Latest onion dehydration plant Tenders | Government onion dehydration plant Tenders

Central Government/Public Sector

CTN :45365796

04 Jul, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fu

CTN :45712846

07 Jul, 2026 NA

Multi City - Multi State

Tender For supply of general tool kit with tool box,mechanical creeper,allen key set,ratchet set 46 pcs,impact wrench,cordless drill machine,tool kit drill machine for drone

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

CTN :45712285

13 Jul, 2026 NA

Multi City - Multi State

Tender For providing of custom bid for services - annual maintenance contract of electronic electro mechanical weighing machine installed at mill gate and out cane centers

CTN :45690519

09 Jul, 2026 NA

Parganas - West Bengal

Tender For providing of custom bid for services - mechanical overhzation with necessary accessories for restoration of m/s nagel special machines (p )ltd make 2 spdl vert honing machine, rfi regd no- 1287 7 at barrel section on whole job basis, details & condition as per

corporations/Associations/Others

CTN :44823326

29 Jun, 2026 1.99 Lacs

Nashik - Maharashtra

Tender For bid to ras supply of mechanical component for machine d d ? g? g - lh support plate of exhaust bin , rh support plate of exhaust bin , front and rear drive shaft of exhaust bin , base plate of exhaust bin , bottom pulley housing , lh and rh tensioner pulley , bottom pulley guide plates lh and rh , center tensioner pulley , mxl belt pulley , bin supports lh and rh

State Government

CTN :45696572

01 Jul, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

Central Government/Public Sector

CTN :45571818

29 Jun, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : procurement of rotary hammer concrete drill bits mechanical tools 10 items - mechanil items, rotary hammer(4-22mm drill dia), concrete drill bit, 6mmx100mmx160mm, concrete drill bit, 8mmx100mmx160mm, concrete drill bit, 10mmx150mmx210mm, concrete drill bit, 12mmx150mmx210mm, concrete drill bit 22mm, concrete drill bit 20mm x 400mm, mechanical tools kit, magnetic drill set, electrical drilling machine 600w

corporations/Associations/Others

CTN :45698831

14 Jul, 2026 NA

Thiruvananthapuram - Kerala

Tender For auction sale of mixed scrap items,aluminium foil and aluminium scrap,copper foil and copper scrap,mixed chips and aluminium, ss and ms,e- waste items,plastic scrap of various sizes,forklift truck,5 ton capacity voltas diesel forklift,8 ton capacity godrej diesel forklift,fabrication waste aluminium,fabrication waste mixed steel (ms, ss, al etc),mixed chips (ferrous and non ferrous,transformer along with terminal connectors (6 nos),vacuum transformer oil conditioning plant,3 ton hot crane,ms barrels of 210 l cap,dismantled parts of single grider 5 ton eot crane,15t old material handling crane (5 pieces),unservicable mechanical items,hmt lathe,cnc edm machine,titanium scrap (mesh, chips and tubes)

State Government

CTN :45671132

01 Jul, 2026 NA

Ranchi - Jharkhand

Tender For basic rate of materials for inclusion in the schedule of rates for government of jharkhand to be used in different civil construction / infrastructure works and repair works.- providing and supplying in standard lengths high density polyethylene pipe (hdpe pipe) note: the rates are f.o.r. at work site in jharkhand but exclusive of gst & c.p. (confirming to is 4984-4984/14151/12786/13488 (latest revision with necessary jointing materials like mechanical connector i.e. thread/insert joint/quick release coupler joint/compression fitting joint or flanged joints excluding coupler/specials and taxes), hdpe pipe of materials grade pe100-pn06 (dia in mm), 25 mm dia, 32 mm dia, 40 mm dia, 50 mm dia, 63 mm dia, 75 mm dia, 90 mm dia, 110 mm dia, 125 mm dia, 140 mm dia, 160 mm dia, 180 mm dia, 200 mm dia, 225 mm dia, 250 mm dia, 280 mm dia, 315 mm dia, 355 mm dia, 400 mm dia, 450 mm dia, 500 mm dia, hdpe pipe of materials grade pe100-pn10 (dia in mm), 25 mm dia, 32 mm dia, 40 mm dia, 50 mm dia, 63 mm dia, 75 mm dia, 90 mm dia, 110 mm dia, 125 mm dia, 140 mm dia, 160 mm dia, 180 mm dia, 200 mm dia, 225 mm dia, 250 mm dia, 280 mm dia, 315 mm dia, 355 mm dia, 400 mm dia, 450 mm dia, 500 mm dia, medium density polyethylene pipe (mdpe pipe) in standard length with necessary jointing materials like mechanical connector i.e., thread / insert joint / quick release coupler joint / compression fitting joint or flanged joints. note: the rates are f.o.r. at work site in jharkhand but exclusive of gst & c.p. (conforming to iso 4427:1996)., mdpe pipe of materials grade pe 80, pn16, 20 mm dia, 25 mm dia, 32 mm dia, 40 mm dia, 50 mm dia, 63 mm dia, 75 mm dia, 90 mm dia, 110 mm dia, 125 mm dia, 140 mm dia, 160 mm dia, 180 mm dia, 200 mm dia, 225 mm dia, 250 mm dia, 280 mm dia, 315 mm dia, mdpe pipe of materials grade pe 80, pn12.5, 20 mm dia, 25 mm dia, 32 mm dia, 40 mm dia, 50 mm dia, 63 mm dia, 75 mm dia, 90 mm dia, 110 mm dia, 125 mm dia, 140 mm dia, 160 mm dia, 180 mm dia, 200 mm dia, 225 mm dia, 250 mm dia, 280 mm dia, 315 mm dia, mdpe pipe of materials grade pe 80, pn10, 20 mm dia, 25 mm dia, 32 mm dia, 40 mm dia, 50 mm dia, 63 mm dia, 75 mm dia, 90 mm dia, 110 mm dia, 125 mm dia, 140 mm dia, 160 mm dia, 180 mm dia, 200 mm dia, 225 mm dia, 250 mm dia, 280 mm dia, 315 mm dia, mdpe pipe of materials grade pe 80, pn8, 20 mm dia, 25 mm dia, 32 mm dia, 40 mm dia, 50 mm dia, 63 mm dia, 75 mm dia, 90 mm dia, 110 mm dia, 125 mm dia, 140 mm dia, 160 mm dia, 180 mm dia, 200 mm dia, 225 mm dia, 250 mm dia, 280 mm dia, 315 mm dia, mdpe pipe of materials grade pe 80, pn6, 20 mm dia, 25 mm dia, 32 mm dia, 40 mm dia, 50 mm dia, 63 mm dia, 75 mm dia, 90 mm dia, 110 mm dia, 125 mm dia, 140 mm dia, 160 mm dia, 180 mm dia, 200 mm dia, 225 mm dia, 250 mm dia, 280 mm dia, 315 mm dia, manufacturing, providing and supplying spirally welded/ erw/ saw / fabricated m. s. pipes (commercial quality) including procurements of plates, gas cutting to required size rolling, tack welding assembling in suitable lengths to form pipes welding on automatic welding machine and forming ‘v’ edge on both ends of pipes in all respect, etc. complete (no negative tolerance in thickness is permissible). note: the rates are f.o.r. at work site in jharkhand but exclusive of gst & c.p. (conforming to is: 3589 and is: 5504), dia of pipe: 100 mm (i.d.), thickness of pipe:, 6mm thick, 8mm thick, 10mm thick, dia of pipe: 200 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 250 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 300 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 350 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 400 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 450 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 500 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 550 mm (i.d.), thickness of pipe:, 6 mm, 8 mm, 10 mm, dia of pipe: 600 mm (i.d.), thickness of pipe:, 6 mm, 8

Onion Dehydration Plant Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

State Government

Central Government/Public Sector

corporations/Associations/Others

State Government