Latest platform weighing balance Tenders | Government platform weighing balance Tenders

CTN :38917495

01 Feb, 2025 12.00 Lacs

Jind - Haryana

Tender For purchase of various apparatus/instruments required for department of chemistry, chaudhary ranbir singh university, jind - stirrer the stirrer should be made up of ceramic coated aluminium alloy top with digital speed and temperature control. the stirring speed should be 50-1500 rpm or better. the stirrer should be operational up to a temperature range of 300oc with an accuracy of 1.0oc and ip 42 protection class. the input power should be 600 w or above. the stirrer should be supplied with hemispheric bowl (100 ml= 1 no; 250 ml= 1 no) to replace oil baths and mantles in order to perform clean and safe analysis with round bottom flasks., electronic balance the electronic balance should have a maximum weighing capacity of 200 g or more with a resolution and repeatability of 0.1 mg, and a response time of 5 sec or better. the system should have automatic internal calibration with touch screen display. the system should have internal database capacity of 2500 or more with multiuser password protection feature. , vacuum pumpthe pump should be operational at a maximum power of 65 w or more with a max. vaccum of 99 mbar or more. the pump should be fitted with vacuum and filter cartridge., hot air oventhe inner chamber should be made of stainless steel and the outer chamber should be m.s powder coated. the maximum capacity of the oven should be 100 ml or more. the operational temperature should be between ambient to 250 oc or more with a temperature accuracy of 1o c. pid based digital temperature control., double distillation unitthe unit should be pyrogen free with a distillation water output capacity of 1.5 l/h. the minimum cooling water requirement should be 1lt/min. auto-power cut facility in case of halted supply of water., circulating oil baththe oil bath should be made up of stainless steel with 4 digit 7 segment led display for temperature and time. the bath should have s.s perforated tray for holding flasks. the bath should have a capacity to accommodate flask of 1l. the working temperature range should be +5 to 240 oc (0.1 oc increment) with a temperature stability of 1oc., water baththe water bath should have a capacity of 20 l within built water level sensor. the bath should be made up of stainless steel and supplied with 8 concentric rings. the bath should have digital temperature control with pt100 sensor. the system should have stirring capability with ptfe magnetic bars. , ph conductivity meter operational between a ph range of -2 to 16.00 with a resolution of 0.01 ph and an accuracy of 0.02 ph. 5 points calibration. the ec range should be in between 0.00 to 29.99 s/cm, uv cabinet operational at two uv wavelengths (254 and 365 nm). the cabinet should also be equipped with one visible light. the external body should be coated with ms powder/epoxy., flame photometerapplication: the flame photometer is used for qualitative and quantitative determination of several cations, especially for metals that are easily excited to higher energy levels at flametemperature. these metals include na+, k+, ca2+, ba2+ and li2+.specification requirementmeasuring range na+: 0 to 99.9 ppm k+:0 to 99.9 ppm ca2+ :0-99.9 ppmli2+: 0 to 99.99 ppmsensitivity na+= 0.1 ppmk+ = 0.1 ppmspecificity less than 0.5% interference when concentrations are equal to test sample concentrationsgas control-adjustable with knobsignition system-auto ignition systemflame failure-auto detectiongas cut off-automaticreproducibility-less than 1% coefficient of variation for 20 consecutive samplesusing 10 ppm na set as maximum standardlinearity-less than 1%display led, 12.5 mm (1/2")fuel supply-high-grade propane/butane mixture regulated at approximately30 psiair supply-6 l/min at 12 psi; oil and moisture freerecorder-output 0.05 to 5 v (switchable)operating manuals, service manuals, other manuals should provide user, technical and maintenance manuals in english language list of equipment and procedures required for local calibration and routine maintenance service and

CTN :38306755

20 Jan, 2025 31.92 Lacs

Aizawl - Mizoram

Tender For corrigendum : supply of pharmacy - high speed centrifuge , isolator transformer , digital plethysmometer , trolley for mice and rat cage , visitor chair , library staff station reader , uninterrupted power supply , centrifuge , electronic balance , incubator with shaker , deep freezer , visicooler

State Government

CTN :38644191

21 Jan, 2025 2.14 Crore

Siddipet - Telangana

Tender For corrigendum : procurement of tools and equipments for tandur and siddipet iti - combination plier insulated , screwdriverinsulated diamond head , screwdriver insulated , electrician screwdriver thin stem insulated handle , heavy duty screwdriver insulated , electrician screwdriver thin stem insulated handle , punch centre , knife double bladed electrician , neon tester , steel rule graduated both in metric and english unit with precision of 1/4th mm , hammer cross peen with handle , hammer ball peen with handle , pincer , c clamp , c clamp , spanner adjustable drop forged ss , spanner adjustable drop forged ss , blow lamp brass , chisel cold , chisel firmer with wooden handle , allen key alloysteel , grease gun , bradawl , pully puller with 3 legs , bearing puller inside and outside , pipe vice cast iron with hardened jaw open type , scissors blade ss , scissors blade ss , crimping tool , crimping tool , wire cutter and stripper , mallet hard wood , hammer extractor type , hacksaw frame , hacksaw frame , try square , outside calliper , inside calliper , divider , pliers long nose insulated , pliers flat nose insulated , pliers round nose insulated , tweezers , snip straightheavy duty , snip bent heavy duty , de metricspanner double ended , drill hand brace , drill ss twist block , plane cutters , smoothing cutters , gauge wire imperial stainlees steel marked in swg mm , file flat , file half round , file round , file flat rough , file flat bastard , file flat smooth , file rasp half round , copper bit soldering iron , de soldering gun , hand vice , table vice , oil can , contactor and auxiliary contacts , contactor and auxiliary contacts , contactor and auxiliary contacts , contactor and auxiliary contacts , limit switch , rotary switch , relay , a cut out relays , b reverse current relays , c over current relays , d under voltage relays , pin type insulators including hardware fitting , shackle type insulators including hardware fitting , egg type insulators including hardware fitting , suspension type insulators including hardware fitting , hydrometer , hand drill machine , portable electric drill machine , load bank lamp heater type , brake test arrangement with two spring balance rating , laboratory type induction coil , out side micrometer , thermometer digital , series test lamp , knife switch dpdt fitted with fuse terminals , knife switch tpdt fitted with fuse terminals , miniature circuit breaker , earth plate , earth plate , earth electrode , mccb , elcb and rccb , elcb and rccb , fuses , fuses , fuses , rheostat sliding type , rheostat sliding type , rheostat sliding type , rheostat sliding type , capacitors , capacitors , capacitors , capacitors , capacitors , various electronic components , various lamps , various lamps , various lamps , various lamps , various lamps , various lamps , plug socket , piano switch , lamp holder , cables , nonmetallic sheathed cable , underground feeder cable , ribbon cable , metallic sheathed cable , multiconductor cable , coaxial cable , directburied cable , bus bar with brackets , rubber mat , electrician helmet , rcc pole with accessories ms angle iron c clamp stay insulator etc and materials , safety belt , ohm meter series type and shunt type analog , ohm meter series type analog , ohm meter portable box type , digital multi meter , a.c voltmeter mi analog portable box type housed in bakelite case , milli voltmeter centre zero analog portable box type housed in bakelite case , ammeter mc analog portable box type housed in bakelite case , ac ammeter mi analog portable box type housed in bakelite case , kilo wattmeteranalog , digital wattmeter , ac energy meter , ac energy meter , power factor meter digital , frequency meter , magnetic flux meter , lux meter , tachometer , tachometer , tong tester clamp meter , megger , 3 point dc starter , 4 point dc starter , wheat stone bridge with galvanometer and battery , single phase variable auto transformer , phase sequence indicator , gro

CTN :38777644

23 Jan, 2025 63.50 Lacs

Jaipur - Rajasthan

Tender For corrigendum : scientific lab items - item, auto clave, bone pulveriser, microtome, refrigerated centrifuge, single pan digital balance ()nos.2, bullet puller, dry bath, shaking water bath, vortex roatetor (nos.2), water bath (nos.5), abbe refrectometer for r.i of glass, electronic balance, ir-uv light source with optical flexible guided lights, incubator, digital ph meter (nos. 2), hot air oven, micropipettes set (20 to 200 1,20 to 200 1 and 100 to1000 1), oven

State Government

CTN :38889077

23 Jan, 2025 NA

Guwahati - Assam

Tender For specialized equipment and machineries required in frozen semen bull station, barapettea - water bath for inside pass box for receiving semen samples, water bath (high precision for qc, keeping dilutor and diluted semen), thawing unit, slide warmer, microscope phase contrast with biotherm with lcd display, photometer with printer and dilutor for bovine semen analysis, autoclave for av (large size) vertical, digital compact incubator for bacteriological work in qc lab, digital incubator (large) for keeping artificial vagina (avs), hot air oven, digital compact incubator for collection vials and cone, electronic weighing balance, pass box (dynamic) for semen freezing laboratory, bulk frozen semen storage container, storage cryocan with canister

State Government

CTN :38869319

18 Jan, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 13 numbers of district level water testing laboratories of jharkhand a-ranchi zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230 15 volts a/c), stirring capacity : 50-1500 rpm, plate size : 1 ft *1.5ft (approx), make & model: branded ( is standard), bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is standard), digit

State Government

CTN :38869323

18 Jan, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 9 numbers of district level water testing laboratories of jharkhand a-dumka zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230 15 volts a/c), stirring capacity : 50-1500 rpm, plate size : 1 ft *1.5ft (approx), make & model: branded ( is standard), bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is standard), digital

Central Government / Public Sector

CTN :38882870

30 Jan, 2025 NA

Secunderabad - Telangana

Tender For supply, installation and commissioning of electronic single pan digital analytical balance capacity 220 gm with automatic internal calibration along with standard weight box of class f1 contains 23 numbers of weight (range from 1 mg to 200 gm) as per enclosed technical specification.

CTN :38835302

27 Jan, 2025 NA

Vidisha - Madhya Pradesh

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - lab; equipment botany lab; service provider - monocular inclined led microscope isi murk, dissecting microscope, slide box 100 slides, cmos camera 5 mp(image projection), binocular research microscope with led, water bath 6 hole double walled s.s.chamber, distillation app. double cap 5 litre, hot air oven size 14"x14"x14"s.s.chamber, heating mantle 11., magnetic stirrer with hot plate, vortex shaker, water & soil testing kit digital, digital ph meter with electrode, digital spectrophotometer 340-960nm, digital colony counter, autoclave portable 12"x12" s.s, centrifuge machine 3500 rpm 4 x 15 ml, tlc kit with applicator, electronic digital balance cap. 0.001gm-200 gm

CTN :38835319

27 Jan, 2025 NA

Vidisha - Madhya Pradesh

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - lab; equipment chemistry lab; service provider - analytical weight box 100 gm, chromatography cabinet 6 leaves, digital callorimeter with & filters, digital conductivity meter, digital do meter, kipps apparatus 500 ml, distillation app. double cap 5 litre, electronic digital balance cap.0.001gm-200 gm, electronic digital balance cap.0.01gm-600 gm, 0, heating mantle 51., 1, hot air oven size 14"x14"x14"s.s.chamber, 2, kjeldah digestion app with glass parts

Platform Weighing Balance Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

Central Government / Public Sector