Oil Pan Tenders

Tender For auction sale of rolling stock - lot no.divn/nmp/14/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 10079767759 boxnel (nlb) 2) sc 10099860126 boxnm1 (nlb) 3) se 30079303863 bcnam1 (nlb) 4) sc 10099763168 boxnm1 (nlb) 5) special repair 25069660255 boxnr (nlb) steel body 6) se 10079765656 boxnm1 (nlb) 7) se 10079771299 boxnm1 (nlb) 8) se 25079777622 boxnr (wm) steel body 9) se 10079771480 boxnm1 (wm) 10) sc 10099762840 boxnm1 (wm) nb: (1) : i) wagons are to be sold without 14 nos. nlb trolleys against special repairl. no. 01 to 07. ii) wagons are to be sold with 06 nos. wm trolleys against special repairl. no. 08 to 10. iii) wagons special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Tender For auction sale of rolling stock - lot no.divn/nmp/13/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 25079882746 boxnr (nlb) steel body 2) wr 10089762577 boxnm1 (nlb) 3) special repair 10069749680 boxnm1 (nlb) 4) nr 75039288897 bobsnm1 (nlb) 5) se 75079216027 bobsnm1 (nlb) 6) nr 75039188142 bobsnm1 (nlb) 7) se 75079217901 bobsnm1 (nlb) 8) cr 10019660348 boxnm1 (wm) 9) sc 25099661857 boxnr (wm) steel body 10) sc 30099368064 bcnam1 (wm) nb: (1) : i) wagons are to be sold without 14 nos. nlb trolleys against special repairl. no. 01 to 07. ii) wagons are to be sold with 06 nos. wm trolleys against special repairl. no. 08 to 10. iii) wagons special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock-a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Tender For auction sale of rolling stock - lot no.divn/nmp/19/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) cr 75019208129 bobsnm1 (nlb) 2) se 75079116808 bobsnm1 (nlb) 3) se 10079660975 boxnm1 (nlb) 4) special repair 10069749505 boxnm1 (nlb) 5) special repair 25069660293 boxnr (nlb) steel body 6) sc 25099661345 boxnr (nlb) steel body 7) sc 10099620584 boxnm2 (nlb) nb: (1) : i) wagons are to be sold without 14 nos. nlb trolleys against special repairl. no. 01 to 07. ii) wagons special repairl no 01 to 07 to be sold without 28 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Tender For auction sale of rolling stock - lot no.divn/nmp/20/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) special repair 75069295278 bobsnm1 (nlb) 2) er 75029279478 bobsnm1 (nlb) 3) se 75079260617 bobsnm1 (nlb) 4) se 10079663594 boxnm1 (nlb) 5) special repair 10069749079 boxnm1 (nlb) 6) se 10079768336 boxnm1 (wm) 7) sc 10099632648 boxnm1 (wm) nb: (1) : i) wagons are to be sold without 10 nos. nlb trolleys against special repairl. no. 01 to 05. ii) wagons are to be sold with 04 nos. wm trolleys against special repairl. no. 06 and 07. iii) wagons special repairl no 01 to 07 to be sold without 28 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Tender For auction sale of rolling stock - lot no.divn/nmp/12/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) nr 30039061383 bcnm1 (nlb) 2) cr 30019061198 bcnm1 (nlb) 3) scr 10099561573 boxnr (nlb) steel body 4) cncr 98259002418 bfkhn (nlb) 5) special repair 30069062541 bcnm1 (nlb) 6) ser 10079560848 boxnm1 (nlb) 7) er 30029060075 bcnm1 (wm) 8) cncr 98259012028 bfkhn (wm) nb: (1) : i) wagons are to be sold without 12 nos. nlb trolleys against special repairl. no. 01 to 06. ii) wagons are to be sold with 04 nos. wm trolleys against special repairl. no. 07 & 08. iii) wagons special repairl no 01 to 08 to be sold without 32 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Tender For corrigendum : supply of mt spares for tvs star city sml 3 ton and eicher 3 ton - indicator switch assy tvs star city , side indicator tvs star city , lock side cover type-2 tvs star city , withdrawal bearing sml 3 ton , hand brake cable sml 3 ton , brake shoe lining with rivets sml 3 ton , pressure plate sml 3 ton , hyd slave cylinder sml 3 ton , clutch plate sml 3 ton , gear lever assembly sml 3 ton , gear shift cable sml 3 ton , gear selector cable sml 3 ton , accelerator cable sml 3 ton , spigot bearing sml 3 ton , master cylinder clutch sml 3 ton , trim door sml 3 ton , air hose assy sml 3 ton , fuel pipe sml 3 ton , spring brake repair kit eicher , brake master cylinder sml 3 ton , spark plug tvs star city , front indicator lh tvs star city , clutch cable tvs star city

State Government

Tender For supply of power steering system of american crane model 5450 t spare parts as per catalogue f f - power steering assembly part number 197461 , ring snap 7g32726 , ring snap 7g32417 , ring snap 7g32727 , dw seal 7g3266615 , washer 7g36524nf , head 7g36522 , o- ring seal 7g32077 , rod piston , seal rod 7g32131 , piston ring set 7g406 , piston 7g34614 , nut 7g32464 , cylinder body , pin 7g407 , block 7g408 , lubrication fitting 7g32013 , repair kit 7g2897 , wheel hub 110120 , air brake chamber 222227 , air brake chamber 814583 , boom dog air valve 807472 , swivel joint assembly l4802 , planet spider assembly 114449

Tender For tender for supply of flasher solid state , arm wind screen wiper/s/a of wiper arm , repair kit mechanical transmission , air filter , lamp fluorescent (bulb side lamp & tail , filter element intake air cleaner , cabin light , kit slave cylinder , wiper blades , tail light glass , radiator cap , assy rear view mirror outer (lh) , assy rear view mirror outer rh , fuel filter insert , secondary fuel filter 1 liter(star type) , horn assy high , bulb (12v 5w) , bulb turn signal (12v 21w) , cable assy clutch , pan class="text-red-selected">oilpan> filter assy , blade assy wiper , spark plug n11yc , indicator light , master cylinder repair kit(api) consisti , cartridge lub pan class="text-red-selected">oilpan> filter , assy rear view mirror out side , brake fluid container assy , bulb for tail lamp 24v 6w ba-15s , halogen bulb h4 24v 60/65w p45 t capt fo , convoy lamp , door lock front rh , head fuel filter , mirror assy inner rear view (side view mirror) , terminal negative , accelerator cable , assy cap radiator

Tender For auction sale of rolling stock - lot no.ws/ayma/04/04/26-27/bg/cond./4w/8w/wgn. description- iron and steel scrap cutup parts of bg cond.4w/8w/wgn. without contents if any. 1) se 75079316598 bobsnm1 (nlb) 2) special repair 30069060806 bcnm1 (nlb) 3) er 72029562463 bobrnm1 (nlb) 4) er 72029564177 bobrnm1 (nlb) 5) nr 85039647471 bvzc 6) se 85079704141 bvzc 7) cr 85019660094 bvzc nb: (1): i) wagons are to be sold without 08 nos. nlb trolleys against special repairl. no. 01 to 04. ii) wagon serial no. 01 to 04 to be sold without 16 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower etc and other excluded fitting as per latest excluded fitting list. * iii) wagon serial no. 05 to 07 to be sold without 06 nos. r/b wheel sets, axle box cover plate, bg spring and brake gear with lever pull rod etc . as per latest fitting list. **( it contains no trolley ) *excluded fittings list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) delivery will be given in numbers.

Tender For bid to ras supply of battery cut off switch , injector assy fuel , fuel feed pump , valve relay air pressure , mudguard lh , tie rod assy , major repair kit for master cylinder , fuel feed pump cd 6a 2281 , fuel water separator assy with heater , distributor head , element lub pan class="text-red-selected">oilpan> filter , cylinder assy master with booster , two way valve - 434 208 0290 , assy combination switch , body assy throttle , clutch valve -611006002 , cyl assy hyd brake master dia 38.1x75 st , filter cum water separator , combi switch ms harness , alternator 12v 55amp , switch assy , lock assy steering , bearing frt wheel , pump hand fuel pump , assy clutch disc pressure plate , assy sleeve cyl , filter fuel , fog light 12v , pump hydraulic ram hand driven , cabin light , cartridge lub pan class="text-red-selected">oilpan> filter , vane pump , assy release bearing 1.75 dia , rotary switch iec make 16a 24v rotary , change over switch , air horn 3 pa 004 206 051 , 352 dia clutch disc assy 1.75 spline , assy outer handle lh , horn signal air horn assy , assy rear view mirror outer rh , wheel cylinder 44.45 mm dia bi , field cpan class="text-red-selected">oilpan> assy , assy fuel heater , convoy lamp , reverse light , assy 310 dia clutch disc , solenoid operated valve , bulb 24v 55 50w p 45 t , bearing , assy sunvisor rh , combination switch , assy tail lamp lh , door lock assy lh , buckle 16mm , halogen lamp 24v 75 70 w , steering lock-6008 f , assy blinker lamp lh , slave cyl clutch , filter element primary , head lamp bulb a 12v 45 40wdin 72601 , major kit clutch master cyl repair ) /bid number : gem/2026/b/7400701 * /dated: 29-03-2026 & & / bid document 1 / 46