Web Analytics Made Easy - StatCounter

Ms Pad Tenders

Get complete information related to latest Ms Pad Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Ms Pad Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Ms Pad Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :38005126 Due date: 18 Nov, 202418 Nov, 2024 45.72 Lacs
Tender For corrigendum : provn of 02 in nos bore wells alongwith associated items at icgs mundra - material and labour for drilling of 02 nos pilot/trial bore by direct rotary rig method including all t&p through any kind of starta (soil, kankar, boulder or soft or hard rock) down up to 150 m depth below ground level by using suitable drill bit according to levering of casing pipe including the cost of mud pit, channels, etc and disposal of soil obtained to a distance not exc. 1 km away complete all as specified. note:- (i) the drilling shall be continued up to specified depth and in case sticky clay occurs in between the drilling must be stopped and hydrologist of gws & sb shall be contacted & eggr-in-charge shall be informed.(ii)cost of this consultant shall be borne by contractor (iii) taking the samples from the bore well cutting for every 3 meter interval and every change in strata if less than 3meter. (iv) preparation of litho logs based on these samples.(v) drill time log to be prepared and prescribed., (vi) aquifer performance tests at constant discharge with draw down and recovery reading.(vii) after completion of pilot bore, the contractor shall have to arrange for electro eater logging test of each bore.(viii) contractor have also produced bore well water test report for drinking water parameters before levering of motor and pump.(note:- if water quality not found fit for domestic purpose use then all other connected items of trial bore will not be executed.) , supply assembling, jointing, lowering and fixing in the bore hole pvc casing pipe of nominal dia 315 mm (medium well) ,10 kg/cm2 working pressure, confirming to is 4985-2000 including providing pea gravel of 8 mm to 4.6mm size for packing around the casing/slotted pipe in bore well all as specified and directed. make: astral/ashirwad/ajay/sfmc, all as per item no 2.00 above but slotted pipe. , supply, assembling, jointing, lowering lead free pvc column pipes of nominal dia 65 mm, od 75 mm (min), non toxic, pressure 16 kg/cm2 with and including top and bottom adaptor (ss) and accessories like epdm ring and double ss stud all as spd and directed by engineer-in-charge. make: astral/ashirwad/ajay/sfmc, development of tube well with compressed air by means of air compressor of suitable capacity not less than 300 cfm and over pumping using suitable capacity pump to make available water free from turbidity complete all as specified and directed by engineer-in-charge., m & l for conducting yield test for the bore well by continuously pumping for 24 hours by using a submersible pump set to determine safe pumping yield and produced water test report of samples which is collect every hour complete as directed by the engineer-in-charge. [ all arrangements for yield test shall be made by contractor and cost for the same borne by contractor ], supply and fix ms reducer, bail plug, top cover made of 3mm thick ms plate for bore well in two half sections having a hole of 75 mm bore in centre to accommodate pvc pipe and submersible cable suitable for fixing to the pvc casing pipe top, electric logging and simple strata box including provision of 2 sets of ms clamps made of 50x6mm ms flat including nuts, bolts, etc. including one coat of epoxy primer and two coats of epoxy paint wherever necessary complete all as specified and directed by engineer-in-charge., supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, water lubricate, 3 phase, 10.0hp (appx) 415 volts, 50 hz with suitable submersible electric motor suitable for discharge of 2 liters per second against total head of 125m in the bore complete all as specified and directed by the engineer-in-charge. [ note : column pipe, submersible cable and control gear will be measured and paid separately]. [make: kirloskar / crompton / ksb], supply, install, test and commissioning of submersible pump stainless steel body electric driven with submersible motor, wa

Central Government/Public Sector

CTN :37669426 Due date: 18 Nov, 202418 Nov, 2024 NA
Tender For bid to ras supply of electric items - ms wire , ft switch , ft socket , ss combined , capacitor , pendent holder , modula switch , modula socket , modula regulator , modula dt regulator , ft regulator , 3pin plug , pvc board

State Government

CTN :37967988 Due date: 22 Nov, 202422 Nov, 2024 5.37 Lacs
Tender For corrigendum : supply of miscellaneous t and p hardware and consumable fitting fixtures etc. for corrective maintenance to jmrc - non-nbsr items, wireless drill machine make: bosch model gsb 180-li or advance/updated version, 50m extension wire with board, 40mm ball valve (brass), 50mm ball valve (brass), 0.5 inch ball valve (brass), 65mm nrv valve (double disc), 50mm nrv valve (double disc), 100mm nrv valve (double disc), 80mm nrv valve (double disc), 150mm nrv valve (double disc), 80mm butterfly valve, 100mm butterfly valve, 150mm butterfly valve, hand tool kit (screw driver set, plier, adjustable wrench,etc) make:taparia, model 1005 or higher, grinder make: bosch model gws 600 or higher, syphon pipe for pressure gauge, grinding blade, ss patch fitting glass bracket for 12mm thick glass ( 2" x 2"), anchor bolt fastenr m10 of 4inch, anchor bolt fastenr m10 of 6inch, arildite 90 gm, t- handle with gotti socket (17mm), wd-40 cleaner (400 ml), paint remover, allen key set, black bitumenous paint, gotti set (upto 24mm), square box gotti (17mm) with long extension upto 600mm, wire brush (fixed in drill machine), electric tester, screw driver (long flat), insulated tape (black) packet, plastic board (single plug & double plug), dustbin polythene (garbage bags) medium size, t-spanner (13mm) 30cm in length, ring spanner (24mm - 27mm), self tapping screw 3/4", self tapping screw 1", screw gitti (50 mm), screw gitti (38 mm), screw gitti (32 mm), ms hose clamp for pipe 1/2", ms hose clamp for pipe 2", ms hose clamp for pipe 2.5", iron cutting blade 4", teflon tape, screw bit 3", double sided tape 1" (05 m), steel l patti 3", steel l patti 2", fastners 6mm, fastners 8mm, fatners 10mm, araldite (9gm), m-seal (100 gm), fevi kwik (20ml), round wire clip, wire clip 10mm, steel handles 4", tower bolt 6", steel handles 6", steel hinge 6, steel hinge 4, l-drop 12 " with all fitting bolts, stone cutting blade 4", wooden cutting blade 4", wooden scrapping blade 4", cpvc solvent (20 ml), pvc solvent (20 ml), pvc end plug 1/2", ball valve (32 mm)-brass, ball valve (1")-brass, ball valve (.75")-brass, oil can, pipe wrinch ( 14 ")make: taparia, slide wrinch make: taparia, allen key and screw driver bit set with ratchet handle, long screw driver (flat tip) 18", a- type stairs (aluminium)(08 ft.), extension board (15 m) with 02 sockets, black screw (1.5 "), black screw (1 "), aluminium handle (5 "), syhon washer (sample provided), thread (for gi fittings), holdtight (200 gm), kiwi drain cleaner (50 gm), solenoid valve (32 mm) make: danfoss, solenoid valve (50 mm)make: danfoss, tool bag, rain coat, umbrella, drill bit (06 mm for wall), drill bit (08 mm for wood), drill bit (05 mm for steel), wire brush, cloth washing brush, tirpal, screwdriver ( 02 in 01 reversible)/ 140mmmake: taparia, soft pvc beading (u-type), epdm rubber seal for windows

Central Government/Public Sector

CTN :38163391 Due date: 20 Nov, 202420 Nov, 2024 32.84 Lacs
Tender For provision of air conditioners water coolers and misc items at kushinagar international airport - supply , installation , testing & commissioning of 5 star , 1.5 tr high wall type split inverter air conditioner unit with rotary compressor operating on refrigerant r-32/non cfc & copper condensor coil of outdoor unit & having cordless lcd remote , auto restart operation with copper refrigerant gas pipeline insulated with nitrile/polythene foam i/c electrical cable of suitable size copper conductor from indoor to outdoor unit (both upto 10 feet ) i/c standard drain pipe , ms base frame / platform duly epoxy painted for outdoor units suitable for operation on 230v , 50 hz single phase ac supply and capable of performing such standard function like cooling , dehumidifying , air circulating etc complete as required. , supply and fixing of extra copper refrigerant piping (beyond the standard length) complete with suction/ liquid line along with insulation and electrical cabling with pvc protection piping for cable and all accessories required for 1.5 tr as per site requirement. , supply , installation , testing & commissioning of 5 star , 2 tr high wall type split inverter air conditioner unit with rotary compressor operating on refrigerant r-32/non cfc & copper condensor coil of outdoor unit & having cordless lcd remote , auto restart operation with copper refrigerant gas pipeline insulated with nitrile/polythene foam i/c electrical cable of suitable size copper conductor from indoor to outdoor unit (both upto 10 feet ) i/c standard drain pipe , ms base frame / platform duly epoxy painted for outdoor units suitable for operation on 230v , 50 hz single phase ac supply and capable of performing such standard function like cooling , dehumidifying , air circulating etc complete as required. , supply and fixing of extra copper refrigerant piping (beyond the standard length) complete with suction/ liquid line along with insulation and electrical cabling with pvc protection piping for cable and all accessories required for 2 tr as per site requirement. , supply and fixing of 20 mm. dia. u-pvc plumbing/drain pipes required for 1.5 tr split acs on surface including all accessories like bends , sockets and water seal joints etc. complete as required. , supply and fixing of 4 kva automatic digital voltage stablizer having working range 170-270v and complete with connections , testing and commissioning etc. as suitable for 1.5 ton split type air conditioner as per aai preferred make list. , supplying and fixing 20 a , 240 v , spn industrial type socket outlet , with 2 pole and earth , modular type plug top alongwith 20 a c curve , sp , mcb , in pvc box/enclosure , on surface or in recess complete with connections , testing and commissioning etc. as required. make havells , model dboxx mcb protected pvc plastic base model (white) , asin b07bvkq17h or equivqlent. , wiring for circuit/ submain wiring alongwith earth wire with the following sizes of frls pvc insulated copper conductor , single core cable in surface/ recessed steel conduit as required. 2 x 4 sq. mm + 1 x 4 sq. mm earth wire , supply , installation , testing and commissioning of 4.0 tr air-cooled tower/ standing type ac alongwith vibration isolator , as per latest bee standard fitted with 100 percentage copper condensing unit comprising of sealed rotary type compressor with inverter technology and non cfc refrigerant like r410a suitable for stabilizer free operation at 3ph , 415v , 50hz ac supply as required , including supply of power cable , copper piping upto 3 meter and drain pipe upto 3 metre both copper pipe and drain pipe separately enclosed in with nitrile ruber insulation including wrapping in white vinyl tape power cabling between indoor and outdoor upto 3 metre , all necessary ms structure for supporting units , anchor fasteners , nut , bolts , with outdoor stand and ms stand painted with anti-rust paint for mounting outdoor units etc. complete as re

CTN :36656277 Due date: 14 Nov, 202414 Nov, 2024 NA
Tender For bid to ras bid to ras corrigendum : tender for supply of o ring , water outlet part , duct , joint , bs ring , joint , joint pn 6 no 175 nse 6point551 class 22 , o ring no 87 21a7 , flexmast coupl pipe 88point9mm opointd , punched gasket , joint , joint dn 150 , gasket , gear wheel , roller bearing skf nj213 , internal circlip dia 120x4 , internal circlip nse 1point37 160x4 , locking wire 1 mm dia l 1mtr 304l , asslypointbtc , injector pump pin , o ring nse 6point531 137 x 1point8 60c7 , locking bolt m14 60 29 u 10point9 , screw 6x6x6 , ring ba 25x35x7 72nbr 902 simrit , o ring rubber , joint dia 184x240xeppoint2 , o ring , seal bearing housing , internal circlip , snap ring , bearing , o ring , o ring ms 295 13 245 60c7 viton , o ring viton an 75 60c7 , plug , joint 65x65x2mm , water inlet flange , water pump impeller , shim , seal balmo fuel feed pump , mechanical seal for pump , flexmast conn gm10006 038 38 od , joint , sleeve spring , key for damper , joint , amber bolt , gasket , thermostat element , thermostatic valve element 57 66 , o ring i 438x4 60c7 , gasket , set of gaskets caf9 , set of oil seal 19x30x7 for aroto g15sp ffp , sperical roller bearing , oil seal retainer , packing at both end , valve seat , drive shaft with u pinion 1028 x , o ring idp 038 x 2u , o ring idp 130 x 3up , o ring for inspection door l 1300 mm long , o ring , neele valve , bearing large end pairs , gasket , flex hose dn 8 l 1m , flex hose dn25 l 1m , flex hose dn 20 l 1m , flex hose dn13 l 1m , flex hose dn 6 l 1m , flex hose dn 6l 1m , flex hose dn 32 l 1m , sleeve dn65 pn16 , sleeve dn32 pn16 , sleeve dn100 pn16 , sleeve dn150 pn16 , sleeve dn80 pn16 , sleeve dn200 pn16 , rubber compensating sleeve dn 150 pn16 , bearing out let connection , set of full flow filtering element , set of diversion filtering element , ball bearing for lube oil filter , set of full flow elements fm s01 lo filter , set of diversion element for fms01 lo filter , set of gaskets for lub oil filter , plunger barrel assly , toothed quarnt , spring coller , spring seat , shim injection pump , push rod for fip , injection pump roller , o ring , expansion bellow , set of gasket for moatti filter , joint for balmo fuel feed pump , gasket , gasket , gasket

CTN :37748954 Due date: 15 Nov, 202415 Nov, 2024 NA
Tender For corrigendum : supply of plywood for general purposes as per is 303 (v2) (q3) , hydraulically regulated door closers (q3) , tower bolts (ferrous metals) as per is 204 (q3) , wood screws (q3) , non - ferrous metal butt hinges as per is 205 (q3) , wire nails (q4) , door handles as per is 208 (q4) , hasps and staples as per is 363 (q3) , wire mesh fabric or cloth (v2) as per is 1568 (q3) , stainless steel kitchen plate rack 30 cm into 36 cm into 9 cm , looking mirror 600 into 450 mm , fevicol 1 kg , pvc rawl plug 100 nos pkt , window glass ordinary 3 mm thick 1 point 2m into 1 point 2m , wooden beading of size 20mm into 6mm into 8 inch , wooden beading of size 20mm into 20 inch size 20mm into 6mm into 20 inch , round plug wooden , gi wire binding , bracket for curtain rod , putty 1 kg pkt , aluminum curtain rod 19 mm dia into 12ft lenght , super flush strip 100 mm wide 10 mtr long , pvc float valve 20 mm , gate valve brass 20mm , hack saw blade , gate valve 15 mm , gate valve 25 mm brass , pvc float valve 15mm , pvc float valve 25 mm , pvc stop cock 15mm dia , water storage tank 500 l isi marked , pvc lid for 1000 ltrs capacity , pvc lid for 500 ltrs capacity , m seal 200 gms pkt , brass jumper washer for 15 mm bib tap , hdpe grating 100 mm dia , gi hook for pipeline , gi check nut 20mm , gi check nut 25mm , cp glass self 450 mm long with 4mm glass , ms angle bracket for whb , cement 50 kg , white cement 1 kg , pad lock 6 lever , drill bit for brick hole 4mm 5mm 6mm 8mm and 10mm bid number/ ( ( ) ): gem/2024/b/5442434 dated/* : 02-10-2024 bid document/ 1 1 / 50

CTN :37928931 Due date: 14 Nov, 202414 Nov, 2024 NA
Tender For bid to ras corrigendum : supply of misc em and br items - towel rail 600 mm long with pipe 20 mm dia , cp bib cock 15 mm long body with flange , aluminium tower bolt 150mm , ms sliding door bolt 300mm , morties lock vertical type brass 4 lever 100 oblique 65 , cp toilet paper holder with stainless steel flap 15mm , cp soap dish fancy type 100mm , cp hand shower rose 150mm , glass pane 4mm thick froasted , curtain rod brackets , ss curtain rod kriobs , ewc seat cover colour white , cp wall mixture with l bend provision for overhead shower , gi pipe medium grade 20mm , cp waste coupling 32mm dia , whb miror aluminum frame 600x450 mm bevelled as mirror mounted on 6 mm thick ac building board , cp pillar cock sink tap regular spout with flange 15 mm , cp mixer centre hole basin mixture wo pop up waste system , cp stop cock with flange 15mm , mirror 24 inch x 18 inch with pvc frame , pvc connection pipe 15 x 450mm , steel wire cloth 0 point 36mm nominal dia , g.i. elbow 20mm dia , cpvc pipe 20mm outer diameter , cpvc elbow 16mm outer diameter , cpvc tee 16mm outer diameter , cpvc elbow 20mm outer diameter , cpvc tee 20mm outer diameter , ms repit 1 oblique 2 inch , glass pane 4mm , gi union 20mm dia , gi socket 20mm dia , ms hasp and staple wire type stove enamelled 100mm size , curtain rod 25mm dia stainless steel , door magnetic catcher , gi socket 15mm dia , stainless steel knob lock for door lock , rubber beading for ai door , gi tee 20mm dia , towel rack cp , grating ptmt 100mm , white cement , butt hinges 100mm steel , butt hinges 75mm ss , ms hasp and staple wire type stove enamelled 75mm size , m.s screws 1 point 5 inch , nails long 1 point 5 inch , nails 3 oblique 4 inch long 100 gram , ms screws 1 inch100gram , ms screws 2 inch 100 gram , m seal 100gm pkt , ms screws 1 oblique 2 inch 100 gram , nail 2 inch long , steel screws 1inch 100 gram , cable jointing kit for 11 kv earthed grade heat shrink type joint complete with jointing materials outdoor 3 c x 95 sqmm 11 kve , cable jointing kit for 11 kv earthed grade heat shrink type joint complete with jointing materials indoor 3 c x 95 sqmm 11 kv e , led driver for 2 feet x 2 feet for recessed light fitting 36w , led bulb 7 watts 230 v , led bulb 9 watts 230 v , led bulb 12 watts 230 v , capacitor 2 point 5 mfd 230 v , mcb spn 40 amp 230 volts 10ka , frls copper conductor cables 4 sqmm multistranded single core 1100 v , frls copper conductor cables 1 point 5 sqmm multistranded single core 1100 v , pvc flexible cable 23 oblique 0 point 0076 twin core , tape pvc adhesive 20 mm x 25 mtr , frls copper conductor cables 0 point 50 sqmm multistranded 3 core 1100 v , sluice valve 200mm dia pn 1point 6 , heating element 1500 watt triangular type , heating element 2000 watt triangular type , thermostat for geyser 25 ltr , holder angular pvc oblique bkl , frls copper conductor cables 2 point 5 sqmm multistranded single core 1100 v , holder batten pvc oblique bkl , pvc connection pipe brass headed 15x450mm , tape pvc adhesive 15 mm x 25 mtr , led down lighter 6w , plug top 15a 3 pin 230 v , fan regulator switch type , regulator electronic for ceiling fan modular type , modular switch 5 amps , modular switch 15 amps 1 module , modular socket 5 amps 2 module , modular socket 15 amps 2 module , sheet metal enclosure with plug top and mcb sp 20a , modular socket with mcb sp 25a , flame proofweather proof rotary switch with cable termination box in lm6 16a single pole on oblique off , flame proof led light fitting 1x16 watt flame proof with die cast alumimum housing with heat resistant with led tube light fixtures driver holders connector etc bid details/ 2 / 112 connector etc

CTN :38046726 Due date: 18 Nov, 202418 Nov, 2024 6.47 Lacs
Tender For corrigendum : the supply of materialsforthe construction of nrlm sanjeevini common work shed at mandalageri village under mgnregs scheme - g-kadd watering charges at 1 % on material, g-kadd sundries charges at 1 % on material, g-kmixer (concrete) - 1 cum capacity, g-kmixer (concrete small used in culvert), g-khom of vibrator 0.71 days, g-ksize stone 20 x 20 x 25 cms, g-kjungle wood runners and planks, g-kbroken stone aggregate 40 mm size, g-kbroken stone aggregate 20 mm size, g-kbroken stone aggregate 12 mm to 10 mm size, g-kboulders, g-kbond stone 20 x 20 x 45 cm, g-kplasticizer / super plasticizer, g-kform work for foundation upto plinth, g-kcoarse sand (zone iii), g-kportland cement, g-kover head & other miscellaneous charges, g-kadd watering charges at 1 % on labour, g-kadd sundries charges at 2 % on material, g-kadd handling , loading and unloading at 1% on material, g-kadd cutting and other wastage 5%, g-kmason class i (with tools), g-kunit cost as per the specification, g-khom of machinaries for planing, g-kms clamps, g-ktw beading for fixing glass, g-ktmt bars fe 500, g-kt section, g-kstays, g-ksilver oak or equivalent planks 38 mm thick, g-kreeded glass 2 mm thick, g-kmullion section, g-kmathi/nandi wood planks for panels 25 mm thick, g-khonnewood planks for panels 20 mm thick, g-khonne wood, g-khandles, g-kcasurina poles 75 - 100 mm dia, g-kcasurina poles 100 - 150 mm, g-kburnt bricks class 35 (non modular), g-kbinding wire, g-kadd handling , loading and unloading at 2% on material, g-kindian type water closet of size 580 mm of specified make with footrests, g-kvitrified tiles 600x600 mm, g-kadd wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint, g-kadd white cement for pointing at 2% on material, g-kadd providing and removing scaffolding at 3% on labour, g-kadd brush, putty, sand paper at 3% on cost of paint, g-kadd brush, putty, sand paper at 2% on cost of paint, g-kadd brush, putty, glue at 5% on cost of paint, g-kadd brush, putty at 5% on cost of distemper primer, g-klime, g-kpainter class i, g-kwhite cement, g-kadd, g-kwelder grade i, g-kfitter class i, g-kz section, g-kwhitening, g-kready mix primer paint (ready mix red lead paint), g-kceramic tiles 30 x 30 cms, g-kglazed tiles 300x450, g-kborder tiles 30 x 10 cms, g-kwater proofing cement paint, g-kenamel paint, g-kdistemper primer, g-kdry distemper, g-kpvc pipe of 10kg cum 110 mm, g-kpvc pipe of 6kgcum63 mm, g-kpvc pipe of 4kgcum75 mm, g-klabour charges for handing errection of rcc rings etc 5, g-ktransportation charges of materials beyond 5 km 10, g-kfabrication charges., g-kcost of 6.5mm m.s. coil, g-kwhite vitreous china clay flat back wash basin size 550x400mm, g-kcopper plated brass piller tap 15mm, g-kbib cock 20mm nominal bore, g-k 100mm s or p trap, g-klicenced plumber with tools, g-kadd white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material, g-kadd cement sand and grit 1% on material, g-kadd 5% for fittings and wastage charges, g-kc.i. / m.s. brackets for flushing cistern, g-klead or pvc connection pipe 32mm dia (for wash basin), g-k hinges 5 heavy duty, g-kcp brass waste 32 mm of standard pattern, g-kcp brass chain with plug, g-kbrass stop cock, g-kpolythylene pipes high density 32mm external dia, g-khandling loading and unloading 3% on material, g-klabour charges for lifting and placing in position and making connection at 7% on material, g-kpolyenthylene water storage tank of specified capacity l

CTN :38176017 Due date: 02 Dec, 202402 Dec, 2024 NA
Tender For supply of white , distemper ,oil emulsion , white , lime unslacked best quality , pink primer , paint white, make asian , paint post office red , paint enamel roof green , red ochre , road marking paint white, make shalimar , white cement birla , red oxide zinc chrome primer , floor paint terracotta or red , synthetic enamel paint black 1st grade , synthetic enamel paint yellow , thinner best quality , lime brush as per sample , paint brush 25 mm , paint brush 50 mm , paint brush 75 mm , paint brush 100 mm , paint brush 125 mm , bathroom cabinet with mirror make prayag , bathroom corner shelf , glass shelf with cp bracket , looking mirror of size 600 x 600 mm , looking mirror 24 inch x18 inch with pvc frame , ms screw wood 20 mm ,100 nos in a packet as per sample , ms screw wood 25 mm 100 nos in packet as per sample , glass pin 20mm , 200g in a pkt , nails wire steel 1 oblique 2 inch as per sample , nails wire steel 1.5 inch , nails wire steel 100mm , nails wire steel 25 mm , nails wire steel 50 mm , nails wire steel 75 mm , cp soap dish , pvc pipe 3inch dia x 10 feet long 75 mm , washer for syphon pvc cistern , thread seal teflon tape , kit oblique fittings double syphone for ewc floor mounted with flush for cistern , ewc floor mounted with in built flush cistern and seat cover 35x40x74cm , butt hinges ms 75 mm , butt hinges ms 100 mm , curtain rod brown colour 20mm dia x 3 mtr long , curtain bracket aluminium 20 mm dia , handle aluminium 125 mm for window , gi wire mesh 0.56 x 1.8 x 15m length , hack saw blade double ended teeth 300 mm long make tapariya , m seal , putty white for glass pane , pgi sheet 0.63 mm thick , felt roofing bitumenious in roll of 1 mtr x 20mtr long , flush strip100mm , flush strip 75mm , touch wood , varnish best quality , fevicol heatx fast setting heatproof adhesive , sunmica sheet 8x4 ft , ms screw wood 50 mm 100 nos in a packet as per sample , ms screw wood 32 mm 100 nos in packet as per sample , corner beading 11 oblique 2 feet , beading 2x1 , beading 1x1 oblique 2 feet , beading 1x1 , ms steel hasp and staple as per sample , aluminum sheet 1roll 50mtr in lenght as per sample , convex mirror fuse wire copper tinned 15 amp isi, fuse wire copper tinned 30 amp, as per sample, lt pin insultor as per isi code, lt shackle insultor , plug top 15 oblique 20 amp, plug top 5 oblique 6 amp, pvc casing capping 20/25mm, pvc conduit pipe 20/25mm, pvc flexible pipe (corrugated) 10-15mm , transformer oil, crystal alum superior quality, lead pig best quality (as per sample), lead wool best quality (as per sample), gland packing 1/4", hot and cold connection pipe for geyser 15 mm dia, 600 mm long code no : pv-0861, nut & bolts with washer as per smaple( size), rubber gasket 3mm thick, as per sample, spun yarn, as per sample, fusible plug 20mm as per sample, fusible plug 15 mm as per sample, flexible cable copper wire 23/.0076 sqmm twin core , pvc cable copper conductor 1.5 sqmm multi stranded (frlsh) , pvc cable copper conductor 1.5 sqmm 3 core, pvc cable 2.5 sqmm copper counductor 3 core , pvc cable aluminium conductor 2.5 sqmm multi stranded, pvc cable aluminium conductor 2.5 sqmm 2 core , pvc cable aluminium conductor 4 sqmm flat twin core , pvc cable aluminium conductor 6 sqmm twin core, pvc cable aluminium conductor 10 sqmm twin core , pvc cable aluminium conductor 16 sqmm twin core, cable jointing kit 1100 volt 3.5 core 50-95 sqmm, out door, gyser element 1500 watt triangle type, gyser element 1500 watt round type , indicator lamp for gyser set of two (red & green), thermostate for gyser, mcb db 2 way spn , mcb db 4 way bid details/ 2 / 99

CTN :38134003 Due date: 27 Nov, 202427 Nov, 2024 NA
Tender For tender for supply of gi plug 15 mm , gi check nut 15 mm , gi hexa nipple 20 mm , gi tee 25 mm , ms tower bolt 100 mm , ms bow handle 200 mm , tiles 300 300 x 200 boxes , tiles 300 300 x 300boxes , nails wire 75mm , tiles 300 400 x 400 boxes , pvc gully 40mm , nails wire 65mm , putty for glass as per approved in pkg of 10 kgs , quick fix/instant stick adhesive in .5gm pkt of 100 , glass pane plain 385x312x3mm , brass washeer 20mm qty 144 nos per pkg , hack saw blade double edge 300 mm , nails wire 32 mm , nails wire 38 mm , nails wire 40 mm , nails wire 50mm , nails wire 60mm , cp magic door eye , stainless steel grating 150 mm , pvc waste coupling 38 mm , screw steel 50 mm in pkt of 100 , cp bib cock 15 mm long body half turn , brass door handle 100 mm , cp bib cock 15 mm with spindle , cp jet with complete 1 mtr length tube , aluminium pegs 125 mm , half turn plus cock spendle heavy duty , aggregate course 20 mm in 2 cum load , glass pane 4 x 3 x5mm plain , aggregate fine in 2 cum load , glass pane 4 x 3 x4mm plain , ms sliding door bolt 250mm , glass pane 2 x 3 x 3mm plain , cp fancy type angular stop core high pressure of long thread , 600 x 450 mm bevelled edge mirror , stainless steel grating 100 mm , aluminium pegs 100 mm , cp pillar cock 15 mm fancy type , brass door handle 150 mm , gi plug 20 mm , m seal (100 gms) , enamel , synthetic
 Loading, Please wait...

Connect us via What's Up