Latest pelmet Tenders | Government pelmet Tenders

Central Government And Public Sector

CTN :39832460

16 Apr, 2025 34.90 Lacs

Agra - Uttar Pradesh

Tender For repairs to excavated remains in outer side of mint areas at fatehpur sikri, agra -supply of materials - supply of 1st quality well burnt unslaked lime in a sealed air tight bags including transportation lead, lift & stacking at site. (rate including g.s.t.), supply of fine crushed brick surkhi obtained from 1st class well burnt bricks including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), supply of sieved coarse sand (screened) free from lumps, dust, silt & organic impurities. including transportation lead, lift & stacking at site for measurement. (rate including g.s.t.), belgiri (rate including g.s.t.)., gum babool (rate including g.s.t.)., gur (rate including g.s.t.)., r.r. stone nominal size (rate including g.s.t.), red sand stone 65mm thick (rate including g.s.t.)., brick ballast of lakhori brick/ 1st class brick 40mm size (rate including g.s.t.), earth work in excavation by manual means in foundation trenches, including dressing of sides and ramming of bottoms, getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (rate including g.s.t.), providing and laying in position cement concrete of specified grade 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). (rate including g.s.t.), random rubble masonry with hard stone in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) including t & p, material, scaffolding etc complete. (rate including g.s.t.), providing coursed rubble pathway with hard stone with :cement mortar 1:6 (1 cement : 6 coarse sand) inluding supply of all materials labour t&p etc. required for proper completion of work. (rate including g.s.t.), providing & fixing m.s. grill of required pattern with angle iron frames (40x40x6)mm size graded with square bars 12mm size 10 cm c/c pointed at the top with extra curved bar and each frame with (40x40x6)mm. size horizontal hold fast welded with lower posts and fixing angle iron vertical post (50x50x6)mm size and nut bolts including cutting fabricating welding etc. complete. (rate including g.s.t.), providing and fixing of r.s. joist (175x85x5.80)mm for hanging of m.s. gate including priming at diwan-e-am, fatehpur sikri, agra. (rate including g.s.t.), pdg. 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 c.sand) and a top layer 6mm thick cement plaster 1:3 (1cement : 3 c.sand) finished rough with sponge. (rate including g.s.t.), pointing on stone masonry with cement mortar (1 cement, 3 c.sand) mixing with coloring pigment, t & p, scaffolding etc complete. (rate including g.s.t.), steel work in built up tubular trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. electric resistance or induction butt welded tubes. (rate including g.s.t.), painting with synthetic enamel paint of approved brand and manufacture of required colour :two or more coats on new work. (rate including g.s.t.), red sand stone 75mm thick top fixing in m.s. iron frame/ pathway fine dressed on all exposed surface in required pattern and all material labour t&p etc. required for porper completion of work. (rate including g.s.t.), disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to outside of municipal limits for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge. (rate including g.s.t.), providing and fixing of red sand stone benches having 4 legs of size (0.25x0.25x0.45)m with simple moldings and 8cm thick red sand stone top size 1.50x0.60 m as per design and matching to the existing pattern at site. (rate including g.s.t.), hiring charges of electric / diesel mixer grinder for mortar with operator and fuel etc. co

Central Government/Public Sector

CTN :39702825

07 Apr, 2025 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of modification parts, modification work and installation of door pocket partition frame s in freight emu coaches. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :39787014

01 Apr, 2025 34.27 Lacs

Jaipur - Rajasthan

Tender For budget announcement 2023-24 57(1) (f) institute of dermatology for centre of excellence in charak bhawan at sms hospital, jaipur civil work (234.00 lacs) at p.w.d. sub dn.-sms hospital-ii, jaipur. (supply of furniture) - conference table: supply of conference table size 7680x3050x750mm made of white oak wood, oak veneer and ss 304 frame. top thickness 30mm made of bwp plywood with white oak veneer pasting on both sides and edges covered with 30x23mm thick white oak wood with miter joints, modesty panel inner and outer shall be made of 18mm thick bwp plywood with white oak veneer pasting. the legs (08 nos.) shall be made of ss 304 grade with pvd coating. table top shall be supported with 02 nos. 40x25mm ms hollow pipe black powder coated which are connected to ss legs. all wood surfaces shall be polished with water based nontoxic pu polish. electrical pop-up box/cable cubby (16 nos.) with built in sockets as per requirement along with wire management system shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., high back chair cushioned : supply of high back chair size 650x580x1200 mm with cushioned seat and back rest. the seating height of the chair ranges from 425mm to 545mm from floor. the seat and back are made up single piece l-plywood and upholstered with leatherette and molded polyurethane foam of density 40 kg/m3. the cushioned armrests are injection molded from polypropylene. the mechanism is designed with features such as knee tilt, 360 degree revolving type, upright position locking back, seat / back tilt adjustment. the chair shall have pneumatic height adjustment of 100mm & class 3 gas lift. ss finish base fitted with 05 nos. of twin wheel castors which are injection molded in black nylon. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, chair :supply of chair size 500x500x900mm. the seat and back is made up of 12mm thick hot pressed plywood and upholstered with leatherette and polyurethane foam of density 40 kg/m3. the one piece armrests are injection molded from black polypropylene. the frame is made of dia 19mm x 2mm thick m.s. tube with ss finish. foam of approved brand sleep well, feather foam, kurlon or equivalent. all complete as per approved by engineer in-charge, storage cabinet : supply of storage cabinet size 900x450x750mm made of white oak wood & oak veneer. the cabinet frame section 35x23mm & legs section 33x33 shall be made of solid white oak wood. side panels / shutters / drawers made of 18mm thick bwp plywood with white oak veneer pasting. stone top 20mm thick shall be provided which is pasted on 18mm thick bwp plywood. all wood surfaces shall be polished with water based nontoxic pu polish. good quality telescopic channel/hinges/locks etc. shall be provided. wood should be of superior quality kiln dried white oak having moisture content not more than 10% and processed with anti-termite treatment in a pressurized chamber to be used. plywood /veneer should be of approved make greenply, century ply, duro or equivalent. laminate should be of approved make greenply, century ply or equivalent. polish of all wood surface shall be finished in approved shade with 03 coats of water based polish in satin finish with prior sanding, sealing with fillers and water based sealer. all complete as per drawing and approved by engineer in-charge., computer table : supply of computer table size 1200x

State Government

CTN :39835940

04 Apr, 2025 34.42 Lacs

Gandhinagar - Gujarat

Tender For 2215 water supply & sanitation. - (107) gandhinagar sewage scheme. supply & delivery rcc precast m.h frame & cover, tracing of old manhole, labour for break down, repairing work, carting and fixing m.h., chamber seat and cover and repairing damaged m.h and raising m.h up to road level, providing dummy or plug the running sewer, loosen, de-silt and thoroughly clean and remove debris from pipe line, and others miscellaneous work from sargasan to jashpur s.t.p. trunk main drainage line in g.t.s.

State Government

CTN :39835941

04 Apr, 2025 38.12 Lacs

Gandhinagar - Gujarat

Tender For 2215 water supply & sanitation. - (107) gandhinagar sewage scheme. supply & delivery rcc precast m.h frame & cover, tracing of old manhole, labour for break down, repairing work, carting and fixing m.h., chamber seat and cover and repairing damaged m.h and raising m.h up to road level, providing dummy or plug the running sewer, loosen, de-silt and thoroughly clean and remove debris from pipe line, and others miscellaneous work from jashpur to jethlaj trunk main drainage line in g.t.s.

Central Government/Public Sector

CTN :39847217

17 Apr, 2025 NA

Kothagudem - Telangana

Tender For supply of bricks , 10mm stone aggregates , 20mm stone aggregates , 40mm stone aggregates , coarse sand , fine sand , moorum filling material , portland cement , vitrified floor tile 60x60 cm , white cement , paint primer , distemper paint , acrylic smooth exterior paint , synthetic enamel paint , cement base wall care putty , roller brush , 100mm brush , tmt bar 12 mm 880 kg and 08 mm 250kg , binding wire , rectangular hallow section , gi plan sheet barge board upto 300 mm and gutter 600 mm over all girth , cgi precoated galvanised iron sheet , self screw , welding rod , 4 inch cutting blade , iron angle frame for door angle size 40x40x6 mm , wooden door 35 mm thick shutters , iron angle window with grill bar and glass panes fix with silicon complete all fitting accessories , tower bolt , handle , aldrop , calcium silicate reinforced with fibre and natural filler false ceiling tiles of size 595x595 mm , 4 mm dia steel wire rope lock u clamp set pu coated , aluminium with stainless steel ss coating 4 ftx 3 mtr mosquito net wire and meshs , 1.5 sqmm single core wire , 2 .5 sqmm single core wire , 6 amp switch , 6 amp socket 5-pin , 16 amp switch , 16 amp socket , ceiling rose , 1200mm ceiling fan , modular fan regulator , led tube light 20 watt , 16 amp single pole mcb , 32 amp double pole mcb , mcb box 8 way , pvc board size 9x8 inch , 25 mm casing capping , 25 mm casing capping clip , screw 1.5 inch , 6 mm pvc gatti , pvc 6 way board , insulation tap , contractor mason labour and electrician charges for construction of barrack size 20 feet x 60 feet and 5 feet veranda with brick wall plastering floor tiling false ceiling work etc bid number/ & ( * ) : gem/2025/b/6091302 dated/ + : 27-03-2025 bid document/ 3 3 1 / 43

Central Government/Public Sector

CTN :39826384

22 Apr, 2025 NA

Dibrugarh - Assam

Tender For tender for supply of surgical and consumables hospital furniture etc to assam medical college hospital dibrugarh - supply of surgicals, consumables and hospital furniture, absolute alcohol, absorbable gelatine sponge ip 66 80mm x 50mm x 10mm, absorbent cotton wool ip 300gm roll, adhesive tape 7.5cm x 5 mtr spool, alcohol swab, aldheyde free disinfectant, anti septic solution 1000 ml, bandage 90cm x 18mtrs,, betadin ointment tube/nanz/ collapsible tube, betadin solution 500ml (5%), bleaching powder, cannula fixer, cidex solution 2.45% 1000 ml, collagen sheets 10 x 10cm, cotton crepe bandage b.p. size: 4mtr x 6 cm, cotton roll 500gm, disinfection solution 5 ltrs jar, elastic adhesive bandage 10cm x 1mtr, formalin, gauge cloth 90cm x 18mtr, gauge swab non sterilized, gauge swab sterilized, glycerol, hand sanitizer, hand wash 500ml bottle/, hydrogen peroxide, hypoallergenic non-woven tape, size: 5m x 2.5cm, hypoallergenic non-woven tape, size: 5m x 5cm, lysol, mackintosh sheet, methylated spirit 1 ltr jar, micro-porous plaster size: small/each box, micro-porous plaster size: big/each box, paper adhesive size: 1" x 9.0 mts, paraffin gauge dressing b.p. size: 10cm x 10cm, phenyl 450 ml bottle, phenyl solid, plaster of paris bandages bp size: 15cm x 2.7 mts, plaster of paris bandages bp size: 10cm x 2.7 mts, raxin sheet, rectified spirit 450ml, roll bandage 10cm x 5mtrs, rolled bandage 5cm x 5mtrs, 100gm/doz, rolled bandage 5cm x 5mtrs, 60gm/doz, savlon, senitary napkin, sodalime 5kg jar, surgical gauge pad, back rest, bed side screen 4 fold, biomedical waste bin trolley, door screen white, size: 200cm x 114cm/, dressing trolley, dressing trolley big size, ecg trolley, foot step (double step), foot step (single step), fowler bed (deluxe), hygiene trolley, icu bed (fowler), icu bed (mannual), icu bed with remort control, instrument trolley, instrumet cabinet, medicine cabinet, medicine trolley, mosquito stand, orthopedic bed, oxygen cylinder carrying trolley, oxygen cylinder trolley (d-type) 140cm hight tubular ms frame work fitted with wheel 125mm dia., patient carrying trolley, patient examination bed, patient examination couch, patient examination table, pediatric bed, revolving stool, revolving stool ss, saline warmer, semi fowler bed, semi fowler bed (super) with mosquito net stand, sevotec veporiser, stretcher, stretcher on trolley, waiting chair (regular), ward bed (general), wheel chair, mosquito artery forceps, speculam, pvc pipe for central line, reservior bag for anaesthesia machine, anathesia face mask 0,1,,2,3, black rubber mask 1,2,3,4, uterine sound, towel clip, ecg paper for schiller machine model at2 per packet, ecg paper for edan machine per packet, laryngeal mask airway size 1,1.5,2,2.5, i gel size 1,1.5,2,2.5, bowl stand, sterlized drum trolley, volcellum, post vaginal well retractor, cup t removal hook, anti vaginal well retractor, cunalty, coscors self retractor, angle lip retractor, hegari dilator, theraputic paraffin wax, absolute alcohol (denaturated alcohol), absorbable gelatine sponge ip 66 80mm x 50mm x 10mm, absorbent cotton wool ip, 300 gm roll, adhesive tape, 7.5cm x5mtr spool, alcohol swab, aldheyde free disinfectant, all container vial ( non vaccum, non iradidiated), clot. activitor, b cit 3.2%, glucose, edta, esr, etc., all container vial (vacuum, iradidiated), clot. activitor, b cit 3.2%, glucose, edta, esr, z no add, k2, k3, allies tissue forceps, size: 6 , 8 , autoclave big, size:big, autoclave, size: medium, autoclave, size:small, b.p. bulb, b.p. handle stainless steel, size: 3, b.p. handle stainless steel, size: 4, bandage cloth, size:90cm x 18mtrs, 325gm, barium sulphate 5 kg jar, bed pan, betadin solution 500ml (5%), bleaching powder, blood administration set disposable sterilized, bp blade, size: 11,15,20,21,22,23,24, bp instrument stand type, bp instrument (mercurial) table model, b.p instrument (digital), cannula (3 way), cap (disposable), carbon di oxide b-type cylinder (as per latest iso s

Corporations And Associations And Others

CTN :39832502

29 Mar, 2025 4.96 Lacs

Rajouri - Jammu And Kashmir

Tender For supply of precast material such as precast rcc slabs, premix cold emulsion bitumen bags etc. for day to day repair work at m.c. store hari nagar ward no.99/wz. - description/ item, p/f precast rcc slabs/grating 70mm thick manufactured with cc 1:2:4 stone aggregate 20mm nominal size) reinforced with 96 kg/m3 of rcc i/c lapping all four side with m.s. sheet 1.6mm thick and fixing in position complete (drain covers with or without holes), supply and stacking premix cold emulsion bitumen bags, supply and stacking preacst rcc grating with frame 500x450mm, supply ans stacking circular shape 560mm thick shutters with frame ehd 35

CTN :39841147

05 Apr, 2025 28.00 Lacs

Bikaner - Rajasthan

Tender For repair and maintenance work of sewer, manhole, frame, cover, drain and cross in ward 15,25,33,38,70,71,73,77 arc

CTN :39841822

03 Apr, 2025 7.65 Lacs

Palghar - Maharashtra

Tender For fabrication, supply and installation of aluminium frame partition at in-active lab of lwtp and storage cabin for mechanical work shop in wip of wm, nrb, barc, tarapur

Pelmet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors