Latest oil pump gear Tenders | Government oil pump gear Tenders

corporations/Associations/Others

CTN :39863463

17 Apr, 2025 NA

Multi City - Multi State

Tender For auction sale of hydromotor amk-12-5 etc.,track sprocket disk etc.,crank case etc.,housing mechanical drive (075366) (m&m etc.,rear axle shaft brg cone & roller etc.,x hydraulic head and rotor etc.,front axle assy with hub & dis etc.,assy air filter element (lbpv) etc.,coil bearing etc.,leaf no 5 front sprg etc.,rear axle shaft left (m&m soft top) etc.,differential case assy (m&m soft top) etc.,rear axle assy etc.,gear box assy etc.,microphone and rx head gear assy etc.

State Government

CTN :39851285

01 Apr, 2025 NA

Kolhapur - Maharashtra

Tender For supply of spares- breather filter , oil level gauge , drain valve , float switch , return line filter , suction strainer gear pump (5.8 , ipm @ 1500 rpm) , flexible drive , coupling , electric motor inline check , valve pressure relief , valve , pressure gauge six station , gauge isolator , hand pump make inline check , valve , pressure switch solenoid operated dc , valve modular poilot operated check , valve throttle & check , valve needle valve 1 , shut off valve , ball valve poppet operated dc valve (normally , closed) oil reservor tank , 751trs pressure gauge , panel motor+ pump , mounting housing , manifold hydraulic hose , pipes , hardware

Central Government/Public Sector

CTN :39851518

15 Apr, 2025 NA

Mandal - Gujarat

Tender For supply of ammonia compressor spares> - crank shaft assembly complete (part no.340.03.001.50 ), bearing bush (std) pump end (part no.082.28.050.50 ), thrust ring bronze (part no. 336.02.004.50 ), thrust ring steel (part no.336.03.005.50 ), driving plate (part no. 082.28.060.50), retaining plate assembly (part no. 336.14.114.50), bearing bush (std) drive end (part no.336.02.003.50 ), connecting rod bolt (part no. 082.04.040.51), bearing intermediate half (std) (part no.086.15.030.50 ), shaft seal (part no.082.08.000.50 ), piston assembly (part no.082.03.000.50 ), plate safety (piston) (part no.082.03.040.50 ), set of piston rings (part no.082.03.150.50 ), big end bearing half std (part no.082.04.030.50 ), gudgeon pin (part no.082.03.020.50 ), connecting rod with bolt (part no.082.04.070.50 ), delivery valve assembly (part no. 336.12.003.50), suction valve spring (part no.336.12.001.50 ), suction valve ring (part no.082.28.130.50 ), suction stroke limiter (part no. 336.12.002.51), cup spring (part no. 336.12.011.50), cylinder liner assembly (part no.336.04.000.50 ), cylinder liner(part no. 336.04.001.51), safety plate (connecting rod) (part no. 082.04.050.50), unloader piston assembly (part no. 336.05.007.50), oil pump assembly (part no. 082.07.000.50), filter wire gauge (part no. 336.10.009.50), paper filter (part no.351.09.014.50 ), suction filter assembly (part no. 336.10.023.50), discharge filter assembly (part no.336.10.031.50 ), tah-8 valve assembly (part no. 351.09.003.50), hex nut (connecting rod nut) (part no. 082. 04. 100 .51), spring (vld piston) (part no.336. 05 .002 .50 ), kit delivery valve ring and springs (part no.085.28.08 ), teflon ring (vld piston) (part no. 336.05.006.50), spring (oil regulator) (part no.082.09.020.50 ), oil level glass (part no.082. 28. 170. 50 ), ball dia 16 (part no. 999. 30 .785. 50), k5 valves (part no. 082. 16.001. 50), stud (short) m16 x35 (part no. 999.03.700.50), stud (long) m16 x65 (part no.999.03.710.50 ), hexagonal hd screw m16x35 (part no. 999.01.690.50), set of safety valve parts (part no.336.13.00 ), kit gasket/ o rings/ all packing for kc-9 compressor (part no. 852801), kit oil pump gear (part no. 0852805), kit liner parts(part no.0852810 ), kit-shaft seal o ring (part no.0852804 ), intermediate bearing assembly (part no.086.15.040.50 ), hex nut m16 (head cover) (part no. 999.06.687.50), bearing cover assembly drive end (part no.336.02.001.50 ), bearing cover assembly pump end (part no.082.02.001.50 ), stud for bearing cover m12 x 125l (part no. 999.03.688.50), stud for bearing cover m12 x 100l (part no. 999.03.683.50), hex nut m12 (part no.999.06.650.50), solenoid valves for kc-9 compressor (part no. 082.25.030.50), key for flywheel / shaft key (part no.082.28.191.50 ), fly wheel / compressor pulley - kc 9 (part no.350.01.033.50), oil return valve (part no. 082.06.000.50), kc buffer springs (part no.080.04.020.50 ), gudgeon pin bush (part no.082.04.020.50 ), piston (part no.080.03.110.50 ), gasket kpgm 3/b (head gasket) (part no.082.28.670.50 ), ring teflon (safety valve) (part no.336.13.002.50 ), aluminum packing set (part no. 082.19.003.50), o-ring set for kc-09 (part no.080.19.005.50 ), gasket set (part no.080.19.001.50 ), gasket round flange 150 nb (part no. 993.00.311.00), hex. head bolt m 10 x 70 (part no. 999.01.655.50 ), housing for piston (part no. 082.10.090.51), shaft seal cover (part no.082.28.160.50 ), spring (leaver) (part no.082.10.050.50 ), springs (oil filter) (part no.336.10.006.50 ), springs (suction filter) (part no.082.12.040.50 ), spring (vld) (part no. 336.05.002.50), curtation spring (part no.082.100.080.50 ), set of pistons & springs (oil pump) (part no. 820706 to 820715), cranck case heater (part no.082.26.173.50 ), ferrule (part no.999.16.001.50 ), union nut (part no. 999.16.063.50), top housing assembly suction (part no.336.10.035.50 ), top housing assembly discharge (part no.336.10.036.50 ), reducing nipple (part no.336.14.111.50 ), ferrule (pa

corporations/Associations/Others

CTN :39874014

14 Apr, 2025 67.62 Lacs

Sealdah - West Bengal

Tender For supply of 15w - 40 diesel engine oil (q3) , engine oil 20w40 , engine oil 10w30 , hydraulic 68 tipper oil , gear oil 140 , gear oil 90 , multi purpose grease white , grease w b nlgi 3 , yellow cup grease , break oil dot 3 , break oil dot 4 , steering oil , radiator coolant , thermic super oil , transformer oil , system 46 premium hydraulic oil

CTN :39873028

21 Apr, 2025 NA

Ajmer - Rajasthan

Tender For supply of direction lamp , bearing , high pressure hose hw 2 sn 10 300 dkl , hydraulic aggregate ha 25 3 v , pump gear wheel , assy kit lined shoe , gasket assy cylinder head , gasket cylinder head cover , chain cam , gear rim , clutch disc zvs , plug , wheel bolt , oil seal

CTN :39038234

08 Apr, 2025 13.98 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin operator advanced machine tools (oamt) tradeat iti suart, gujarat, india (package 4: oamt trade) - surface grinding machine , cnc machining centre , cnc milling tools for above machine , cnc turn centre , edm , cnc simulator , vertical-spindle five-axis machining centres , cnc tool pre setter , ss and sc centre lathe (all geared) with having minimum specification , universal milling machine with minimum specification , horizontal milling machine with minimum specification , vertical milling machine , universal tool and cutter grinding machine , cnc lathe machine , tool holders to suit the cnc turn centre , jig boring , gear hubber , gear shaper machine , power saw machine-hydraulic feed system , cylindrical grinder , power saw machine , pedestal grinder double end type. , radial drill motorized with tapping attachment , drilling machine pillar type with drill chuck & key. , slotter , double column planer , shaping machine , shaping machine , co-ordinate measuring machine , cnc wire cut edm (electrical discharge machining) , special tools and equipment , involutes gear module , surface plate , marking table , scribing block universal , v-block , combination set , spanner double ended metric , adjustable spanner , reduction sleeve morse taper , angle plate adjustable , oil stone , number drill h.s.s(parallel shank) , drill (parallel shank) , twist drills , drill chuck , centre drill , grinding wheel dresser(diamond) , grinding wheel dresser hunting type , c- clamp , c-clamp , tap & die set inbox metric pitch , reamer , reamer adjustable , machine vice , machine vice , machine vice , universal machine vice , universal table angle plate , taper shank twist drill set , shaper tool holder turret type , knurling tools (set of 3) straight and diamond , carbide tipped tools of different sizes and shapes (through away tips) , micrometer outside , micrometer outside , micrometer outside , digital micrometer outside , digital micrometer outside , digital micrometer outside , digital vernier calliper , micrometer depth gauge , dial vernier calliper , vernier height gauge , vernier bevel protractor with blade , bevel gauge , telescopic gauge , sine bar , inside micrometer , inside micrometer , dial test indicator , slip gauge set (normal set) metric , plug gauges , ring gauges , snap gauge , vernier caliper , cylindrical cutter , cylindrical cutter , side and face cutter , side and face cutter , side and face cutter , side and face cutter , equal angle cutter , equal angle cutter , equal angle cutter , t" slot , t" slot cutter , t" slot cutter , t" slot cutter , single angle cutter , single angle cutter , single angle cutter , single angle cutter , double unequal angular cutter , double unequal angular cutter , end mill cutter , concave cutter , convex cutter , corner rounding cutter , corner rounding cutter , slotting cutter , slotting cutter , slitting saw cutter , slitting saw cutter , slitting saw cutter , dove tail milling cutter parallel shank , dove tail milling cutter parallel shank , dove tail milling cutter parallel shank , dove tail milling cutter parallel shank , shell & end mill cutter , shell &end mill cutter , face mill cutter with inserted tip , face mill cutter with inserted tip , face mill cutter with inserted tip , involutes gear module , air conditioner split , dg set , air conditioner , wall charts, transparencies and dvds , air conditioner , steel rule , divider , centre punch , hammer ball pane , combination plier , file flat bastard , file flat 2nd cut , engineers screwdriver , file flat smooth , cold chisel flat , try square , straight edge steel , steel tape , soft hammer , sprit level , hammer ball pein , screwdriver, heavy duty , hammer lead , screwdriver , allen hexagonal keys , angle plate , solid parallel sine pair (different size) in metric , oil can pressure feed , file flat 2nd cut , file flat smooth , fi

CTN :39847066

07 Apr, 2025 NA

Kolar - Karnataka

Tender For supply of servo transfluid a or tqa gear oil , automotive hydraulic brake fluid heavy duty , honing oil, servo hone 7xl (honilo 981) , spindle oil, servo spin 12

CTN :39237456

31 Mar, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras providing of custom bid for services - non-comprehensive amc for security equipments installed at ins kalinga - hydraulic oil hp enklo 66, hydraulic pipe 10 mts. length, oil seal, hydraulic pipe 05 mts. length, hydraulic pressure valve, gear box for boom barrier, motor for tyre killer, x-ray baggage scanner emergency button -

CTN :39038232

08 Apr, 2025 13.18 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin mechanic motor vehicle (mmv) tradeat iti tarsali, gujarat, india (package 3: mmv trade) - alternator assembly used for lmv working condition demonstration kit , starter motor assembly used for lmv working condition demonstration kit , electronic engine control module , fuel pump for mpfi working condition demonstration kit , inline fuel injection pump and rotor type fuel injection pump , demonstration board of 2wheeler ignition system. , demonstration board of electronic ignition system. , working condition of petrol mpfi engine assembly with fault simulation board , mpfi petrol engine with swiveling stand along with special tools for dismantling and assembling , demonstration board of mpfi system , ultrasonic injection cleaning equipment , working model of power windows , petrol engine motorcycle/scooter along with special tools and accessories , four stroke multi cylinder diesel engine in working condition , four stroke four cylinder crdi diesel engine in working condition , functional/experiment model of different type of sensors. , auto electrical test bench , cut section model of mock layout of a motor car -electrical system - working model , cut section working model of single plate clutch assembly. , cut section working model of diaphragm clutch assembly. , cut section working model of centrifugal clutch assembly. , front axle ( rezeppa joint) with stand for dismantling and assembly , rear axle with stand for dismantling and assembly , cut section model of synchronous gear box working , cut section model of sliding mesh gearbox working , cut section model of constant mesh gearbox working , full floating axle and semi- floating axle assembly , cut section working model of automatic transmission gear box , steering assembly - , 1. rack& pinion, , 2. worm& roller , 3. recirculating ball , 4. power steering , wheel alignment set up instrument-computerized , brake testing equipment (to test efficiency of vehicle where motion after braking is plotted) , motor vehicle in running condition (diesel heavy) with hydraulic power steering , light motor vehicle diesel crdi with electronic power steering and car a/c , engine dynamometer , four stroke multi cylinder engine mpfi petrol with cng kit set up in running condition , four cylinder four stroke diesel engine test rig with rope brake dynamometer , exhaust gas analyzer - diesel , training setup for adas systems , 4-wheel alignment set & hoist with advanced driver assistance systems (adas) complete frame targets , steel toolbox with lock and key (folding type) , punch letter , outside micrometer (0 25) , outside micrometer (25 50) , outside micrometer (50-75) , outside micrometer (75-100) , inside micrometer (25-50) , depth micrometer (0-25) , thread micrometer , adjustable micrometer sprit level to measure flatness, indication and taper with prismatic measuring base , vernier caliper , digital vernier caliper , vernier depth gauge , vernier bevel protractor, least count 5minutes , telescope gauge , dial test indicator plunger type (complete with clamping devices and stand) , universal surface gauge , cylinder bore gauge , compression testing gauge suitable for petrol engine. , vacuum gauge , granite surface plate , work bench , spanners socket with speed handle, t-bar, ratchet and universal , magneto spanner set , cylinder ridge cutter , vice grip pliers , torque wrenches , pneumatic tools set , car jet washer , pipe flaring tool , pipe cutting tool , universal puller for removing pulleys, bearings , stud extractor set of 3 , stud remover with socket handle , paraffin pressure gun , hand reamers adjustable , straight edge gauge , straight edge gauge , ladle , electric soldering iron , wire gauge (metric) , digital multi meter, 3 % digit (min), diode test mode and continuity mode, , growler , hydrometer , battery analyzer with printer , carburetor - solex, mikuni for dismantling a

State Government

CTN :39711294

11 Apr, 2025 NA

Manuguru - Telangana

Tender For corrigendum : supply of t and p materials for cam division/stage-i and ii/btps.-supply of t and p materials for cam division/stage-i and ii/btps.- heavy duty general purpose hydraulic jack,capacity:5ton,, stroke:150mm,model:xl00, hydraulic jack:, capacity:20ton,stroke length :12mm,jack closed height:lessthan 55mm., hydraulic pump specifications.no of plungers:1,maximum pressure, pump, can develop:700kg/cm2,discharge/stroke.cc:2.8,weight: <=9kg., pump with teliscopic collapsible handle, hydraulic jack,with pmp threaded,100t,150mm, make: ener pac, portable arc welding machine model tornado -201 power saource with with, 3 meters supply cable + 3 meters welding cable with holder + 3 meters, return cable with earth clamp, make : esab/l&t/ador fontec, digital vibration meter model:ird 811d, gauge,dial;range:0.01 to 20 mm, make: mitutoyo, dial guage stand magnetic on/off switch, make:mitutoyo, vernier caliper (0-150mm) code no.530-335, vernier caliper (0-300mm) code no.530-322, make:mitutoyo, outside micrometer (150-300mm) code no.104-136a, make:mitutoyo, outside micrometer (300-400mm) code no.104-142a, tubular inside micrometer code no.137-208, block,chain pulley;type:triple spur gear manual;capacity:5 t;length:20, m;make:indef;additional information:lift p-series, block,chain pulley;capacity:2 t;maxi lift:20 m, block,chain pulley;type:heavy duty triple spur gear,light weight, body;capacity:1 t;maxi lift:15 m, make: indef/demag/kito/venus, d-shackle 5ton, make: usha martin, shackle;type:d;load rating:1 t, d-shackle 2 ton, make: usha martin, shackle;type:d;load rating:3 t, make: usha martin, d shackles 10 ton lifting capacity, make: usha martin, steel wire rope slings 10 ton capacity x 6mtr long, make: usha martin, belt sling,75 mm width 4 mtrs. length of polyster duplex flat webbing, with plain loops at both ends safety factor 7:1., make: usha martin, circlip;type:plyer;size:195 mm;additional information:ptno 1441-7internal nose, hand operated high pressure grease gun with all accessories(hose,nipples & trolley arrangement)-5kg capacity, allen keys set,1/16'' to 3/8'', feeler gauge, thickness: 0.03 to 0.5mm, no of leaves: 13 (long leaves),series: 184, make:mitutoyo, universal sets adjustable spanner 1171 cp insulation plier 162-8j,s.d.932&859, spanner set,double open end;size:32x36 mm;material:chrome vanadium/carbon steel, taparia make heavy duty pipe wrench ,length-450 mm,least max opening 73mm,product no-hpw 18, make:tapparia/mekastar/stanley/torquestar, taparia make heavy duty pipe wrench ,length-250 mm,least max opening, 48mm,product no-hpw 10, make:tapparia/mekastar/stanley/torquestar, d spanners set, 12nos, 6-32 mm, make: jhalani, bench vice,150 mm, ring spanner 6-32mm, hand pump, for oil barrel, hand greaqse gun, capacity:1kg, spanner,mekaster double ended deep offset ring spanner,chrome vanadium, steel chrome plated,wave profile having a/f size (mm):32x36 confirming, to din 838,iso 3318,10103,10104&691.,part no.mdrm-3236, spanner,mekaster double open ended spanner chrome vanadium, steel,chrome plated,position of open ends 15 degree having a/f size, (mm): 36x41 confirming to din 3110,899,iso 1711,10102,691&3318,part, no.mdom-3641, mekaster double ended deep offset ring spanner, chrome vanadium steel, chrome plated, wave profile having a/f size (mm):41x46 confirming to, din 838, iso 3318, 10103, 10104 & 691.,part no.mdrm-4146, spanner set,double open end;size:41x46 mm;material:chrome, vanadium/carbon steel, 400 amps inverter welding rectifier.model: buddy arc 400i, make esab, l and t, ador, fontec, chain pulley block,5t,10m, make - indef, demag, kito, venus, block,chain pulley;type:p;capacity:2 t;maxi lift:10 m, make - indef, demag, kito, venus, block,chain pulley;type:p;capacity:3 t;maxi lift:10 m, make - indef, demag, kito, venus, self supporting extendable aluminum ladder size; 16feet(closed) to 27, feet (extended), wire rope slings with eye & eye, 25ton x 1 1/4 x 6 mtrs length., make usha martin

Oil Pump Gear Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Central Government/Public Sector

corporations/Associations/Others

State Government