Tender For auction sale of others - miscellaneous coach released material mixed condition i.e industrial waste consisting of- (1) decolite released from floors of coaches. (2) pieces of porcelain wash basin, commode etc., broken pieces of plain and colour glass released from coaches with or without non ferrous/ferrous attachment, if any. (3) old l p sheet (decolum) of irregular sizes including pop rivet, seat/berth no. plates, pieces of limpet sheet, off-cuts of broken unserviceable lp sheet, unusable timber/plywood/wood scrap, broken pieces of compreg, plywood, broken slates, pieces of berth/shutter panel etc. released from coaches. (4) unserviceable/perished rubber items like-window sealing rubber, gas rubber hose pipes, shutter felts, rubber released from coaches, unserviceable pieces of foam, rexene and recron. (5) floor sweeping consisting of sand, mud, saw dust, scrap paper, coach rust ashes, rusty nails, nut-bolts, washers, small pieces of rusted mouldings, and pieces of ss moulding aluminium rivets etc, which cannot be segregated with reasonable effort, will be allowed in small quantity. (6) released unserviceable plastic spool containing end pieces of filler wire, wire rope, pieces of thermocol, unserviceable electrical switches with pieces of electrical cable, minor attachments, if any which cannot be segregated with reasonable efforts, plastic bend pipes and released air filter of rmpu. (7) released packing material (rubber and wooden) polythene bags, unusable gunny bags, card board, paper, puttah, gatta, old/teared hand gloves, aprons, etc. (8) broken welding hand screen, helmet, face shield, broken pieces of battery container, bakelite, plastic/pvc sheet. broken pieces of battery flutes, flexible pipes. lot no. crws/bpl/mech/coach furn/25-26/05 date: 16-12-2025 note: (1) ferrous and non ferrous metallic items except minor attachments with the material of lot will not be delivered. (2) all materials should be lifted with road level in sweeping condition. (3) delivery will be made on actual measurement. (4) ferrous & non-ferrous items will be returned by purchaser to stockholder during delivery, if any found in the lot. (5) hazard waste item i.e. paint peeling, paint-dust will not be delivered. (6) if any another material found except description of material will be not delivered and returned to stock holder. (7) sorting/segregation of material is not allowed.
Tender For corrigendum : auction sale of depot ferrous scrap - scrap remnants of lasercut,plasma cut, gas cut ms and en10025 spec plates above 6mm thickness generated from lhb unit of all sorts, shapes, profiles and skeletons, laser/gas cut circular pieces including bits and strips, and rusted remnants of gascuts unusable to icf. note-1. loading in the same vehicle in forenoon and afternoon session is permitted . gst-18 percent. other taxes as applicable.gst and any other taxes as imposed by central or state government will be to buyers account location- area at south east side of lhb weigh bridge by the northern side of boundary wall on raised area at east side of lhb depot office quantity-200000 kg. ul no-36 98050114 13 14. hsn code-720429.
Tender For auction sale of depot ferrous scrap - scrap u/s stainless steel items such as lavatory pan, glass stand, wall protector, bracket frame , stainless steel rmpu frame with and without part and fitting , nf attachment if any, stainless steel utensils, cutlery, and pot, wash basin, soap dispenser, rings, dustbin, gas stand, cloth hanger, stool, chair, hot case, water tank, boxes, frames and other steel items of sorts & sizes with minor intact ferrous, nf, rubber, insulation attachment if any of sorts and sizes. loading order gd-03 bin no. 366 ( iron cage) followed by beside godown no. 05 followed by bin no. 106 location: gd-03 bin no. 366 ( iron cage), beside godown no. 05 and bin no. 106
Tender For auction sale of rolling stock - condemned and unserviceable bg alco loco no.wdg3a 13499 with available items [refer enclosure for the material composition].location: diesel loco shed goc. custodian: sse/diesel shed/goc. re-claimable items - [1] wheel set complete [axle, wheel disc, bull gear, rsp tube, axle boxes hnbc with bearings]-6 sets. advice note no.073817-25-13224, dt: 03.02.26. note-[1] delivery to be made on as is where is and lot basis.[2]the location indicated is only tentative. railway reserves the right to change the location of sold loco, based on the availability of track, cutting and loading space and other administrative reason, as deemed fit by the auction conducting officer.[3]gas/chisel cutting is permitted only to sizes that are loadable with a crane,only after ensuring sufficient safety measures against fire hazards etc. to avoid any mishap to any person, railway material etc. and the same should be ensured by the witnessing officials.[4]in case purchasers require usage of any railway assets/materials such as electricity/ forklift truck etc. during the process of delivery, they are required to pay the prescribed amount to railways, as directed by the respective custodian of the lot. special condition-[1] reclaimable item as said above in description of the lot, should be returned to the custodian before commencing delivery.[2] in order to make the assessment, the purchaser may visit the locos offered for condemnation and the site conditions before quoting the offer.[3]the purchaser has to make his own arrangements such as tools, lifting tackles, lifting equipment, gas cutting equipment.[4]the weight and quantities were taken into consideration as advised by the custodian [5]the purchaser may note that some of the reclaimable items of locos are to be stripped instead of gas cutting to avoid damage to rc items and the purchaser should make such arrangements.[6]the purchaser is strictly instructed to transport/stack all the reclaimable items at one location well away from the cut off parts of the locos as directed by the custodian. [7]the purchaser will be held responsible for any damage/fire accident caused to the railway property. [8] railway is not responsible for any shortage.[9] after completion of delivery, purchaser has to keep the cutting and loading spot neat and clean,free of any left over loco scrap.[10]railways does not guarantee for quality, quantity description etc.[11] delivery should commence immediately after cutting without any delay. [12] the courts in chennai alone shall have exclusive jurisdiction in the matters/disputes arising out of the contract/arbitration/conciliation proceedings and the place of arbitration/conciliation, if any, shall be in chennai only. [13] bsv partly paid along with emd will be forfeited, if full payment is not received in stipulated time, with interest if any applicable. [14] part delivery is not permitted against part payment. [15]if any hsd oil/lube oil available in fuel tank/oil sump of the said locos, the same may be returned to the custodian. (location:-diesel loco shed goc)
Tender For auction sale of depot non ferrous scrap - p.l. no. 98230025. aluminium scrap consisting of condemned and unserviceable beadings , louvre shutters, glass shutters (without glass) , pipes, plain / chequered sheets , sheets, room partition channels and frames, coach window frame , flats of sorts and sizes and similar items aluminium in nature . as is where is condition . note:- (1) manual removal of ferrous / fiber /glass/ wooden attachments permitted ( i.e. chisel cutting and hammering ) but gas cutting not permitted. (2) cssd/goc electronic weigh bridge to be used for weighment .
Tender For auction sale of depot ferrous scrap - lot consisting of condemned various kinds of ms automobiles spare parts with or without other metal attachments as available in the location, like forklift transmission assembly, rear axle assembly, radiator assembly, condenser, lift cylinder assembly, steering cylinder assembly, sprocket, pulley, gas springs, water pump assembly, parking brake lever, exhaust pipe assembly, torque converter, turbo charge, lube oil pump, chain sheave, brake assembly, clutch assembly, clutch plates, clutch disk, friction piece, oil distributor, flow control valve , tube steer axles, special adapter, steering rod assembly, wheel hub rear, front, air brake booster, idler, tilt lock valve, transmission filter assembly, fuel filter mounting, exhaust pipe, steer knuckle, shaft drive axle, pinion shaft, brake pedal assembly, orbital valve, starter motor shaft, clutch cylinder assembly, special nut, alternator pulley, chain assembly, coupling, shim, fly wheel ring, thermostat, fly wheel housing, tension spring, special spring, brake drum, cylinder kit, chain assembly, brake shoes, pinion gear front, cs pulley, flange, ball joint, guide plate, clutch cylinder, bushing steer axle, gas spring, blower unit, pump for ac unit, accelerator cable, brake cable, transmission cable, choke cable, clutch plate assembly, nuts, bolts etc., with or without other attachments as available in the location. delivery will be given as is where is basis. approximate weighment of above items is 4800kgs. note : purchaser can inspect the materials thoroughly before e-auction, lot will be delivered as is where is basis only. ferrous : ms : 4700kgs (appr.) with or without ss, ci, and other metal attachments non ferrous: aluminium: 100kgs (appr.) delivery unit : mt.