Latest non destructive testing Tenders | Government non destructive testing Tenders

Central Government/Public Sector

CTN :39837273

07 Apr, 2025 NA

Vadodara - Gujarat

Tender For supply of non destructive testing penetrants

Central Government And Public Sector

CTN :39792309

02 Apr, 2025 26.37 Lacs

Palghar - Maharashtra

Tender For detailed condition assessment by non-destructive testing or partial destructive testing of biological shield of primary containment unit _ 1 and unit _ 2 at tarapur atomic power station 1and2.

Central Government/Public Sector

CTN :39370529

26 Mar, 2025 16.00 Lacs

Dediapada - Gujarat

Tender For bid to ras providing of selection of laboratories for testing of products/material - machine required in laboratory for biochemistry tests; buyer to use custom filter to input technical specification of the product/material so that service provider may provide price offeri..

State Government

CTN :39340324

07 Apr, 2025 NA

Bhubaneswar - Odisha

Tender For corrigendum : supply, installation and commissioning of 9 nos non destructive testing equipment for setting up of non destructive testing laboratory under the state of art laboratory in rd and qp, rand b wing, works department, government of odisha

Central Government/Public Sector

CTN :39664774

01 Apr, 2025 NA

Jabalpur - Madhya Pradesh

Tender For supply and installation testing & commissioning of tower air conditioner unit nominal co oling capacity 04 ton/12000 kcal/ per hr. or 48000 btu/hr. floor standing type split air conditioner, su pply voltage 3 phase 415 volt +/- 5% ac, 50 hz. (technology of ac fixed speed cooling only) coil mater ial copper, eco friendly refrigerant, refrigerant 410 (a) or r-32 with outdoor and indoor unit, coil materi al (evaporator) / (condenser) : copper cooling only, conforming to is: 1391 with wireless remote with battery. make : blue star , lg, hitachi, daikin, lloyd, haier or similar a certificate that the material has been purchased from the oem/authorized dealer of oem by the firm with guarantee/warranty certificate to be submitted at the time of supply. the warranty/guarantee of complete machine is 12 months from the date of installation of ac unit. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :39631100

25 Mar, 2025 4.78 Lacs

Rajkot - Gujarat

Tender For cr to providing destructive testing & non destructive testing at block no. c1 to c11, 96 clerk quarter colony at rajkot

CTN :39605898

27 Mar, 2025 NA

Mysore - Karnataka

Tender For tender for supply of safety material - item description wind socks type n a material double linen cloth size n a protection waterproof colour n a additional information safety item parachute for long lasting that can sustain in all kinds of weather , item description hand glove type low temperature material rubber size n a protection n a colour n a refer attachment for specification , item description hand gloves , 11kv type n a material rubber size n a protection n a colour n a application insulation additional information standard is 4770 working potential 11000 v , testing potential 33000 v , with applicable certificates , quantity mentioned in the tender enquiry is only indicative. actual quantity ordered shall be determined at the time of monthly maintenance and shall be advised by hpcl. , sup 33.0kv rubber hand gloves_ for detailed description , refer schedule of quantities , item description latex gloves _100 pcs per packet_ type powdered and medical examination material n a size n a protection n a colour n a beaded cuffs to ensure easy removing and wearing. pre powdered with bio absorbable corn starch , item description nitrex gloves _100 pcs packet_ type n a material n a size n a protection n a colour n a 100 percent seamless machine knit polyester shell offers flexibility and form_fitting comfort offering unparalleled grip and protection in oily conditions coated gloves cut resistant gloves and cut resistant sleeves , item description hand gloves material asbestos size 14 in leather_crome_ , _k_21 quality_hand gloves with inside leather lining_065_05225 30_ , quality with inside cotton lining.the glove to offer protection aganist abrasion , suts and specific temperature , item description hand gloves type semi_round , thumb lined material canvas leather size 10 in full split leather palm , white elastic wrist , double stitched , item description hand gloves material polyvinyl chloride size 18 in colour yellow with fabric lining , supply cotton hand gloves for maintenance purpose is 8519 1977 , item description goggles , panoramic view type panoramic view protection chemical splash protection acceptable models 1_ ud 39 2_ uee 161 3_ nautilus 2100hc 4_ 3m 1621 5_es 009 for protection against chemical liquids _amp splashes as well as dust with the , item description goggle type protective material n a size n a protection uv protection colour n a light weight , ce marked and protection against dust and flying objects , fumes etc , item description smoked dark goggles , ud 50 type anti fog plain material polycarbonate acceptable models m 1712 , nautilus 1066 , uee 121 , es 001 with the following specifications light weight protective goggles with polycarbonate wrap around frame , with ant , item description goggles , uee 132wg type electric arc welding acceptable models es 004 or with the following specifications goggles for electrical arc welding with soft , heat resistant , pvc or polycarbonate frame offering snug fitting.the lens should be ir , item description goggles type gas cutting specifications snug fit bocal goggles of heat resistant pvc frame with ventilation.it is fitted with spinter proof lens of shade no 7 and with adjustable non slip elastic head band of min.10 mm width.the goggle , item description ear plug type n a material pliable rubber size n a protection n a colour n a manufacture 3m venus karam , meeting attached technical specification , item description ear muff type universal material n a size n a protection n a colour n a additional information sound level 135 dba make 3m or venus h 550 or karam ep 21 meeting attached technical specification , safety shoes confirming to is 15298 _part ii_ 2011 and bearing is mark , sole should be antistatis , oil resistant , water resistant and acid resistant. shoes should be made with polyurethane sole fixed by direct injection process. metal should not be used in shoe construction except for toe cap and eyelets , item description safety helmet material hdpe of

Central Government/Public Sector

CTN :39594799

27 Mar, 2025 7.37 Lacs

Dharwad - Karnataka

Tender For procurement of gym equipment at hubballi airport fire station -supply, installation, testing and commissioning of (sitc)6- stationmulti gym with 4 stack including mandatory exercise provision oflat pull down, mid row, chest press, shoulder press, multi press, legcurl, leg extension, additional exercise leg press, pec fly/ rear belt ,leg raise, chin dip, material of frame: cold rolled mild steel, framefinishing: 2 layer electrostatic coating, frame thickness:3mm ,pipeshape: rectangular,cable:5 mm thick & nylon coated, adjustablepulley diameter:3 inch, adjustable pulleys type: "v" groovedfiberglass impregnated nylon pulleys with sealed bearing, bearings:precision-machined bearings, grip assemblies: narrow grip, thicknessof seat: 2 inches, cushioning type: foam padding, cushioningmaterial: foam, number of weight stacks to be supplied along withthe machine:2, weight of each stack (in kg): 90 kg, length:350 cm ,width: 250 cm, height:230 cm, machine weight with stacks (in kg):450 kg etc. complete as required in assembled condition includingtransportation up to aai site location , sitc of heavy duty commercial treadmill with max speed 25kmph, 4hp motor, maximum user weight 200 kg, incline range(degree): 20, display read out: time, speed, distance, incline,calories, pulse/heart rate, console/display type: tft touch screen,display size: (in inch) 18.5, keys on console: instant speed, incline key,program, minimum number of programs: 24, power drive electricity ,material for frame: mild steel, material for side foot rail: mild steel,material for roller: mild steel, material for console: abs (acrylonitrilebutadiene styrene), length of treadmill :80 inch, width oftreadmill:30 inch, height of treadmill: 58 inch, running length (ininch): 69 to 72, running width (in inch): 25 including training fortechnical staff and support services with the system, with essentialfeatures of heart rate monitor, calorie count feature, shockabsorption, provision to control/set speed, provision toincline/decline, wheels for easy transportation, with additionalfeatures of auto lubrication, reversible deck, recovery pattern,mp3connectivity, fan, bluetooth, usb, wi-fi, pulse sensor on hand rails,plane damping system, fitness test, emergency stopper with safetykey mechanism to ensures high degree of user's safety etc. completeas required in assembled condition including transportation up to aaisite location. , sitc of multi bench (incline, decline & flat) with bar holder, type ofbench: flat incline decline, machine length:162 cm ,machinewidth:60 cm, machine height:54 cm, machine weight :45 kg, materialof frame: colled rolled mild steel, frame finishing/coating:2-layerelectrostatic powder coating, pipe shape: oval, thickness:15 gauge,material of frame: colled rolled mild steel, framefinishing/coating:2-layer electrostatic powder coating, pipe shape:oval, seat and backrest material: foam padding, upholstery material:foam, seat and backrest thickness :2 inch, with provision of adjustableseat and back rest, 3 position seat pad adjustment, back padadjustment:30 degrees, with provision of abs rubber feet for floorprotection etc. complete as required in assembled condition includingtransportation up to aai site location , sitc of double bar with pulls ups with max user weight 150 kg,product weight:200 kg, weight stacks:91 kg, height:220 cm,width:136 cm, solid-steel weight plates, heavy-duty belt system,length:122 cm, plate capacity (per rod):10 kg etc. complete asrequired in assembled condition including transportation up to aaisite location , sitc of squat rack with material of frame: colled rolled mild steel,frame finishing/coating: 2-layer electrostatic powder coating, pipeshape: rectangular, thickness: 3 mm,machine length:178 cm, machine width:168 cm, machine height:180cm, machine weight (in kg) 150 kg etc. complete as required inassembled condition including transportation up to aai site location , sitc of abdominal bench with material of frame of abdominal b

Central Government/Public Sector

CTN :39550362

02 Apr, 2025 NA

Coimbatore - Tamil Nadu

Tender For lock rod in sets for point m/c-220mm stroke point machine. each set comprising of 1) lock rod ( rh) to drg.no.rdso/s.11006 alt- ptj/7 :- 1no 2) lock rod (lh) to drg.no.rdso/s.11007 alt- ptj/7:- 1no each l ock rod rh & lh shall be supplied with 2 nos of nut ms hex m24x3mm pitch to is:1364 part-3, 2 nos of lock n ut ms m24x3mm pitch to is:1364 part-4, 2 nos of washer ms punched m24 to is:2016 type-a and 2 nos of spri ng washer b24 to is:3063. all these fasteners are to be supplied in assembled condition and shall be zinc plat ed to grade fe/zn 25 to is:1573 and yellow passivated to is:1340. ultrasonic testing to be conducted by the s upplier on lock rods to ensure the material is free from internal cracks/defects and for proof of this, test certific ate from reputed testing labs shall be enclosed along with each supply. [ warranty period: 30 months after t he date of delivery ]

Central Government/Public Sector

CTN :39550314

02 Apr, 2025 NA

Mumbai - Maharashtra

Tender For supply of non destructive testing penetrants tois:12889-2018- group 'i', consisting of cleaner/remover, penetrant & nonaqueous wet developer in the ratio of 1:1:2. packing in set: each set comprising of three items (1) cleaner/remover (2) penetrant & (3) developer to be supplied in four aerosol cans of capacity 500 ml each in the ratio 1:1:2. the material content in each aerosol can should be 80 % (+/- 3) by volume & the ratio of the product to the propellant is 3:1 (+/- 3% ). [ warranty period: 18 months after the date of delivery ]

Non Destructive Testing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors