Get complete information related to latest Oxide Primer Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Oxide Primer Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Oxide Primer Tenders.
Tender For supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold,ambuja,ultratech,acc,jk or dalmiya under job no 2502 mmg bkr as per store list,stone boulder 9 inch to 12 inch,coarse aggregate 40-63 mm graded,coarse sand free from vegetation,coarse aggregate 20mm graded,coarse aggregate 40 mm graded,water proofing compound confirming to is 2645-2003 make-pidilite,dr fixit, fevicol,pbs roll 20m long , width of 0.9 mtr isi marked with min weight of 34 kgs oblique roll,cement based paint snowcem make-berger,asian,nerolac,synthetic paint enamelled og confirming to is 5-2004 make-berger,asian,nerolac,synthetic paint enamelled brown confirming to is 5-2004 make-berger,asian,nerolac,anti corrosive red oxide zinc chromate primer confirming to is 5-2004 make-berger,asian,nerolac,loop holes 1000 x 300 mm make-tata,sail,jsw,ventilator steel 300 x450 mm wiil be fabricated using isa 35x35x5mm for outer frame and isa 30x30x3mm for shutter frame with blace sheet make-tata, sail,jsw as per stor
Tender For supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold,ambuja,ultratech,acc,jk,dalmiya under job no 2506 svl pd with ohp as per store list,stone boulder 9 inch to 12 inch,coarse aggregate 40 to 63mm,coarse sand free from vegetation,coarse aggregate 20mm graded,coarse aggregate 40mm graded,mild steel bar of size 6 to 8 mm dia conforming to is 432 part i 1982 make-tata,sail,jsw,water proofing compund conforming to is 2645-2003 make-pidilite,dr fixit,fevicol,pbs roll 20m long , width of 0.9mtr isi marked with min weight of 34 kgs oblique roll,gi binding wire tata,sail,jsw,cement based paint snowcem make-berger,asian,nerolac,slack lime,painting brush 4 inch isi marked,hdpe sand bags khaki colour of size 30 inch x 15 inch inside laminated interlocking stiched, weight of the each bag should not be less then 42-45 gms oblique bag,anti corrosive red oxide zinc chromate primer conforming to is-5-2004 make-asian,berger,neroloc,synthetic paint enamelled og conforming to is 5-2004
Tender For supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold,ambuja,ultratech, acc,jk or dalmia under job no 2504 ags pd as per store list att,stone boulder 9 inch to 12 inch,coarse aggregate 40 to 63mm,coarse sand free from vegetation,coarse aggregate 20mm graded,coarse aggregate 40mm graded,mild steel bar of size 6 to 8 mm dia conforming to is 432 part i 1982 make- tata,sail,jsw,water proofing compund conforming to is 2645-2003 make-pidilite,dr fixit,fevicol,quick setting compound make-pidiite,quick fix,fevicol,pbs roll 20m long , width of 0.9mtr isi marked with min weight of 34 kgs oblique roll,gi binding wire tata,sail,jsw,cement based paint snowcem make-berger,asian,nerolac,slack lime,painting brush 4 inch isi marked,hdpe sand bags khaki colour of size 30inch x 15inch inside laminated interlocking stiched, weight of the each bag should not be less then 42-45 gms oblique bag,anti corrosive red oxide zinc chromate primer conforming to is-5-2004 make-asian,berger,neroloc,s
Tender For process piping, structural steel and equipment erection work of ventilation system for oesc building at taps-3 and 4 site. - structural steel work using angles, channels, joists and other sections at all levels including supply, cutting, fabricating, welding, hoisting, erecting & fixing in position, complete all as per specifications, drawings and as directed by the engineer in charge., welding of cs-cs pipe, pipe fittings and components, including fit up, root with gtaw/smaw with or without purging and completion of weld joints by gtaw/ smaw (bw/nw), welding of cs-cs pipe, pipe fittings and components, including fit up, root with gtaw/smaw with or without purging and completion of weld joints by gtaw/ smaw (sw/fw), welding of ss to ss, cs to ss, ss to alloy steel pipe, pipe fittings and components, including fit up with or without consumable insert, root with gtaw/smaw/open root with or without purging and completion of weld joints by gtaw/ smaw (bw/nw), welding of ss to ss, cs to ss, ss to alloy steel pipe, pipe fittings and components, including fit up, root with gtaw/smaw/open root with or without purging and completion of weld joints by gtaw/ smaw (sw/fw), erection of pipes and pipe fittings components on permanent hangers including cleaning, cutting in required size, handling from engineers store as per specifications, drawings and as directed by the engineer in charge., supply, fabrication, erection of grill mounting cs collar from cs plate of 3 mm thickness and welding it to cs duct by gtaw/ smaw (sw/fw), execution of liquid penetrant testing of all joints such that root nad final dpt of bw/nw joints and final dpt of sw/fw joints including supply of consumables required for performing liquid penetrant test as per npcil approved brand list (the witness authority will be npcil qa during execution), supply galvanised full threaded rod of 22 mm dia with its nut assembly and coupler that is to be used for providing hanger type support for ducts and pipes., supply of fasteners, nuts and washers of 8.8 grade in different sizes and u-bolt with nut assembly for pipeline of different sizes from 15 nb to 550 nb as per requirement/drawing., installation of hsl anchor fastners up to m-16 size supplied by npcil including drilling of holes,tightening of fasteners and deployment of required tools, machinery and consumables as per specifications, drawings and as directed by the engineer in charge., shifting and installation of various equipments and components like combined hepa charcoal filter, hepa filter, centrifugal fans as per drawing, shifting and installation of grilles of different sizes in the duct collar as per drawing, shifting and installation of oxygen cylinder in designated area as per drawing, shifting & erection of ultrasomic decontamination chamber with filteration equipments related piping & structure as per section-v, shifting & erection of laundry equipments inside oesc building as per section-v, shifting & erection of liquid effluent transfer pump inside oesc building, as per section-v, shifting & erection of 01 t manual hoist inside oesc building, as per section-v, providing one coat of zinc phosphate epoxy primer and applying two finish coats of polyurethene paint with a dft of minimum 50 microns of approved make and shade including surface preparation by application of wire brush, emery cloths, power tools wherever required to remove dirt, rust and all loose material at various elevations/ all heights includes protecting and cleaning the areas, applicable total gst rate (%) included in the quoted price:, cgst rate(%), sgst rate(%), igst rate(%)
Tender For bid to ras bid to ras tender for supply of rectangular structural steel tube 60 x 40 x 4 mm thick is_8500_1991 gde fe 540 , dia 70 mm round alloy steel is_11185_1984_gde 40 cr4mo3 , alloy steel flat 30 mm width x 6 mm thick is_5517_93 gde _ 25 cr13 , dia 55 mm round bar alloy steel is_11185_1984_gde 40 cr4mo3 , m s welding rod 3_15 mm x 350 mm long , m 5 x 1 10 mm long round screws , paint enamel og , thinner , paint red oxide , grease nipple m 10 x 1 , cold rolled steel sheet 1mm thick is_513_2008_ gde cr3 mm 900mm x 1200mm _one sheet_ , snap head rivet 6mm dia x 12mm long is_2155_1962 , hexagon socket grub screw m8 x 12mm long_ type _e_ is_6094 _ 1971 , a finished _coupling body_ to be procured through l_c_ as per sample and drawing_ drawing no _ a3_515_smp_57263 , aluminium tube 8mm od x 1mm thick is_738_77 gde _52000 _o_ condition 14_68 kgs , steel round bar 14mm dia is_2004_1991 gde _45 c8 class_4 , aluminium round bar 14mm dia is_733_1983_gde 54300 condition _m_ mtrs 2 , steel hex bar a_f 19mm is_2004_1991 gde _45c8 class _4 , paint primer is_1874_68_ jss_3_47_13 , paint enamal yellow is_2932_ jss_8010_1 , tig welding rod 2mm dia x 1000mm long , aluminium alloy tube 8 mm dia x 1mm thk unit length 1500 mm is_738 gde 19500 , steel round bar 14mm dia is_9550 gde 45c8 mtrs 6_60 , steel hexagon bar 19mm a_f is_ 9550 gde 45c8 8_10 , aluminium primer zinc chromate , plastic cover clear 80 microns x 50 mm width , paint enamal yellow
Tender For pivot pin mounting bracket for electric arc furnaces to rwf drawing no.71120 0112690. scope of work for manufacturing and supply of pivot pin mounting bracket: (a) sub mission of raw material procurement invoice from reputed source. (b) selection of electro des of e-7018 quality of m/s.advani oerlicon/ l&t/ esab/ meta fusion/ weld craft/ ador only. ( c) marking, sizing and surface preparation. (d) preparations of weld joints. (e) machining of block, plates, drilling of holes, formation of plates. (f) welding by qualified welders. (g) st ress reliving time temperature graph shall be enclosed. (h) weld joints should be dp tested for liquid penetration test(pt) randomly for 20% - test certificate shall be enclosed. (i) san d blasting and painting of pivot pin mounting bracket by one coat of red oxideprimer. (j) dis patch of pivot pin mounting bracket with suitable packing to avoid damage during transit. [ warranty period: 18 months after the date of delivery ]
Tender For supply of epoxy based zinc phosphate primer (two pack) epoxy based zinc phosphate primer (two pack) as per is 13238 (q3) , zinc priming paint, epoxy based, two pack as per is 14589 (q3)