Latest ms flat Tenders | Government ms flat Tenders

Central Government/Public Sector

CTN :39870362

04 Apr, 2025 NA

Kolkata - West Bengal

Tender For tender notice for civil & interior repairing & renovation of flat no. cs ?? 9 / 3 at first floor of block cs-9 at sbi officers' residential quarters at golf green urban complex, kolkata (w.b.)

State Government

CTN :39869501

04 Apr, 2025 1.69 Lacs

Hathras - Uttar Pradesh

Tender For painting of 132 kv equipments and ms flats at 220 kv substation meetai, under etd hathras

Central Government/Public Sector

CTN :39645418

03 Apr, 2025 15.50 Lacs

Chennai - Tamil Nadu

Tender For corrigendum : repair, recanning and restoration of all wooden and steel chairs at md accn and units of bmu, dhq-5 and icgas chennai area under ge (i) (cg) chennai - chair verandah:-, fd-256 ,259,fd/map-ii/06, spot gas welding to broken parts/joints of chairs., removing of existing torn out/unserviceable plastic cane from chair verandah and recanning the chair fully both seat and back with new plastic cane of virgin quality white, half round of size 4mm wide and 0.60 mm thick.complete all as specified and shown on drawing.the canning shall only be done after painting the chair. , removing the old broken shoes of chairs and supply and fixing best quality new pvc shoes to the legs of chair., removing the existing unserviceable/broken pvc seat and back from the chair,supply and fixing new pvc seat and back 4mm thick to the chair verandah map after providing one flat iron of size 20mmx5mm in support of pvc seat at centre between two sides through proper welding .the pvc seat shall got approved from ge before supply.the pvc seat shall be fied only after painting the chair., painting the frame of the chairs by two coats of synthetic enamel white of approved quality paint after prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.the chair frame shall be made smooth by applying metal putty whereever required., chair cb steel with arms:fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces by removing the old paint with sand emery paper. complete all as specified and as directed by engr-in-charge, remvoing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg., removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair cb steel without arms: fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces. complete all as specified and as directed by engr-in-charge, removing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair easy,fd-229,358 :-, removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg., removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg., removing the old unserviceable rail and

Central Government/Public Sector

CTN :39554581

04 Apr, 2025 NA

Nabinagar - Bihar

Tender For corrigendum : supply of 100244393 - 10 - m1735190303 - tee thd-f,ms,is1239- 2,hvy,25mm , 100244393 - 20 - m1755050159 - union male threaded,is1239-2 heavy,15mm , 100244393 - 30 - m1709210303 - bend be,ms,is1239- 2,90d,sr,hvy,wld,25mm , 100244393 - 40 - m1755050201 - union male threaded,is1239-2 heavy,20mm , 100244393 - 50 - m1760220257 - nipple rng,is1239- 2,glv,hvy,15x100mm , 100244393 - 60 - m1760220284 - nipple rng,ms,is1239-2 heavy,galv , 100244393 - 70 - m1754060207 - socket is1239-2 medium,thd-f,20mm , 100244393 - 80 - m1754060155 - socket is1239-2 medium,thd-f,15mm , 100244393 - 90 - m1705061606 - elbow be,is1239-2,90d,sr,wld,mdm,200mm , 100244393 - 100 - m1702186485 - flange asme b16.5,soff,cl150,200mm,rl , 100244393 - 110 - m1702753481 - flange ansi b16.5,sorf,ms,cl150,200mm , 100244393 - 120 - m1705011407 - elbow bw,is1239- 2,90d,sr,wld,hvy,150mm , 100244393 - 130 - m1709211403 - bend be,is1239,90deg,sr,hvy,wld,150mm , 100244393 - 140 - m1705091409 - elbow,thd-f,ms,is1239-2,45deg,150mm , 100244393 - 150 - m1705011452 - elbow be,ms,90d,sr,wld,hvy,150x65mm , 100244393 - 160 - m1765161485 - reducer conc,bw,is1239- 2,hvy,150x100mm , 100244393 - 170 - m1702172448 - flange so,is2062,stl,flat face,150mm , 100244393 - 180 - m1709111258 - bend be,is1239- 2,90deg,sr,mdm,wld,125mm , 100244393 - 190 - m1702652445 - flange ansi b16.5,soff,cs,cl150,150mm , 100244393 - 200 - m1702656429 - flange ansi b16.5,sorf,cs,cl150,125mm , 100244393 - 210 - m1705010802 - elbow bw,is1239- 2,90deg,sr,wld,hvy,80mm , 100244393 - 220 - m1705311000 - elbow be,is1239- 2,90d,sr,wld,mdm,100mm , 100244393 - 230 - m1705111006 - elbow be,is1239- 2,90d,sr,wld,hvy,100mm , 100244393 - 240 - m1705021008 - elbow be,is1239- 2,90d,lr,wld,hvy,100mm , 100244393 - 250 - m1765161078 - reducer conc,is1239- 2,smls,hvy,100x80mm , 100244393 - 260 - m1702352408 - flange ansi b16.5,soff,ms,cl150,100mm , 100244393 - 270 - m1702990066 - flange is6392,sorf,cs,cl1.6,100mm , 100244393 - 280 - m1709210808 - bend be,ms,is1239- 2,90d,sr,hvy,wld,80mm , 100244393 - 290 - m1709510809 - bend be,is1239,90d,sr,mdm,wld,80mm,glv , 100244393 - 300 - m1705060807 - elbow,thd-f,ms,is1239-2,90deg,80mm , 100244393 - 310 - m1702256360 - flange is6392,sorf,cs,cl1.6,80mm , 100244393 - 320 - m1705060700 - elbow be,is1239,90deg,sr,wld,hvy,65mm , 100244393 - 330 - m1735180702 - tee,ms,is1239-2,mdm-b,65mm , 100244393 - 340 - m1754060702 - socket,ms,is1239- 2,galv,thd,65mm , 100244393 - 350 - m1709510605 - bend thrd,ms,is1239-2,90deg,50mm , 100244393 - 360 - m1735180571 - tee red,thd-f,is1239-2,hvy,50x50x25mm , 100244393 - 370 - m1754160648 - socket,ms,is1239- 2,galv,50x25mm , 100244393 - 380 - m1702356303 - flange ansi b16.5,sorf,ms,cl150,50mm , 100244393 - 390 - m1705060506 - elbow be,is1239,90d,sr,wld,hvy,40mm,glv , 100244393 - 400 - m1709510508 - bend thd-f,is1239- 2,90d,sr,hvy,wld,40mm , 100244393 - 410 - m1705680506 - union,ms,is1239,40mm , 100244393 - 420 - m1735180456 - tee red,thdf,ms,hvy,wld,32x32x25mm , 100244393 - 430 - m1705060302 - elbow thd-f,ms,is1239- 2,90d,sr,mdm,25mm , 100244393 - 440 - m1705000308 - elbow be,is1239,90deg,sr,wld,hvy,25mm , 100244393 - 450 - m1735180304 - tee,thd-f,ms,is1239-2,mdm-b,25mm , 100244393 - 460 - m1754060304 - socket ms,is1239- 2,galv,thd-f,25mm,mdm , 100244393 - 470 - m1705160345 - elbow thd-f,is1239- 2,90d,sr,hvy,25x15mm , 100244393 - 480 - m1705560343 - elbow,thd,ci,is1879,mdm-b,25x15mm , 100244393 - 490 - m1765090349 - reducer,conc,thd-f,ms,is1239- 2,25x15mm , 100244393 - 500 - m1702353225 - flange ansi b16.5,sorf,ms,cl150,25mm , 100244393 - 510 - m1705060200 - elbow thdf,ms,90deg,sr,wld,hvy,20mm , 100244393 - 520 - m1735120258 - tee,eq,ms,is1239-2,mdm-b,20mm , 100244393 - 530 - m1735780245 - tee red,is1239- 2,mdm,wld,20x15mm,glv , 100244393 - 540 - m1705680205 - union,ms,is1239,20mm , 100244393 - 550 - m1705060154 - elbow f-thd,is1239- 2,90deg,short,15mm , 100244393 - 560 - m1754080153 - socket,ms,is1239-2,galv,thd-f,15mm , 100244393 - 570 - m17056801

CTN :39856274

07 Apr, 2025 12.02 Lacs

Multi City - Karnataka

Tender For procurement of material for the construction of shg shed in thalihalla gp of chikkamagaluru taluk - boulders shg010, bond stone 20 x 20 x 45 cm shg010, size stone 20 x 20 x 25 cms shg010, binding wire shg010, tmt bars fe 500 shg010, hom of vibrator 0.71 days shg010, plasticizer or super plasticizer shg010, transportaion charge shg010, add sundries charges at 1 percent on material shg010, watering charges at 1 percent on material shg010, mixer (concrete) - 1 cum capacity shg010, portland cement shg010, coarse sand (zone iii) shg010, broken stone aggregate 12 mm to 10 mm size shg010, broken stone aggregate 20 mm size shg010, broken stone aggregate 40 mm size shg010, painter class i shg010, ready mix primer paint (ready mix red lead paint) shg010, add hom of welding and grinding machine 4 percent on material shg010, welder grade i shg010, fitter class i shg010, ms flat shg010, m.s rods shg010, honnewood planks for panels 20 mm thick shg010, honne wood shg010, hom of machinaries for planing shg010, cutting and other wastage 5 percent shg010, mathi/nandi wood planks for panels 25 mm thick shg010, vitrified tiles 600x600 mm shg010, add providing and removing scaffolding at 3percent on labour shg010, add handling , loading and unloading at 1percent on material shg010, brick shg010, jungle wood runners and planks shg010, casurina poles 75 - 100 mm dia shg010, add sundries charges at 2 percent on materialshg010, handling , loading and unloading at 2 percent on material shg010, silver oak or equivalent planks 38 mm thick shg010, stone chistler class ii shg010, mason class ii (with tools)shg010, mason class i (with tools) shg010, mixer (concrete small used in culvert) shg010, electrification shg010, name board shg010, polyenthylene water storage tank of specified capacity l shg010, add brush, putty, sand paper, roller at 5 percent on cost of paint shg010, enamel paint shg010, add brush, putty, glue at 5 percent on cost of paint shg010, whiteningshg010, dry distemper shg010, fabricatorshg010, chrominum plated screws shg010, cleat angles shg010, alluminium handles - 15 mm shg010, alluminium tower bolt - 20 cm shg010, pvc edge beading shg010, rubber beading for shutters beading shg010, nylon rollers shg010, aluminium window frame section 1.20 mm thick shg010, enamel metal paint shg010, stone aggregate(single size of 10 mm nominal size shg010, stone aggregate(single size of 20 mm nominal size shg010, add hom of welding and grinding machine at 2 percent on material shg010, glass of 5.50 mm thick plain shg010, casurina pole

CTN :39856337

19 Apr, 2025 11.03 Lacs

Koppa - Karnataka

Tender For supply of materials of construction of sanjivini shed, bhandigadi gp, koppa taluk, chikkamagaluru district - broken stone aggregate 40 mm size(bha), broken stone aggregate 20 mm size(bha), broken stone aggregate 12 mm to 10 mm size(bha), coarse sand (zone iii)(bha), portland cement(bha), mixer (concrete) - 1 cum capacity(bha), add watering charges at 1 % on material(bha), add sundries charges at 1 % on material(bha), transportation/loading and unloading of material/lifting of material /wastage/unforeseen charges/miscellaneous which are necessary during execution.(bha), plasticizer / super plasticizer(bha), hom of vibrator 0.71 days(bha), formwork, centering & scaffolding for beams & lintels of building - 20%(bha), water(bha), mason class i (with tools)(bha), mixer (concrete small used in culvert)(bha), generator 33 kva(bha), water tanker(bha), tmt bars fe 500(bha), binding wire(bha), size stone 20 x 20 x 25 cms(bha), bond stone 20 x 20 x 45 cm(bha), boulders(bha), mason class ii (with tools)(bha), stone chistler class ii(bha), add sundries charges at 1 % on labour(bha), add watering charges at 1 % on labour(bha), silver oak or equivalent planks 38 mm thick(bha), casurina poles 100 - 150 mm(bha), casurina poles 75 - 100 mm dia(bha), add handling , loading and unloading at 2% on material(bha), add sundries charges at 2 % on material(bha), jungle wood runners and planks(bha), brick(bha), add handling , loading and unloading at 1% on material(bha), add providing and removing scaffolding at 3% on labour(bha), vitrified tiles 600x600 mm(bha), mathi/nandi wood planks for panels 25 mm thick(bha), add cutting and other wastage 5%(bha), hom of machinaries for planing(bha), honne wood(bha), honnewood planks for panels 20 mm thick(bha), m.s rods(bha), ms flat(bha), fitter class i(bha), welder grade i(bha), add hom of welding and grinding machine at 4% on material(bha), ready mix primer paint (ready mix red lead paint)(bha), add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint(bha), painter class i(bha), enamel metal paint(bha), add brush at 1% on cost of paint(bha), aluminium window frame section 1.20 mm thick(bha), nylon rollers(bha), rubber beading for shutters beading(bha), pvc edge beading(bha), alluminium tower bolt - 20 cm(bha), alluminium handles - 15 mm(bha), cleat angles(bha), chrominum plated screws(bha), thick plain glass 5.50 mm (bha), fabricator(bha), add hom of welding and grinding machine at 2% on material(bha), ceramic tiles 30 x 30 cms(bha), white cement(bha), dry distemper(bha), whitening(bha), add brush, putty, glue at 5% on cost of paint(bha), enamel paint(bha), add brush, putty, sand paper, roller at 5% on cost of paint(bha), formwork, centering & scaffolding for plastering & painting of ceiling - 25%(bha), white vitreous china clay flat back wash basin size 550x400mm(bha), copper plated brass piller tap 15mm(bha), cp brass chain with plug(bha), cp brass waste 32 mm of standard pattern(bha), brass stop cock(bha), c.i. / m.s. brackets for flushing cistern(bha), lead or pvc connection pipe 32mm dia (for wash basin)(bha), licenced plumber with tools(bha), add white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material(bha), stone aggregate(single size) 20 mm nominal size(bha), stone aggregate(single size) 10 mm nominal size(bha), pvc pipe of 4kg/cum,75 mm(bha), unit cost as per the specification(bha), ms pipes of 80 mm to 100 mm dia(bha), rms gusset plate(bha), corbon electrodes(bha), hom of welding and grinding machine(bha), add(bha), mechanic class ii/mechanic hmp grade i/eme grade(bha), hom of cutting and grinding machine(bha), tools and plants at2% on material(bha), stainless steel hollow pipes 16 gauge 50 mm dia(bha), stainless steel hollow pipe 25 mm dia(bha), thick m.s plate 5inches dia 5mm (bha), gi coated expansion bolts(bha), weilding rods(bha)

CTN :39846761

07 Apr, 2025 NA

Kanchipuram - Tamil Nadu

Tender For supply of aircraft windshield cleaning trestle fabricated materials - ms rectangle tube , 3mm thick 6m long ms square tube , ms square tube 2mm thick 6m , ms square tube 1 , ms flat 6 m long , ms flat 6 mm thick , 10 mm ms flat , ms flat 2 12 mm thick , pop rivet , self lock bolt , buffer , 3 feet buffer , rubber castor wheel assy , rubber wheel assy with heavy duty bracket

Central Government / Public Sector

CTN :39860387

02 Apr, 2025 NA

Vijayawada - Andhra Pradesh

Tender For set of items required for provision of additional/ official seat fixing in 3 phase locomotives co nsisting of 05 items as follows. 1) c- channel size: 100 x 50 x 6mm & each channel length = 20 feets. qty/s et. = 09 nos. 2) equal l- angle size: 50 x 50 x 6mm & each l-angle length = 20 feets. qty/set. = 09 nos. 3) ms flat size: 5 x 25mm & each ms flat length = 20 feets. qty/set. = 27 nos. 4) equal l- angle size: 40 x 40 x 4mm & each l-angle length = 20 feets. qty/set. = 14 nos. 5) hex head bolt full threaded size: m14 x 55 mm, grade: 8.8 as per is: 1364(part-2) along with suitable one m14 nut, grade: 8.0 as per is: 1364(part-3), two flat washers as per is: 2016 and one spring washer as per is: 3063. makes: tvs/lps/unbrako/bmi/dfl. qty/set. = 1200 sets. note: one sample of each item should be got approved before effecting bulk supply. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :39671341

02 Apr, 2025 NA

Jharsuguda - Odisha

Tender For corrigendum : supply of ms pipe 100 mm dia , 80 nb erw pipe , 65 mm erw pipe heavy be is 1239 , 40 mm erw pipe heavy be is 1239 , gi pipe 40 nb medium is 1239 erw , gi pipe 50 nb erw pipe 1239 part i , gi pipe 65 nb medium erw is 1239 part i , 90 ms bend 250mm dia , 90 ms bend 200 nb , 90 ms bend 150mm dia , 90 ms bend 100mm dia , 90 ms bend 80mm dia , 90 ms bend 65 nb , gi 90 deg bend 80 nb , 65nb 90degree bend , bend 50 nb , bend 40 nb , bend 25 nb , bend 20 nb 90 degree plain end , bend 15 nb , tee fitting 80 nb plain end , tee fitting 65 nb , tee fitting 50 nb , tee fitting 40 nb , tee fitting 25 nb , tee fitting 20 nb , tee fitting 15 nb , socket 80 nb , socket 65 nb , socket 50 nb , socket 40 nb , pipe union 65 nb , pipe union 50 nb , pipe union 40 nb , hand rail , toe guard , isa 75 x 75 x6 , isa 50x50x6 , isa 80x80x6 mm , isa 90x90x6 mm , isa 130x130x10 mm , isa 100x100x10 mm , ismc 100x 50 mm , ismc 150 , ismc 200 x76 mm , ismb 250x125 , ismb 300 x 140 mm , ismb 125 , ismb 200x100 mm , m s plate 5 mm thick , ms plate 8 mm , plate m s 16 mm , ms plate 2mm 2 5mtr length 1 25mtr width , duct bracing pipe od 48 3 x thk 3 2 mm , duct bracing pipe od 88 9 x thk 5 49 mm , duct bracing pipe od 113 9 x thk 3 6 mm , duct bracing pipe od 114 3 xthk 6 02 mm , duct bracing pipe od 127 x thk 8 mm , duct bracing pipe od 140 8 x thk 4 8 mm , duct bracing pipe od 168 5 xthk 7 11 mm , duct bracing pipe od 219 4 x thk 4 mm , ms flat 50mmx12mm thick , ms flat 60mmx12mm thick , chequred plate 6 mm bid number/ & ( * ) : gem/2025/b/6008350 dated/ + : 12-03-2025 bid document/ 3 3 1 / 41

Central Government/Public Sector

CTN :39847155

07 Apr, 2025 5.60 Lacs

Chandigarh - Chandigarh

Tender For providing of custom bid for services - work of fabrication and erection of pontoon frames along with fitting of ms barrels with departmentally provided ms angle, ms flat, ismb, ms barrels at bhatadi ocm, chandrapur area, wcl

Ms Flat Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

State Government

Central Government/Public Sector