Latest office cabin Tenders | Government office cabin Tenders

State Government

CTN :43559334

17 Jan, 2026 3.49 Lacs

Thiruvananthapuram - Kerala

Tender For general state planning board finance officer cabin renovation of finance officer cabin at 3rd floor of main block retender

Central Government/Public Sector

CTN :43514639

17 Jan, 2026 NA

Ernakulam - Kerala

Tender For turnkey wooden deck jobs on board navy ship - turnkey service for wooden deck & wooden jobs on-board navy ship (rm.0827), wooden ladder to be removed/ renewed and refitted post varnished, qty - 05, mat - teak wood., remove fife rails from deck. repair/ renew and refit. check conditions of deck plates. ss, teak wood. as per sample post fitment of mast. qty - 03, mat - ss, teak wood, brass cap for belay pin provided by the shipyard. vendor to quote for repair only., water leakage observed from following location in weather deck: - (i) fore mast and fifrail. (ii) main mast and fifrail. (iii) port and stbd fifrail on foxle. (iv) mizzen mast and fifrail. (v) 14 numbers skylights, (vi) soft patches on bridge deck. ra for repair of the same. job involve: - removal of wooden deck, sealing of all deck penetrating nuts, bolts and fittings using sealing compound and restoring of wooden deck. approx area for wood removal 40 sqmt.(r/refitting wooden deck (no renewal) after sealing compund application), weather deck wash basin drain deteriorated to be renewed, qty - 8 rmt, mat - cu-ni, dia- 50mm. sow involve:- (i) removal of old drain line and fitment of new drain line. removal and re-fitment wooden deck to be undertaken by the vendor , approx area one sqmt., wooden deck of stern platform perished/ deteriorated to be renewed. approx area - 16 sqmtr, mat - teak wood, wooden deck cracked/ damaged at various locations. ingress of water observed from the same areas. wood renewal to be undertaken at following location: - (a) foxle - 25 sqmt, (b) main mast - 17 sqmt (c) quarter deck - 18 sqmt, (d) stp lobby - 5 sqmt, (e) wardroom lobby - 5 sqmt. sow involve:- (i) degutting of wooden deck at indicated locations (by the vendor). (ii) deck plating to be surveyed post degutting of wooden deck and renewal of deck plate as per survey report. (iii) regutting of wooden deck with new burma teak wood (by the vendor). (iv) wooden deck sealing to be carried out post regutting with bostic compound(simson msr deck caulk) (by the vendor). total area - 70 sqmt approx., sealing/caulking compound between wood on upper and lower decks compartments deteriorated to be repaired in situ, qty - 1000 rmt, polishing and varnishing of wooden flooring of weather decks to be carried out view polishing deteriorated .job involve scrubbing of deck, removal of dirt/ oil/ grease / paint from deck with buffing machine and application of varnish in following steps; _ (i) apply two coat of sealer, (ii) two coat of colour, (iii) one coat of varnish. total area - 300 sqmt, polishing and varnishing of wooden deck of following compartment to be carried out view deteriorated: - (a) captains cabin (b) exos cabin (c ) wardroom (d) officers cabin (e) wardroom lobby (f) pos messsqmt, (g) dining hall (h) hod mess (j) gunwale (k) po mess lobby (l) pin rail (m) wooden gratings (n) cock pit store (p) chart house (q) ships office, (r) bow sprit sqmt, (s) sickbay (t) cadets mess . job involve scrubbing of deck, removal of dirt/ oil/ grease / paint from deck with buffing machine and application of varnish in following steps; _ (i) apply two coat of sealer, (ii) two coat of colour, (iii) one coat of varnish. total area - 200 sqmt., bowsprit major weathering cracks at scattered locations to be repaired. scope of work as follows : -(i) buffing of the area.(ii) repairs to be carried out using marine epoxy resin., varnish of bowsprit is to be undertaken with saturated coats of deck olje d1 saturating wood oil with clear matt finish and six coats of deck olje d2 flexible high gloss oil varnish. qty - 20 sqmt., bow sprit base bolts to be renewed view nut & bolts deteriorated( size- m20 , mat - ss), qty - 30 nos, bowsprit handrail repairs at scattered locations( type - wood, mat and dimension- as per sample).scope of work as follows : -(i) cutting of handrail of designated area and renewal of the same as per the piece cut. qty - 04, bow sprit base deteriorated. bow sprit base to be removed/ renewed

CTN :43556960

27 Jan, 2026 3.00 Crore

Multi City - Karnataka

Tender For dpr preparations include the public office space of approximately 75,000 sft. catering to various activities of a city corporation, including council hall, offices, cabins, meeting halls, lounge cum waiting areas, office space for it department, record room, integrated command control centre, library, parking space, cafeteria along with their ancillary facilities

CTN :43519662

30 Jan, 2026 NA

Ernakulam - Kerala

Tender For supply of metallic powder coated locker of (h-12xw-15xd-15 inch) size and with magnetic catch (maximum lockers , metallic shoe rack of size (20x30x40 cm) (ss 316 grade) , ss benches (ss 316 grade) lengh - 4 mtr , key board with wpc of high density with glass cover and lock , making cabinets and drawers at reception counter with marine plywood and good quality

CTN :43547136

22 Jan, 2026 NA

Gondia - Maharashtra

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - panchayat samiti; office cabin cahier. - standard size = 25 no. + 4 wheel chair; service provider

CTN :43538350

19 Jan, 2026 4.50 Lacs

Hoshiarpur - Punjab

Tender For construction of reception counter at mc office, hoshiarpur (reso no 674 dated 27.10.2025)

Central Government/Public Sector

CTN :43541193

22 Jan, 2026 3.60 Lacs

Lucknow - Uttar Pradesh

Tender For renovation and up gradation of seating arrangement and making provision for section officer cabin in purchase section at csir - cimap, lucknow.

State Government

CTN :42975278

19 Jan, 2026 3.00 Lacs

Rajgarh-Mp - Madhya Pradesh

Tender For corrigendum : purchase of furniture items - officer table :- providing and supplying table of size 5 x2 6 x2 6 with c-frame leg 200 mm wide made of aluminum profile and crca formed section having provision for wire management. top made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminate, wooden edge banding of edges. dotted embossed cable duct and with single drawer (w-350 mm, h-165 mm, d-475 mm) with branded telecopic channel. all steel components are epoxy powder coated after seven tanks. anti-corrosion., officer chair :- supply and placing high back revolving chair size total height 1030-1115 mm, depth 685 mm width 590 mm seat hight 425-510 mm, 5- prong nilony base for stability twin wheel heavy duty caster for easy mobility under load hot pressed plywood with steel t-nuts for rigid fasting seat and back are covered with pp cover, sturdy steel colum gas lift for center support and seat height adjustment, telescopic abs cover over steel colum low cable center tilt mechanism and with single piece integral center tilt mechanism and with single piece integral skin pu arm rest, quality tapestry high density molded pu cushion., staff chair :- supply and placing staff chair size total height 850 mm depth 570 mm, width 550 mm seat hi=eight 440 mm, uinder structure cantilever type ms crca tube 1.6 mm thick. hot pressed plywood with steel t-nuts for rigid fastening. single piece integarl skin pu arm rest. quality tapestry. high density pu molded cushion. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface., waiting chair :- supply and placing waiting three seater fixed chair, size ; total length 1800 mm, total height 750 mm, total depth 630 mm and seat height 410 mm, made of ms crca press formed seat components duly seamless welded to get proper finish chrome plated handles & base. steel perforated ms moulded one piece seat and back fitted in moulded chrome plated side strips, three individual seat fitted on ms tube support of 75 mm x 35 mm, seat and bottom support are powder coated., computer table :- supply and fixing in position computer table (work station) having size length 900 mm, width 600 mm, height 760 mm, c-frame & tubular crca steel structure, fabrication involves only mig/tig & spot welding. top & shelf made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminated, wooden edge banding of edge, shelf adjustable on steel brackets. removable tubular cpu stand and an embossed modesty panel below table top provided. provision for wire management, drum type leveler. all steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface., plastic chair:- plastic arm chair for office, godrej almira :- godrej interio almira slim size 2 door steel almira, 4 shedves, size length 1828 mm, width 914 mm, water cooler :-cooling capacity- 5 ltr./hr.number of taps- 2color- whiteweight- 10 kg., cash counter:-office reception table & cash counter desk of woodenproduct dimensionslength 48 , width 24 , height 36 approx., record rack :-material- mild steelno. of shelves- 5 shelvesmount type- finish type color- greyusage/application- officerack type- open rackappearance- modernproduct type- pre standing unitassembly required- no, bench :- product dimensions12d x 48w x 18h centimetersmaterial- stainless steekframe material- stainless steelcolour- silverstyle- antiquesize- 48"l x 12.3"w x 18"h overall size: 48"l x 12.3"w x 18"h, digital electronic safe locker for office with auto lock function, anti-theft alarm and led displays size length 500 mm width 350 mm

CTN :43469708

21 Jan, 2026 NA

Kupwara - Jammu And Kashmir

Tender For supply of desks , chairs , table , laptops , high speed internet and vc sets , printer scanner copier , webcam , signage , desk names , notice board , drinking water facility , fire extinguisher safety items , separate toilets , air conditioner , heaters , office cabinet , stationary and dustbin , biometric attendence device , vistor register , cleaning supplies and sanitation , electrical fitting accessories , transport and other expenditure w.r.t setup , stationary

CTN :43452205

15 Jan, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of ply board 18mm table size 5ft by 2. 5ft by 2. 5ft , ply board 18mm table size 8ft by 2. 5ft by 2. 5ft , ply board 18mm table size 3ft by 2. 5ft by 1. 5ft , ply board file box size 3ft by 2. 5ft by 2. 5ft , aluminum partition for office cabin

Office Cabin Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government