Latest noise figure meter Tenders | Government noise figure meter Tenders

CTN :38381104

31 Jan, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : procurement of ge spares at bpcl mumbai refinery - amplifier with jb, flare gas flow meter, amplifier, trnsdcer, proximity system test kit,, power cord, proximitor, proximity probe, tdi,, monitor rod position, probe,vibration, bently nevada monitoring system, module,tdi, monitor, cable, seismic transmitter,, proximitor

Central Government/Public Sector

CTN :39010692

01 Mar, 2025 NA

Ranchi - Jharkhand

Tender For supply of - wall table code one standing ht nine hundred mm, island table code three standing ht nine hundred mm, island table code eight sitting ht eight hundred mm, wall table code two standing ht nine hundred mm, emergency shower with eye wash, overhead storage size-l-750xd-375xh-675 mm, openable shutters with glass , overhead storage size-l-600xd-375xh-675 mm, openable shutters with glass, confined workplace for handling corrosive chemicals cwfh fumehood, full size locker overall size - 1980 mm x 910 mm x 480 mm - 18 compartments, open type rack of size l-1000x d-450xh-2100 mm, shoe rack of size l-1000 x d-450 x h-1200 mm, wall table code four standing ht nine hundred mm, wall table code five sitting ht eigth hundred mm, wall table code six sitting ht eight hundred mm, wall table code seven standing ht nine hundred mm, wall table code nine sitting ht eight hundred mm, wall table code ten standing ht nine hundred mm, counter code eleven , wall table code twelve standing ht nine hundred mm, wall table code thirteen standing ht nine hundred mm, wall table code fourteen standing ht nine hundred mm, wall table code fifteen standing ht nine hudred mm, laboratory chair medium rise with ring with castors wheels, back rest lab stool with castors wheels, cwbs-ns biosafety cabinet consisting of class ii a2 , cwbs-s biosafety cabinet consisting of class ii b2 , cwlf-v laminar flow cabinet vertical for research, cwlf-v laminar flow cabinet vertical for teaching, cwlf-anr anaerobic workstation, gas piping system consisting of cylinder holding bracket, gas piping system consisting of ss braided pigtail w safety rope, gas piping system consisting of cylinder manifold system, gas piping system consisting of dual stage regulator w relief valve, gas piping system consisting of non return valve, gas piping system consisting of half inch od x half inch bsp adapter, gas piping system consisting of half inch od ss tube, gas piping system consisting of half inch od union, gas piping system consisting of half inch od union tee, gas piping system consisting of reducing tee, gas piping system consisting of half inch od ball valve, gas piping system consisting of one quarter inch od ss tube, gas piping system consisting of one quarter inch od union, gas piping system consisting of reducer, gas piping system consisting of micron filter, gas piping system consisting of gas purification panel, gas piping system consisting of gas control box, gas piping system consisting of point of use regulator, gas piping system consisting of pp clamp w profile, gas piping system consisting of pp clamp w profile size one quarter inch od, gas piping system consisting of misc fittings, gas piping system consisting of gas bank shed, gas piping system consisting of vacuum pump

State Government

CTN :39049488

15 Feb, 2025 49.92 Lacs

Guwahati - Assam

Tender For procurement of machinery/equipment for institute of veterinary biologicals - microscope :head: binocular 30 . 360 rotating. 48-75mm interpupilar. +/- 5mm diopter on left tube, objective magnification:semi plan 4x/0.10, 10x/0.25, s40x/0.65, oil immersion objectives, eyepiece magnification: wf 10x/18mm, -80 c ultra low temperature freezers:temperature range : -60 c to -86 c, volume : 528 l, compressor capacity 950w, compressor type/brand/number-hermetic reciprocating type / secop / 2, condenser type- enhanced micro-channel & forced-air cooled, defrost method-manual, evaporator type-cold wall with enhanced heat transfer treatment refrigeration system type-direct cooling, refrigerated centrifuge machine :max. speed 16000 rpm, rotor : 1.5 ml/ 2 ml. , 15 ml. & 50 ml., freeze dryer machine: condenser temperature : -40 c, freezer drying area : 12 liters (0.118m3), condenser capacity : 3 - 5 ltr /24hrs., vacuum degree : 10 pa, drying chamber (ss-304) : stainless steel 230mm (dia) x 285mm (d), cold trap dimensions : (ss-304) 230mm (dia) x 230mm (d), vacuum probe :electric vacuum transducer, vacuum indicator :digital vacuum indicator, vacuum seals : made of silicon rubber, ultra ultimate vacuum (pump head) :1x 10 torr, vacuum pump direct drive motor rotary vane type vacuum pump of double stage with air ballast having ultimate vacuum of 1x10-2 torr on pump head, manifold/numbers of ports : one manifold with 8 ports,ability to hold flasks :1000ml, 500ml, 250ml, 100ml., ambient conditions :ambient temperature 25 c (ac room), voltage :220v, 50hz, power : 1400w, co2 incubator :capacity (english) 6.5 cu. ft., certifications/compliance ul, cul, ce, data outputs usb, and optional 4-20ma, description single tri-gas 184l incubator, 1-20%, capacity (metric) 184 l, chamber material polished stainless steel, co2 concentration range 0 to 20%, co2 sensor technology tc sensor, lighting led, material stainless steel, oxygen control 1 to 20%, relative humidity 90% at 37 c, temperature range (metric) ambient +5 to 50 c, type co2 incubator, dimensions (d x w x h) interior 20.0 x 21.3 x 26.8 in. (50.8 x 54.1 x 68.1 cm), dimensions (l x w x h) 25 x 26 x 39.5 in. (63.5 x 66 x 100.3 cm), weight (english) 365 lb. electrical requirements 230 v, 50/60 hz, voltage 230 v, unit size each, laminar flow ( vertical ):inner working size : 2 ft x 2 ft x 2 ft. with hepa filter., blower system: - direct drive, continuous duty hp with sealed bearings motors selected for energy efficiency, compact design, and flat profile. completely integrated assembly optimizes motor cooling. all rotating parts balanced for smooth, quiet and vibration-free operation. pre filter system: washable type pleated pre-filter with 90% efficiency is provided. hepa filtration system: - aluminium framed high efficiency particulate air (hepa) filter operate a typical efficiency of 99.97% at 0.3 micron size, provides superior product protection. material of construction: 18 gauge mild steel (ms) material with working area ss non corrosive material., dry bulb thermometer:temperature range -10 to 50 degree celsius, vortex mixer : vortex mixer (adjustable speed), with standard cup top, 115v/60hz, speed 0-2500rpm; orbit 4mm; touch or continuous operation; shade pole motor; analog control, auto filling machine:glass/plastic type of product; 2400 bottle/hr production;50-100 ml filling volume, auto capping machine:round type container; screw cap; 40 bottles/minute production, auto labelling machine:stainless steel finish; round bottle type ; bottle size -30 ml to 500 ml; cold dextrin base glue; 150 labels/minute;, mini cooler :20 c mini cooler with gel filled cover, code-525062, places-32, capacity-1.5, tissue homogenizer:interface-touch screen interface, programmable assays- up to 12 manual assays saved to memory, pre- defined assays- 73 pre-defined and optimized assay programs,time range- 1 to 120 seconds in 1 second increments, speed range- 4 to 10 m/sec in 0.5m/sec increments, cycles- 1 to 9 cycles

State Government

CTN :39049502

13 Feb, 2025 40.00 Lacs

Kamrup - Assam

Tender For supply of various items for the dhr project entitled molecular biology applications research and diagnostic techniques - laboratory items, pc based true double beam uv-visible spectrophotometerspecification:1. optical system: czerny-turner mounting, single monochromator, double- beam system, 1,300 lines/mm, 240 nm blazed holographic grating 2. light source: deuterium lamp and tungsten-halogen lamp 3. detector: r-928 photomultiplier tube 4. wavelength range: 185 to 900 nm or higher 5. wavelength accuracy: 0.1 nm (656.1 nm) 6. wavelength repeatability: 0.05 nm 7. spectral bandwidth: 0.1, 0.2, 0.5, 1, 2, 5 nm in steps 8. resolution: 0.1 nm 9. stray light: max. 0.005 %t (220 nm nai) 10. mode: abs, %t, %r, 11. photometric range: -5 to 5 abs12. noise level: 0.00003 abs rms (500 nm) 13. wavelength slew rate: 14000 nm/min 14. wavelength scan rate: 4000 to 0.5 nm/min 15. below items must be supplied along with the main instrument:a) one pair of cuvettes, 10 mm path length, 3.5 ml volumeb) integrating sphere attachmentwavelength range: 220 nm to 850 nm or betteri) samples like powder, solid, colloidal sample, thin film etc are measured by using thisaccessoryii) minimum inner diameter of integrating sphere: 60 mmc) branded i5 pc with original os- 1 no, class ii, type a2 bio-safety cabinetspecification: 1. the bio-safety cabinets should be 4 feet width with front window must be a 10 sash opening and steel with smart coat interior 2. the bio safety cabinet must include dc motors. 3. the motor must automatically adjust the airflow speed without the use of a damper to ensure continuous safe working conditions, even without maintenance adjustments. 4. cabinet must use a pressure sensor (rather than anemometer) to detect pressure drop across the supply filter, rather than in just one point across the down flow. 5. the cabinet should display the inflow and down flow air velocities and must incorporate an led indicator, visual & audible alarm to indicate excessive hepa filters loading, blower failure, airflow speed failure, incorrect window position. 6. the front of the cabinet must be angled 10 to help minimize glare. 7. the cabinet noise level must be less than 65 db(a) for a 4-foot cabinet. 8. cabinet with lights on and fan at operating speed should consume less than 400 watts or less 9. the cabinet must automatically reduce fan/blower motor speed to 30% when the front window sash is in closed position to ensure reduced energy consumption when the cabinet is not is use. 10. uv light must be programmable to allow for specific exposure times from 0 to 24 hours. 11. the cabinet should have provision to fit taps for vacuum, water and non-combustible gas. 12. the bio safety cabinet should be nsf certified with listing on nsf website. 13. the bio safety cabinet should incorporate hepa filter of the class h 14 en 1822 or better and having minimum efficiency of 99.995% at 0.3 m particle size. 14. ventilation system exhaust and inflow air volume approx 300-350 cfm 15. audible and visual alarms for hepa filter failure, blower failure, airflow speed failure, incorrect window position. 16. the cabinet should be provided with fixed / adjustable height stand, uv light and one set of detachable arms rest and one / two electrical outlet. 17. the drain pan of the bsc should be made of stainless steel. the drain pan should not be painted, or power coated. 18. cabinet should be ce certified and declaration of moc should be provided. 19. port provision for clean and safe routing for vacuum tubing and cables throughthe side of the bsc for improved organization and work efficiency., vacuum ovenspecification: 1.volume(l): 60-802.temperature range ( c): rt+5-2503.temperature resolution ( c): 0.1(at 100 c)4.temperature variation ( c): (at100 c)5.heating power (w): 21006.vaccum range 0 ~ 1 atm7.timer: 1min ~ 99hr59min8.vaccum connector (mm): 109.venting connector (mm): 1010.inner size (mm): 400x400x40011.dimension (mm): 625x585x710, constant temperature incubators

Central Government/Public Sector

CTN :38549897

31 Jan, 2025 2.59 Crore

Aizawl - Mizoram

Tender For corrigendum : supply of group tender of medical equipment for histopathology, pathology, microbiology and blood bank dept. - grossing station automated , microtome- fully automated , lab incubator , hot air ove , ph meter , hot plate , semi automatic microtome , esr analyzer , embedding station with hot & cold table & paraffin dispenser , tissue floatation bath , lab refrigerator , electronic balance , slide filing cabinet , block filing cabinet , centrifuge , microscope binocular , microscope binocular with illumination & photography , hematology analyzer-3 part , semi automatic coagulometer , fully automated coagulation analyzer , elisa reader with washer , vertical gel electrophoresis system , ultra deep freezer -80 deg c , cytospin , blood donor couch , blood collection monitor , dielectric tube sealer, handheld , refrigerated blood component transport box , (-40) degree deep freezer , vertical deep freezer - 20deg , ultra high speed centrifuge , plasma thawing bath , blood bank refrigerator , blood bag weighting balance- single pan , water bath , blood gas analyser , autoclave , bacteriological incubator , co2 incubator , anaerobic incubator , laminar air flow , bio safety cabinet class ii type b2 , ultrapure water purification system , fully automated colony counter , technical specification for compound microscope for microbiology

CTN :38748807

31 Jan, 2025 16.01 Lacs

Beawar - Rajasthan

Tender For supply installation and commissioning welder trade items of iti for imc of iti beawar rajasthan - a. trainees tool kit, welding helmet fiber, welding hand shield fiber, chipping hammer with metal handle 250 gm, chisel cold flat 19 mm x 150 mm, centre punch 9 x 127 mm, dividers 200 mm, steel rule 300mm, scriber 150 mm, tongs flat 350 mm, hacksaw frame fixed 300mm, file half round bastard 300 mm, file flat 350 mm bastard, hammer ball pane 1000 gm with handle, tip cleaner, try square 150 mm, b. instruments and general shop outfit, spindle key, screw driver 300 mm blade, screw driver 250 mm blade, number punch 6 mm, letter punch 6 mm, magnifying glass 100 mm dia, universal weld measuring gaug, spanner d.e. 6 to 32mm, c-clamps 100 mm, c-clamps 150 mm, hammer sledge double faced 4 kg, s.s tape, h.p. welding torch with 5 nozzles, oxygen gas pressure regulator double stage, acetylene gas pressure, co2 gas pressure regulator with flow meter, argon gas pressure regulator with flow meter, flash back arrester (torch mounted), flash back arrester (cylindermounted), multiangle magnetic clamp set, general shop outfit, welding transformer with all accessories ( 400amp., o.c.v. 60 100 v, 60% duty cycle), welding transformer (or) inverter based welding machine (igbt), d.c arc welding rectifiers set with allaccessories, ac/dc gtaw welding machine, air plasma cutting equipment, air compressor suitable plasma cutting system. for above air, auto darkening welding helmet, spot welding machine, portable gas cutting machine (pug), pedestal grinder fitted with coarseand medium grain size grinding wheels, bench grinder fitted with fine grainsize silicon carbide green grinding wheel, ag 4 grinder, hand shearing machine capacity to cut 6 mm sheets and flats, power saw machine, portable drilling machine electric (cap. 6 mm), oven electrode drying 0 to 350 c, 10 kg capacity, vice bench 150 mm, oxy acetylene gas cutting blow pipe, oxygen cylinders, acetylene cylinders, co2 cylinder **, anvil 24 sq. inches working area withstand, magnetic particle testing kit, fire extinguishers foam type, fire extinguishers co2 type, portable abrasive cut-off machine, welding simulators for smaw/gtaw/gmaw

Central Government/Public Sector

CTN :38740919

15 Mar, 2025 NA

Duliajan - Assam

Tender For expression of interest for the items- crome casing pipes , chrome tubing pipes , drill pipes , heavy weight drill pipe , drill collars and lifting plug , drilling stabilizers , drilling/ workover handling tools --- elevators, tongs, , slips etc. , potassium formate , solid control equipment --- mud cleaner/ degasser/ , centrifuge/ linear motion shale shaker , sucker rod pump (srp) and its accessories , srp insert pump , ethyl mercaptan , low shear velocity fluids/polymers , emd chemical dosing pump, reciprocating pump , hsp 20/40, isp 20/40, isp 30/50 mesh , pig tracker/transmitter , pipeline locator , logging cables , tri cone roller drilling bits of various sizes , 11"od standard reverse circulating junk basket & 7.7/8" od reverse circulating junk basket , pdc drill bits of various sizes , fishing tool; 6.5/8 inches od junk sub for operation inside 8.1/2 inches hole , impression block for 4.5 inch od, 5.0 inch od, 9.625 inch od & 13.375 inch od casing , pneumatic spinner , 5.1/ 2" premium threaded casing (grade: n80 & grade p110) , cased hole logging units with tools and accessories along with installation, commissioning and training , wireline mast unit, including training and installation& commissioning , oil well explosives: (i) 2-1/8 inch tubing cutter along with detonator and hardware accessories , ii) 1-9/16 inch tubing puncher/ circulation charge & hardware accessories , oil well explosives: explosives for baker pressure setting tools: power charge, primary ignitor & secondary ignitor , procurement of oil well explosives used in exploration and production of hydrocarbon , 27.1/2" (698.50 mm) rotary table , 7.1/16" x 10 m double ram bop with accessories , 13.5/8" x 10 m single ram bop with accessories , 3.1/16" x 10 m flexible steel hoses for choke manifold , 3.1/8" x 5 m flexible steel hoses for choke manifold , 2.1/16" x 5m - ss flexible steel hose 3.1/16" x 10m - ss flexible steel hose , 3.1/8" x 5m flexible steel hoses , thermal wellheads for 7" and 9.5/8" casing completion with installation & commissioning , hose vibrator , rotary hose, drilling in assorted length , 2.34 mm (0.092") piano wireline (well measuring line) , static gel strength analyzer , electronic reservoir pressure and temperature measuring gauge. , automatic distillation apparatus , ft ir spectrophotometer , rheometer , 350 short ton drilling hook & elevator links (250 short ton, 350 short ton and 500 short ton) , digital acoustic liquid level measuring cum dynamometer equipment (echometer) , cross over, premium box x api eue & pup-joint, 2.7/8", premium in assorted length , geological thin section preparation unit comprising of cutting, vacuum impregnation, grinding and polishing equipment and consumables. , polarised microscope , pony drill collar , premium tubing , 37.1/2 rotary table , air gas permeameter , double block and bleed isolation plug , gas chromatograph , low to moderate temperature cement retarder , high temperature fluid loss control cement additive , xcd-polymer , xc-polymer (premium) , poly anionic cellulose-regular , poly anionic cellulose-super lo , junk sub 5.1/2 inch & 7 inch , 13.5/8-inch x 10000 psi annular bop , 13.5/8-inch x 10000 psi double ram bop. , ct reels , super fishing jar , drilling jar , overshots , slammer logging cables , 3 left hand kelly , multi element analyzer , high performance ep lube , mercury free pvt system , surface memory gauge , accessories of logging cable , downhole pressure temperature gauge , real time kinematic differential global positioning system , flow assurance software , seismic survey designing and modelling software , low to moderate temperature fluid loss control cement additive , high temperature cement retarder , cement friction reducer , isotope ratio mass spectrometer , fishing tool 6.75 od, axial vibrational, shock absorbing tool , 8 od, axial vibrational, shock absorbing tool , tubing stripper , nano-graphene based lubricant , tubing retr

CTN :38728181

30 Jan, 2025 2.92 Crore

Rohtak - Haryana

Tender For rate contract for two year (extendable) for the purchase of various types of consumable for department of anaesthesiology, pgims, rohtak - : hepa bacterial and viral filter, with hme properties offering optimum hydrophobic filtration performance. gas sampling port, for end tidal co2 monitoring. recommended tidal volume range 150-1200ml.even- pleated filter medium to allow maximum filtration efficiency with minimal resistance to flow. low dead space, not more than 45-55 ml. single use, sterile., heat&moisture exchangers (hme) filter for pediatric use: recommended tidal volume <600ml.low weight. low dead space. suitable for both ventilated and spontaneously breathing patients. low resistance to flow. corrugated paper medium with high efficiency to recover about 75% of the energy and moisture. single use, sterile. heat & moisture exchangers (hme) for spontaneously breathing in tracheostomized patients. suction port to allows access to suction catheter. clear housing to allow visualization of contamination. integrated oxygen port to allow delivery of supplemental oxygen. recommended tidal volume range from 70- 1000ml.compact and lightweight. corrugated paper medium device can be used for a maximum period of 24 hours. single use sterile. minimum resistance anti occlusive mechanism. epidural set. a set containing tuohys epidural needle minimum length 80 mm, 16g, 17g and 18g, and corresponding gauge epidural catheter with closed tip and three lateral eye, length 90-100 cm and flat filters 0.2 micrometer hydrophilic two way, filter area approx 4.91 cm, priming volume 0.75 ml all connections should be of luer lock type, lor(loss of resistance) syringe, presterilized. ece marked/usfda approved combined spinal epidural set. containing 18 g touhy epidural needle of minimum 80 mm length. pencil point, spinal needle with twist lock system, marking on tuohys needle hub and depth marking on tuohys needle hub containing corresponding clear catheter with connection, closed end and 3 lateral eye of approx. length 90-100 cm with epidural filter 0.2 micrometer hydrophilic two way, epidural sponge and lor (loss of resistance) syringe. ece marked/usfda approved needle for spinal anaesthesia, quincke type, same colour coding on the hub and stylet, presterilized. usfda and europen ce approved (a) 23 g, 90mm length od approx 0.64 mm, (b) 24g,90mm length od approx 0.5mm with/without introducer (c) 25g, 90 mm (d) 26g, 90 mm (e) 27g, 90mm paed. spinal needle without introducer, colour coded length 50mm, 25 g. od 0.5 mm, presterilized. usfda and europen ce approved

Noise Figure Meter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector