Latest ms flats Tenders | Government ms flats Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

State Government

CTN :38564131

30 Dec, 2024 NA

Chhindwara - Madhya Pradesh

Tender For building material - store material, cement (is) (rate 50 kg per bag) 43 grade 53 grade ordinary portland cement (opc) ppc-portland pozzolana cement, (is) thermo mechanically treated bars (tmt) mild steel rod (rate per kg) required in 8mm, 10mm, 12mm dia, sand (white sand) (rate per cubic metre) excluding void is: 1542 is: 2166 for using it in construction works, aggregate (rate per cubic metre) excluding void 20 mm nominal size graded stone aggregate 20 mm nominal size graded stone aggregate, hard moorum (rate per cubic metre) excluding void hard muram having cbr> 12%, stone dust (rate per cubic metre) excluding void crusher stone dust, brick (rate per thousand numbers)size (190*90*90 mm) well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process crushing strength not less than 40 kg/cm to and water absorption not more than 15% , floor tiles (rate per square feet)size 300x300 mm ceramic glazed tiles istiles thickness 6 to 7 mm, wall tiles (rate per square feet)size 300x450 mm ceramic glazed tiles istiles thickness 6 to 7 mm, western commode (rate per each)size 360mmx475mmx395mm anti-germ fluoro-polymer coated water closet european type w. c. pan size 360x475x395 mm with solid poly propelyne made soft closing seat cover., wash basin (rate per each)size- 570mm x 470mm x 190mm all fittings and fixtures, door frame (rate per kg)size 100mm x 50mm x1.6mm profile c of 1.6 mm thick single rebate is 4351 manufactured from commercial mild steel sheet, flush door (rate per metre)size- 1800 mm x 850 mm x 35 mm is marked flush door shutters is: 2202 (part 1) decorative type, core of block board construction with frame 1st class hard wood and well matched teak 3 ply veneering with vertical or cross bands and face veneers on both faces of shutter, gi pipe size- 32 mm dia (rate per meter) is mark g.i. riser pipe as per i.s. 1239 minimum thickness 3.2 mm, gi pipe (rate per metre)size 65 mm dia galvanized iron (ms) pipes is-1239 nominal bore in 65 mm minimum thickness in 3.6 mm, hdpe pipe (rate per metre) size- 50 mm dia hdpe 100is 4984/ 14151/ 12786/ 13488 minimum thickness 3.6 mm, wire (rate per running meter) size- 4.0 sq.mm multi strand submersible flat cable is marked 3 core copper wire, water storage tank pe capacity 500, 1000, 10000 ltr. (rate per nos), socket (rate per nos) size 66 mm dia galvanized iron (ms), elbow (rate per nos) size 66 mm dia galvanized iron (ms), pvc pipe (rate per metre) the oriented un-plasticized polyvinyl chloride pvc-o pipes for potable water supply as per is: 16647-2017 duly inspected and tested and having bis certification mark size (20 mm) dia minimum thickness 2.87 mm size 1 (25 mm) dia minimum thickness 3.38 mm size 1 (40 mm) dia minimum thickness 3.68 mm

Central Government / Public Sector

CTN :38569959

30 Dec, 2024 NA

Kazipet - Telangana

Tender For supply of spring washer as per clw spec: clw/ms/3/085 alt-8, single coil, flat ends size m16, typ e b . [ warranty period: 30 months after the date of delivery ]

CTN :38554786

02 Jan, 2025 NA

Bangalore - Karnataka

Tender For supply of steel tube 25mm od x 1 5mm thk is 3074 cds 1 or 2 , steel round bar 16mm dia is 5517 93 gde 40 ni6 crmo3 , steel round bar 6mm dia is 1570 gde c20 , steel flat 45mm width x 6mm thk is 2062 69 gde c20 , steel angel 35x35x5mm thk is 808 , steel snap hook procured through ex trade as per drg no a3 515 drg 52272 , steel chain link galvanised n10 4 dia 3x76 l 10 301 607 procured through ex trade as per drg no a4 515 drg 52270 , steel coupling link 19 5 3mm dia procured through ex trade as per drg no a4 515 drg 52271 n10 9001 3 , steel link head procured through ex trade as per drg no a4 515 drg 52286 , steel nut hexagon 13mm a f m8 6h procured through ex trade as per drg no a4 515 drg 52288 , steel hexagon 13mm a f m8 h ny lock nut procured through ex trade as per drg no a4 515 drg 52289 , ms welding electrodes 2mm dia x 350mm long , paint primer red oxide , paint enamel og , thinner , self adhesive packing tape brown 2inch , aluminium sheet 3mm thk x 900 x 1800mm is 737 gde 54300 , aluminium sheet 1 25mm thk x 900 x 750mm is 737 gde 54300 , aluminium tube 25mm od x 2mm thk x 3 6mtr length 738 gde nts condition 1 by 2 , single layer nylon impreghated rubber sheet 4mm thk x 130mm width x 1750mm length shore a 66 by 75 , steel hammer drive screw type u dia 1 5 x 6mm long , aluminium rivets csk head dia 4 x 15mm long , aluminium rivet csk head dia 4 x 10mm long , aluminium filler rod dia 2 5mm x 1000 mm long , aluminium primer , paint enamel white , thinner sheenlac , wonder tape brown 3inch bid number/ ( ( ) ): gem/2024/b/5586517 dated/* : 12-12-2024 bid document/ 1 1 / 25

CTN :37735600

18 Dec, 2024 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras supply of piping steel medium 20mm bore x 2.65mm thk-n4710- 000028 , steel bar mild black round dia 25mm length 4.5 to 5mtrs-n9510-000026 , stainless steel plate 2000x1000x2mm-n9515-000262 , ms angle 1" x1" x3/16" (25x25x5mm) -n9520-000003 , steel angle mild 40x 40 x3 mm-n9520-000006 , steel sheets mild black 2500x1200x2mm- n9515-000438 , ms bar black rd in 4.5 to 5 mtrs length dia 12mm-n9510-000022 , steel sheet stainless 2500x1000x1.25mm-n9515-000260 , angles equal ms 40 x 40 x 5 mm-n9520-000007 , steel bar mild flat 40mmx 6mm-n9510-000058 , piping steel medium galvanised bore 50mmx3.65mm- thk n4710- 000031 , ss plate 2500x1000x0.90mm-n9515-000259 , ms bar black rd length 4.5 to 5 mtrs dia 8mm-n9510- 000019 , angle equal ms 75 x 75 x 8 mm-n9520-000081 , steel angle equal ms 50x 50 x 6mm-n9520-000012 , piping, steel, seamless, inside coated with water repellent oil-n4710-000419 , piping steel medium 32mm bore 32 x 3.25mm thk-n4710-000030 , piping steel medium nominal 25mm bore x 3.25mm thk n4710-000029 , staple 200mmx3lbx40z* clamp per dozen, iron, round-n5315-000876 , sheet steel mild gal 2500x900x0-80mm-n9515-000489 , steel angle equal ms 75mmx75mmx6mm-n9520-000018 , piping steel nominal heavy 40mm bore x 4.05mm thk-n4710- 000019 , ms bar black rd dia 10 mm length 4.5 to 5 mtrs-n9510-000020

CTN :38518874

31 Dec, 2024 NA

Kangra - Himachal Pradesh

Tender For supply of lv7 itr beml 50-224-13 mud flap rh lot 2 to 4 , lv7 itr beml 5310-005013 washer flat steel od 170 x id 60 x 20thk , lv7 itr beml 50-243 gimbal pin l-272 lot 3 and 4 , lv7 itr beml 3110-003551 coller bearing od 146 x id 198 x thk 18 , lv7 itr beml 3120-000380 50-312 bush lot 1 to 5 , lv7 itr beml 50-213-41 steel wire rope 6mm dia 4700 long , lv7 itr beml 5310-004988 nut eye bolt a f 80 dia 55 8 tpt , lv7 itr beml 3120-000671 bushing sleeve ms od 125 x id 83 x thk , lv7 itr beml 5306-004715 centre pivot bolt forging 373 mm long , lv7 itr beml 4730-001157 bolt fluid assy 178 mm long 53 a f , lv7 itr beml 5340-003293 fork end , lv7 itr beml 3120-000377 bushing sleeve steel ht od 58 x id 50 , lv7 itr beml 3120-000674 bushing sleeve steel od 158 xid100 x 50 , lv7 itr beml 50-152 alt-4 thrust pad , lv7 itr beml 3120-000676 50-119-2 washer thrust bronze od146xid99xthk6 , lv7 itr beml 50-290 winching roller lot 3 and 4 , lv7 itr beml 50-641 cap assy lot 2 to 4 , lv7 itr beml 50-66-79 hex bolt m 12 x 30 is 1364 s4 6 , lv7 itr beml 50-17-31 hexagonal screw m12 x 30 , lv7 itr beml 9905-000283 red reflex reflector 80 mm is 3105-80 , lv7 itr beml 50-223-91 indicator light holder 24v 21w bulb , lv7 itr beml 4730-000927 nut union pipe 38 m-911030 , lv7 itr beml 5315-049794 pin cotter split , lv7 itr beml 5315- 049798 pin cotter split , lv7 itr beml 50-64-18 spring washer m14 b lot 1 , lv7 itr beml 50-223-1 cable 15 mtr 15 0.3 1.5mm 12 core

CTN :38557798

01 Jan, 2025 NA

Jalandhar - Punjab

Tender For supply of lt wire 4mm , insulation tape elect pvc , sealing compound , liquid cleaner fo automobiles , rust cleaner , m seal , feviquick , adhesive synthetic , plat patti , gi pipe , ms sheet , ms flat

CTN :38329012

18 Dec, 2024 NA

East Sikkim - Sikkim

Tender For bid to ras tender for supply of shovel round nose with handle 2.3 kgs excluding handle weight , spade with handle 1.8 kgs excluding handle weight , crowbar tempered 1650 mm long with across , wheel barrow steel double wheel , wheel barrow steel single wheel , measuring tape metalic 5 mtr long , measuring tape metalic 15 mtr long , axes felling 2kg with handle , hack saw frame fixed with blade size 12 inch , duoble faced sledge hammer fully hardened and tempered 1 kg weight , duoble faced sledge hammer fully hardened and tempered 2 kg weight , duoble faced sledge hammer fully hardened and tempered 3 kg weight , duoble faced sledge hammer fully hardened and tempered 3.5 kg weight , duoble faced sledge hammer fully hardened and tempered 5 kg weight , spirit level 12 inch steel body , spirit level 24 inch steel body , electric line tester , soldering wire , gloves for insulation electrician , flat chisel 0.5 inch , flat chisel 2 inch , round chisel 0.5 inch , round chisel 1.5 inch , half round chisel 0.5 inch , half round chisel 1.5 inch , mortise chisel 0.5 inch , mortise chisel 0.75 inch , carpenter try square 8 inch , carpenter try square 15 inch , file triangular 6 inch , plum bob 8 ozs , mason trowel 4 inch steel with handle , pan mortar standard , hack saw blade size 12 inch , multimeter digital standard , mason square 24 inch x 12 inch , racker 12 prong ms 12 inch long with wooden handle , soldering iron , earth rammer with handle , bitumen pouring cane 10 ltr cap , cube mould , tile cutting machine , ring spanner set of 12 pcs (6x7 to 30x32) , de spanner set of 12 pcs (6x7 to 30x32) , hammers ball pin , cutting pliers , adjustable spanner , empty tool box , nose plier , flat plier , screw driver , mini hacksaw , mini hammer 200 gm , soldering paste , hacksaw 18 inch , claw hammer 200 gms , mason hammer , flat file , half round file , round file , wood drill machine , wood drill bit set , heavy duty drill machine for concrete , heavy duty drill machine bit set , jack planner 12 inch , jack planner 18 inch , jack planner 24 inch , smooth wood planner 6 inch , t bar clamp 6 inch , electric wood planer , hand drill machine with bit , carpenter stone , wood cutter machine with blade , electric grinder , exhaust fan 12 inch , cgi sheet 10 feet x 3 feet , aerial route recee equipment , almirah steel large 78 inch x 36 inch x 19 inch , almirah steel small 50 inch x 30 inch x 18 inch , mattress 6 feet 6 inch x 3 feet 6 inch , revolving office chair , office table , charpoy bed with ply top 6 feet 6 inch x 3 feet 6 inch , hume pipe 1200 mm dia x 2.5 mtr long of np3 standard , water geyser 15 ltrs cap , cgi sheet 10 feet x 4 feet (pre painted) , j hook with nut and bitumen washer , pbs roll (tar felt) having 3 feet width and 20 mtrs length in each roll , linoleum sheet , curtain 7 feet long , door mat , steel rod for curtains , ceiling light white , ceiling light yellow , heavy duty plastic wheeled dust bin 60 ltrs cap , steel hot case , lpg stove double burner , kerosene bhatti with electric motor , kerosene stove burner (4 no) , iron tawa big size for ors mess , degchi/patila 24 inch with lid , degchi/patila 22 inch with lid , degchi/patila 20 inch with lid , degchi/patila 18 inch with lid , degchi/patila 16 inch with lid , degchi/patila 12 inch with lid , rubber pipe/flexible pipe 1inch dia for water supply , rubber pipe/flexible pipe 1.5 inch dia for water supply , parat aluminium 24 inch , steel plate , steel glass , katori bowl , tea spoon , service spoon small for cooking , service spoon medium for cooking , service spoon large for cooking , iron palta , kadai iron 30 inch , kadai iron 24 inch , kadai iron 18 inch , kadai iron 15 inch , pressure cooker 20 ltr , pressure cooker 10 ltr , pressure cooker 5 ltr , pressure cooker 3 ltr , steel bucket , steel jug , gas stove with regulator , pipe and lighter , gas bhatti , idli maker , mixer grinder heavy duty , dinner set (bone china) , dosa tawa , frystrainer small , frystrainer l

CTN :38560511

28 Dec, 2024 10.64 Lacs

Mudigere - Karnataka

Tender For supplying of materials for sajivini shed in agrahara lakshmi pura grama gonibidu gp - qnt50 mm thick plain glass, ser1 licenced plumber with tools ser1, ser1 mixer concrete 1 cum capacity ser1, ser1 mixer concrete small used in culvert ser1, ser1 hom of welding and grinding machine ser1, ser2 hom of vibrator 0 71 days ser2, ser1 hom of cutting and grinding machine ser1, ser1 mason class i with tools ser1, ser1 mason class ii with tools ser1, ser1 painter class i ser1, ser1 stone chistler class ii ser1, ser1 labour charges for handing errection of rcc rings etc ser1, ser2 transportation charges of materials beyond 5 km10 ser2, ser2 tools & plants and electrical charges 2 ser2, ser2 add watering charges at 2 on material ser2, ser1 add watering charges at 1 on material ser1, ser1 add sundries charges at 2 on material ser1, ser1 add sundries charges at 1 on material ser1, ser1 add providing and removing scaffolding at 3 on labour ser1, ser2 add hom of welding and grinding machine 4 on material ser2, ser2 add hom of welding and grinding machine 2 on material ser2, ser2 add handling loading and unloading at 2 on material ser2, ser2 add handling loading and unloading at 1 on material ser2, ser1 add cutting and other wastage 5 ser1, ser2 add brush putty sand paper roller at 5 on cost of paint ser2, ser1 welder grade i ser1, ser1 fitter class i ser1, ser1 fabricator ser1, ser1 handling loading and unloading 3 on material ser1, ser1 labour charges for lifting and placing in position and making connection at 7 on material ser1, pvc pipe of 4kgs cum 63mm qnt, fabrication charges qnt , cost of 6 5mm m s coil qnt, indian type water closet of size 580 mm of specified make with footrests qnt, white vitreous china clay flat back wash basin size 630x450mm qnt, vitrified tiles 600x600 mm qnt, ms angle iron 50mm x 50mm x 6mm 33 8 metre in length at 4.5 kgs per metre qnt, ms angle iron 40mm x 40mm x 6mm 23 metre in length at 3 5 kgs per metre qnt, gusset plates 6 mm thick qnt, copper plated brass piller tap qnt5mm qnt, brick bats 25 to qnt00 mm qntqnt, base plate base plate qnt, anchor bolts 750mm qnt, rcc cap qnt000 mm diaqnt00 mm thick qnt, bolts and nuts qnt, ms flat qnt, unit cost as per the specification qnt, brick bats 25 to qnt00 mm qnt, c i m s brackets for flushing cistern qnt, mr9609 add qnt, whitening qnt, tmt bars fe 500 qnt, size stone 20 x 20 x 25 cms qnt, silver oak or equivalent planks 38 mm thick qnt, rubber beading for shutters beading qnt, ready mix primer paint ready mix red lead paint qnt, nylon rollers qnt, mathi nandi wood planks for panels 25 mm thick qnt, mangalore tiles first class and special tile for ridges and hips qnt, lead or pvc connection pipe 32mm dia for wash basin qnt, jungle wood runners and planks qnt, honnewood planks for panels 20 mm thick qnt, honne wood qnt, granite trap broken metal qnt00 mm and down size qnt, granite metal 40 mm qnt, granite metal 20 mm qnt, enamel metal paint qnt, corbon electrodes qnt, cleat angles qnt, chrominum plated screws qnt, ceramic tiles of size qnt 30 x 30 cms, casurina poles 75 qnt00mm dia, casurina poles qnt00 qnt50mm qnt, cp brass waste 32 mm of standard pattern qnt, cp brass chain with plug qnt, burnt bricks class 35 qnt, broken stone aggregate 40 mm size qnt, broken stone aggregate 20 mm size qnt, broken stone aggregate qnt2 mm to qnt0 mm size qnt, brass stop cock qnt, boulders qnt, bond stone 20 x 20 x 45 cm qnt, aluminium window frame section qnt 20 mm thick qnt, alluminium tower bolt 20 cm qnt, alluminium handles qnt5 mm qnt, glazed tiles 300x450 qnt, polyenthylene water storage tank of specified capacity l qnt, m s rods qnt, border tiles 30 x qnt0 cms qnt, table moulded bricks of class designation 50 qnt, c i manhole cover with frame qnt, binding wire qnt, plasticizer super plasticizer qnt, display board qnt, pvc edge beadingqnt, water proofing materialsqnt, coarse sandqnt, plastic emulsion paintqnt, dry distemperqnt, portland cementqnt

CTN :38199042

20 Dec, 2024 10.00 Lacs

Siang - Arunachal Pradesh

Tender For corrigendum : supply of fabrication - angle iron 35 mm by 25 mm by 5 mm , angle iron 50 mm by 50 mm by 6 mm , ms flat 25 mm by 3 mm , ms flat 25 mm by 4 mm , ms flat 40 mm by 6 mm , hose pipe high pressurebfor car washing plant with nozzle pipe length 20 mtr , plastic pipe flexible 12 mm id 16 mm od , araldite 36 gram tube , m seal 100 gram , spring washer 10 mm id , spring washer 11 mm id , spring washer 12 mm id , spring washer 13 mm id , spring washer 14 mm id , hose clamp 15 mm size , hose clamp 25 mm size , hose clamp 50 mm size , hose clamp 75 mm size , hose clamp 100 mm size , copper benjo washer 12 mm pkt of 100 nos , benjo washer inner dia 17 mm pkt of 100 nos , benjo washer inner dia 10 mm pkt of 100 nos , benjo washer inner dia 19 mm pkt of 100 nos , benjo washer inner dia 14 mm pkt of 100 nos , plain washer 10 mm size , plain washer 12 mm size , plain washer 14 mm size , plain washer 16 mm size , plain washer 18 mm size , plain washer 20 mm size , soap yellow , rope manila size 1 inch for recover veh , number punch 0 to 9 size 5 by 16 inch , letter punch a to z size 5 by 16 inch , fog light with complete fittings for lt vehs , rear oblique side view mirror with complete fittings for lt vehs , belt fastener nut and bolt type , cotton waste superior quality , rear oblique side view mirror with complete fittings for all model vehicles , horn 12 v for maruti gypsy , nut with bold 22 mm head length of inch , nut with bold 20 mm head length of 04 inch , nut with bold 18 mm head length of 03 inch , nut with bold 16 mm head length of 03 inch , nut with bold 14 mm head length of 03 inch , nut with bold 12 mm head length of 21 by 2 inch , nut with bold 11 mm head length of 2 1 by 2 inch , die and tap 10 into 1 mm pitch , die and tap 10 into 1pt25 mm pitch , die and tap 10 into 1pt5 mm pitch , die and tap 16 into 1pt5 mm pitch , die and tap 16 into 2 mm pitch , die and tap 6 into 1 mm pitch , die and tap 8 into 1pt25 mm pitch , die and tap 18 into 2 mm pitch , die and tap 18 into 1pt5 mm pitch , die and tap 20 into 2pt5 mm pitch , die and tap 22 into 1pt5 mm pitch , die and tap 22 into 2pt5 mm pitch , die and tap 24 into 1pt5 mm pitch , brass rod 1 inch dia , hex rod , buffing wheel size 150 mm cotton whell , buffing shop bar , drill bit 1 mm , drill bit 10 mm , drill bit 12 mm , drill bit 12pt5 mm , drill bit 13pt5 mm , drill bit 14 mm , drill bit 14pt5 mm , drill bit 15 mm

Ms Flats Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government / Public Sector