Tender For supply of outdoor type , plinth mounted, distribution transformer, minimum energy efficienc y level 3 of rating 500kva,3-phase, 11kv/415-240v, 50hz, oil immersed, non- sealed type (transformer ta nk body and cover are bolted), copper wound, primary winding in delta and secondary winding in star (ve ctor symbol- dyn11), onan cooled transformer, conforming to is 1180 (part1):2014 with amendment nos. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in clause 20.1 of is 1180 (part 1) latest with condition that drain-cum-sampling valve. oiltemperatureindicator & winding temperatureindicators will be provided as per clause 20.2 f) of is 1180 (part 1 terminal arrangement: the transformers shall be fi tted on high voltage and low voltage sides bushing appropriate voltage and current ratings., low voltage si de cable end box required. the high voltage bushings (3nos.) shall conform to is/iec 60137. the low voltag e bushings (4 nos.) shall conform to is 7421. off-circuit tap changer (applicable for all ratings above 200 k va) for variation of hv voltage from +5% to -10% in steps of 2.5%. [ warranty period: 30 months after th e date of delivery ]
Tender For supply of outdoor plinth mounted distribution transformer of rating 500 kva, 3-phase, 50hz , oil immersed, non-sealed type (transformer tank body and cover are bolted), primary winding in delta a nd secondary winding in star (vector symbol dyn11), onan cooled transformer, conforming to is 1180 (p art 1):2014 with amendment nos. 1,2,3,4 or latest, and supplied with all standard fittings mentioned in cla use 20.1 of is 1180 (par1) latest with condition that drain-cum sampling valve will be applicable for all cap acity of transformers. oiltemperatureindicator & winding temperatureindicators (for transformers above 200kva) will be provided as per clause 20.2 f) of is 1180 (part 1). terminal arrangement: the transformers shall be fitted on high voltage and low voltage sides with outdoor type bushings of appropriate voltage and current ratings. the high voltage bushings (3 nos.) shall conform to is/ iec 60137.the low voltage bushings (4 nos.) shall conform to is 7421. suitable cable-end box along with cable entry hole glands is to be provid ed as follows: a) for outdoor type: l.t. side b) for indoor type: h.t. side & l.t. side. along with following de tails: (i) kva rating of required transformer: 500kva (ii) no load voltage ratio: 6kv/415v-240v (iii) type o f mounting: plinth: (iv) the type of tap changer: off- circuit tap changer for variation of hv voltage from + 5% to -10% in steps of 2.5% (v) outdoor type (vi) energy efficiency level (latest)- 3 or higher. [ warranty p eriod: 30 months after the date of delivery ]
Tender For 2nd call for budgetary offers for supply of winding temperatureindicator (wti)/ oiltemperatureindicator (oti), repeaters for ict & tfr and calibration of existing wti/oti at 400kv chakan substation under 400kv r.s. o&m division, chakan
Tender For supply of outdoor type, plinth mounted, oil immersed, copper would, non-sealed type (transformer ta nk body and cover are bolted) distribution transformer 500 kva rating, 11 kv/415v, 3-phase, 50hz, primar y winding in delta and secondary winding in star (vector symbol -dyn 11) onan cooled, off-load tap chan ger for variation of hv voltage from +5% to 10% in steps of 2.5%, with all standard fittings as per clause 2 0.1 of is 1180 (part 1) and oiltemperatureindicator & winding temperatureindicators, drain-cum-sampling valve with steel plug, energy efficiency level - 2 and above, conforming to is 1180 (part 1):2014 with amen dment nos. 1,2,3 and 4 or latest. make and description: as per latest cee description no ser/elec/gs/des cription/trans/4/rev-0/oct 2023, vide ltr no cee/s/185/519/genl. dated 10/10/2023 or latest, issued fr om pcee office time to time. make: indian make is approved [ warranty period: 30 months after the date of delivery ]
Tender For inviting the rates for electrical material for water supply electrical system for fy 2025-26 in municipal council shahdol - inviting the rates of maintenance of street light fittings and other luminaires lighting for financial year 2025-26 in municipal council shahdol, 75 hp motor pump, d6315 c3 for motor, n6313 c3 for motor, 6308 for pump, 60 hp tarwain motor pump, d6313 for motor, n6312 for motor, 150 hp motor pump, 6319 c3 for motor, 6316 c3 for motor, 6309 c13 for pump, 100 hp for tarwain, 3232 upper for motor, 6316 lower for motor, 100 hp for motor head, 7320- pecbm germany, 7320- becbm- w35d germany, 125 hp for motor, hu317 c3- 6317 c3 for motor, contector for 150 hp, mnx-140, mnx-110, contector for 125 hp, ith 250 alcif 150a, ith 250a, 100 hp for, ml- 6, ml-4, auto switch, sz5, sdz5, timer, et 100 (0 to 3), st 100, relay, 10 a max 2 to 3.3, max 63 a, main switch, 315 fh, 250 amp, 250 amp fsc, mcb, mcb 400 amp, mcb 800 amp, hrc fuse, 250 amp, 315 amp, 125 amp, 400 amp, 800 amp, 100 amp, 63 amp, cooled meter, 0-600, 0-500, ampere meter, 0-500, on off switch, capacitor, 20 kvar, 5 kvar, 10 kvar, 30 kvar, 25 kvar, 50 kvar, pvc tape, raw rubber, unarmoured cable 300 mm alluminium, terminal plate (150,125,100,75,60 hp), dol starter 3hp, 5 hp, footwall 150 hp (ms/ci), footwall 125 hp (ms/ci), cover starter 20 hp mvg 20, starter 100hp, 50 hp, 75 hp, 60 hp), lugs copper, lugs copper 35 a, lugs copper 50 a, lugs copper 85 a, lugs copper 150 a, lugs copper 185 a, lugs copper 240 a, lugs copper 300 a, lugs copper 40 a, lugs copper 70 a, lugs copper 45 a, lugs copper 75 a, lugs copper 100 a, lugs copper 90 a, lugs copper 125 a, lugs copper 135 a, lugs copper 200 a, lugs copper 225 a, lugs alluminium, lugs alluminium 35 a, lugs alluminium 50 a, lugs alluminium 85 a, lugs alluminium 150 a, lugs alluminium 185 a, lugs alluminium 240 a, lugs alluminium 300 a, lugs alluminium 40 a, lugs alluminium 70 a, lugs alluminium 45 a, lugs alluminium 75 a, lugs alluminium 100 a, lugs alluminium 90 a, lugs alluminium 125 a, lugs alluminium 135 a, lugs alluminium 200 a, lugs alluminium 225 a, nut bolt wheel washer, 4 sut 3.5 inch, 6 sut 4 inch, 5 sut 4 inch, 5 sut 3 inch, 4 sut 4 inch, 4 sut 3 inch, 3 sut 3 inch, 2.5 sut 2 inch, stut nut bolt 125 hp 19 no 3 inch tall, stut nut bolt 125 hp 19 no 4 inch tall, ledule, mechanical mj wire 16 ", cutter machine, cutter blade, cutter blade stone, drill machine, screw panna 12 ", tester, clamp meter, multi meter, reti (file) 12 ", glain dori 3,4,5 sut, appl paper, s l d set, hexa frame, hexa blade, wiring pooler 1.5 feet, gotti panna set, rami set including adjuster, grass cutter seccor big and small, grass cutter machine big and small, greece, mobi oil 20 w 40, gear oil 100- 68, transformer oil, tarwain pump for ms pipe 8.5 meter- 1.5meter wheel switch, connecting rod 1.4"x1.5" meter, connecting soket 1.5"x4", spider 8" trappa, spider cuse, checknet 2"x2", copper cable 50 mm 4 core, alluminium cable 50 mm 4 core, earthing plate 1x1 feet copper, fan belt b88lp/b33, fan belt b3040lp/b118, tool box complete ring and pana, greece gun, screw driver in all sizes pin and star, transormer bushing 315 kva (11 kv), transformer bushing 500 kva (11 kv), oiltemperatureindicator 315 kva transformer, binding temperatureindicator 315 kva transormer, oiltemperatureindicator 500 kva transformer, binding temperatureindicator 500 kva transormer, submercible copper cable 2.5sqmm 4 core, submercible copper cable 4sqmm 4 core, alluminium cable 150 sqmm single core, alluminium cable 180 sqmm single core, alluminium cable 300 sqmm single core, distilled water for battery, exide/luminous battery 1500mh, l&t/l&k switch disconnector fuse for 315, l&t/l&k switch disconnector fuse for 315 fn400, l&t/l&k switch disconnector fuse for 315 fn630, control panel 75 hp motor, control panel 150 hp motor, control panel 125 hp motor, steel nail, iron nail, 200 amp transormer distribution box, is/iec/din type fuse 200
Tender For supply of outdoor type, plinth mounted, oil immersed, copper would, non-sealed type (transformer ta nk body and cover are bolted) distribution transformer 100 kva rating, 11 kv/415v, 3-phase, 50hz, primar y winding in delta and secondary winding i star (vector symbol -dyn 11) onan cooled, off-load tap chang er for variation of hv voltage from +5% to 10% in steps of 2.5%, with all standard fittings as per clause 20. 1 of is 1180 (part 1) and oiltemperatureindicator & sinding temperatureindicators, drain-cum-sampling v alve with steel plug, energy efficiency level - 2 and above, conforming to is 1180 (part 1):2014 with amend ment nos. 1,2,3 and 4 or latest. make and description: as per latest cee description no ser/elec/gs/desc ription/trans/4/rev-0/oct 2023, vide ltr no. cee/s/185/519/genl. dated 10/10/2023 or latest, issued fro m pcee office time to time. make: indian make is approved [ warranty period: 30 months after the date of delivery ]