Tender For corrigendum : supply of instruments for vats (video assisted thoracic surgery) - trocar,size11mm, autoclavable consisting of: trocar, with blunt tip, trocar cannula, flexible, without valve, length 8.5 cm, trocar, size6mm, autoclavable consisting of: trocar, with blunt tip, trocar cannula, flexible, without valve, length 8.5 cm, trocar, size11mm consisting of:trocar with blunt tip, length6cm, size11mm, trocar, size11mm consisting of:trocar with blunt tip, length6cm, size13mm, trocar, size11mm consisting of:trocar with blunt tip, length6cm, size6mm, trocar with blunt tip, with 45 luer-lock connection for insufflations, 11mm, working length 8.5cm, parenchymal forceps, atraumatic, straight jaws, single action jaws, size 5mm, length 28 cm, consisting of: mouret metal handle with haemostat style ratchet, axial with 4 locking positions for outer tube with working insert, lung forceps, dismantling, atraumatic, curved jaws, fenestrated single-action jaws in 5mm 28 cm, consisting of: mouret metal handle with haemostat style ratchet, axial with 4 locking positions for outer tube with working insert, parenchymal forceps, atraumatic, double curved jaws, size5mm, length28cm, consisting of: metal handle without ratchet with 4 locking positions, outer tube with working insert, lung forceps, atraumatic, fenestrated, single curved jaws ,size5mm, length28cm, consisting of: metal handle without ratchet with 4 locking positions, outer tube with working insert, lung nodule forceps, atraumatic, fenestrated, curved jaws, single action jaws, size 5 mm, length28cm, consisting of: metal handle without ratchet with 4 locking positions, outer tube with working insert, grasping forceps, cobra-jaws, 1x2teeth, straight jaws, single action jaws, size5mm, length 28cm, consisting of: metal handle with 4 locking positions outer tube with working insert, clickline parenchymal forceps, atraumatic, dismantling, without connector pin for unipolar coagulation, single action jaws, single curved jaws, size 5 mm, length 28 cm, consisting of: metal handle along with outer sheath with forceps insert, for use with linear staplers., grasping forceps, rotating, with connectorpinforunipolarcoagulation,size5mm,length30 cm, atraumatic, fenestrated, curved, single action jaws, consisting of plastic handle, without ratchet, with larger contact area, outer tube insulated & insert, kelly dissecting and grasping forceps dismantling, curved jaws, double action jaws, size 5mm, length 28 cm, consisting of: metal y-handle, with absorber1 geometry, axial, with 4 locking positions, outer tube with forceps insert, scissors insulated, straight jaws, curved scissor-blades, double action jaws, size5mm ,length 28cm, with connector pin for unipolar coagulation, consisting of: insulated metal handle with 4 locking positions, insulated outer tube with working insert, scissors, insulated, distally angled outer sheath, curved scissor-blades, scissor blades open horizontally to angulation, double action jaws, size5mm, length28cm, with connector pin for unipolar coagulation, consisting of: insulated metal handle with 4 locking positions, insulated outer tube with working insert, scissors, insulated, distally angled outer sheath, straight scissor-blades, scissor blades open parallelly to angulation, single action jaws, size 5 mm, length 28 cm, with connector pin for unipolar coagulation, consisting of: insulated metal y-handle with 4 locking positions, insulated outer tube with working insert, biopsy forceps, insulated, distally angled outer sheath, single action jaws, size 5 mm, length 28 cm, with connector pin for unipolar coagulation, consisting of: insulated metal y-handle with 4 locking positions, insulated outer tube with working insert, suction-coagulation cannula, with connector pin for unipolar coagulation with handle,size5 mm, length 28-30 cm in both distally angled sheath and straight sheath option, coagulating and dissecting electrode, l-shaped, insulated, with connector pin for unipo
Tender For rate contract for 02 years( extendable) for purchase of various types of consumables for department of aneaesthesiology, pgims, rohtak- heat & moisture exchange filters (hmef): hepa bacterial and viral fi with hme properties offering optimum hydrophobic filtration performance. gas sampl port, for end tidal co2 monitoring. recommended tidal volume range 150-1200ml.ev pleated filter medium to allow maximum filtration efficiency with minimal resistance flow. low dead space, not more than 45-55 ml. single use, sterile ece/usfda/iso/ , heat&moisture exchangers (hme) filter for pediatric us , recommended tidal volume <600ml.low weight. low dead space. suitable for b ventilated and spontaneously breathing patients. low resistance to flow. corrugated pa medium with high efficiency to recover about 75% of the energy and moisture. single sterile. ece/usfda/iso , heat & moisture exchangers (hme) for spontaneous breathing in tracheostomized patients. suction port to allows access to suct , catheter. clear housing to allow visualization of contamination. integrated oxygen port allow delivery of supplemental oxygen. recommended tidal volume range from 1000ml.compact and lightweight. corrugated paper medium device can be used fo maximum period of 24 hours. single use sterile. minimum resistance anti occlus mechanism. ece/usfda/iso , epidural set. a set containing tuohy's epidural needle minimum length 80m 16g, 17g and 18g, and corresponding gauge epidural catheter with closed tip and th lateral eye, length 90-100 cm and flat filters 0.2 micrometer hydrophilic two way, fill area approx 4.91 cm², priming volume 0.75 ml all connections should be of luer lock ty lor(loss of resistance) syringe, presterilized. ece marked/usfda approved , combined spinal epidural set. containing 18 g touhy epidural needle minimum 80 mm length. pencil point, spinal needle with twist lock system, marking tuohy's needle hub and depth marking on tuohy's needle hub containing correspond clear catheter with connection, closed end and 3 lateral eye of approx. length 90-100 with epidural filter 0.2 micrometer hydrophilic two way, epidural sponge and lor (loss resistance) syringe. ece marked/usfda approved - , needle for spinal anaesthesia, quincke type, same colour coding the hub and stylet, presterilized. usfda and europen ce approved- , (a) 23 g, 90mm length od approx 0.64 mm, , (b) 24g,90mm length od approx 0.5mm with/without introducer , (c) 25g, 90 mm , (d) 26g, 90 mm , (e) 27g, 90mm , paed. spinal needle without introducer, colour coded length 50mm, g, od 0.5 mm, presterilized. usfda and europen ce approved , cuff manometer: allows controlled initial cuff inflation. intermittent press monitoring facility. instant visual confirmation of intra-cuff pressure. simple operation pressure adjustment without need for disconnection or introduction of syringe into syst solid green zone indicates usual cuff pressure range for tracheal & tracheosto tubes.connecting tube is supplied with the gauge for convenient positioning. portable ga and clips easily into pocket. , face mask- clear, reusable, pvc material, transparent for good visibil adjustable cushion for better comfort. , sizes:- , a) 0, , b) 1, , c) 2, , d) 3,0) 4,1) 5- , anatomical facemask made up of antistatic inflating pad, malleable, anatom. chaned to give precise seal and fit comfortably, sizes 1.2.3.4 , disposable lma with preformed curve 90 degree like ilma with airwa tube with standard connectors for anaesthesia circuit. us fda approved. sizes 1, 1.5,2, 2.5,3,4,5 , resuable pressure infusion bag for administration of fluid to patient unde pressure, compatible with 500 ml fluid bags, flexible, stury, pvc tubing and manometer stop cock and hand pump, latex free , clear pressure- monitoring lines, which can withstand pressure up to 500 psi with minimal damping, non kinkable, pre-sterilized, disposable, id/ed1/2 mm. length 100 cm, 150cm & 200 cm. low dead space but pe may be optional. , 17ofessor
Tender For purchase of equipments for dmt department lab - purchase of equipments for dmt department lab, fanuc cnc simulation trainer kit system type: standalone cnc simulation trainer with integrated hardware panel functionality: switchable milling (3-axis) and turning (2-axis) simulation cnc control: original fanuc control system or officially licensed equivalent software: manual guide i (licensed version) for conversational programming and 3d simulation programming: supports g code (iso standard) and conversational programming storage: minimum 512 kb program storage with at least 400 programs tool offsets: minimum 32 pairs coordinate system: g52 g59 with minimum 48 additional work offsets (milling) display: minimum 10 color lcd input: full qwerty keyboard connectivity: usb, ethernet interfaces: rs232 / i/o link power supply: 100 240 v ac, 50 60 hz power consumption: 100 w construction: industrial grade trainer unit , robotic arm controllerdegrees of freedom: 6 dof payload: minimum 250 g at full reach reach: minimum 350 mm repeatability: 0.2 mm or better controller: industrial-grade controller (arm cortex-m4 or higher / equivalent architecture) programming: supports gui based and programming (python / c++ / equivalent) vision system: integrated camera with ai-based object detection capability communication: usb and serial communication software: licensed software compatible with windows os end effectors: minimum 3 (gripper, suction cup, pen holder) safety: emergency stop, limit protection power supply: 100 240 v ac, 50 60 hz, optical digital microscopemagnification: 40x to 400x digital camera: minimum 5 mp resolution display: pc/monitor via usb/hdmi or built-in display illumination: adjustable led illumination focus: coarse and fine focusing mechanism optics: coated lenses with wide field view stage: mechanical stage with slide holder software: image capture, measurement, and analysis software included connectivity: usb / hdmi /ethernet power supply: 110 240 v ac, 50 hz, portable surface roughness tester parameters: ra, rz, rq, rt measuring range: ra: 0.005 16 m rz: 0.02 200 m resolution: 0.01 m accuracy: 5% or better stylus: diamond tip ( 5 m radius) cut-off lengths: 0.25 mm, 0.8 mm, 2.5 mm display: digital lcd output: usb interface for pc connection standards: iso 4287 / din / ansi compliant power: rechargeable battery
Tender For supply of dmt lab items dept use - robotic arm controller with software supportdegrees of freedom: 6 dof payload: minimum 250 g at full reach reach: minimum 350 mm repeatability: 0.2 mm or better controller: industrial-grade controller (arm cortex-m4 or higher / equivalent architecture) programming: supports guibased and programming (python / c++ / equivalent) vision system: integrated camera with ai-based object detection capability communication: usb and serial communicationsoftware: licensed software compatible with windows os end effectors: minimum 3 (gripper, suction cup, pen holder) safety: emergency stop, limit protection power supply: 100 240 v ac, 50 60 hz, optical digital microscopemagnification: 40x to 400x digital camera: minimum 5 mp resolution display: pc/monitor via usb/hdmi or built-in display illumination: adjustable led illumination focus: coarse and fine focusing mechanism optics: coated lenses with wide field view stage: mechanical stage with slide holder software: image capture, measurement, and analysis software included connectivity: usb / hdmi /ethernetpower supply: 110 240 v ac, 50 hz, digital height gage with driving wheel (300)measuring range: 0 300 mm resolution: 0.01 mm accuracy: 0.03 mm construction: hardened stainless steel column base: ground and lapped base suitable for surface plate measuring tip: carbide tipped scriber movement: smooth slider with fine adjustment wheel display: digital lcd power: battery operated, portable surface roughness testerparameters: ra, rz, rq, rt measuring range: ra: 0.005 16 m rz: 0.02 200 m resolution: 0.01 m accuracy: 5% or better stylus: diamond tip ( 5 m radius) cut-off lengths: 0.25 mm, 0.8 mm, 2.5 mm display: digital lcd output: usb interface for pc connection standards: iso 4287 / din / ansi compliant power: rechargeable battery, ultrasonic flaw detectortest range: 2.5 mm to 10 meter in steel velocity range: 1000 15000 m/s gain: minimum 100 db with calibrated steps frequency range: 0.5 15 mhz display: a-scan display (lcd) modes: pulse echo and transmit/receive linearity: vertical: 3% horizontal: 0.5% probes: minimum 2 (straight and angle) connectors: standard (size 00 or equivalent) power: rechargeable battery + ac supply