Latest non linear editing system Tenders | Government non linear editing system Tenders

Central Government/Public Sector

CTN :39607694

04 Apr, 2025 NA

Morbi - Gujarat

Tender For corrigendum : instruments - adapter for ultrasound digital fetal doppler, 1 no., 4, adult colonoscope, 1 no., 8, aluminum walker adjustable, 1 no., 12, artery forcep 6" curved, 1 no., 16, autoclave vertical: model : ac123 , lab tech -should be fully automatic vertical autoclave for total destruction of all living microorganisms-pressure adjustable from 10psi to 20psi with an accuracy of +/- 1 to 3 psi, with automatic pressure control switch-outer and inner chamber made up of stainless steel-size of the inner chamber:- 50 x 75 cm (diameter x depth)-should be providing 2 carriers of stainless steel. size of the carriers should be 35-40 x 30-35 cm ( x d)-should be provided with silicon/ rubber/ neoprene gasket-lid should be stainless steel and should be fitted with pressure gauge safety valve manual exhaust valve vacuum breaker ports of calibration check-all the hinges should be of stainless steel-should be provided with stainless steel heated cover stand-drain valve at bottom for draining the water-electrically heated-micro processor controller based system to provide digital display of cycle processes like temperature, pressure-should be provided with low water level alarm and cut off-automatic pressure control switch- to cut off the current from the heating elements, when the desired/ set pressure value level is attained inside the chamber and restarts the mechanism once the pressure inside the chamber falls from the desired level-should be fixed with chart and data recorder-iso/ ce marked -should provide test certificates, calibration certificate and traceability certificates for temperature and pressure gauges-the downtime of the equipment must not be more than 10 days annually and system must be made functional within 48 hours of breakdown and in case of such incident the period of breakdown will not be counted while calculating warranty or cmc period. if the downtime during any year is more than 10 days a penalty at the rate of 0.1percent of the cost of the equipment will be levied for each extra day of downtime.-operation manual with user demonstration video cd (with sop in guajarati), 1 no., 20, b.p. instrument digital, 1 no., 24, binocular microscope, 1 no., 28, bolster size large, 1 no., 32, bp instrument (mercury), 1 no., 36, c p chair (wooden + metal), 1 no., 40, centrifuge machine, 24 tube digital display & 5000 rpm, 1 no., 44, chital forcep 10", 1 no., 48, cold light source cable, 1 no.

CTN :39643331

16 Apr, 2025 NA

Shimla - Himachal Pradesh

Tender For corrigendum : procurement of machinery and equipment on behalf of directorate of health services hp - cardiac monitor, high pressure high speed horizontal steam instrument sterilizer, phacoemulsification unit, fess endoscopy unit, ent operating microscope, oae(clinical), ent workstations /treatment unit, shaver system cum micro drill, digital mammography unit, analogue mammography machine, computed radiography system for mammography, electro hydraulic operation table for orthopaedic surgery, surgical instrument set (ortho), autopsy(mortuary)table, mortuary cabinet (6- body), laparoscopic set with instruments, ctg machine, delivery table(obstetric labour table), foetal doppler, multipara monitor (obg), video colposcope, suction apparatus, autoclave horizontal, autoclave vertical, autoclave ot automatic, multi-channel electrocardiographic, fogging machine for ot (fumigator), crash cart trolley, infusion pump, retinoscope, indirect ophthalmoscope, electric cautery, laryngo-laryngoscope, digital otoscope, head light(ent), power drill for ortho, power saw for ortho, harmonic scalpel, laparotomy set, single puncture laparoscope for tubal ligation, spot light, note :-1.the basic price of the goods to be quoted without gst.2.all the prices should be quoted in indian rupee (inr) only.3.the cmc should be quoted year wise without gst.4.cmc rate and turnkey work (if any) shall be included for determining l-1 bidder.5.gst shall be payable as applicable from time to time.6.charges towards packing & forwarding, inland transportation, insurance (local transportation and storage) would be borne by the supplier from warehouse to the consignee site, loading/unloading and other local costs incidental to delivery of the goods to their final destination as per section-i shall also be borne by the supplier.7.the price should be inclusive of supply, installation, commissioning charges.8.l-1 will be determined item-wise on total basic price of the equipment (all inclusive) (excluding gst) + total cmc (if any) (excluding gst) + turnkey work (if any) (excluding gst) for all the items as mentioned in section-i.9.in case of optional accessories/items (if any), rates may quoted in separate pdf file (along with the price bid), which will not be considered for determining l-1 bidder. it is reiterated that the bidder should not submit this in the technical bid.it is certified that the cost of goods shown above, is all inclusive except gst.signature of authorizedsignatory with seal

CTN :39130794

28 Mar, 2025 NA

Dehradune - Uttarakhand

Tender For bid to ras corrigendum : supply of bullet camera 5mp , dome camera 5mp , server rack 42u , workstation for display , server with license pack , network attached storage device , video management software , layer 2 access switch , cat 6 patch panel , cat 6 patch cord , cat 6 cable , workstation for biometric and rf machine , access control bio metric machine with software including all accessories , radio frequency identification workflow rfid card

Central Government/Public Sector

CTN :39773502

31 Mar, 2025 NA

Delhi - Delhi

Tender For providing of e-learning content development - igot; storyboarding and conversion of content to multimedia formats; hindi, english; mobile and laptop/desktop both; management, education and skilling; type of content; na; animated video -motion graphics; machine, s..

CTN :39643329

09 Apr, 2025 NA

Shimla - Himachal Pradesh

Tender For corrigendum : procurement of machinery and equipment on behalf of national health mission - ot table, anaesthesia work station, defibrillator, phototherapy unit, x-ray mobile, x-ray machine 500 ma, x-ray machine 300 ma, colour doppler ultrasound machine, hysteroscopy set, manual vacuum extractor, radiant warmer, cpap, mobile c-arm machine (image intensifier), ot light (shadowless lamp ceiling type major), video laryngoscope, flash autoclave, washer disinfector, examination treatment light, pulse oximeter, line powered beside neonatal, surgical diathermy bipolar, note :- 1.the basic price of the goods to be quoted without gst.2.all the prices should be quoted in indian rupee (inr) only.3.the cmc should be quoted year wise without gst.4.cmc rate and turnkey work (if any) shall be included for determining l-1 bidder.5.gst shall be payable as applicable from time to time.6.charges towards packing & forwarding, inland transportation, insurance (local transportation and storage) would be borne by the supplier from warehouse to the consignee site, loading/unloading and other local costs incidental to delivery of the goods to their final destination as per section-i shall also be borne by the supplier.7.the price should be inclusive of supply, installation, commissioning charges.8.l-1 will be determined item-wise on total basic price of the equipment (all inclusive) (excluding gst) + total cmc (if any) (excluding gst) + turnkey work (if any) (excluding gst) for all the items as mentioned in section-i.9.in case of optional accessories/items (if any), rates may quoted in separate pdf file (along with the price bid), which will not be considered for determining l-1 bidder. it is reiterated that the bidder should not submit this in the technical bid.it is certified that the cost of goods shown above, is all inclusive except gst.signature of authorizedsignatory with seal

CTN :39538711

28 Mar, 2025 NA

Barnala - Punjab

Tender For corrigendum : supply of d related armament ite - blasters ohmmeter 0-200 ohms , 9 volt cell for blasters ohmmeter , eod ballastic protection eye wear , repeater for portable vhf synthesiser transreceiver , still camera digital with stand , digital video camera with stand , portable vhf synthesiser transreceiver , pipe adjustable wrinch large , alluminium foil , hand held gps , seat cutter , gloves , eod wrist watch , 9v 9ah battery for blasting machine , eod folding pocket knife , micro ringing single pulley , cream scrubber , hand crank plastic wheels , plastic vials , rigging rope , tinmen snip straight and bent , hydration back pack , iron stacks , parachute chord , multipurpose water pump for above and under water , banners bd team , dry cell , seats timer , mono filament tape 1 inch , electrical wire , friction tape , bungee chord , protector , safety digital multimeter , d91 items , drift copper , scratch card , digital thermometer , nut sequenzer , guages detonator cavity

CTN :39342632

15 Apr, 2025 4.67 Crore

Amravati - Maharashtra

Tender For corrigendum : selection of system integrator for supply, establishment, operation and maintenance of center of excellence on digitalization through simulation at government college of engineering ,amravati - hardware part, battery charge and discharge test system, data acquisition and logging system, thermocouple/ rtd for temperature measurement, battery tester for internal resistance testing, electric vehicle bldc motor training system, bldc (brushless) inner rotor brushless dc motor coupled with dc shunt motor to study the load characteristics and study of drive parameters, battery characteristics training system, pmdc motor training system, power and transmission system study models for ev application, pmsm motor coupled with dc generator test bench setup, switched reluctance motor coupled with eddy current dynamometer test bench setup, pwm charge controller training system:, sectioned electric vehicle two-wheeler chassis, sectioned electric vehicle four-wheeler chassis, battery resistance spot welding machine, dc /ac clamp meter, non-contact type tacho meter, computing workstations for ev design and simulation, multi-body dynamics analysis research software bundle for ev (10 user), power train/ gearbox design research software package, 1d+3d thermal modelling, bms modelling, electric motor, ic engine modelling research software package, multi-physics cae research software package with battery modelling and analysis capabilities, nmc cell ( size 18650), nmc cell ( size 26650), lfp cell, smart bms training system, electric vehicle scanner, diy kits for 20 students, advanced driver assisting system (adas) training system for e-mobility, ac ev charger 10kw, dc fast charger: 20kw, multifunction installation tester, electric vehicle service equipment test adapter kit, battery tester with inbuilt printer, digital infrared thermometer, digital multifunction meter with vfd, ef-detection & 3-phase rotation, vde approved insulated tool set for ev, electric vehicle safety equipment, ev battery assembly & testing centre setup, ev battery pack cell equalizer, regenerative charging and braking training system, ev assembly disassembly kit, three phase power clamp-on meter with harmonics measurement, digital insulation multi function meter, phase sequence indicator, battery quality anaylyzer with data logger, laptop, hybrid display module, hybrid trainer module motorized, professional wall charts (approx 4 ft x 3 ft ), professional lab layout and design, computing workstations / pc, engineering simulation software multi-physics cae research software (includes pre-processor and post processor) 10 users, 3d cad package ( 60 user), laptops, professional wall charts (approx 4 ft x 3 ft ), professional lab layout and design, video conferencing set-up, electromagnetic (em) simulation with circuit design, rf circuits and system design (5g) academic research software :, integrated circuit (ic) design & verification academic research software :, soc development board with software, emc/emi test equipment, spectro radiometer for measurement of the luminous flux, spectrum, color, and color rendering indices of single leds (hand held device), high end computers, 3d printer for prototyping, laptop, professional wall charts (approx 4 ft x 3 ft ), professional lab layout and design, revolving chair with arm centre pivot mechanism, computer table, white board with stand, revolving office chair with arm centre pivot mechanism for faculty, laboratory wooden table, office table for faculty, major almirah with glass type doors, seminar chairs with desklet, executive office table, executive office chair, sofa set (3+2+1 seater), teapoy/coffee table, visitors chairs with cushion, major almirah, multi function/ all in one printer for office and lab, necessary electrification and networking, matting area with labour work (in sq ft), false ceiling (in sq ft), window sliding door, window curtains with fitting, gypsum plaster with wall putty, wall colori

State Government

CTN :39676420

11 Apr, 2025 NA

Bengaluru - Karnataka

Tender For tender for the procurement of picu medical equipments - 2025 - non invasive monitor fluid therapy system, cardiac table,, invasive cardiac output monitor, video paediatric bronchoscope, transport ventilator, high frequency oscillator ventilator for paediatric, haemodialysis machine with ocm , bpm, ecmo

CTN :39666331

02 Apr, 2025 4.10 Crore

Doda - Jammu And Kashmir

Tender For establishment of 2nd phase-50 kkg units under hadp programme at multiple locations in district doda including it and non-it items. - a). facilities for nodal officer cyber-extension platform ( it facilities) 1. touch screen kisok with biometric, cctv, microphone, etc. ( 1 unit), 2. desktop computer ( 1 unit), 3. scanner-copier-printer (3 in 1) ( 1 unit ), 4. hybrid video conferencing system (1 unit ), 5. dslr camera ( 1 unit ) 6. ups with solar system facility ( 1 unit) 7. servo stabilizer (1 unit ) 8. vertical sinage display (1 unit ) 9. e-pos machine (1 unit ) b). furniture and branding 1. office table with cabinet ( 1 unit ), 2. office chair ( 1 unit ), 3. cushioned chairs ( 10 units ), 4. outdoor chairs (pvc/fibre) ( 30 units ) 5. steel lockers (5 shelves) (2 units), 6. display racks (2 units), 7. white board (1 unit), 8. branding ( 1 unit ). note:- all the items shall be supplied and installed as per specification mentioned in enit document.