Latest nitrogen flushing machine Tenders | Government nitrogen flushing machine Tenders

CTN :39857506

19 Apr, 2025 7.60 Lacs

Pune - Maharashtra

Tender For supply of sealer for straws and tubes

CTN :39835171

16 Apr, 2025 NA

Mumbai - Maharashtra

Tender For custom bid for services - application of tefro floor ep coating onboard ins kalvari- 1 services for surface preparation to st3 standard 70 sqm, 2 services for application of primer in dry and wet compartments 70 sqm, 3 services for application of underlay in dry and wet compartments 70 sqm, 4 services for application of top coat in dry and wet compartments. 70 sqm, 5 services for application of sealer coat/ non-skid in dry and wet compartments. 70 sqm, 6 material for application of primer in dry and wet compartments 70 sqm, 7 material for application of underlay in dry and wet compartments 70 sqm, 8 material for application of top coat in dry and wet compartments. 70 sqm, 9 material for application of sealer coat/ non-skid in dry and wet compartments. 70 sqm.

Central Government/Public Sector

CTN :39601111

03 Apr, 2025 41.48 Lacs

Guwahati - Assam

Tender For corrigendum : supply of di electric tube sealer

State Government

CTN :39787014

01 Apr, 2025 34.27 Lacs

Jaipur - Rajasthan

Tender For budget announcement 2023-24 57(1) (f) institute of dermatology for centre of excellence in charak bhawan at sms hospital, jaipur civil work (234.00 lacs) at p.w.d. sub dn.-sms hospital-ii, jaipur. (supply of furniture) - conference table: supply of conference table size 7680x3050x750mm made of white oak wood, oak veneer and ss 304 frame. top thickness 30mm made of bwp plywood with white oak veneer pasting on both sides and edges covered with 30x23mm thick white oak wood with miter joints, modesty panel inner and outer shall be made of 18mm thick bwp plywood with white oak veneer pasting. the legs (08 nos.) shall be made of ss 304 grade with pvd coating. table top shall be supported with 02 nos. 40x25mm ms hollow pipe black powder coated which are connected to ss legs. all wood surfaces shall be polished with water based nontoxic pu polish. electrical pop-up box/cable cubby (16 nos.) with built in sockets as per requirement along with wire management system shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., high back chair cushioned : supply of high back chair size 650x580x1200 mm with cushioned seat and back rest. the seating height of the chair ranges from 425mm to 545mm from floor. the seat and back are made up single piece l-plywood and upholstered with leatherette and molded polyurethane foam of density 40 kg/m3. the cushioned armrests are injection molded from polypropylene. the mechanism is designed with features such as knee tilt, 360 degree revolving type, upright position locking back, seat / back tilt adjustment. the chair shall have pneumatic height adjustment of 100mm & class 3 gas lift. ss finish base fitted with 05 nos. of twin wheel castors which are injection molded in black nylon. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, chair :supply of chair size 500x500x900mm. the seat and back is made up of 12mm thick hot pressed plywood and upholstered with leatherette and polyurethane foam of density 40 kg/m3. the one piece armrests are injection molded from black polypropylene. the frame is made of dia 19mm x 2mm thick m.s. tube with ss finish. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, storage cabinet : supply of storage cabinet size 900x450x750mm made of white oak wood & oak veneer. the cabinet frame section 35x23mm & legs section 33x33 shall be made of solid white oak wood. side panels / shutters / drawers made of 18mm thick bwp plywood with white oak veneer pasting. stone top 20mm thick shall be provided which is pasted on 18mm thick bwp plywood. all wood surfaces shall be polished with water based nontoxic pu polish. good quality telescopic channel/hinges/locks etc. shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., computer table : supply of computer table size 1200x

State Government

CTN :39825597

04 Apr, 2025 NA

Kolkata - West Bengal

Tender For quotation for rt-pcr plates and rt-pcr plate sealer

Central Government/Public Sector

CTN :39832427

25 Apr, 2025 NA

Dhanbad - Jharkhand

Tender For supply of spare parts of sigma 300 fesem - spare parts of sigma 300 fesem, cathode tfe 174c (model no.000000-0302-460), transmitter extractor voltage \(model no.349520-0071-000), 6-hole aperture d10/20/30/60/120/240 m (model no.348520-0579-001), extractor aperture mo d400 m (model no.348520-0097-001), copper gasket, dn 100 cua100-crp(model no.000000-0546-290), al-sealer small (liner tube) (model no.348520-0609-000), external aperture d90 m d3mm t250 m (model no.348520-0580-001), anode pluggable f/ 8 screws open (model no.348520-0303-001), switch box for x- tiff (model no.000000-0239-500), tip seal kit f/n xds 10i pump (model no.350500-0216-000)

State Government

CTN :39813378

29 Mar, 2025 1.95 Lacs

Jalore - Rajasthan

Tender For nohp dental consumables- diamond burs (pack of 5 burs) , straight, , taper, , inverted cone, , round, , files:k-files (2% taper), , pack of 6 files stainless steel, , no. 15 to 40 (25mm), , no. 45 to 80 (25mm), , gutta percha points: 2%, , pack of 120 gp points, , no. 15 to 40, , no. 45 to 80, , disposable plastic suction tips, , (pack of 100 tips), , zinc oxide powder (110gms), , eugenol (15ml), , glass ionomer cement restorative, , (pack of 15gm powder & 10ml liquid), , posterior composite resin kit, , (pack of 7*4gms sytinge/5ml, primer bonding agent/2ml,etchent gel (37% phosphoric acid), 10 microbrushes, 10 applicator tips, instruction manual), , shades: a1/a2/a3/a3.5/b1/b2/b3, , temporary filling material (40gms), , hypochlorite 3% (500ml), , root canal sealer, , zinc phosphate cement, , flowable composit syringe, , topical local anesthesia, , edta syringe, , caoh syringe, , caoh powder, , x ray developer pouch, , x ray fixer pouch,

CTN :37839567

28 Mar, 2025 NA

Pune - Maharashtra

Tender For bid to ras corrigendum : supply of integrated electrosurgical unit and vessel sealer (q2)

CTN :39837721

10 Apr, 2025 NA

Kanchrapara - West Bengal

Tender For supply of procurement of harmonic machine or ultrasonic vessel sealer device etc.

CTN :39803158

22 Apr, 2025 70.00 Lacs

Koppa - Karnataka

Tender For supply, installation, commissioning and operation of 500kg per day capacity sikakai processing and packing plant at lamps society, koppa, chikkamagalur district under ntfpce project-feeding tray for feeding material into pre-grinding chamber.tray size 210x90x12mm (lwd) and electromagnetic vibratory feed hooper moc - sselectrical rotary air drier with 3mt. conveyer, 3hp motor, 3hp blower, and 10 kw electrical heater with control panel compete set moc - ms. (to remove the moisture in the sikakai before feeding to the floor mill customized design: bidder shall provide the technical specification along with technical bid. heater and motors capacity may varies depending on the design)vertical pre-grinding chamber with 10 hp motor and cyclone tank (upto 2000 microns) moc ms.impact pulveriser (ip 25) flourmill with blower, cyclone separator, whizer classifier and cotton balloon main contact parts are tray crushing chamber liner, hammer, toothed liner classifier, blower liner & leaf, airpipe & cyclone tank. shaft, boss plate and body fabricated in ms.(purpose: fine grinding of the blended materials) rotary air lock valve with hp motor. moc-msclosed type group filter with self-cleaning air purging unit with 5 hp low pressure blower and a suitable capacity compressor. mild steel fabricated slotted basement with anti-vibration mount, motor pulley, v belt and belt guard (suitable for fixing ip 25 and motor)30 hp 3 phase motor 1440 rpm - preferrable make : crompton / havells / siemensvibro sifter (pvs 24) single deck type with 0.5 hp motor dust cover and 600 mm dia. sieve 20 mesh mesh/micron size (fine powder output). moc - contact parts in ss 304 and remaining in ms.screw elevator with 1.0 hp motormixing machinery - ribbon blender (prb 100) volume of vessel - 300 ltr, handling capacity per batch by weight-100 kg and by volume-200 ltr. with 2 hp motorcrompton make or equivalent, reduction gear bonfiglioli make or equivalent, feed guard grill, lid, discharge shutter, left and right ribbon. moc contact stainless steel 304 and frame in ss 202screw conveyerwith 1.0 hp motor for feeding to the to collect silo) moc contact parts ss 304. shifting the powder from impact to storage xylo, hp stirrerstorage tank 500kg capacity1000 ltr volume 500kg by wt. with butterfly valve & fitted with vibro motor 0.5 hp-1 nos and support frame. ss 304 silo material, frame in ss 202. screw conveyor with 1.0 hp motor contact parts in ss 304, (for feeding to packing machine) vffs with servo auger anti trickling attachment to pack sikkakai powder 50gm, 100gm and 200gm, speed - 30 to 35 packets/min (depending upon the range & nature of product), accuracy - 0.5 to 1%, power - 2 kw & 1.5 kw heating, 1 hp stirrer motor, packing material - laminated film like polyester poly, metalized polyester, bopp, opp etc. (including extra collar and screw). including hot foil coding machine.5 hp air compressor(oil free) including the necessary accessoriesconveyer vertical band sealer machine.double stage mill (dm410-2) with pre crushing and fine grinding chamber, fine grinding chamber size 4" width x10" dia, cutting hammer 4 nos, fine grinding hammer 4 nos, toothed steel liner, water cooling jacket, sieves and cotton balloon. material of construction ss (for grinding small quantity of material) 10 hp siemens 3 phase motorparts of flour mill - ms fabricated slotted basement with anti-vibration mount, motor pulley, v belt and belt guard. (suitable for fixing one pulveriser and motor)cubical control panel fabricated in cr sheet for total power (75 hp for machineries) with fuse links, fuse switch, starters, capacitor, ammeter, volt meter, volt selector and panel fixtures. earth pipe and earth wire cable from motor to panel and electrical wiring for plant & machineries plant including electrical wiring inside the building wherever necessary plastic bag top stitching machine. (100 bags / hr.)trolley ss 202 size 5' length, 3' width and 2' height fitted with 4 whe

Nitrogen Flushing Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

State Government