Latest ms arch Tenders | Government ms arch Tenders

State Government

CTN :39567921

03 Apr, 2025 NA

Shahdol - Madhya Pradesh

Tender For purchasing of materials (rcc poles) used in forestry work - rcc pole type - straightlength - 2.00 mdimensions - bottom 10x10 cm square, top 8x8 cm squarecement concrete mix cement, sand and metal ratio 12:4, with 12.5 nominal size coarse aggregate sand used should be free from elay and salt concrete mix shall be conforming to grade m-15 of is-456:2000reinforcement - round vertical bars of 6 mm diameter, 11 no of stirrups of 6 nun drameter round ms bars 20 em centre to cenire.hooks 5 na, bottom hook should be provided 60 cm above the bottom of the pole, second at 82.5 cm, third hook at 1125 cm, fourth hook at 150 cm, top and fifth hook at 195 cm from bottom.manufacturing - in order to ensure desired compressive arenih. rcc fencing poles should be compacted with the help of platform vilaators surface should be uniform and free from voids. the concrete cover aver the reinforcement should not be less than 1.5 cm.

Central Government And Public Sector

CTN :39651940

01 Apr, 2025 NA

Surat - Gujarat

Tender For supply of spare parts of switchgear - position trip interlock bracket assembly of m s cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code misc vcbsp , on and off indicator with holding catch assembly of m s cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 190241118 , worm shaft support with bracket jv7496q - for full teeth of m s cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 4500513144 450041153 , 33 kv ratchet wheel old stopper pawl big old with bar pin and spring driving pawl small old with bar pin and spring as per specification attached , earthing contact asly vc1744e of m s cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 450241039 , flexible connection assly 1250a 1 set - 6 nos. of m s cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 450052034 , spout bushing 1250a 20x20 holes with cc part 1set-6 nos for jv calix panel of m s cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 450088181 , fixed contact plug assembly 3150 a 1 set - 6 nos. of ms cgl make 6.6 kv switchgear supplied at kapp-3 and 4 as per specification attached , door interlock assly calix of m s cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 4502411460 , racking interlock assembly 40 ka - jv7601q of m s cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 4500513201 , saftey shutter asssembly for 1250a of m s cgl make 6.6 kv switchgear supplied at kapp- 3 and 4 having sap code misc vcbsp , saftey shutter asssembly for 3150a of m s cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code misc vcbsp , wire rope for shutter - 02 nos. and nylon bolt and nut - 12 and rollers-02 of m s cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code misc vcbsp , emergency trip cable for panel of m s cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 4500513153 , pole top cap with nylon screw of m s cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code 450161033 and 450086036 , pressure release flapper with hinges of m s cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code misc vcbsp , spring charging cover bolt of m s cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code misc vcbsp , door hinge of m s cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code misc vcbsp , door bolt with pvc washer of m s cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code misc vcbsp , cap nut dom nut of m s cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code misc vcbsp , door knob with pvc washer of m s cgl make 6.6 kv switchgear supplied at kapp-3 and 4 having sap code misc vcbsp

Co-operative

CTN :39603779

21 Mar, 2025 24.83 Lacs

Bengaluru - Karnataka

Tender For supply erection testing installation of kitchen equipments for cattle feed plant at rajanukunte-, rice vessel with stand, a) vessel shall be of 16g ss of inner size 23" diax23" deep., b) stand frame structure shall be of 16g 50mm dia ss pipe., c) 18g ss lid shall be fitted with frame structure for vessel., d) 25mm diass pipe handle shall be provided for tilting the vessel., e) 16g ss perforated sheet shall be provided for vessel as a strainer., f) cross supports shall be provided on 3 sides with front open., g) 25mm dia drain outlet shall be provided for vessel., h) ss grouting plate shall be provided for grouting., i) steam inlet shall be provided on right hand side of the unit., samber vessel with stand, a) vessel shall be of 16g ss of inner size 20" diax20" deep., b) stand frame structure shall be of 16g 50mm dia ss pipe., c) 18g ss lid shall be fitted with frame structure for vessel., d) 25mm diass pipe handle shall be provided for tilting the vessel., e) 16g ss perforated sheet shall be provided for vessel as a strainer., f) cross supports shall be provided on 3 sides with front open., g) 25mm dia drain outlet shall be provided for vessel., h) ss grouting plate shall be provided for grouting., i) steam inlet shall be provided on right hand side of the unit., idli box with stand and also with idli side table with 2 under shelves (600 x 600 x 850+150) & splash back, a) 16g ss 304 quality double layered chamber., b) 3 nos. idli chamber decks of 3 trays per deck. each tray shall be 20 idlis capacity., c) 12 nos. 20g ss 304 quality idli trays with perforation., d) 12 nos ss drip trays below idli tray., e) front water collection tray for idli stand., f) 38mm dia 16swg ss 304 quality pipe uprights with 3 sides 25mm dia 16swg ss 304 quality cross supports with nylon bullet feet., g) ss door with rubber gaskets shall be provided., h) unit shall be provided with independent steam control valve., i) steam inlet shall be provided on right hand side of the unit., plate rack of five shelves, a) the verticals shall be in ss 38mm dia 16g 304 quality pipes with adjustable nylon bullet feets, b) the shelves of 18g 304 grade shall be down beeded 38mm on all sides and 12mm towards inside., c) bottom shelf shall be provided 150mm above & remaining spaced equally., two burner cooking range, a) the frame work of gas range shall be 32x32x3mm thick ss angle., b) cast iron grid of size 400x400mm shall be provided over the burner., c) 20g ss 304 quality sheet with performance shall be provided on 3 sides & removable front control panel shall be of 20g ss 304 quality steel., d) 20g ss 304 quality sheet handle with ss 22 g 304 grade spillage tray below the burner wil be provided., e) bottom cross supports shall be of 25mm dia 16swg ss 304 quality pipes., f) top shall be of 16 swg ss 304 quality sheet with the cutout to receive 1 no cast iron grid., g) vertical supports shall be of 38mm dia ss pipes 16swg 304 quality with adjustable nylon bullet feet., h) gas inlets on both sides shall be given., i) two high pressure gas burner., dosa plate, a) the frame work of gas range shall be 32x32x3m thick ss angle., b) vertical supports shall be of 50mm dia ss pipes 16swg 304 quality with adjustable nylon bullet feet., c) four side drain channel shall be given with 16swg ss 304 quality splash on 3 sides., d) one piece polished 25mm thick ms dosa plate with 2 handles on either sides of size 1200x600mm., e) 2 nos. ribbon type "v" shaped burners equally placed under the ms plate to get uniform heat., f) bottom cross supports shall be 25mm dia 16swg ss 304 quality pipes., g) suitable windows with cover shall be made in the front control panel for ignition., h) gas inlets on both sides shall be given., i) 20g ss 304 quality sheet with performance shall be provided on 3 sides & removable front control panel shall be of 20g ss 304 quality steel., j) 150mm high 16g ss 304 grade splash on length side. 304 grade pipe upright with adjustable bullet feet, f

Central Government/Public Sector

CTN :39689186

27 Mar, 2025 NA

Mumbai - Maharashtra

Tender For sale of property by the jammu & kashmir bank ltd, zonal office -mumbai v/s. ms. archana s k

Central Government/Public Sector

CTN :39689608

27 Mar, 2025 30.77 Lacs

Mumbai - Maharashtra

Tender For sale of property by the jammu & kashmir bank ltd, zonal office -mumbai v/s. ms. archana s k

CTN :39670457

02 Apr, 2025 NA

Mumbai - Maharashtra

Tender For supply of gtfe section electro static smokes and fume filtration system with blower motor assembly having 4000 cmh air handling capacity with pre and post filters, ht power pack control panel etc. , gtfe section suction ducting for 4k system gi spiral type ducting with all fittings to cover test rig approx.dia. range-150-300mmx10m , gtfe section exhaust ducting for 4k system-gi rectangular ducting with elbow and other fittings 350 mmx 350mmx 10 mtr , gtfe section fume extractor stand size 1400x1200x1000 , gtfe section wall cut-out and sealing , gtfe section minor fabrication works and duct support , gtfe section installation charges and commissioning charges , gtfe section packing and transport charges , fip section electro static smokes and fume filtration system with blower motor assembly having 6000 cmh air handling capacity with pre and post filters, ht power pack control panel etc. , fip section suction ducting for 6k system gi spiral type ducting with all fittings to cover test rig approx..dia. range-165-400mmx15m , fip section exhaust ducting for 6k- gi rectangular ducting with elbow and other fittings 460 mmx 460mmx10 mtr , fip section self- standing suction arms along with separate pillar support for 6k system , fip section electro static smokes and fume filtration system with blower motor assembly having 1000 vertical cmh air handling capacity with pre and post filters , fip section fume extractor stand for 6k system , fip section wall cut out and sealing , fip section minor fabrication and duct support , fip section installation charges and commissioning charges , fip section packing and transport charges , 4k machine high voltage power supply 50 watt output -6kv, 12 kv dc , 4k machine pre- ai wire mesh with ms powder coated casing , 4k machine after al wire mesh with ms powder coated casing , 4k machine non- woven media type , 4k machine demister pad type , 4k machine standby electrostatic filter cell for quick change during saturation , 6k machine high voltage power supply 50 watt output -6kv, 12 kv dc , 6k machine pre- ai wire mesh with ms powder coated casing , 6k machine after al wire mesh with ms powder coated casing , 6k machine non- woven media type , 6k machine demister pad type , 6k machine standby electrostatic filter cell for quick change during saturation , 1k-v machine high voltage power supply 30 watt output -6kv, 12 kv dc , 1k-v machine pre- ai wire mesh with ms powder coated casing , 1k-v machine after al wire mesh with ms powder coated casing , 1k-v machine non- woven media type , 1k-v machine demister pad type , 1k-v machine standby electrostatic filter cell for quick change during saturation , fn1 cleaning powder and cleaning tank 30 kg , fn1 cleaning powder and cleaning tank

CTN :39651307

19 Mar, 2025 53

Multi City - Karnataka

Tender For providing of material department of rdpr antharasanthe grama panchayath - coarse sand (zone iii).gp,., broken stone aggregate 20 mm size.gp, broken stone aggregate 12 mm to 10 mm size.gp, portland cement.gp,., broken stone aggregate 40 mm size.gp, coarse sand (zone iii).gp, brick.gp, tmt bars fe 500.gp, size stone 20 x 20 x 25 cms.gp, rubber beading for shutters beading.gp, nylon rollers.gp, mathi/nandi wood planks for panels 25 mm thick.gp, honnewood planks for panels 20 mm thick.gp, honne wood.gp, cleat angles.gp, chrominum plated screws.gp, broken granite metal 20 mm.gp, boulders.gp, bond stone 20 x 20 x 45 cm.gp, aluminium window frame section 1.20 mm thick.gp, alluminium tower bolt - 20 cm.gp, alluminium handles - 15 mm.gp, gp5.50 mm thick plain glass.gp, binding wire.gp, plasticizer super plasticizer.gp, portland cement.gp, pvc edge beading.gp, m.s rods.gp, pvc pipe of 4kgcum,90 mm.gp,., cost of 6.5mm m.s. coil.gp, anticorrosive bitumastic paint.gp, gp20 mm x20mm vertical m.s square rod.gp, gp12x12 m.s square rod.gp, ms flat.gp, whitening.gp, vitrified tiles 10 mm thick 600 x 600 mm.gp, spacers for vitrified tiles.gp, sealer for vitrified tiles.gp, ready mix primer paint (ready mix red lead paint).gp, grout for vitrified tiles.gp, enamel metal paint.gp, ceramic tiles 30 x 30 cms.gp, adhesive for tiles.gp, gp 50 mm dia ms hollow pipe b class 14 gauge.gp, plastic emulsion paint.gp, enamel paint.gp, dry distemper.gp, polythylene pipes high density 32mm external dia.gp, glazed tiles 300x450.gp, polyenthylene water storage tank of specified capacity l.gp, border tiles 30 x 10 cms.gp, table moulded bricks of class designation 50( non modular ).gp, c i manhole cover with frame.gp

CTN :39581108

17 Mar, 2025 2.6 Thousand

Bangalore - Karnataka

Tender For providing service for flowers arrangement and loose flowers to honorable chief minister, ministers, chief secretary, secretary and other vip chambers at vidhanasoudha, vikasasoudha and ms building, bangalore-01 for a period of two years from the date of approval through e-procurement in 2 cover system.

CTN :39641966

31 Mar, 2025 NA

Purnia - Bihar

Tender For supply of steel tubes, tubulars and other steel fittings as per is 1239 (part 2 - steel pipe fittings) (q3) , steel pipes for water and sewage as per is 3589 (q3) , alum tower bolt 100 mm long bolt dia 12mm comma barrel dia 13mm , gi nails 3 by 4 inch 20mm , gi nails 2 inch , pvc rawl plug 100 nos pkt , tools kit for trades man , plain glass panes 3 mm thick , wooden beading of size 20mm x 6mm x 8 feet , wooden beading of size size 20mm x 6mm x 20 feet , round plug wooden comma 25 mm , aluminium door stopper 100 mm long with leg , alum bow handle 150 mm rod dia 12 mm , bracket for curtain rod ss , gi screw 20 mm comma 25 mm comma 35 mm comma 50 mm , haps and staple 100 mm long comma ss , hasp and stapple 75 mm long comma ss , stainless steel wire mesh 0 point 36 mm width of aperature 1 point 40 mm 15 mtr roll , plywood 8 feet x feet x 4 mm thick , screw steel 15 to 75 mm , putty i kg pkt , alumn sheet 0 point 5mm thick comma 1 mtr wide 24 gauge , stainless curtain rod 19 mm dia x 12 ft lenght , super flush strip 100 mm wide 10 mtr long , gate valve 20mm brass , hacksaw blade 25 mm x 300 mm , gate valve 15 mm brass , gate valve 25 mm brass , m seal , water storage tank 1000 ltr isi marked , cp bottle trap for whb 32 mm dia , tank cover pvc for 500 and 1000 ltr capacity with fixing arrangement , brass jumper washer for 15 mm bib tap , gi hook for pipeline , gi check nut 20 mm , gi check nut 25 mm , ms angle bracket for whb , pipe 32 mm dia for l f pvc flush pipe , cement 50 kg opc 43 grade , white cement 1 kg , pad lock 6 lever , drill bit for brick hole 4 mm comma 5 mm comma 6 mm comma 8 mm and 10 mm bid number/ & ( * ) : gem/2025/b/6022003 dated/ + : 10-03-2025 bid document/ 3 3 1 / 68

Central Government And Public Sector

CTN :39626265

18 Mar, 2025 1.82 Lacs

Ghaziabad - Uttar Pradesh

Tender For repairing of electrical assets in te chhoulas, bts chhoulas, dadri (old), falanda bangar, thora (gr noida). - wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface / recessed in medium class pvc conduit, with piano type switch, phenolic laminated sheet, suitable size ms box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required.a) group a, wiring for ckt wiring with 3 x 1.5 sqmm pvc ins cu cond single core in pvc conduit etc., wiring for with 3 x 4 sqmm pvc ins cu cond single core in pvc conduit etc., wiring ckt/power wiring 6 x 4 sqmm pvc ins cu cond single core in pvc conduit etc., supply & fixing metal box of 180 mm x 100 mm x 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front i/c providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps piano type switch connection, painting etc. as required., s/f of switch 5a piano type,connection etc, s/f of socket 3 pin 5a piano type,connection etc, s/f cu wire 2 core 1.5 sqmm etc, sitc of 20 watt 1200 mm led tubelight fitting omplete with all accessories etc. as required. (m/s bajaj/ surya,/ philips or similar superior make)-, sitc of ceiling fans 1200 mm sweep 2star rating complete with all accessories etc. as required. (m/s havells- es-neo/es-plus or similar superior make), s/f of regulator piano type,connection etc, supplying and fixing of dp sheet steel enclosure in recess or surface with 25/32 amp, 240 volt, c curve dp mcb i/c connection etc as reqd. -- for ac, laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of upto 35 sq. mm on wall/ surface/ in loop as required., pdg.& fixing 6 swg gi wire on surface or in recess for loop earthing alongwith the existing surface/recessed / cable etc.as required., s/f 4 sqmm frls pvc insulated cu conductor single core cable ( for neutral earthing ), supplying and making end termination with brass compression gland and aluminium lugs for 4x16 sqmm/3.5 x 25 sq.mm /35 sqmm size of pvc insulated and pvc sheathed / xlpe aluminium conductor cable of 1.1 kv grade as required., sitc of switch fuse unit rewireable type 63a 415 volt on wall, connection etc as reqd (make - hpl/ havells- / l&t or similar superior make )-, sitc of 4 pole 63a 415 v on load change over switch with side/front handle operation in sheet steel enclousers on wall, connection etc ( make - hpl/ havells- euro load/ l&t or similar superior make )-, supply & fixing 4 way, single door ,sheet steel, tpn mcb distribution board, 415/240 volts, on surface/recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required. (but without mcb/ rccb/isolator)., supply & fixing of following rating mcbs in the existing mcb db complete with connection, testing & commissioning etc. as required. (i) 5-32 amp sp mcb c series, (b) 4pole63a 415v isolator, tp mcb 25a-- for power plant, painting of lt panel (outer side) with good quality of paint, removing old paint & dust, cleaning, etc etc, earthing with gi pipe 4.5 mtr long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/ coke and salt as reqd (for dg neutral -02 nos, body earth -02 nos, for neutral power supply co -01 no total- 05 nos), providing & fixing of 25mm x 5 mm g.i strip on surface or in recess for connections etc. as reqd.

Ms Arch Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Co-operative

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector