of adjustable shelves to be supported adequately by specified hardware. uniformly distributed load carrying capacity of each shelf shall be 40kg. metal storage to be with 3 point central locking arrangement. each storage unit shall be provided with a metal skirting of 15omm(h) along the width of the unit made up of 0.8mm the skirting is powder coated with epoxy polyester powder of 50 +/- 10 microns thickness. storage unit to be provided with 4nos screw type adjustable leveler with plastic base with 10mm adjustment. laminate shades to be approved by client before execution, centre table- 1000x1000x425mm providing

Modular Table Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors