Latest pcc pole Tenders | Government pcc pole Tenders

State Government

CTN :38329031

23 Dec, 2024 9.58 Lacs

Ambala - Haryana

Tender For corrigendum : construction of transmission line - pcc poles supply and erection of pre-stressed cement concrete pole of suitable length with a given planting depth confirming to is-1678_1960_1978 below ground level in excavated pit of suitable dimensions complete in all respect as approved by engineer_in_charge at site pcc pole overall length 11 metre , planting depth 1.80 metre , w_l 400 kg pb csr 2020 item no 34.32(iii) , insulators supply and erection of insulators confirming to is_2544 and 5350 (test certificates of cpri) includes supply and erection of nuts bolts and other accessories whatsoever required at site for fixing it to the structure pole. the job is to be completed as approved by engineer_in_charge 11kv pin insulator with gi pin pb csr 2020 item no 34.35(i)(b) , stay sets supply and erection of stay set consisiting of 19_20mm dia.of suitable length gi stay rod duly threaded upto 300mm at one end and shaped on the other end ms plate size 30cm x 30cm x 6mm with 20mm dia hole drilled in the centre of the plate gi stay wire size 7_10 swg , gi thimble for stay binding , egg_strain insulator , ms elbow made out of 16mm plain sheet and a 20cm long piece of 50mm x 50mm x 6mm angle iron made to the shape as approved by engineer_in_charge. stay set complete shall be fixed to the pole by providing suitable size full clamps made out 50mm x 6mm size ms flat with required number of nut and bolts 16mm dia on one end and shall be embedded on the other end. the stay plate shall be covered with cement concrete having total volume of the concrete not less that 0.042cum. the job shall include excavation of pit and back filling and after pouring concrete with excavated soil etc. as approved_desired by the the engineer-incharge stay set consisiting of 19_20mm dia 2.4 metre long gi stay rod pb csr 2020 item no 34.35(ii)(b) , acsr conductor wolf 150mm2 , pole top brackets (galvanised) , v-shape cross arm 100x50mm , half clamp ms flat 50x5 , 11 kv polymeric disc insulators 70kn , danger plate , phase plate (set of 3) , barbed wire , earthing arrangement of 11kv poles , eye screw bolts 9inchx5_8 inch(galvanised) weight 0.483 kg. , nut and bolt ms off size , ms channel 100 x 50 x 6 - 2400 mm (galvanised) for h-pole , belting for h-pole 50 x 50 x 6mm . (galvanised) weight 9.90 kg , bracing for 4-pole 50 x 50 x 6mm . (galvanised) weight 14.49 kg , single tension fitting complete suitable for acsr wolf , pg clamp , full clamp ms flat 50x5 , ms angle 65x65x6 , erection charges

State Government

CTN :38334676

19 Dec, 2024 1.41 Lacs

Purulia - West Bengal

Tender For corrigendum : painting of 33kv and 11kv structure with pcc pole, rail pole, ct, pt and grid cable structure at arsha sub station under purulia division

Central Government/Public Sector

CTN :38598434

06 Jan, 2025 44.60 Lacs

Srinagar - Jammu And Kashmir

Tender For ca no. ge (af)/sgr-60/2024-25 provn of high mast light at 45 weu mt section, pcc foundation for two, four and six pole structure and three phase power supply, geysers, 02 nos ac, ceiling fans and exhaust fans at certain locations under ge (af) srin

CTN :38521123

21 Dec, 2024 5.00 Lacs

Mathura - Uttar Pradesh

Tender For corrigendum : supply of various material for anurakshan mah october-november 2024 under edc-i, mathura - aluminium binding wire (5 & 6 mm dia), lt clamp with nuts & bolts of pcc pole with neutral, lt shackle insulator, bolts & nuts for shackel, neutral cum earth wire gi wire 7.16 mm or 6 swg, aluminium jointing sleave for aaac conductor weasel/rabbit, aluminium jointing sleave for acsr conductor weasel/rabbit, spacer lt pvc, alluminium lug bolted type, alluminium crimping lug 400 sqmm, alluminium crimping lug 240 sqmm, alluminium crimping lug 150 sqmm, alluminium crimping lug 120 sqmm, al. pg clamps weasel to weasel, al. pg clamps dog to dog, suspension clamp for ab cable (various size), tinned copper fuse wire (various size), silica gel

CTN :38497470

21 Dec, 2024 NA

Kasganj - Uttar Pradesh

Tender For corrigendum : the work of supply & erection/installation of tail less unit, d.o. fuse set, boots and sleeves & diffrent types of material use in dtr protection (bp 2024-25 phase-ii) edd i & edd (rural) kasganj under the juridiction of edc, kasganj on semi turn-key basis. - supply of material by the contractor, do fuse set, m.s. top channel (125x65x2240 mm.), holding clamps for ms top channel, tail less unit 500a/650v with fitting suitable for pcc/stp pole., nut, bolt & washer, m.s. angel with clamp and nut & bolt, m.s. earthing with earth rod as per respo norms, boots & sleeves, al lugs 120 sq.mm, distribution panel box no.2 circuit with stud type tail less unit 500 amp, 650 v with brass holding studs, copper contacts, height of tail less unit 48 inch width 3 inch and pannel size h-1650+300 mm, w-750 mm, d-520 mm & thickness of crca sheet gauge 14x16 along with alu busbar of size 50x6 mm for phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm ms angle with earthing arrangement., distribution panel box no.3 circuit with stud type tail less unit 500 amp, 650 v with brass holding studs, copper contacts, height of tail less unit 48 inch width 3 inch and pannel size h-1650+300 mm, w-1400 mm, d-520 mm & thickness of crca sheet gauge 14x16 along with alu busbar of size 50x6 mm for phases & neutral with color code heat shrink sleeve and mounting stand of 40x40x5 mm ms angle with earthing arrangement., safe carriage of following/ any other material from electricity store center soron/etah/aligarh to pit site of work from the kaccha & pakka road including loading & unloading at the respective ends including the cost of arrangement of labour, t&p etc. which required for topper completion of work., lt xlpe cable al. 1x120 sq.mm., acsr weasel conductor for jumpering, erection of material, erecetion/installation of d.o. fuse set, fixing of m.s. top channel (125x65x2240 mm.) with all accessories., foundation of distribution panel box no.2 circuitwith fixing arrangement & replacement of cable with lugs., foundation of distribution panel box no.3 circuitwith fixing arrangement & replacement of cable with lugs., fixing of tail less unit 500a/650v with fitting suitable arrangement like bus bar etc. for pcc/stp pole., erection of m.s. earthing with earth rod as per respo norms.

CTN :38542573

23 Dec, 2024 NA

Aligarh - Uttar Pradesh

Tender For corrigendum : supply of pcc pole 8.5 mtr. long,stp pole 11 mtr. long,stone pad ,11 kv v type cross arm,11 kv cross arm clamp with n&b,11 kv pin insulator,11 kv g.i. pin with n&b,f-bracket,earthing of pole,acsr rabbit conductor,acsr weasel conductor,11 kv xlpe cable 3x185 sq.mm.,11 kv cable jointing kit o/d for 3x185 sq.mm. cable,stay set complete,t-off channel,clamp for t-off channel,11 kv disc insulator,11 kv disc fitting,concreating of pole,danger plate complete,barbed wire gi 1/2 per pole,dismantling and removal of existing conductor/cable/gi wire from the various area preparing their coils and then stacking in the respective jes (store) as per direction of supervising engineer. it includes the work of cartage, cost of labour, t&p carrier etc. required for proper completion of work.acsr weasel conductor scrap,steel & scrap,g.i. wire scrap,11 kv 3x185 sq.mm. xlpe cable scrap

CTN :37971233

26 Dec, 2024 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of supply of liu with fiber management system , supply of structural steel , fabrication of structural steel , supply of reinforcement steel , supply of hdpe pipe , supply of armoured cable , fixing frls earthing , sitc fixed non flp bullet camera , sitc fixed flp bullet camera , sitc of ptz non flp camera , sitc of nas device , sitc of 42u rack , sitc of cctv server , sitc of client ws , 65 inch commercial monitor , 43 inch commercial monitor , sitc of 8 port switch , sitc of - 24 port switch , supply and inst commission testing 8 mt pole , sitc of, ip 66 junction box , supply and laying of armoured power cable , supply and laying of armoured fibre optic cable , supply of cable tray , const back fill trench , pcc 1 2 4 , rcc 1 1.5 3 - footing pile cap , excavation , supply and laying 50 mmx6 mm gi earthing st , supply and commissioning of vms software per camera , camc for 3rd year , camc for 4th year , camc for 5th year

CTN :38585344

18 Dec, 2024 4.75 Lacs

Bundi - Rajasthan

Tender For work of installing led lights along with pcc pole wire on silor road bundi. (mla fund) - ????? ??? ?????? ?? ?????? ??? ???? ???? ????? ???? ????? ?? ?????? (?????? ???)