Latest nut bolt Tenders | Government nut bolt Tenders

Central Government And Public Sector

CTN :39832460

16 Apr, 2025 34.90 Lacs

Agra - Uttar Pradesh

Tender For repairs to excavated remains in outer side of mint areas at fatehpur sikri, agra -supply of materials - supply of 1st quality well burnt unslaked lime in a sealed air tight bags including transportation lead, lift & stacking at site. (rate including g.s.t.), supply of fine crushed brick surkhi obtained from 1st class well burnt bricks including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), supply of sieved coarse sand (screened) free from lumps, dust, silt & organic impurities. including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), belgiri (rate including g.s.t.)., gum babool (rate including g.s.t.)., gur (rate including g.s.t.)., r.r. stone nominal size (rate including g.s.t.), red sand stone 65mm thick (rate including g.s.t.)., brick ballast of lakhori brick/ 1st class brick 40mm size (rate including g.s.t.), earth work in excavation by manual means in foundation trenches, including dressing of sides and ramming of bottoms, getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), providing and laying in position cement concrete of specified grade 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). (rate including g.s.t.), random rubble masonry with hard stone in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) including t & p, material, scaffolding etc complete. (rate including g.s.t.), providing coursed rubble pathway with hard stone with :cement mortar 1:6 (1 cement : 6 coarse sand) inluding supply of all materials labour t&p etc. required for proper completion of work. (rate including g.s.t.), providing & fixing m.s. grill of required pattern with angle iron frames (40x40x6)mm size graded with square bars 12mm size 10 cm c/c pointed at the top with extra curved bar and each frame with (40x40x6)mm. size horizontal hold fast welded with lower posts and fixing angle iron vertical post (50x50x6)mm size and nut bolts including cutting fabricating welding etc. complete. (rate including g.s.t.), providing and fixing of r.s. joist (175x85x5.80)mm for hanging of m.s. gate including priming at diwan-e-am, fatehpur sikri, agra. (rate including g.s.t.), pdg. 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 c.sand) and a top layer 6mm thick cement plaster 1:3 (1cement : 3 c.sand) finished rough with sponge. (rate including g.s.t.), pointing on stone masonry with cement mortar (1 cement, 3 c.sand) mixing with coloring pigment, t & p, scaffolding etc complete. (rate including g.s.t.), steel work in built up tubular trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. electric resistance or induction butt welded tubes. (rate including g.s.t.), painting with synthetic enamel paint of approved brand and manufacture of required colour :two or more coats on new work. (rate including g.s.t.), red sand stone 75mm thick top fixing in m.s. iron frame/ pathway fine dressed on all exposed surface in required pattern and all material labour t&p etc. required for porper completion of work. (rate including g.s.t.), disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to outside of municipal limits for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge. (rate including g.s.t.), providing and fixing of red sand stone benches having 4 legs of size (0.25x0.25x0.45)m with simple moldings and 8cm thick red sand stone top size 1.50x0.60 m as per design and matching to the existing pattern at site. (rate including g.s.t.), hiring charges of electric / diesel mixer grinder for mortar with operator and fuel etc. co

Corporations/Associations/Others

CTN :39821570

03 Apr, 2025 NA

Nanded - Maharashtra

Tender For purchase and supply of electrical equipment for the electrical department for municipal council kundalwadi - lamps and tubes for indoor & outdoor, supplying lamp 230v, 40 w., supplying lamp 230v, 60 w., supplying lamp 230v, 100 w., supplying tube rod 36/40 w., supplying t5 24 w energy efficient fluorosenttube, supplying led lamps 2 to 3 w, 230v intergraltype, supplying led lamps 5 to 8 w, 230v intergraltype, tube side patti g.i material, supplying cfl street light fitting suitable for 2* above 18 to 36w cfl, electronic ballast having pf>0.9 complete with accessories on provided bracket, adopter, supplying cfl 5 to 8 w with ceramic adopter p.f.more than 0.9, supplying cfl 9 to 11 w with ceramic adopter p.f.more than 0.9, supplying cfl 14 to 15 w with ceramic adopter p.f.more than 0.9, supplying cfl 18 to 20 w with ceramic adopter p.f.more than 0.9, supplying cfl 22 to 26 w with ceramic adopter p.f.more than 0.9, supplying and erecting cfl 27 to 36 w with ceramic adopter p.f.more than 0.9, supplying and erecting cfl 45 to 65 w with ceramic adopter p.f.more than 0.9, t-5 rod side holder side, supplying and erecting low watt loss vaccum impregnated copper choke (vpit) suitable for cfl/ftl from 36 to 40 w, supplying ready to use t8 retrofit led22 w tube light with heat sink, integrated hf electronic driver & compatible with existing t8 (36w) / t12 (40w) fuminaire by removing starter & ballast and with warranty of free replacement for min 3 years, supplying hpsv lamp 3 pin bc/screwed cap head / pin type 230v, 70w son-t-type, supplying and erecting hpsv lamp 3 pin bc/screwed cap head / pin type 230v, 150w, supplying and erecting hpsv lamp 3 pin bc/screwed cap head / pin type 230v, 250w, supplying and erecting hpsv lamp 3 pin bc/screwed cap head / pin type 230v, 400w, supplying and erecting hpsv lamp 3 pin bc/screwed cap head / pin type 230v, 70 w son, supplying and erecting hpsv lamp 3 pin bc/screwed cap head/pin type 230v, 150 w, supplying and erecting hpsv lamp 3 pin bc/screwed cap head/pin type 230v, 250 w, supplying and erecting hpsv lamp 3 pin bc/screwed cap head/pin type 230v, 400 w, supplying and erecting low watt loss vaccum impregnated copper choke (vpit) suitable for cfl/ftl from 24 to 40 w as, supplying and erecting electronic ballast, pf>0.9 or transformer suitable for t5 lamp upto 28 w as per, supplying and erecting electronic ballast, pf>0.9 or transformer suitable for t5 lamp upto 40 w, starter, suppying 18 / 20 / 36 / 40 w tube starter 230 v, starter base, providing and erecting clamps for box type / industrial type fitting with provided suspension down rod of 20 mm dia. h.g. conduit, the clamp shall be made of 25 x 3mm ms flat with cutting, bending, drilling erected properly with necessary nut bolt, led street light, supplying led street light 50w, supplying led street light 60w, supplying led street light 80w, supplying led street light 100w, supplying led street light 150w, supplying led streeth light driver 50w, supplying led streeth light driver 60w, supplying led streeth light driver 80w, supplying led streeth light driver 100w, supplying led streeth light driver 150w, supplying led streeth light pc 50w, supplying led streeth light pc 60w, supplying led streeth light pc 80w, supplying led streeth light pc 100w, supplying led streeth light pc 150w, bell, supplying and erecting ding dong / electronic musical type call bell with heavy coil suitable to operate on 230 v a.c. supply erected on polished double wooden block / sumica block of suitable size, supplying and erecting luminous / modular type call bell indicator with plastic body, heavy duty coil and indicatorlamp working on 230v a.c. supply with resetting arrangement complete erected on double wooden / sunmica board., fan, supplying and erecting, resistance type regulator for ceilling fan 600/900/1200/1400mm sweep, complete erected on provided switch board., supplying and erecting electronic type step regulator for ceiling fan 600/900/1200/1400 mm

corporations/Associations/Others

CTN :39846628

11 Apr, 2025 NA

Umaria - Madhya Pradesh

Tender For supply of gi pipe 1.25 inch , gi socket 1.25 inch , gi link rod , handpump pedestal thia , conversion headset , cylinder set , fixture set , excel handpump , bearing 6204 , pvc basar , leather basar , chain , rod basar , rod socket , gi nut bolt 4x2 , gi nut bolt 3x2 , pvc column pipe 1.25 inch , steel toti 0.5 inch , pvc toti 0.5 inch , ci toti 0.5 inch , elulation tape , kaccha rabar , m-seal , handle bearing thia , water chamber , gi baser 4 inch , gi baser 3inch , gasket package seal

State Government

CTN :39742983

02 Apr, 2025 7.00 Lacs

Behror - Rajasthan

Tender For corrigendum : nit no. 04-, tail piece, , 80 mm, , 90 mm, , 100 mm, , 110 mm, , 125 mm, , 150 mm, , non return valve, , 50 mm, , 65 mm, , 80 mm, , rubber flange washer, , 50 mm, , 65 mm, , lead wool, , pvc d joint, , 75 mm, , 90 mm, , 110 mm, , 140 mm, , 160 mm, , m.s nut bolt, , 16 * 40, , 12 * 100, , 12 * 90, , hand pump nut/bolt, , bolt 12*40 mm, , nut 12 mm, , bolt 10*40 mm, , nylock nut 10 mm, , air valve, , 15 mm, , 25 mm, , fuse wire, , 15 amp, , 20 amp, , 25 amp, , 32 amp, , gland packing, , 8 mm, , 10 mm, , 12 mm,

Central Government/Public Sector

CTN :39837185

24 Apr, 2025 NA

Nagaur - Rajasthan

Tender For supply of contact wire parallel clamp small with fasteners ri part number 1041-2 (with ss nut bolt) as per rdso specification number ti/spc/ohe/fittings/0130-10/13 rev-1 and drawing number eti/ohe/p/104 0-2 mod-e or latest [ warranty period: 30 months after the date of delivery ]

State Government

CTN :39825603

08 Apr, 2025 NA

Kheda - Gujarat

Tender For supply of various consumables items at coal plant electric wtps - galvanized crimped wire mesh jali having size of mesh 1.25"x1.25" square and thickness of wire shall be 10 gauge , polyamide power terminal block dpbb 70 , cable end termination, for 3.5c x 50 sq.mm cable including required size of gland, lugs and all required sundry materials. , copper tube terminal heavy duty 2.5 mm2 , pin type copper lug 2.5 mm , cable gland double compression cbw-01ss , cable tie , unbreko make ht(high tensile) nut bolt (full thread) with double washer size: m06 x 50 mm , unbreko make ss nut bolt (full thread) with double washer size: m10 x 50 mm , ht pvc insulation tape size 0.18 mm x25 mm x 65 mtr length , self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of red colour , self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of yellow colour , self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of blue colour , self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of , self adhesive pvc electric insulation tape rolls with isi mark size 1.80 cm width x 7.5 mtr length x 0.125 mm thickness, of green colour

Central Government/Public Sector

CTN :39849605

08 Apr, 2025 9.90 Lacs

Bilaspur - Chhattisgarh

Tender For laying of track line in mk seam of including transportation of line, sleeper from surface or old working of mine, providing dog nail mafish plates, nut bolts for fish plate, grading and line packing and repair/ maintenance of existing track line.

Central Government/Public Sector

CTN :39846685

17 Apr, 2025 NA

Delhi - Delhi

Tender For supply of hexagonal nut bolt , antitheft bolt , spring washer , hexagonal bolts and nuts , spring washer , pack washers

Central Government/Public Sector

CTN :39835299

07 Apr, 2025 NA

Chandrapur - Maharashtra

Tender For supply of bolt hex cs ht half m30 300mm with nut , bolt hex cs ht half m22 100mm with nut , bolt hex cs ht half m12 45mm with wshr and nut , bolt hex cs ht half m10 50mm with nut , bolt hex cs ht half m10 50mm with nuts

Central Government/Public Sector

CTN :39846548

07 Apr, 2025 17.73 Lacs

Angul - Odisha

Tender For supply of fluid coupling complete t-12 07 part no- t1207 , fusible plug with o ring part no- t12121112 , base plug part no- t121210 , flexible disk part no- t121218 , fx nut bolt and washer part no- t1212202122 , repair kit for fluid coupling t-12-12 part no- t121230323948 , coller bolt nut and washer part no- t1212404142 , driving bolt nut and washer part no- t121243444546 , driving plate part no- 5 , fusible plug part no- t120611 , plug o ring part no- t120612 , fxi part no- t120617 , flexible disc part no- t120618 , fx bolt nut and washer for fluid coupling part no- 202122 , repair kit for fluid coupling t-12-06 part no- 30323948 , driving plate for fluid coupling t-12-07 part no- t12075 , base plug part no- t120710 , fusible plug part no- t120711 , plug o ring part no- t120712 , flexible disc for fluid coupling t-12-07 part no- t120718 , spherical bush for fluid coupling t-12-0 part no- t120719 , fx nut bolt and washer part no- t1207212223 , fxo nut bolt and washer part no- t120740 , repair kit t-12 or 07 part no- t120730323948 , is bolt and washer part no- t12075051

Nut Bolt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors