Latest ornamental gate Tenders | Government ornamental gate Tenders

CTN :38893665

05 Feb, 2025 NA

Budgam - Jammu And Kashmir

Tender For bid to ras supply of heavy duty steel full bullet proofing of mahindra scorpio vehicle with bp sheet 6 point 5 mm for 2 x scorpio and 1 x 2.5 ton , 50 mm z glass extra clear set front wind screen 04 doors diki door and 1 front mirror complete set for scorpio , heavy duty suspension and mechanical work with spares 2 scorpio , full vehicle computerised matt finish panting with material for scorpio , sealant tube original for fixing of glasses 2 scorpio and 1 x 2.5 ton vehicle , nut bolts , f3d matting full set for scorpio , all glasses black film for 2 scorpio , poly carbonate fibre sheet for floor splinter proof of 2 scorpio and 1 x 2.5 ton , mig roll for sheet welding , bp sheet cover full set with material for 2 scorpio , glass bp frames with material for scorpio , labour fitting charges of two scorpio and one 2.5 ton , 50 mm bullet proof with pupc extra clear glass wind shield front glasses 33 inches by 24 inches for 2.5 ton , 50 mm bullet proof with pupc extra clear glass driver co-driver 18 inches by 12 inches for 2.5ton , 50 mm bullet proof with pupc extra clear glass right left and rear side of body 8 inches by 12 inches for 2.5 ton , full vehicle computerised paint with material internal and external for 2.5 ton , heavy duty hydraulic jack with container for cabin up and down for 2.5 ton , normal iron sheet for roof top of 2.5 ton vehicle , door lock rh and lh and rear side of 2.5 ton vehicle , welding rod , plasma cutting wheel , normal iron pati for glass frames with material for 2.5 ton , heavy duty hinges for doors of 2.5 ton vehicle , heavy duty hinges for doors of two scorpio vehicle , hinges and lock for kapola of 2.5 ton vehicle , beeding with material for kapola of 2.5 ton vehicle , safety net for glasses with material of 2.5 ton vehicle , angle for safety net of 2.5 ton vehicle , 2 inches iron pipe for doors frame of 2.5 ton vehicle , 1 inch iron pipe for kapola frames 20 feet , gun slot for 2.5 ton

Central Government/Public Sector

CTN :39171182

22 Feb, 2025 40.00 Lacs

Tezpur - Assam

Tender For repair replacement certain maint work various location at misa camp under ge s tezpur - taking down chowkhats incl shutters (without taking off shutters from the frame exc 1.5 sqm and n.exc 4 sqm each ,complete all as specified and directed., taking down chowkhats incl shutters (without taking off shutters from the frame n exc 1.5 sqm ,complete all as specified and directed., taking down shutter of any description not exc 1 sqm each,complete all as specified and directed., taking down shutter of any description exc 1 sqm but nexc 2 sqm each,complete all as specified and directed., taking down and refixing of shutters of any description exc 1 sqm but n. exc 2 sqm each in same opening with necessary hinges , screws complete all as specified and directed., dismantling of ac sheet corrugated / semi corrugated sheets/ cgi sheets in wall cladding or in roof covering,complete all as specified and directed., m & l pre- painted galvalume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with l type j type or cranked hook bolts complete all as specified and directed., s&f pre- painted galvalume aluminum zinc coating gi based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridges, roof covering/clading /eaves board to wall and fixed with self tapping screws complete all as specified and directed., dismantling wall and ceiling board or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed., m&l aluminium powder coated snap grid false ceiling of size 600 mm x 600 mm x 4 mm thick for fixing boards/files with aluminium anodised main t section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides including hanging arrangements with 1.6mm dia gi wire and anodised adjuster complete all as specified and as directed., m & l 4mm thick non asbestos fibre cement building board fixed/inserted to aluminium frame work, as in ceiling complete all as specified and as directed., m&l mild steel flat iron 25 x 3 mm, as in holdfast for door, window frames or chowkats etc., cut to length or drilled hole and fixed with screw, etc., grade of steel conforming to fe-290 gde e-165, complete all as specified and as directed., m&l pressed steel frames for doors with one or more rebates size of frame 105 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.note :- pressed steel frame should be filled with pcc 1:3:6 type c-0 (using 12.50mm graded stone aggregate) and cost of pcc shall be deemed included in quoted rate., m&l pressed steel frames for doors with one or more rebates size of frame 125 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.note :- pressed steel frame should be filled with pcc 1:3:6 type c-0 (using 12.50mm graded stone aggregate) and cost of pcc shall be deemed included in quoted rate, s&f 35 mm thick factory made flush shutter , solid core construction ,with block board core and plywood face panel ,commercial type on both side,complete all as specified and directed., s/f 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc. divided into squares with plain chamfered or rounded, rebated sash bars, sizes of the members of the shutters complete all as specified and directed., s & f factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of m.s.tubes for top & bottom rails.m.s.frame shall be covered with heat moulded plain colour pvc "c" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colo

CTN :39161250

06 Feb, 2025 4.98 Lacs

Midnapore - West Bengal

Tender For petty repair of aluminium window glass change, iron doors and ground floor inside painting work of academic building at pts, salua under the d.i.g training cum principal, salua during the year 2024-25

Central Government And Public Sector

CTN :39129150

19 Feb, 2025 NA

Hyderabad-T - Telangana

Tender For supply of coconut brooms , soft brooms , cobweb brooms , torch cells big , duster cloth , sponges , plastic buckets , plastic pots , plastic mugs , bulbs cfl , tube lights , plastic dust bins , novino torch light 4 cells , sickles , iron paddles , axes , spades , motor pans , napthalene balls , long handle brushes coir , harpic 500 gm , hit 500 gm , odonil pkts , locks for doors and gates , floor cleaner , door mats , surf or nirma , plastic pipe for cleaning purpose , hand wash liquid , bleaching powder , phenyl

Central Government And Public Sector

CTN :39129180

19 Feb, 2025 NA

Hyderabad-T - Telangana

Tender For supply of consumable material for thousand pillar temple - coconut brooms , soft brooms , cobweb brooms , torch cells big , duster cloth , sponges , plastic buckets , plastic pots , plastic mugs , bulbs cfl , tube lights , plastic dust bins , novino torch light 4 cells , sickles , iron paddles , wooden ladders , axes , napthalene balls , long handle brushes coir , stick brooms , harpic 500 gms , odonil pkts , locks for doors and gates , floor cleaner , doot mats , surf nirma , plastic pipe for cleaning purpose , hand wash liquid , bleaching powder , phenyl

CTN :39129771

19 Feb, 2025 30.11 Lacs

Liluah - West Bengal

Tender For providing of custom bid for services - unforeseen emergency based petty repairday to day maintenance of engineering assets such as pipe line sanitary installation doors windows wooden structures masonry structure iron structure roofing sheet gutters iron doors ..

CTN :39114189

17 Feb, 2025 NA

Barmer - Rajasthan

Tender For supply of vehicle roof and side covering modification with galvanized rust protected , veh rear side covered with galvanized iron with 03 ft x 06 ft entrance door , radio storage rack size 3 ft x 7 ft with support of angle iron made of 18 mm plywood , battery storage rack size 3 ft x 7 ft with support of angle iron and doors , box size 06 ft x 02 ft made of galvanized iron sheet angle iron and plywood , table with storage size width 2 ft x height 4 ft x length 06 ft made of galvanized iron and 18 mm plywood , ladder for climbing into veh with 05 step 150 kg carrying load capacity , antenna bracket , cooler stand , 8 module wiring for power supply , labour charge

CTN :39100365

17 Feb, 2025 32.15 Lacs

Dehradune - Uttarakhand

Tender For tender for supply of centre table of size 1194 mm x 584 mm x 460 mm , made out of 70x35mm teak wood frame work and 45x45 mm teak wood rnouled legs , top to have 19 mm thick ply with 1mm thick laminated top , edges to have 30mmx30mm teak wood moulding finished with melamine polish all complete (supplier will get the sample approved before supply from estate manager , emu dehradun) , steel almirha large , material of almirah doors m s sheet , sheet thickne ss of door 1.0 mm , sheet thickness of sides , back , top and bottom 1.0 mm , sheet thickness of shelves 1.0 mm , sheet thickness of pedestal in mm 1.0 mm , material of lock brass and finish power coating , number of doors (nos) 2 , door stiffner upto full door height , provided with the almirah doors lock , height (without pedestal) (in mm) (+/- 10 min) 2000 , width (+/- 7 mm) 910 milimeter , depth (+/- 5 mm) 486 millimeter , inside shelves , pedestal height 125mm and width 100mm. (supplier will get the sample approved before supply , from estate manager , emu dehradun) , dinning chair made of second class teak wood , seat cusion 40 density 75 mm thick , upholstery cotton fabric 450 gsm , with back rest with cushion , material of frame wood , chair height (overall) +10mm 1050mm , backrest width +10mm 450 , width of seat +10mm 450 , depth of seal in of seat in mm (+/- 10 mm) 400 , heght of seat in mm (+/- 5 mm) 425 , seat finish cushioned , all exposed wooden surfaces will be melamine polished all as specified (supplier will get the sample approved before supply , from estate manager , emu dehradun) , sofa of two seater made out of 50 x 25 mm second class hard wood frame and upholstered 100 mm rubber foam in seat , back rest of 50 mm rubber foam fully upholstered with wooden arms , teak wood finish melamine polish etc all complete godrej interio aristocrat or equivalent . (supplier will get the sample approved before supply , from estate manager , emu dehradun) , sofa of single seater made out of 50 x 25 mm second class hard wood frame and upholstered 100 mm rubber foam in seat , back rest of 50 mm rubber foam fully upholstered with wooden arms , teak wood finish melamine polish etc all complete godrej interio aristocrat or equivalent . (supplier will get the sample approved before supply , from estate manager , emu dehradun) , utility table of size 900 mm x 900 mm x 460 mm , made out of 35x45mm teak wood frame work and 45x45 mm teak wood rnouled legs , top to have 19 mm thick ply with 1mm thick laminated top , edges to have 30mmx30mm teak wood moulding finished with melamine polish all complete (supplier will get the sample approved before supply from estate manager , emu dehradun) , supply of single bed of size 1950 x 930 x 325 mm made out of teak wood side of size 120 x 30 mm and foot board with 75 x 25 mm second class teak wood frame covered with 4 mm thick one side teak ply and other side 6 mm thick commercial ply on bed back side with 40 x 9 mm thick teak wood lipping on edges and 50 x 25 mm support of second class hard wood and 12 mm thick commercial ply on bed top with melamine polish on all exposed surfaces and primer coat on rest of surfaces etc. as per directed by engineer-in-charge all complete. (supplier will get the sample approved before supply , from estate manager , emu dehradun) , key box with key hooks , acrylic covered lockable key box of size 40inchx40inch with 50 nos of key hooks covered with acrylic shutter all as specified (supplier will get the sample approved before supply from estate manager , emu dehradun) , notice board , width of board in mm 1200 mm , colour (front/ display layer) green , height of board in mm 900mm , front cover material of board acrylic (minimum 2 mm thickness) , rear panel material of board galvanised iron sheet , overall pinability depth of board in mm 8 millimeter , core material thickness in mm(n greater equal 9) 9 millimeter , orientation portrait / landscape , type of front cover with lockable front cover , double door wit

Central Government And Public Sector

CTN :39075342

13 Feb, 2025 11.05 Lacs

Chandigarh - Chandigarh

Tender For supply and installation of necessary equipment for updating the fire and safety system installed in regional office, chandigarh - diesel engine driven main fire pump supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (diesel driven pump) horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to is 1520. suitable hp, 1500 rpm water cooled with radiator, diesel engine conforming to relevant is standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. m.s fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. suitable cement concrete foundation duly plastered and with anti vibration pads.(for 1620 lpm at 56 m head) note- the head of the pump is selected in a manner so as to give a minimum 3.5 kgf/cm2 pressure at the highest farthest point., control panelfabrication, supply, installation testing & commissioning of electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick crca sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per cpwd specification with following in coming and outgoings, suitable for operation on 415v, 3 phase, 50hz ac supply with enclosure protection class ip 42 as required :incoming250a, 50ka 4 pole mccb, ics=100% icu rating ,digital voltmeter 0-500v with selector switch digital ammeter (0-250 a) with selector switch & cts etc. led type ryb phase indicating lamps, on, off, trip indicating lamps, set of copper bus bar 300a.outgoing( note : all outgoing feeders for pumps should have digital ammeter with selector switches, and led type on, off, trip indicating lamps)main fire pump125 a, 50ka tpn mccb, ics=100% icu, with fully automatic star/delta starter suitable for 60 hp pump with overload protection, current sensing type single phase preventer complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/off operation.jockey pump63 a, 50ka tpn mccb, ics=100% icu, with suitable hp fully automatic star/delta starter with overload protection, current sensing type single phase preventer complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/off operation.diesel engine controlcontrol for diesel engine comprising -automatic/manual selector switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode indicating lamp for high/ low lub. oil pressure, high water temp and engine on indication, battery charger suitable for 12v/24 v dc with boost and trickle selector switch, 0-30 v dc volt meter, and 0- 20 a dc ammeter. all standard relays and accessories for automatic operation of diesel enginesystem controllerdesigning, supply, installation, testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, pressurization pump, terrace pump in sequence as per specification consisting of relays, timers. sensors, annunciat

Central Government/Public Sector

CTN :39051325

13 Feb, 2025 NA

Bangalore - Karnataka

Tender For supply, installation, testing and commissioning of laboratory furniture, modular furniture and unified av solution for mbu, iisc bangalore - c-frame modular furnitureproviding and supply of c-frames manufactured from standard hollow metal sections; confirming to i.s. code 7138:1973 (indian standard specification for steel tubes for furniture) and all sheet metal components to be of crca confirming to is code 513:1994. the suspended under-bench fully welded units shall be supported on heavy-duty steel frames fully carrying the load of worktops.. its superior strength is combined with aesthetically appealing end caps shall give maximum flexibility and modularity while making a layout. c-frame shall be constructed from a rectangular pipe with a cross section of 60mm x 30mm and shall be 2 mm thick and shall be without a vertical front leg to give a clean look. the c-frame legs shall be supplied with adjustable feet (tolerance from -5mm to +20mm) to correct the unevenness of flooring. the tubular enclosed type construction shall discourage dust accumulation and unwanted development of bacteria & fungus. drainage gradient shall be well adjusted throughout the length of table and shall have horizontal supports for drainage systems. the structure shall have a removable back panel to provide access for maintenance throughout the length of table. the c-frame shall also have skirting at back bottom side. the c-frame shall be suitable for sitting and standing nominal heights of 750mm & 900mm respectively. the nominal table depths shall be 620 mm, 770 mm and 920 mm for wall side and 1540mm, 1840mm for island tables. the corner units shall fit well with 770mm & 920mm table depths. all frame-work is to be pre-treated with superior pure epoxy powder coated finish. all metal panel shall go through 9 tanks pretreatment process including 3 stages iron phosphating process. (process names: 1. hot water rinse -> 2. knock off degreasing -> 3. degreasing i -> 4. degreasing ii -> 5. water rinse i -> 6. water rinse ii -> 7. iron phosphating -> 8. water rinse iii -> 9. passivation), common 750 ht.c-frame assy. for table depths 770 wall side without upright , 1540 island without upright & 920 wall side with upright, l.h. 750 ht.c-frame assy. for table depths 770 wall side without upright , 1540 island without upright & 920 wall side with upright, r.h. 750 ht.c-frame assy. for table depths 770 wall side without upright , 1540 island without upright & 920 wall side with upright, common 900 ht.c-frame assy. for table depths 770 wall side without upright , 1540 island without upright & 920 wall side with upright, l.h. 900 ht.c-frame assy. for table depths 770 wall side without upright , 1540 island without upright & 920 wall side with upright, r.h. 900 ht.c-frame assy. for table depths 770 wall side without upright , 1540 island without upright & 920 wall side with upright, providing and supply of welded cabinets under bench floor mounted cabinets shall be flush face construction with doors and drawers in the same plane as the cabinet face frame, without overlap. the moc: ms crca: is 513 (1994). thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel shall be of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel shall be of 0.8mmthk.finish: powder coating pure epoxy, thickness 40-50 micronshandle: anodized aluminium finish handles (d-type or recess-type) lock: units have a locking facility with 180 deg. and 10 lever cam lock mechanism (except for sink and corner unit). hinge: ss 304 knuckle barrel hinge of thickness 2.5mm and opening angle 180 deg. screw: ss 304. ball slide: high quality double extension drawers of 500mm length (approved make) (required only for drawer unit) shutter is of twin type construction with sound dampening effect using profeel. shutter cover is equipping with bump on for sound dampening. depth of the cabinets: 53

Ornamental Gate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector