Latest motor module Tenders | Government motor module Tenders

CTN :38599277

27 Dec, 2024 5.30 Lacs

Bardhaman - West Bengal

Tender For transportation, installation with necessary fabrication of one no. 300 mtr. head turbine pump-motor-base frame set including civil jobs, placing of starter-cable n fitting of pipeline at 75l/-14d of r-viia seam at 3n4 incline unit, jhanjra project co

CTN :38533480

27 Dec, 2024 5.30 Lacs

Multi City - Multi State

Tender For transportation, installation with necessary fabrication of one no. 300 mtr. head turbine pump-motor-base frame set including civil jobs, placing of starter-cable & fitting of pipeline at 75l/-14d of r-viia seam at 3&4 incline unit, jhanjra project colliery.

corporations/Associations/Others

CTN :38528065

24 Dec, 2024 1.40 Crore

Chitradurga - Karnataka

Tender For supply and installation of 750 hp vertical turbine motor pump at shanthi sagara jackwell in shanthisagara water supply system of chitradurga cmc

State Government

CTN :38402559

27 Dec, 2024 NA

Chennai - Tamil Nadu

Tender For supply of machineries & equipment for the electrician, fitter, lift & escalator mechanic, mechanic motor vehicle, machinist, operator advance machine tools, refrigeration air conditioning technician, solar technician, technician medical electronics, wireman, & welder trades.. - ac - air conditioner schedule, frost free refrigerator 200 l, three/four door refrigerator invertor (type), evacuating and refrigerant charging station, split a/c 1.5 ton with r32 refrigerant, duct able split a.c 3 ton with r410a or r-32 scroll compressor, cassette air conditioner 4500 kcal/hr, de scaling pump set, water cooler storage type, air conditioning, direct system complete with all controls including humidity control., air-conditioning, indirect system. (water cooled ), package a/c 5-ton capacity, bus a/c tutorial model, automatic ice cube m/c 50 kg/hour, vrf/vrv unit with two indoor units, split a/c (invertor technology), walk in cooler puf, air conditioner split type 2 tonne, au - automobile schedule, working model of air brake assembly, full floating axle and semi floating axle assembly, automative exhaust 5 gas analyser and diesel smoke meter (for petrol & diesel), diesel engine crdi - 4 stroke for dismantling and assembling with swiveling stand., multi scan tool to scan engine, abs & ebd, at, srs, body control and immobilizer, cut section of 6 cylinder diesel engine in moving condition to show movement of internal parts, diesel engine six cylinder in running condition, air bag simulator, air conditioning service unit (car), four stroke petrol engine with cng setup-working condition, mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling, transfer case with stand for dismantling and assembly., two post car lift capacity 4000 kg, tyre changer machine motorized pneumatic type,, ultrasonic injection cleaning equipment, wheel alignment machine computerized 3d, wheel balancing machine, working condition of petrol mpfi engine assembly with fault simulation board, el - electrical schedule, oil testing kit:, solar panel 18 watt with battery, d.c. shunt generator with control panel 2.5kw,220v, motor-generator 5 kw (ac to dc), d.c. compound generator with control panel, motor- generator (dc to ac), synchronous motor 3 phase, 3 hp, 440 volt, 50 hz,4 pole, with all panel board accessories, three phase transformer shell type, electrical machine trainer, diesel generator set, dc generators series, shunt & compound type, solar street light, solar traffic light, solar d.c pump, solar panels, solar street light lamp set, motor- generator 3 kw (ac to dc), es - solar schedule, weather monitoring station, solar cell based sunlight radiation meter, solar simulator for solar cell characteristic study, iv curve tester, sun path finder, solar energy trainer with grouping of solar cells., solar tracker demonstrator kit, solar pv e-learning software using animations for trainee, solar pcu, solar grid tied inverter demonstrator kit, solar, wind, hybrid power plant, used water treatment solar plant demonstrator kit, demonstration kit for wind generation (wind turbine with blower), le - lift & escalator schedule, elevator control panel suitable for 5/8 passenger lift having separate input, output and cable alley chamber fitted with plc controller and related accessories., servo motor trainer 250w, 220/110v, working model of escalator, electromagnet brake assembly, door simulator set (car door, landing door and door drive unit), 5/8 passenger lift installed with all control and safety accessories, lm - light machineries schedule, drilling machine pillar 0-20 mm capacity with swivel table motorized with chuck and key, power hack saw machine 18 hydraulic, surface plate c.i 600 x 600mm with suitable stand and closed cover, slip gauge metric set 87 pieces in a box, work shop grade, drilling machine bench sensitive 13 mm capacity, slotter with base chuck, hm - heavy machineries schedule, pneumatic trainer k

State Government

CTN :38373215

19 Dec, 2024 1.09 Lacs

Multi City - Chhattisgarh

Tender For scope of workscope of work: - (at firms workshop):-1. dismantling of pump and internal checking of pump to analyse the defects.2. checking of impeller, cleaning of impeller and other internal parts.3. checking of stator and rotor can, replacement of ss seamless cans.4. proper fitting of impeller and balancing of impeller.5. checking of stator and rotor windings, rewinding of the same as per requirement.6. checking of bearing, voltage coils, rewinding of coils with class #h# insulation.7. replacement of defective internal parts, components, such as bearings, sleeves, washers, etc.8. testing of motor pump and painting of the body.9. successful trial of pump.10. material & service guarantee shall be applicable for 12 months from the o/h of pump.11. rewound stator shall be tested for winding resistance and compared with original.12. winding resistance of individual phase should not have more than 2% deviation to other phases.13. ir value of motor shall be recorded, before and after completion. complete test report with type of instrument used to be submitted at the time of handing over of the motor.14. motor assembly should be carried out by contractor so that no any damage to overhang portion of winding happen otherwise contractor shall be responsible and will have to repair again.terms and conditions: -1. all man power, t&p, consumables etc. shall be arranged by the firm.2. the firm have to make his own arrangement for transportation of defective pumps from the site to firm's workshop. similarly, the repaired pumps shall be delivered to our site.3. completion period: 5 days for to and fro transportation and 10 days for repairing work. total 15 days.4. payment term: 100 % payment shall be made within 45 days after completion of work satisfactorily on actual work done basis.5. contractual period: 18 months.6. the firm shall submit the gst invoice for payment of service through ra bill. however, release of bills of work as well as supply, the repaired / serviced pumps shall be run on trial for at least 01 hours continuously.7. penalty: penalty will be imposed @rs.1000/-per day or part thereof due to delay in work but limit to 10 % of order value if delay in completing the work.8. in the case of work at site/ plant premises.9. all safety precautions & safety rules shall be followed by the contractor, also necessary safety appliances like gloves, masks, helmet, shoes etc. shall be available to their labour during execution of work.10. if any labour of contractor meets with an accident because of not using the safety appliances, in such cases, if any fine/penalty is imposed on the occupier/factory manager of the power station, than the payment of amount of such fine/penalty or all legal compliance shall be meet out by the contractor.se (turbine)1x500 mw, cspgcl, kwb

CTN :38315785

18 Dec, 2024 2.18 Crore

Thiruvananthapuram - Kerala

Tender For purchase of tool and equipment in mmv and dcm trade in various itis under scdd - tool and equipment in mmv and dcm trade, ammeter dc with external shunt 300a/ 60a, auto electrical test bench, belt tensioner gauge, cleaning tray 45x30 cm, cylinder bore gauge capacity 20 to 160 mm, cylinder liner- dry & wet liner, press fit & slide fit liner, depth micrometer 0-25mm, different type of engine bearing model 10 different types on board, different type of piston model 5 different types on board, fuel injection pump (diesel) inline 4/6 cylinders rsv mechanical pneumatic governor type., fuel injection pump ve pump / distributor fuel rotary pump (dpc) pumps / along with special tools and accessories, injector multi hole type, pintle type, injector testing set (hand tester), automotive oil pump for dismantling and assembling., outside micrometer 0 to 25 mm, outside micrometer 25 to 50 mm, outside micrometer 50 to 75 mm, outside micrometer 75 to 100 mm, starter motor axial type, pre- engagement type & co-axial type, thread pitch gauge metric, timing lighter, turbocharger cut sectional view - latest wgt type to show turbine, impeller and compressor wheels., vacuum gauge 0 to 760 mm of hg., vernier calliper 0-300 mm with least count 0.02mm, automotive water pump for dismantling and assembling, working model of air brake assembly, carburetor solex, mikuny for dismantling and assembling, cut section models of shock absorbers, cut section of cross ply and radial tyres, cut section working model of centrifugal clutch assembly, demonstration board of mpfi system, drum brake assembly in working condition, full floating axle and semi-floating axle assembly, functional/experiment model of different type of sensors, steering assembly, synchronous gear box with stand for dismantling and assembly, automotive exhaust 5 gas analyser and diesel smokemeter (for petrol & diesel), diesel engine crdi - 4 stroke for dismantling and assembling with swiveling stand, diesel engine (running condition) stationary type single cylinder, multi scan tool to scan engine, abs & ebd, at, srs, body control and immobilizer, working condition of diesel engine crdi - 4 stroke engine, assembly with fault simulation board, cut section of 4/6 cylinder diesel engine in moving condition to show movement of internal parts, diesel engine six cylinder in running condition, air bag simulator, air conditioning service unit (car), four stroke petrol engine with cng setup-working condition, mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling, tyre changer machine, ultrasonic injection cleaning equipment., wheel alignment machine computerized 3d (optional), wheel balancing machine, working condition of petrol mpfi engine assembly with fault simulation board, driving simulator, traffic signal board 2m length, 1m breadth, safety cones

Motor Module Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

State Government