Tender For tender for supply of neoprenerubbersheet 3 to 3.2 mm thick as per attached , as per attached specification , as per attached specifications , nitrile butyl nbr or bunan rubbersheet 3 to 3.2 mm thick as per attached specification , nitrile butyl nbr or bunan rubbersheet 5 to 5.2 mm thick as per attached speci
Tender For tender for supply of stud titanium m 42 x 260 , washer titanium size 12 , stud titanium m 36 x 190 , nut titanium m 24 , nut titanium m 14 , handle , brass , chest or lifting 4 , stud titanium m 30 x 190 , lip piece scupper discharge diameter of pipe 5 no no of screw6 , decelerating unit for 0413/9709257 , valve grinding paste coarse , allu.alloy pop revit 2.3mm x 50.5mm , packing material hemp 7/8 (22.2mm) square , bushing rubber 2 unit type k , 180-360 kgs(soft) , neoprenerubbersheet thick 12.5mm (1/2) width 1mtr , neoprenerubbersheet 9.5mm (3/8) width 1mtr , rubber beading for ramp well 59 x 10 cm for trv , mount resilient typep7d(1542kh)mkll shock/vibration mounting , lip piece scupper discharge dia pipe 2 no of screw 3 , gasket asbestos joint steam & water drum 406.4x25.4x4.80mm , paper gasket oil proof jointing , pin drop nose c/w key chain and s books 7/16 d , pin drop nose c/w key chain and s hooks 3/4 d , hydraulic door closer , mortise lock 6 lever open-in right hand , pad locks iron galvanised (65mm) 2-1/2 , nails steel wire brad swg17 length 3/4 , hasp staple steel 125mm , hasp & staple 6 , padlock iron galv 4 levers with male keys 40mm , glip butterfly tapped 3/4 gun metal for hatch covers , nut butterfly nb open type m6 , nut butterfly nb close type m6 , washer titanium size 10 , stainless steel counter sunk screw (10x1.50x35mm) , packing hemp 1/2 square (12.7mm)
Tender For supply of aluminium chequered sheet 5 x 1000 x 2000 mm, as per drawing/specification: "rdso spec c8217 revision 02 five bar pattern (iv), as per is: 14712-99, fig-iv (five bar). [ warranty period: 30 months after the date of delivery ]
Tender For supply of aluminium chequered sheet for flooring with five ridges pattern of size- 3200 mm x 775 mm x 2.00 mm min. thickness as per rdso spec.no. c- 8217 rev-ii of september. 2013 with height of elevated ridges 1.0 %b10.4mm as given in is: 14712-1999. [ warranty period: 30 months after thedate of delivery ]
Tender For auction sale of rolling stock - 07 coaches--lot no 5626045001 at crs/tpty scrap depot, ap [andhra pradesh] available with cdms/sd/crs/tpty scrap depot. description: cond. &u/s 8 wheeler bg coaches without bogie complete, wheel sets & rc items. coach nos (1)sc wgscn 057268 (2)sc wgscn 037222 (3)sc gs 037409 (4)sc ra 011213 (5)sc wgscn 057301 (6)sc wgaccn 047102 (7)sc wgscn 057291 make:icf/rcf. net saleable qty :171.70511mts; approx. weight of ms: 156.01366mts; approx. weight of rexine, foam, pvc, compregsheets, limpet sheet:5.55mts; approx. weight of ss lavatory pans:0.21mts; approx. weight of ss auxiliary water tanks:0.08mts; approx. weight of uic rubber:0.81mts; approx. weight of aluminum:0.1mts; approx. weight of aluminum hat racks:0.0116mts ; approx. weight of aluminium chequered sheets:0.644mts; approx. weight of al. hydraulic doors:0.03mts; approx. weight of al. ac roof vents:0.03008mts; approx. weight of al. beadings:0.05mts; approx. weight of al. roof:0.35mts; approx. weight of ss panels :0.441mts; approx. weight of pvc copper cables:0.261mts; approx. weight of ss truff floor:4mts; approx. weight of ss biotanks:0.99mts; approx. weight of ss under slung tanks:0.55mts; approx. weight of ss:0.08547mts; approx. weight of al. shutter frames and sill plates:0.359mts; approx. weight of rubber, woods, wooden seats with back rest, fibre shutters, window glasses:0.6225mts; electrical items: approx. weight of copper:0.3758mts; approx. weight of aluminium:0.141 mts; note:-(1) cutting is permitted to loadable sizes.(2)rc items mentioned in the excluded/reclaimed items list to be returned to railways. the quantity of rc items mentioned below will be arrived as per the joint handing over memo issued by the railway authorities to the successful bidder at the time of cutting/handing over of the lot and the same list of rc items should be returned to railways by the purchaser.(3)railways does not guarantee for quality, quantity, description, etc. purchasers are advised to physically inspect the lot and satisfy themselves before bidding as no communication/ complaints will be entertained under any circumstances regarding shortage of material. (4)any non-ferrous items, electrical items, rc items found in excess to the list mentioned below & not appearing in the list of saleable items to be returned to railways.(5)successful bidders must ensure the rc items at the time of taking over and same should be returned to custodian before effecting delivery. in case if item cannot be seen/count/weigh before dismantling, then the same will be jointly inspected soon after dismantling for inclusion in joint collection list of rc items.(6) the purchaser is responsible for providing adequate safety firefighting equipment such as fire extinguishers etc., on the spot at the time of cutting and delivery. (7)free delivery period (fdp) for the lot is 60 days. (8)in addition to the above, purchasers must comply with the special conditions mentioned below. location: line no.01 of old cutting yard/crs/tirupati. delivery on number basis only. total qty 07 numbers.pl no 98111048(01) hsn code:72042990. gst @18% on forward charge basis.
Tender For supply of aluminium chequered sheet 5x1050x2000mm, as per drawing/specification: "rdsospec c-8217 revision 02 ""single bar pattern (ii) , as per is:14712-99, fig-1."" [ warranty period: 30 months after the date of delivery ]
Tender For supply and positioning of air receivers (10 m3 - 3 no's & 1 m3 - 4 no's) for compressed air systems , supply of ss pipe, pipe flanges, buttweld fittings etc. as per table-9 of annexure-2 (edt-2868) , supply of hydraulic & pneumatic fittings, valves and components as per table-10 of annexure -3 , installation and piping works of air systems including oem commissioning support for hal supplied co , transportation of hal items from aerdc bangalore to iaf naliya (per transport) as per annexure-5 (ed , installation and piping works for fuel system as per hal dwg 61-03-100 & hydraulics system of etb as , supply, fabrication and installation of metal platforms with aluminium chequered sheet covers around , installation and commissioning assistance for jfs test rig as per dwg no. 01-25-740 as per annexure- , supply and installation of sign boards, equipments and tools for the facility as per annexure-9 , providing commissioning assistance to hal engineers for etb, mcw and jfs test rig including technica
Tender For auction sale of depot non ferrous scrap - 98230013 scrap released aluminium, mixed aluminium and aluminium casting mixed items such as frames, jali, patti, moulding, jali, avm,aws track magnet box, door closer,dome cover, box, sheet, pipes, wire, junction box, dv box, chequered plate, indicator frames, and other aluminium items at this location with or without major /minor attachments of ferrous, non ferrous, fibre, fibreglass, cloth, pvc, rubber, sponge, glass, glass wool, coal tar etc. with or without rust, dust, oil, cement, mud, wet and grease.un serviceable to railway use loading by purchaser. note: bidders are advised to see the lot physically . delivery will be made as on as it basis.