Latest motor blower Tenders | Government motor blower Tenders

Central Government/Public Sector

CTN :39587311

14 Mar, 2025 NA

Multi City - Multi State

Tender For supply of blower complete with motor (mvsi) for cooling rectifier block as per clw spec. clw/es/b-14 alt.c and to rdso spec. e-10/3/08 revised september.95 with amendment no.1 and 2.

Central Government/Public Sector

CTN :39549414

13 Mar, 2025 NA

Erode - Tamil Nadu

Tender For supply of motor for traction motor blower (mvmt) 26 kw, 2945 rpm, 290-500 volts, 6313 c3 bearing, insulation class "h" clw/es/b-14-c. rating: 26kw,2pole, mvmt motor, nd200l , drg no: c20060 / mvmt -1/rdso [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39550160

27 Mar, 2025 NA

Jodhpur - Rajasthan

Tender For supply of blower for oil cooling unit with casing including 30 kw motor for ocu as per specification no .rdso/2016/el/spec/0123, rev (0) or latest and spec/e-10/3/09 (motor) with amendment nos. 01 to 05. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39549411

13 Mar, 2025 NA

Erode - Tamil Nadu

Tender For supply of 3 phase induction motor suitable for smoothing reactor cooling blower (mvsl) conforming to rdso spec. no. e/10/03/08 (revised) sept. 1995 with amendment no. 1 & 2. and clw specn. no.clw/es/b-14/c .

Central Government/Public Sector

CTN :39222981

04 Mar, 2025 NA

Uttara Kannada - Karnataka

Tender For corrigendum : procurement of refit ac spares for icgs - lp pressure gauge range 1.1 20 kg cm2 , hp pressure gauge range 0 30 kg cm2 , cooling thermostat kp 69 danfoss , op cut out mp 55 danfoss , ahu motor pulley od 130mm shaft dia , discharge valve reed 06da502913 , blower belt a800 a 38 , blower mounting , oil separator av 06 1 4 , compressor center bearing 06da 5036 , terminal plate v6d602 , valve plate set 6d75 102 , heater v6d 701 , shaft bush washer 6d75333 , gasket set 1744079 , piston ring 1740055 , piston set with pin 06dr 754 , op pressure gauge range 1.1 20kg cm2 , 1 4 slide glass , oil pressure switch mp 55 , thermo state kp 69 kp 69 , connecting rod 6da 0042 , oil pump 6da 660 , crank shaft 6d75701

State Government

CTN :39500813

05 Mar, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 9 numbers of district level water testing laboratories of jharkhand a-dumka zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230a15 volts a/c), stirring capacity: 50-1500 rpm, capacity of stirrer: 2 litre, plate size: 18.4x18.4 cm(approx.), make & model: branded, bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is stan

Central Government/Public Sector

CTN :39501541

31 Mar, 2025 NA

Barauni - Bihar

Tender For supply of oil cooling blower motor of continuous rating 30 kw [centrifugal design] for three phase locomotive). specification: rdso spec. no. e-10/3/09 [motor] amendment- 1 to 6 as per rdso letter no. el/3.2.176/2 dt. 21.05.10

Central Government And Public Sector

CTN :39486094

10 Mar, 2025 NA

Bhilai - Chhattisgarh

Tender For supply of circuit breaker to traction motor blower and oil cooling unit (pos no. 53.1, 59.1) type 17 , as per abb document no. hbtb 585554r3083 and auxiliary contact as per abb id no. hbtb585557 r1200 confirming to clw spec no. clw/es/3/0096 alt-l [ warranty period: 30 months after the da te of delivery ]

CTN :39460812

10 Mar, 2025 NA

Kanchrapara - West Bengal

Tender For supply of motor for smoothing reactor cooling blower for locomotive (mvsl -h cla ss) specn.drg.no.- clw/es/b-14/c (pt.ii) and rdso.specn.no.e -10/3/08. with amendment 01& 02 [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :39460782

10 Mar, 2025 NA

Ranipet - Tamil Nadu

Tender For supply of motor for transformer oil cooling blower for locomotive (mvrh-h class) s pec. drg. no. rdso specn. no. e- 10/3/08 (revised) amendment no. 1 and 2 and to clw specn. no. clw/es/b-14/c(pt.ii) [ warranty period: 30 months after the date of delivery ]

Motor Blower Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors