Get complete information related to latest Paper Item Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Paper Item Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Paper Item Tenders.
Tender For corrigendum : repair, recanning and restoration of all wooden and steel chairs at md accn and units of bmu, dhq-5 and icgas chennai area under ge (i) (cg) chennai - chair verandah:-, fd-256 ,259,fd/map-ii/06, spot gas welding to broken parts/joints of chairs., removing of existing torn out/unserviceable plastic cane from chair verandah and recanning the chair fully both seat and back with new plastic cane of virgin quality white, half round of size 4mm wide and 0.60 mm thick.complete all as specified and shown on drawing.the canning shall only be done after painting the chair. , removing the old broken shoes of chairs and supply and fixing best quality new pvc shoes to the legs of chair., removing the existing unserviceable/broken pvc seat and back from the chair,supply and fixing new pvc seat and back 4mm thick to the chair verandah map after providing one flat iron of size 20mmx5mm in support of pvc seat at centre between two sides through proper welding .the pvc seat shall got approved from ge before supply.the pvc seat shall be fied only after painting the chair., painting the frame of the chairs by two coats of synthetic enamel white of approved quality paint after prepartion of steel surface by sanding with sand emery paper and dusting the surface with clean cloth.the chair frame shall be made smooth by applying metal putty whereever required., chair cb steel with arms:fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces by removing the old paint with sand emery paper. complete all as specified and as directed by engr-in-charge, remvoing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable arm and supply and fixing new arm of 1st class teak wood as per drg., removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair cb steel without arms: fd-75(m), scratching the entire frame of chair and applying one coat of synthetic enamel paint after preparation of surfaces. complete all as specified and as directed by engr-in-charge, removing the old unserviceable and broken ms flat and supply and fixing ms flat of size 25mmx4mm welded beneath in between the width of the chair for support of seat., removing the old unserviceable seat from the frame of the chair. supply and fixing new seat made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable back from the frame of the chair. supply and fixing new back made of teak wood duly polished in natural shade including cane work in godrej pattern, fitting in position with 04 nos of nut bolts and washers of length 60-65mm, removing the old unserviceable hard rubber shoes and supply and fixing new hard rubber shoes as per drg., removing the old unserviceable rubber caps and supply and fixing new rubber caps as per drg., chair easy,fd-229,358 :-, removing the old unserviceable rear leg and supply and fixing new rear leg of 1st class teak wood as per drg., removing the old unserviceable front leg and supply and fixing new front leg of 1st class teak wood as per drg., removing the old unserviceable rail and
Tender For supply of stapler pin , kangaro heavy duty stapler , kangaro stapler , kangaro stapler remover , pvc sheet for binding , spiral binding ring premium quality , comb binding ring metal , photo paper matt inkjet coated , white card , paper cutter heavy duty , paper cutter blade , wire cutter taparia , binding tape black and blue , stretch film roll biodegradable , a1 cutting mat , corner cutter machine heavy duty , plastic packing roll tube , heat gun , lamination roll , golden foiling roll
Tender For supply of materials of construction of sanjivini shed, bhandigadi gp, koppa taluk, chikkamagaluru district - broken stone aggregate 40 mm size(bha), broken stone aggregate 20 mm size(bha), broken stone aggregate 12 mm to 10 mm size(bha), coarse sand (zone iii)(bha), portland cement(bha), mixer (concrete) - 1 cum capacity(bha), add watering charges at 1 % on material(bha), add sundries charges at 1 % on material(bha), transportation/loading and unloading of material/lifting of material /wastage/unforeseen charges/miscellaneous which are necessary during execution.(bha), plasticizer / super plasticizer(bha), hom of vibrator 0.71 days(bha), formwork, centering & scaffolding for beams & lintels of building - 20%(bha), water(bha), mason class i (with tools)(bha), mixer (concrete small used in culvert)(bha), generator 33 kva(bha), water tanker(bha), tmt bars fe 500(bha), binding wire(bha), size stone 20 x 20 x 25 cms(bha), bond stone 20 x 20 x 45 cm(bha), boulders(bha), mason class ii (with tools)(bha), stone chistler class ii(bha), add sundries charges at 1 % on labour(bha), add watering charges at 1 % on labour(bha), silver oak or equivalent planks 38 mm thick(bha), casurina poles 100 - 150 mm(bha), casurina poles 75 - 100 mm dia(bha), add handling , loading and unloading at 2% on material(bha), add sundries charges at 2 % on material(bha), jungle wood runners and planks(bha), brick(bha), add handling , loading and unloading at 1% on material(bha), add providing and removing scaffolding at 3% on labour(bha), vitrified tiles 600x600 mm(bha), mathi/nandi wood planks for panels 25 mm thick(bha), add cutting and other wastage 5%(bha), hom of machinaries for planing(bha), honne wood(bha), honnewood planks for panels 20 mm thick(bha), m.s rods(bha), ms flat(bha), fitter class i(bha), welder grade i(bha), add hom of welding and grinding machine at 4% on material(bha), ready mix primer paint (ready mix red lead paint)(bha), add wire brush, fine steel wool, putty, sand paper, at 3% on cost of paint(bha), painter class i(bha), enamel metal paint(bha), add brush at 1% on cost of paint(bha), aluminium window frame section 1.20 mm thick(bha), nylon rollers(bha), rubber beading for shutters beading(bha), pvc edge beading(bha), alluminium tower bolt - 20 cm(bha), alluminium handles - 15 mm(bha), cleat angles(bha), chrominum plated screws(bha), thick plain glass 5.50 mm (bha), fabricator(bha), add hom of welding and grinding machine at 2% on material(bha), ceramic tiles 30 x 30 cms(bha), white cement(bha), dry distemper(bha), whitening(bha), add brush, putty, glue at 5% on cost of paint(bha), enamel paint(bha), add brush, putty, sand paper, roller at 5% on cost of paint(bha), formwork, centering & scaffolding for plastering & painting of ceiling - 25%(bha), white vitreous china clay flat back wash basin size 550x400mm(bha), copper plated brass piller tap 15mm(bha), cp brass chain with plug(bha), cp brass waste 32 mm of standard pattern(bha), brass stop cock(bha), c.i. / m.s. brackets for flushing cistern(bha), lead or pvc connection pipe 32mm dia (for wash basin)(bha), licenced plumber with tools(bha), add white lead paint, gasket, cement, sand for making good the wall and floor at 2% on material(bha), stone aggregate(single size) 20 mm nominal size(bha), stone aggregate(single size) 10 mm nominal size(bha), pvc pipe of 4kg/cum,75 mm(bha), unit cost as per the specification(bha), ms pipes of 80 mm to 100 mm dia(bha), rms gusset plate(bha), corbon electrodes(bha), hom of welding and grinding machine(bha), add(bha), mechanic class ii/mechanic hmp grade i/eme grade(bha), hom of cutting and grinding machine(bha), tools and plants at2% on material(bha), stainless steel hollow pipes 16 gauge 50 mm dia(bha), stainless steel hollow pipe 25 mm dia(bha), thick m.s plate 5inches dia 5mm (bha), gi coated expansion bolts(bha), weilding rods(bha)
Tender For procurement of material for the construction of shg shed in thalihalla gp of chikkamagaluru taluk - boulders shg010, bond stone 20 x 20 x 45 cm shg010, size stone 20 x 20 x 25 cms shg010, binding wire shg010, tmt bars fe 500 shg010, hom of vibrator 0.71 days shg010, plasticizer or super plasticizer shg010, transportaion charge shg010, add sundries charges at 1 percent on material shg010, watering charges at 1 percent on material shg010, mixer (concrete) - 1 cum capacity shg010, portland cement shg010, coarse sand (zone iii) shg010, broken stone aggregate 12 mm to 10 mm size shg010, broken stone aggregate 20 mm size shg010, broken stone aggregate 40 mm size shg010, painter class i shg010, ready mix primer paint (ready mix red lead paint) shg010, add hom of welding and grinding machine 4 percent on material shg010, welder grade i shg010, fitter class i shg010, ms flat shg010, m.s rods shg010, honnewood planks for panels 20 mm thick shg010, honne wood shg010, hom of machinaries for planing shg010, cutting and other wastage 5 percent shg010, mathi/nandi wood planks for panels 25 mm thick shg010, vitrified tiles 600x600 mm shg010, add providing and removing scaffolding at 3percent on labour shg010, add handling , loading and unloading at 1percent on material shg010, brick shg010, jungle wood runners and planks shg010, casurina poles 75 - 100 mm dia shg010, add sundries charges at 2 percent on materialshg010, handling , loading and unloading at 2 percent on material shg010, silver oak or equivalent planks 38 mm thick shg010, stone chistler class ii shg010, mason class ii (with tools)shg010, mason class i (with tools) shg010, mixer (concrete small used in culvert) shg010, electrification shg010, name board shg010, polyenthylene water storage tank of specified capacity l shg010, add brush, putty, sand paper, roller at 5 percent on cost of paint shg010, enamel paint shg010, add brush, putty, glue at 5 percent on cost of paint shg010, whiteningshg010, dry distemper shg010, fabricatorshg010, chrominum plated screws shg010, cleat angles shg010, alluminium handles - 15 mm shg010, alluminium tower bolt - 20 cm shg010, pvc edge beading shg010, rubber beading for shutters beading shg010, nylon rollers shg010, aluminium window frame section 1.20 mm thick shg010, enamel metal paint shg010, stone aggregate(single size of 10 mm nominal size shg010, stone aggregate(single size of 20 mm nominal size shg010, add hom of welding and grinding machine at 2 percent on material shg010, glass of 5.50 mm thick plain shg010, casurina pole
Tender For corrigendum : supply of 1020611515acrypole sheet 15 mm thick 0 1 mm colour code 430 the sheet should be free from scrach and pasted with paper both sides , 1020120107celluloid opaque white sheet 1 point 6 mm thick , 1020610866rigid pvc sheet 1mm thick transparent colour less type 1 to is 6307 1985 size 3ft x 3ft x 1mm thick note with packing to avoid scratches during transport , 1567320022ebonite rod 7 by 8 inch 22 point 23 mm type i of is 6693 1972 , 1567111012perspex rod 12 mm dia clear transparent acrylic colourless