Latest ms trench cover Tenders | Government ms trench cover Tenders

State Government

CTN :39787014

01 Apr, 2025 34.27 Lacs

Jaipur - Rajasthan

Tender For budget announcement 2023-24 57(1) (f) institute of dermatology for centre of excellence in charak bhawan at sms hospital, jaipur civil work (234.00 lacs) at p.w.d. sub dn.-sms hospital-ii, jaipur. (supply of furniture) - conference table: supply of conference table size 7680x3050x750mm made of white oak wood, oak veneer and ss 304 frame. top thickness 30mm made of bwp plywood with white oak veneer pasting on both sides and edges covered with 30x23mm thick white oak wood with miter joints, modesty panel inner and outer shall be made of 18mm thick bwp plywood with white oak veneer pasting. the legs (08 nos.) shall be made of ss 304 grade with pvd coating. table top shall be supported with 02 nos. 40x25mm ms hollow pipe black powder coated which are connected to ss legs. all wood surfaces shall be polished with water based nontoxic pu polish. electrical pop-up box/cable cubby (16 nos.) with built in sockets as per requirement along with wire management system shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., high back chair cushioned : supply of high back chair size 650x580x1200 mm with cushioned seat and back rest. the seating height of the chair ranges from 425mm to 545mm from floor. the seat and back are made up single piece l-plywood and upholstered with leatherette and molded polyurethane foam of density 40 kg/m3. the cushioned armrests are injection molded from polypropylene. the mechanism is designed with features such as knee tilt, 360 degree revolving type, upright position locking back, seat / back tilt adjustment. the chair shall have pneumatic height adjustment of 100mm & class 3 gas lift. ss finish base fitted with 05 nos. of twin wheel castors which are injection molded in black nylon. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, chair :supply of chair size 500x500x900mm. the seat and back is made up of 12mm thick hot pressed plywood and upholstered with leatherette and polyurethane foam of density 40 kg/m3. the one piece armrests are injection molded from black polypropylene. the frame is made of dia 19mm x 2mm thick m.s. tube with ss finish. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, storage cabinet : supply of storage cabinet size 900x450x750mm made of white oak wood & oak veneer. the cabinet frame section 35x23mm & legs section 33x33 shall be made of solid white oak wood. side panels / shutters / drawers made of 18mm thick bwp plywood with white oak veneer pasting. stone top 20mm thick shall be provided which is pasted on 18mm thick bwp plywood. all wood surfaces shall be polished with water based nontoxic pu polish. good quality telescopic channel/hinges/locks etc. shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., computer table : supply of computer table size 1200x

corporations/Associations/Others

CTN :39838771

28 Mar, 2025 NA

Meerut - Uttar Pradesh

Tender For auction sale of m.s. steel meltable,old vcb panel scrap/ms meltable scrap,steel gi/gs wire scrap/earth wire scrap

State Government

CTN :39827512

04 Apr, 2025 NA

Delhi - Delhi

Tender For providing and installation of furniture and miscellaneous related works in east study centre, tahirpur, sol, university of delhi - ws3 - workstation with front divider between tables - 900x550 x 750mm table - 25mm thick pre -laminated particle board of approved shade. the working and non working edges shallbe finished with machine pressed pvc edge banding. the table top shall be supported with ms powder coated "c" shaped leg (50 mm x 50mm thickness) with connectors. provision of wire tray for wire raceway passingwith ends legs cover 18mm thick plpb. laminate shades to be approved by client before execution, ws 6 - workstation table for director/ dy.director/ principal - similar to exisiting at sol north 2400x900x750 , including side credenza and back credenza main table - 2400x900x750supplying desk with main table of size 2400mm x 900 x 750mm(h) and drawer box consisting three drawers lockable. the worktops shall be made of superior quality 25mm thick ply board of grade ii, type ii confirming to is: 12823 of approved shade. the top and side panels will be claded with s laminate of thickness 1mm, one no. of modesty panel and sides shall be provided made of 18-25mm thick laminated ply board of, confirming to is: 12823 of length as per design. wire managers and computer tray shall be provided on table top with 55-60mm dia to hold wires. all exposed edges of table shall have 2mm thick hot melt pvc banding.side credenza - 1200x450x600mmside rack 1200 x 450 x 600mm (h) (ply board)supplying of top shall be made of superior quality 25mm thick particle board of grade ii, type ii confirming to is: 12823 of approved shade. the top and side panels will be claded with laminate of thickness 1mm and 18mm thick and back closed with 9mm thick pre laminated plyboard and with sliding or openable door lockable including lockable drawers and as required nos of shelves shall be provided made of 18mm thick laminated particle board of grade ii, type ii, confirming to is: 12823 of length as per design. all exposed edges of table shall have 2mm thick hot melt pvc banding.back credenza - 2400x450x600mmsupplying of swing door storage unit- the carcass is made out of 18mm thick plyboard top, sides, door, shelves and 12mm thick ply board with both side laminate. the doors are made up of 18mm thick plyboard with prelaminate with hinges, handles & locks . the storage unit is provided with levellors for height adjustment with the help of levellors .laminate shade as per selection, storage- 900x450x850mm supplying and placing in position of wooden storages of size 900mm(w) x 450mm(d) x 850mm(h) metalstorage consisting of swing door, side panels, top panel, back & shelves including base/skirting. the storage is made up of 25mm thick and 18mm thick pre-laminated particle board with 0.8mm thick crca sheet (as per is:513)cladding on both sides and top is made up of 11mm thick bent metal tops made up of 0.8mm thick crca sheets (as per is:513). metal cladding and top are powder coated with epoxy polyester powder of 50 +/- 10 microns thickness. the storage unit is provided with 2 hinge doors made up of 18mm thick pre-laminated particle board with decorative laminate on front side and backing laminate on backside. opening door of the storage to have aesthetically appealing recess handle of aluminium extrusion. the storage unit is provided with two nos of adjustable shelves to be supported adequately by specified hardware. uniformly distributed load carrying capacity of each shelf shall be 40kg. metal storage to be with 3 point central locking arrangement. each storage unit shall be provided with a metal skirting of 15omm(h) along the width of the unit made up of 0.8mm the skirting is powder coated with epoxy polyester powder of 50 +/- 10 microns thickness. storage unit to be provided with 4nos screw type adjustable leveler with plastic base with 10mm adjustment. laminate shades to be approved by client before execution, centre table- 1000x1000x425mm providing

State Government

CTN :39844698

15 Apr, 2025 25.86 Lacs

Multi City - Telangana

Tender For fabrication and erection of ms supporting channel structure along with new cable trays from entrance of crown adit tunnel gate to column no 28 of service bay of el + 154.00mt (u/s side of eot crane beam) for running of armored cables for supply to the emergency distribution panel board (emdb) to be installed at el + 157.00mt (4th floor) of power house, slbhes.

CTN :39835527

15 Apr, 2025 NA

Lohit - Arunachal Pradesh

Tender For supply of ceiling rose 3 pin 5 amp isi marked , s p 5 or 6 amp one way modular switch , s p 5 or 6 amp two way modular switch , s p 15 or 16 amp one way modular switch , 3 pin 5 or 6 amp modular socket outlet , 6 pin 15 or 16 amp modular socket outlet , mcb 10 amp single pole , mcb 16 amp single pole , mcb 32 amp double pole , mcb db box 16 way , insulated copper earthing wire 1 sqmm green colour 90 mtr roll , batten holder , wall mixer three in one , cp shower hose pipe 1 pt 5 mtr long , cp over head shower with arm , cp hand shower with flexible arm , sintex tank 1000 ltr capacity double ply , cp extension nipple 1 pt 5 inch long , cp flange , cp waist jali 75 mm dia , cp waist jali 100 mm dia , cpvc solvent 118 ml pack , padestel wash basin pot including all fittings complete , indian type w c long make , looking mirror 450 x 600 mm and 6 mm thick without frame , ptmt glass self , peg rail ss , round mirror holder bracket pack of four 8 mm , pvc cowl 4 inch dia , pvc long bend , paint white matt emulsion for ceiling , interior acrylic emulsion paint , stainer 200 ml pack cream colour , wall primer white , red oxide primer , paint enamel golden brown , painting brush 1 inch , painting brush 4 inch , painting roller , wood primer , putty applicater , white cement , 6 mm thick plywood 8 feet x 4 feet , 12 mm thick plywood 8 feet x 4 feet , fevicol hitex , touch wood varnish , wire mesh 4 feet width 15 m long , ss hinges 75 mm long , screw 3 by 4 inch ss , screw 1 inch ss , screw 1 pt 5 inch ss , screw 3 inch ss , ppgi sheet green 3 pt 5 m x 1 pt 8 m , ppgi ridge , non skid floor tiles 600 x 600mm or 300 x 300 mm , wall tile 600 x 300 mm , wooden scanteling 5 inch x 4 inch x 12 feet teak wood , wooden scanteling 4 inch x 3 inch x 12 feet teak wood , wooden planks 10 inch x 1 pt 5 feet x 12 feet teak wood , exhaust fan 230 mm dia , ceiling fan 1200 mm , water gyeser 20 ltr cap , tile cutter blade 4 inch bosch , tile cutter machine , ms square pipe 40 mm x 40 mm x 4 mm , cgi sheet cutter scissor , glass cutter , 35 mm thick factory made solid panel pvc door shutter with solid pvc chaukhat of single piece extruded profile decorative finished wood grain finished including all door fittings complete

CTN :39812987

02 Apr, 2025 30.00 Lacs

Pali - Rajasthan

Tender For furniture items and installation-two seater table with bench:two seater desk cum bench.overall size: h-760 w-950 x l-1050 (mm) age group: 15 & abovematerial description:-desk, seat & back of 18mm thick. pre-laminated board (plb) with 2mm pvc beading all over edge.frame vertical pillar of 1.2 mm (18swg) thick. crc sheet is 513book shelf & modesty panel of 0.8mm (22swg) thick. crc sheet is 513.frame base tube of 50x25x1.21mm (18swg) thick. erw rectangular tube (crc)all support tube of 25x25x1.21mm (18swg) thick. erw square tube (crc).seat & back frame tube of 25x1.21mm (18swg) thick. erw round tube (crc)good quality pvc shoes & bufferatbottom.all steel parts of powder coated with standard quality powder after 10 tanks anti-rust treatmentlectureroompodium:wooden podiumasper drg.no. jnt-007-274-00-270919 (without microphone& speaker) overall size: w-600 x d-600 x h-1200 (mm)classroom white boardsize:6x4feetiron bed:single bed for hostels & barrack.overall size:l2030xw827xh695ml80"xw32.5"xh27.4"inchmaterial specifications:the raw material used will be prime quality crca asper is 513 (1994,1998) 'd'grade.frame structure made up of prime quality crc(m.s.) rectangular tube 25x50x1.2mm (18 swg.)body made up of prime quality 0.8mm (22swg.)vendors should have calibrated testing equipment through nabl lab and copy of the sameshouldbeenclosedalongwiththetender.all steel parts will be epoxy polyester powder coated to the thickness not less than 50 microns finish after 10 tank anti-rust treatment and b grade phosphating (in house) & same will be demonstrated to the purchaser during pre- dispatch inspection.iron stoolfixed square stool with ms square frame with ss top (304grade)overall size (approx.): h-515xw-420xd-420(mm)material description:ms top 1.2mm thick. (18swg) crca sheet is 513grade.stool frame structure of 25x25x1.2mm (18swg.) erw squarepipe crc sheetis513.good quality pvc shoes at bottom.all steel parts will be epoxy polyester powder coated to the thickness not less than 50 microns finish after 10 tank anti-rust treatment and bgradephosphating (in house) & same will be demonstrated to the purchaser during pre-dispatch inspection.notice boardsize:4x3ftvisitor bench3 seats perforated (chromium plated) cluster chair on beam with handle.overall size(approx): l-73xd-28xh-30.5(inch)material description:integrated seat & back with arm & backrest.all frame work made up of chrome plated.seat & back will be perforated type.base will be htypeframe.bench will be properly welded and well finished.frame work will be made up of good quality material.computer tablecomputer table with pullout tray for keyboard, 3drawer unit, knee perforated panel & full shelf. overall size: w-120xd-60xh-75(cm) [48"x24"]material description:maintop & bottom shelf of 18mm thick. wood based high quality pre-laminated particle board (plb) of tesa with 2mm pvc edge band by hot melt glue process forbeading all over edge.table top c frame& key board trey of 0.9mm (20 swg) thick. crca sheet is513.leg tube, leg tube support & footrest of 25x25x1.2mm thick. (18swg) erw square ms tube.3 drawer unit of 22swg (0.8mm) & 23swg (0.7mm) thick.crca sheet is513.good quality camlocking & pvc handle.perforated modesty panel of 0.7mm (23swg) thick. crca sheet is 513.good quality telescopic channel (ebco) for key board trey.good quality pvc shoes at bottom.all steel parts will be epoxy polyester powder coated to the thickness not less than 50 microns finish after 10 tank anti-rust treatment andb gradephosphating (inhouse) & same will be demonstrated to the purchaser during pre-dispatch inspection.class room tableoffice table with single drawer& half modesty panel, erw square pipe frame.table with top size of: w-120xd-59(cm) [48"x24"]material specification:table top: should be used best quality top of 19 mm thick plb of tesa with isi marking from branded manufacturer. 4 sides of the top will be banded with hi

Central Government/Public Sector

CTN :39822265

02 Apr, 2025 4.95 Lacs

Ranchi - Jharkhand

Tender For two in one led light which contains the led light, led driver, charge controller, life po4 battery in one ip65 rated enclosure, 30w led light, 12.8 v 24ah lithium ferro phosphate battery, 75 w solar poly crystalline pv panel, m.s. powder coated g.i

corporations/Associations/Others

CTN :39824971

28 Mar, 2025 NA

Multi City - Multi State

Tender For auction sale of dg cranking,cow tower,ms scrap,ac,fcu,ipms,ppc,smps,tcu,dg battery(with electrolytes),rectifier modules,sps/spsm/sp,lcu-copper,piu,shelter panel,tower scrap & accessories

corporations/Associations/Others

CTN :39824970

28 Mar, 2025 NA

Kamrup - Assam

Tender For auction sale of aluminum cable,battery chiller,fire extinguisher,ms scrap,piu,transformer,dg battery(with electrolytes),dg cat-4,shelter panel

corporations/Associations/Others

CTN :39838514

28 Mar, 2025 NA

Kheda - Gujarat

Tender For auction sale of cabinet,cc charger,lcu-copper,lcu aluminium,all mix cable scrap,fire extinguisher,micro cooling (mcu),cow tower,amf panel,dg battery(with electrolytes),fcu,tx rack,smps,ms scrap

Ms Trench Cover Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors