Latest oxide primer Tenders | Government oxide primer Tenders

CTN :38661943

24 Feb, 2025 NA

Chandigarh - Chandigarh

Tender For bid to ras bid to ras supply of misc items - dr fixit pidilite urp in 01 ltr packing , dr fixit 01l silicon , dual directional reflective speed raising breaker 3 meter long 03 black 03 yellow breakers with installation with raising , gi wooden screw 15 mm 200 nos in pkt , gi wooden screw 20 mm 200 nos in pkt , gi wooden screw 25 mm 200 nos in pkt , gi wooden screw 30mm 200 nos in pkt , gi wooden screw 35 mm 200 nos in pkt , gi wooden screw 50 mm 200 nos in pkt , liquid rubber solutionfor water prooofing with reinforcement fabric , paint enamel in one ltr packing af blue , plain glass 3ft x 6ft 3mm thick , pvc bend pipe for low level cistern 32mm , pvc internal fitting kit for low level cictern complete , pvc lid for oht cap 500 ltr , steel screw 13 to 6 pack of 500 pcs , steel screw 19 to 6 pack of 500 pcs , steel screw 19 to 8 pack of 500 pcs , steel screw 25 to 6 pack of 500 pcs , steel screw 32 to 8 pack of 500 pcs , solar sparkle cat eye of aluminium pressure die casted body of size 115 x 100 x 22 mm as per required , thread cotton , white cement grout , window glass sheet 3mm thick 4ft x3ft plain , capacitor 2.5 mfd , empire tape 20mm , high pressure cut off switch for ac , ht insulation tape 20mm , insulation tape 20mm x 25mtr , insulation tape 25mm x 25mtr , mcb tpn 100 amp , pvc casting caping round size 19 or 20mm double lock , step fan regulator 2 module , aluminium thimble of size 35sqmm dowells or barco or jainson lugs or comet lugs , aluminium thimble of size 95sqmm dowells or barco or jainson lugs or comet lugs , aluminium thimble of size 70sqmm dowells or barco or jainson lugs or comet lugs , aluminium thimble of size 240sqmm dowells or barco or jainson lugs or comet lugs , aluminium thimble of size 400sqmm dowells or barco or jainson lugs or comet lugs , sheet metal enclosure with provision of mccb 200 or 250 amps 4 pole as incomer and mcb sp and tp out going , cupboard wooden knobs in carved design , cusioned seat and back set with ply and latherite tapestry cloth for revolving chair executive trade pattern , favicol sh , glue synthetic or rubber adhesive pidilite sr 505 , paint enamal black apcolite premium satin from aianpaints , paint enamal smoke grey apcolite premium satin from aianpaints , red oxide primer in one ltr packing , stanless steel counsil handle one side for shutters. 100mm in rose gold finish , stainless steel hydraulic hingers 0 deg crank 4 holes for soft closing of cabinet doors , sand paper multignt 60 to 220 , ss304 t beading 10 mm rose gold finish , botton mount soft closing telescope channels for drawers size 10 inch in powder coated finish or zn plating , thinner in one ltr packing , touch wood for polish , turpentine oil , wood adhesive for pvc edge banding fevicol probond edgelock in tubes of 140g , ht heat shrinkable jointing kit outdoor 70 to 120 sqmm , ht heat shrinkable jointing kit indoor 70 to 120 sqmm

CTN :39010405

22 Feb, 2025 NA

Siang - Arunachal Pradesh

Tender For bid to ras supply of spare parts of motor vehicle - rear inner bearing bolero , rear outer bearing bolero , clutch plate tata 1512 , rear hub oil seal bolero , front hub inner bearing bolero , front hub outer bearing bolero , pressure plate with release bearing tata 1512 , front hub oil seal bolero , rear shocker assy tata safari , flasher unit 8 pin 12 volt bolero , brake mcylinder bolero , rear main leaf bolero , centre bolt bolero , u bolt bolero , shackle pin leaf bolero , front brake caliper assy bolero , brake pipe rear l mgypsy , speedometer cable assy mgypsy , fuel pump motor denso mgypsy , fuel return vacuum valve mgypsy , rear seat complete mgypsy soft top , buffer pad lh rh sml truck , fuel filter 1 ltr sml truck , steering bush sml truck , rear bearing part no u 497 tata sumo gold , axle seal tata sumo gold , head light assy ls tata sumo gold , exhaust brake pipe tata 5xton , judgment rod tata 5 xton , steering gear box oil seal tata 1212 tc , front shock absorber lr tata 5xton , jumping rod bush kit force ambulance , engine oil filter new holland tractor , hydraulic oil filter new holland tractor , fuel filter set new holland tractor , cabin rubber buffer pad tata lpta 715 , helmet mcycle , air filter ashok leyland , front differential oil seal mandm scorpio , air filter mandm scorpio , oil filter mandm scorpio , disc pad front mandm scorpio , turbo charger tata sumo , split bulb 24 volts , wheel stud with nut mandm scorpio s10 , steering oil seal scorpio10 , throttle body mgypsy mpfi , throttle body packing , steering oil seal tata 713 lpta , idle speed motor actuator mgypsy mpfi , tps sensor mgypsy mpfi , propeller shaft centre bearing force ambulance , steering gear box oil seal tata 715 lpt , front hub with bearing scorpio s10 , u j cross mgypsy , disc pad front scorpio n , oil seal front tata 110 133 12 , axle oil seal tata 1212tc 4x4 , check nut lock washer front tata 1212 4x4 , check nut lock washer rear tata 1212 4x4 , check nut tata 1212 4x4 , steering gear box oil seal tata 1613 , kit shoe hold down tata sumo , flasher unit 12 volts sml 3500 , emery paper cloth type fine , cold patch solution , bulb 67 no 12 volt , bulb 2441 24 volt , bulb 67 no 24 volt , head light relay 12 volt , flasher unit 24volts tata , pull and push switch , head light bulb 24 volt , u bolt washer , bulb 1141 12 volt , wheel cylinder rear brake scorpio s10 , nut bolt tvs 10 12 14 16 18 20 22 no , grease nipple big , grease nipple small , welding rod 10 swg , welding rod 08 swg , tube less puncher kit , horn 12 volt minda , horn 24 volt minda , m seal , paint red , rim paint , brake adjuster kit scorpio , paint green , ana bond , red oxide primer , white paint , paint black , clamp small , side mirror l r side tata , banjo bolt 19 nos , solution sr 505 , steel screw 1 inch chinese , head light bulb 12 volt , retro reflective tape yellow , retro reflective tape red , retro reflective tape white , silicon tube , flexible pipe rubber 19 no dia , flexible pipe rubber 22 no dia , n c thinner , dash board polish , fuse small 10 15 20 25 , alloy wheel scorpio , oil seal front sml 4x2 , oil seal rear tata sumo , king pin lower tata 1212 4x4 , oil seal front tata 1613 , oil seal rear tata 1613 in out , oil seal rear tata 1212 in out , spring washer 12 17 no , fog light assy , fog light bulb 12v , fog light bulb 24v , t monogram , araldite , split pin various size , banjo washer 12 14 17 nos , shocker assy force ambulance , uj cross scorpio

Central Government/Public Sector

CTN :39101186

21 Feb, 2025 NA

Jagatsinghapur - Odisha

Tender For corrigendum : supply of lp of paints against nac - varnish , distemper white , paint rfu priming red lead , paint rfu interdeck , paint golden yellow , paint epoxy red oxide primer

CTN :39114144

22 Feb, 2025 NA

Haridwar - Uttarakhand

Tender For bid to ras supply of paint red apex , lime , answer sheet as per sample , paint white , paint black , paint green , paint og , paint red , paint brush 2 inch , paint brush 3 inch , paint red oxide primer , paint golden brown , turpentine oil , thinner , snowcem terracotta

Central Government/Public Sector

CTN :39403676

12 Mar, 2025 NA

Jagatsinghapur - Odisha

Tender For supply of paint red oxide primer , interthane 990 signal red , thinner gta 220 , paint rfu interdeck , paint golden yellow , paint black enamel , turpentine oil

CTN :39406588

05 Mar, 2025 17.90 Lacs

South Tripura - Tripura

Tender For post flood maintenance and restoration work in 4 (four) nos. school under amarpur block, gomati district during the year 2024-25/2nd call - dismantling gs sheet roofing including ridges, hips, valleys, gutters wind ties etc. includingdismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per direction of the engineer- in-charge., demolishing cement concrete manually / bymechanical means including disposal of materialwith all lifts and upto 50 m lead etc. complete as per direction of the engineer- in-charge:-, dismantling doors, windows and clerestory windows(steel or wood) shutter including chowkhats,architrave, holdfasts etc. complete and stackingwithin 50 metres lead :, providing and laying in position cement concrete ofspecified grade excluding the cost of centring andshuttering --all work upto plinth level:, providing corrugated g.s. sheet roofing includingvertical/curved surface fixed with polymer coated jor l hooks, bolts and nuts 8 mm diameter withbitumen and g.i. limpet washers or with g.i. limpetwashers filled with white lead and including a coatof approved steel primer and two coats of approvedpaint on overlapping of sheets complete (up to anypitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses andincluding cutting to size and shape wherever requiredetc. complete as per direction of engineer-in-charge., providing ridges or hips of width 60 cm overall widthplain g.s. sheet fixed with polymer coated j or l hooks,bolts and nuts 8 mm dia g.i. limpet and bitumenwashers etc. complete as per direction of engineer-incharge., providing and fixing 1mm thick m.s. sheet door withframe of 40x40x6mm angle iron and 3mm m.s. gussetplates at the junctions and corners, & with cleats withbolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:-, providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framedand fixed in position :, providing and laying cement concrete 1:2:4 (1 cement: 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips and cost of glass strips etc. all complete as per direction of engineerin-charge., finishing walls with water proofing cement paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the engineer in charge., finishing with epoxy paint ( one or more coats ) ofapproved brand and manufacture at all locationsprepared and applied as per manufacturersspecification on old work including preparation ofsurface etc. as required complete as per direction of the engineer in charge:- on steel work.

State Government

CTN :39373897

03 Mar, 2025 9.95 Lacs

Muktasar - Punjab

Tender For special repair of main items at judicial court complex, malout - civil, dismentling glazed tiles (to be carefully removed), scraping cement plaster., 12.5 mm thick cement sand plaster 1:5, removing doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. doors of area 3 sqm and below, deodar wood chowkhats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. single rebate (60mmx100mm), painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade., factory manufactured solid flush door fixed in position hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position cost : is2202-1(1999) commercial with elm or gurjan facing on both/sides with laminated core and lipped edges. 35 mm thick., applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface., finishing wall with exterior decorative cement based on water soluble paint such as snowcem, robbiacem etc. two or more coats to give an even shade., preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete., distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade., precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 (1 cement 3 sand) with neat cement slurry between joints and over the base for floors, treads of steps and landings., finishing walls with textured exterior paint of required shade with two or more coats applied@ 3.28 litre/10 sqm over and including base coat of water proofing cement paint applied@2.20 kg/10 sqm., providing & fixing glass panes with nails and putty or wooden strip complete in all respect. glazing area above 0.09 sqm. 4mm thick or 10.78 kg/ sqm., cost of aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (excluding sliding bolt). for shutter area above 0.50 sqm., credit of doors with chawkhats, public health, providing, installing, testing & commissioning of air conditioners split casting 1.5 tone-5 star invertor technology capacity units including suitable copper pipe, waste pipe, angle frames / stand with outdoor etc. of reputed make such as carrier /voltas complete in all respects., credit of old material, indoor unit 1.50/ 2.00 ton, outdoor unit 1.50/ 2.00 ton

CTN :39387315

25 Feb, 2025 25.82 Crore

Muzaffarpur - Bihar

Tender For rrsmp/24-25 muzaffarpur east-1/02 - t03 - mansurpur to beruadih (odr2), clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., dismantling of existing structures, like culverts, bridge,retaining wall and other structures comprising of brick masonary including unserviceable material and stacking the serviceable material with all lift and lead of 1000m as per technical specification clause 202., dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including t&p and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per technical specification clause 202., construction of subgrade and earthen shoulders :-construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification clause 303.1., excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per technical specification clause 302.3, granular sub-base with well graded material (table 400.1) :- construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401., wbm grading 3 (by mechanical means ) :- providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405., wet mix macadam:- providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., prime coat (low porosity) :- providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., tack coat :- providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., bituminous macadam -providing and laying bituminous macadam with 100-120 tph hot mix plant produci

CTN :39073217

21 Feb, 2025 NA

Panchkula - Haryana

Tender For bid to ras tender for supply of tubing gi 15 mm med grade isi marked , tubing gi 20 mm med grade isi marked , glass sheet clear 1200 mm x 1200 mm x 3 point 8mm , cement in 50 kg pack , glass sheet clear 600 mm x 1200 mm x 3 point 8 mm , pvc pipe 100 mm , helical door spring isi marked , glass sheet frosted 1200 mm x 1200 x 3 point 8 mm , m seal in 90 gms pkt , pvc pipe 75 mm , gi union 15 mm med grade isi marked , elbow gi 15 mm med grade isi marked , thread for plumber , glass sheet frosted 600 mm x 1200 mm x 3 point 8 mm , cp brass extension nipple 15 mm x 150 mm , handle pvc with float valve for pvc low level cistren , gypsum screw black 20 mm , gi clamp for gi pipe , gypsum black screw 25 mm , aluminium hasp and staple of size 100 mm , white cement in 1 kg pack , gypsum black screw 30 mm , gypsum screw black 40 mm , mortice lock isi marked for aluminium door , end plug gi 15 mm , rawal plug 35 x 8 mm , stone aggregate 20 mm well graded , sand confirming to zone 3 , tee equal gi 20 mm suitable for gi pipe isi marked , blade cutter iron , washer for cistern , hammer drill bit 40 oblique 8 , pedestal for wash basin , washer for taps , dr fixit for water proofing 1 kg each , painting brush 100 mm , painting brush 50 mm , welding rod , lime quick , plywood bwr 8 feet x 4 feet x 18 mm , pipe clips 3 oblique 4 inch , floor trap 3 oblique 4 inch , p trap 110 x 110 mm , medium density fibreboard mdf both side laminated teak face 2440 mm x 1220 mm x 19 mm , plywood teak face one side 2440 mm x 1220 mm x 12 mm , french polish , beeding teak wood 20 mm x 6 mm , peg hook brass , plywood teakface one side 2440 mm x 1220 mm x 4 mm , lock for almirah squre type 65 mm , touch wood , form cushion 530 x 550 x 100 mm with cover tepastry cloth , spirit base polish spirit incl lakh dana and sundras , magnetic catcher , sliding channel for furniture steel , handle cp for steel almirah as per sample , knob 40 mm brass , screw 50 mm black , screw 40mm black , nails wire 25 mm , screw 60mm black , nails 40 mm 17 oblique 19 no , fevicol sh 1kg pkt , paint synthetic enamelled white 1st quality pack of 4 ltr , paint synthetic enamelled black 1st quality 4 ltr pack , prelaminated board both side laminated 2440 mm x 1220 mm x 12 mm , paino hinges , ss handle d type 75 mm , mdf post forming pft board of size 900 mm x 450 mm x 18 mm , mdf post forming pft board of size 600 mm x 450 mm x 18 mm , mdf post forming pft board of size 1200 mm x 600 mm x 18 mm , plywood bwp 2400 mm x 1200 mm x 12 mm , round conevx mirror of diameter 80 cm made with flexiable polycarbonate front of 0 point 8 mm thickness reinforeced with plastic back of 3 mm thickness with 6 ft height and 50 mm diameter ms pole medium grade duly painted with two coats of synthetic enamel paint over a coat of red oxide primer , road marking paint water based white , road marking paint water based black , road marking paint water based green , road marking paint water based yellow , abs speed breaker h 50 w 350 l 250 , abs speed breaker h 75 w 500 l 425 , abs speed breaker h 50 w 380 l 500 , automatic star delta starter 60 hp , gi tubing 20 mm medium grade , ppr gate valve 20mm , glass sheet frosted 600 mm x 1200 x 3 point 8 mm , pre laminated particle board 8 feet x 4 feet x 12 mm , gi tubing 15 mm medium grade , gi tubing 25 mm medium grade , gi tee 15 mm , bitumen tarfelt 1 mtr wide x 20 mtr long , hack saw blade double edge , brass nozzle 20 mm for fountain , gi tubing 40 mm medium grade , aluminium inline connector 300 sqmm , gi tee 20 mm , mortice lock isi marked for aluminium door , glass sheet clear 600 mm x 1200 mm x 3 point 8 mm , gi nipple 15 mm dia 150 mm long , gi nipple 20 mm dia 150 mm long , aluminium inline connector 185 sqmm , gi elbow 20 mm , ppr pipe 32 mm , brass nozzle 15 mm for fountain , gi union 20 mm , insualtion tape self adhesive 20 mm x 25 mtr long , cement 43 grade 50 kg bag each , automatic star delta starter 12 point 5 hp , gi socket 20 mm , frame plate 12 modular ,

Central Government/Public Sector

CTN :39171274

26 Feb, 2025 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : provision of pillar upto 1.5 height for demarcation of defence land at hirakund - excavation in post hole (or similar hole) each n exc 0.50 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer n. exc 25 cm etc and getting out soft/ loose soil complete all as specified and directed, m & l for providing precast cement concrete, type b-1 1:2:4 (using 20 mm graded mechanically graded stone aggregates) in win- dow or door cills, lintels, bressumers, steps,quoin blocks (foruse with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin).corbels, brackets,etc. (of any section indicated), with plain fair faces,including chamfers, weatherings,throat- ing etc. and setting in mortar(1:4)complete with joints to match all as specified and directed., m&l for pcc 1:3:6 type d2 using 40 mm graded stone aggregate as in foundation filing and mass concrete., m&l for mild deformed tmt steel bars 10mm dia and over, cut to lenght, bent to shape required, including crandking, bending spirally for hooping fro columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and directed, ditto, above but 5mm and over upto and including 10mm dia in stirrups, spacers and binders, removing excavated material(soils) n exc 50 and desposting where directed at a level n exc 1.5 at a level n exc 1.5m above starting point complete all as specified and directed by eng in charge., s&f for mild steel work as in posts and struts etc in fencing including cutting tops to shapes as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to fe-290 gde e-165 complete all as specified, m & l for writing letter or figured (block, roman, italic or indian) over base coat n exc 30 cm height with synthetic enamel paint complete all as specified and directed., m&l for preparation of newly untreated steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer exc 10 cm width or girth, not otherwise described complete all as specified and directed., mild steel of thickness 0.63mm , plain, blacksheet in wall cladding,steel gates and similarwork, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

Oxide Primer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector