Latest ms angle Tenders | Government ms angle Tenders

State Government

CTN :39693405

03 Apr, 2025 50.00 Lacs

Kangra - Himachal Pradesh

Tender For supply of ms angle 40 x 40 x 5 mm as per is 808 1989,ms flat 40 x 6 mm as per is 5986 2011,ms angle 25 x25 x 5 mm as per is 808 1989,ms flat 25 x 6 mm as per is 5986 2011,ms bar 10 mm dia as per is 1732 1989,ms flat 50 x 6mm as per is 5986 2011,ms angle 50 x 50 x5 mm as per is 808 1989,ms sheet 8 x4 1point 0 mm thick,ms structural plate 2500 mm x 1250 mm 6 mm thick conforming to is 2062 steel grade designation e 250 killed semi killed,ms structural plate 2500 mm x 1250 mm 3ponit 15 mm thick conforming to is 2062 steel grade designation e 250 killed semi killed

State Government

CTN :39677522

26 Mar, 2025 NA

Thrissur - Kerala

Tender For auction for brass scrap , 110kv sf6 breaker pole (without actuator) , 220kv sf6 breaker pole (without actuator) , transformer oil drum (rusted and damaged) , 11kv pt (resin cast) , 110kv sf6 breaker pole without bottom box - telk make , 3*300 xlpe and cable , flurocent tube choke , power cable , cooling fan (separated) , ceiling fan , 110kv capacitor unit , 11kv ct resin cast , 11kv cable end , aluminium frames , hardware aluminum parts , 5hp motor with pumb , 5hp motor , 3hp motor , 3 phase motor 0.5 hp , 3 phase motor - 1 hp - 1 nos, 1.5hp-1 nos, 2hp - 5 nos , susi suguna mini monoblock pump set 0.5 hp , 3 phase motor with pumb 1.5 hp , pump honda 1.1 kw 1.5 hp , skm pump 1 hp , arcing horn , disc insulator , ms scrap (fire extinguisher cylinder, sf6 cylinder, ct frames, ms angles.) , 110kv sf6 cb wit structure , surge monitor , barbed wire , 33kv ct , 110kv lighting arrester porcelain , 11kv vcb outdoor with stucture , 33kvpt , 11kv sectionaliser , breather , 11kv 3 * 300 mm2 xlpe al , armoured ug cable , 11kv lighting arrester porcelain , silica gel , vaccum bottle , acsr scrap , iron scrap , 66kv mocb one limb , relay , 11kv ct faulty , 33kv la faulty , 3 phase static energy meter , meter scrap mechanical , voltmeter , ammeter , var meters , power factor meter , mw meter , tri vector meter , control cable (copper) , control cable (aluminium) , 11kv ct resin cast , flurecent tube fittings , xlpe cable scrap , oil drum , damaged disc insulator , control cable damaged , ceiling fan , 11kv vcb bottle , 11kv la , sodium vapour lamb choke , main switch , relay scrap , mv lamb fittings , trivector meter , 3 phase energy meter (mech) , 1 phase energy meter (mech) , mw meter , ammeter , voltmeter , 23ky lighting arrester porcelin , 110/11 kv tfr c & r panel damaged , 110kv feeder control and relay panel damaged , 11 kv la damaged , 11 kv vaccum bottle faulty , 11 kv nct damaged , 11 kv auto recloser damaged , battery charger 110v 15a faulty , voltage transformer 11kv alind arc- damaged , 11kv feeder panel damaged

corporations/Associations/Others

CTN :39492177

03 Apr, 2025 NA

Tuticorin - Tamil Nadu

Tender For corrigendum : procurement of iron and steel materials for unit i to v boiler - m.s. plate 6 mm. thick, as per is 2062, m.s. plate 12 mm. thick, as per is 2062, m.s. angle 65 x 65 x 6, as per is 2062

Trust

CTN :39518258

17 Mar, 2025 3.50 Lacs

Pahalgam - Jammu And Kashmir

Tender For corrigendum : erection of fencing around medical camps by way of providing m.s. angle posts and agronet from chandanwari to mg top and zojibal administrative camp site for yatra -2025

Central Government And Public Sector

CTN :39693528

25 Mar, 2025 30.99 Lacs

Delhi - Delhi

Tender For supply of supply of 3.0 or 3.5 tr single circuit air cooled ductable split ac unit,supply of 1.5 tr single circuit air cooled ductable split ac unit,supply of 2.0 tr single circuit standalone floor standing tower type air cooled split ac unit,supply of 3 star rating 1.5 tr inverter type wall mounting type split air conditioner,supply of 5 star rating 1.5 tr inverter type wall mounting type split air conditioner,itc of 3 or 3.5tr ductable split ac unit,itc of 2 tr tower split ac unit,itc of 1.5 tr capacity split a.c unit,providing fabricating and fixing m s stand a. 40 x 40 x 5 mm ms angle iron,b. 40 x 5 mm ms flat strip,supplying and fixing of powder coated prefabricated ms frame stand,sitc of of following nominal sizes of hard drawn copper refrigerant piping a. 6.4 mm dia od soft drawn with tube thickness 1.2 mm with 19 mm thick insulation,b. 9.5 mm dia od hard drawn with tube thickness 1.2 mm with 19 mm thick insulation,c. 12.7 mm dia. od hard drawn with tube thickness 1.2 mm with 19 mm thick insulation,d. 15.56 mm d

Co-operative

CTN :39603779

21 Mar, 2025 24.83 Lacs

Bengaluru - Karnataka

Tender For supply erection testing installation of kitchen equipments for cattle feed plant at rajanukunte-, rice vessel with stand, a) vessel shall be of 16g ss of inner size 23" diax23" deep., b) stand frame structure shall be of 16g 50mm dia ss pipe., c) 18g ss lid shall be fitted with frame structure for vessel., d) 25mm diass pipe handle shall be provided for tilting the vessel., e) 16g ss perforated sheet shall be provided for vessel as a strainer., f) cross supports shall be provided on 3 sides with front open., g) 25mm dia drain outlet shall be provided for vessel., h) ss grouting plate shall be provided for grouting., i) steam inlet shall be provided on right hand side of the unit., samber vessel with stand, a) vessel shall be of 16g ss of inner size 20" diax20" deep., b) stand frame structure shall be of 16g 50mm dia ss pipe., c) 18g ss lid shall be fitted with frame structure for vessel., d) 25mm diass pipe handle shall be provided for tilting the vessel., e) 16g ss perforated sheet shall be provided for vessel as a strainer., f) cross supports shall be provided on 3 sides with front open., g) 25mm dia drain outlet shall be provided for vessel., h) ss grouting plate shall be provided for grouting., i) steam inlet shall be provided on right hand side of the unit., idli box with stand and also with idli side table with 2 under shelves (600 x 600 x 850+150) & splash back, a) 16g ss 304 quality double layered chamber., b) 3 nos. idli chamber decks of 3 trays per deck. each tray shall be 20 idlis capacity., c) 12 nos. 20g ss 304 quality idli trays with perforation., d) 12 nos ss drip trays below idli tray., e) front water collection tray for idli stand., f) 38mm dia 16swg ss 304 quality pipe uprights with 3 sides 25mm dia 16swg ss 304 quality cross supports with nylon bullet feet., g) ss door with rubber gaskets shall be provided., h) unit shall be provided with independent steam control valve., i) steam inlet shall be provided on right hand side of the unit., plate rack of five shelves, a) the verticals shall be in ss 38mm dia 16g 304 quality pipes with adjustable nylon bullet feets, b) the shelves of 18g 304 grade shall be down beeded 38mm on all sides and 12mm towards inside., c) bottom shelf shall be provided 150mm above & remaining spaced equally., two burner cooking range, a) the frame work of gas range shall be 32x32x3mm thick ss angle., b) cast iron grid of size 400x400mm shall be provided over the burner., c) 20g ss 304 quality sheet with performance shall be provided on 3 sides & removable front control panel shall be of 20g ss 304 quality steel., d) 20g ss 304 quality sheet handle with ss 22 g 304 grade spillage tray below the burner wil be provided., e) bottom cross supports shall be of 25mm dia 16swg ss 304 quality pipes., f) top shall be of 16 swg ss 304 quality sheet with the cutout to receive 1 no cast iron grid., g) vertical supports shall be of 38mm dia ss pipes 16swg 304 quality with adjustable nylon bullet feet., h) gas inlets on both sides shall be given., i) two high pressure gas burner., dosa plate, a) the frame work of gas range shall be 32x32x3m thick ss angle., b) vertical supports shall be of 50mm dia ss pipes 16swg 304 quality with adjustable nylon bullet feet., c) four side drain channel shall be given with 16swg ss 304 quality splash on 3 sides., d) one piece polished 25mm thick ms dosa plate with 2 handles on either sides of size 1200x600mm., e) 2 nos. ribbon type "v" shaped burners equally placed under the ms plate to get uniform heat., f) bottom cross supports shall be 25mm dia 16swg ss 304 quality pipes., g) suitable windows with cover shall be made in the front control panel for ignition., h) gas inlets on both sides shall be given., i) 20g ss 304 quality sheet with performance shall be provided on 3 sides & removable front control panel shall be of 20g ss 304 quality steel., j) 150mm high 16g ss 304 grade splash on length side. 304 grade pipe upright with adjustable bullet feet, f

Central Government And Public Sector

CTN :39662308

11 Apr, 2025 NA

Bengaluru - Karnataka

Tender For carriage of light melting scrap(lms) consisting of wagon body (in dismantled/cut conditions), wagon cbc components without rubber (for example couplers and draft gears without pads), wagon bogies (in dismantled condition), wagon end buffers, yoke, knuckles, springs (including springs used in casnub bogies), ms angles, tie bars, erc (elastic rail clips), ms panel sheet & wagon door, ms sheet, scrap ms melting, ms adopter wide jaw and narrow jaw, ms cub spacer, ms shearing plate, bogie frame bolster, ms plate, ms ingot and others; from various railway units in india to rail wheel factory, yelahanka, bengaluru - 560064; under the distance slab of above 1000kms (with a mean distance of 2500kms), by road.quantity:4000mt. note: the work involves other intermediary and ancillary activities such as: (1)collection of lms (2) loading the lms into the vehicle. the contractor shall load only those lms items which are free from rubber components (3)unloading at destination, by railways at free of cost.special note: mandatory documents should be submitted in compliance of bid security, annexure-v, annexure-v(a), annexure-vi(b), power of attorney and iba certification. non-submission of necessary documents in support of the above shall result in summarily rejection of bids.

CTN :39668358

15 Apr, 2025 98.18 Lacs

Jaipur - Rajasthan

Tender For purchase of (a) ms flat 50x6 mm, (b) m.s. channel 100x50x6 mm (c) m.s. angle 50x50x6 mm and (d) m.s. angle 65x65x6 mm against tn-4996

CTN :39671432

02 Apr, 2025 NA

Kargil - Jammu And Kashmir

Tender For supply of ms angle iron post 65x65x6mm 3point20m long , ms angle iron strut posts 65x65x6mm 1point90m long , ms flat iron 50x3mm of length 2point20m long , 3mm dia chain link fencing and size of mesh 50x50mm , galvanized 2 strand steel barbed wire will be of 2point24mm dia , nut 50mm long and 12mm dia and bolts with double washer , line bar of 8mm to support chain link fence

CTN :39677575

18 Mar, 2025 NA

Mehsana - Gujarat

Tender For annual rate contract tender for the work of fabrication of various materials from 65x65x6mm ms angle, 16 sq.mm r/b,50x6mm ms flat, 100x50x6mm ms channel and 50x50x6 mm ms angle & gi 8 swg as per schedule-b for various s/dn under do patan, ugvcl.

Ms Angle Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

corporations/Associations/Others

Trust

Central Government And Public Sector

Co-operative

Central Government And Public Sector