Latest pneumatic cylinder scrap Tenders | Government pneumatic cylinder scrap Tenders

State Government

CTN :39614772

12 Mar, 2025 34.70 Lacs

Latehar - Jharkhand

Tender For supplying of spares part for india mark-ii deep well hand pump under d wand s div latehar for the year 2024-25 - spare parts of deep well hand pump india mark-ii., hexagonal bolt m12 x 1.75 x 40 mm long, hexagonal ( high tensile) bolt 10mm, nyloc nut m10x1.5, handle axle(stationless steel), chain with coupling, handle assembly (gi), water tank assembly (gi), lower valve assembly im ii, upper valve assembly im ii, rubber seat retainer im ii, reducer cap for cylinder im ii, nitrile sealing ring im ii, hexagonal rod coupling, pump head assembly (gi) with front cover bolt & third plate, nitrile rubber clinder sealing big for lower valve for im ii, nitrile rubber clinder sealing small ring for upper valve im ii, nitrile rubber cup washer for im ii & iii, ball bearing 6204z, cylinder assembly complete set for im ii cylinder, cylinder body with brass liner for im ii with reducer cap for top & bottam, upper valve guide, b.s connecting rod, spacer, add 5% gst.

State Government

CTN :39601440

11 Mar, 2025 35.85 Lacs

Ranchi - Jharkhand

Tender For supply of spare parts for standard deep well hand pump im ii/im iii under d.w.and s. division, ranchi west, ranchi during the year 2024-25. - spare of deep well hand pump for im-ii & im-iii (vlom-65 & vlom-50) conforming to is:15500 (relevant part 1 to 8)/2004 (with latest amendment) only from manufacturers/ suppliers approved from bis/unicef after proper verification of offer sheet, inspection certificate, marking and packing etc, as per bis/unicef s standard norms., hexagonal bolt m12x1.75x40mm long common to im ii & iii, handle axle (stainless steel), ball bearing 6204 z, spacer for handle, chain with coupling, hexagonal rod coupling m12x1.75x50mm long., nitrile rubber cup washer for india mk-ii, pump head assembly (g.i.) with front cover , hexagonal nut & bolt & third plate., front cover (g.i.), handle assembly (g.i.), (a) water tank assembly for mark ii (g.i.), connecting rod 3mtr. long with coupling and nut (electrogalvanized), cylinder assembly complete set for im-ii, upper valve(plunger) assembly complete set for im ii, lower (check) valve assembly complete set for im ii, plunger rod (s.s,) for mark-ii, upper valve guide (g.m.) for mark-ii & mark-iii (vlom-65), third plate for head assemble (galvanized), cylinder body with brass liner for im-ii with reducer cap for top and bottom., gun metal spacer (bucket), 32mm g.i. socket, add 5% gst

State Government

CTN :39601442

12 Mar, 2025 30.00 Lacs

Ranchi - Jharkhand

Tender For supply of spare parts for standard deep well hand pump im ii/im iii under d.w.and s. division ranchi east, ranchi during the year 2024-25. - spare of deep well hand pump for im-ii & conforming to is:15500 (relevant part 1 to 8)/2004 (with latest amendment) only from manufacturers/ suppliers approved from bis/unicef after proper verification of offer sheet, inspection certificate, marking and packing etc, as per bis/unicef s standard norms., hexagonal bolt m12x1.75x40mm long common to im ii & iii, hexagonal nut m12x1.75mm, hexagonal rod coupling m12x1.75x50mm long., cylinder body with brass liner for im-ii with reducer cap for top and bottom., hexagonal bolt for front cover m12x1.75x20mm long., upper valve(plunger) assembly complete set for im ii, lower (check) valve assembly complete set for im ii, upper valve guide (g.m.), reducer cap for cylinder mark-ii, check valve guide mark-ii, g.m. spacer i.m. -ii, rubber seat retainer for mark-ii, b.s. connecting rod 3.00 m long, water tank assembly for mark ii, c.i. cylinder im-ii, pump head assembly, plunger rod (ss) for mk -ii, add 5% gst

State Government

CTN :39614819

12 Mar, 2025 31.14 Lacs

Ramgarh - Jharkhand

Tender For supply of spare parts of deep well hand pump conforming with latest amendment under dws division ramgarh 204-25 - spare parts of india mark ii deep well hand pump conforming to i.s. - 15500 (pt-ii)/2004 to be procured only from approved manufacturers from approved manufacturers from unicef approved qualified supplier & after proper verification of offer sheet inspection certificate marketing and packing etc as per unicefs standard norms, hexagonal bolt m12x1.75x40mm long common to both mk-ii & iii., hexagonal nut m12x1.75. , high tensile bolt m10x1.5x40mm long., nyloc nut m10x1.5mm, handle axle (stainless steel)., ball bearing 6204z., spacer for handle, chain with coupling., nitrile rubber cup washer for mark-ii & ill., nitrile rubber sealing ring mark-ii., nitrile rubber seating big for lower valve mark-ii., nitrile rubber seating small for upper valve mark-ii., hexagonal rod coupling m12x1.75x50mm long, pump head assembly (g.i.), front cover (g.i.), handle assembly (g.i)., water tank assembly for mark-ii (g.i.), connecting rod 3mtrs long with coupling & nut (electrogalvanized)., cylinder assembly complete set for india mark-ii., upper valve assembly complete set for lm-ii, lower valve assembly complete set for im-ii, reducer cap for cylinder mark-ii, plunger rod (s.s.) for mark - ii, upper valve guide (gm)., rubber seat retainer far mark- ii, third plate for head assembly (galvanized), cylinder body with brass liner for im-ii with reducer cap for top & bottom., brass linear, check valve seat for mark - ii, 32 mm g.i. socket, gst @ 5% (add sgst 2.5% + cgst 2.5%)

State Government

CTN :39408852

12 Mar, 2025 NA

Karur - Tamil Nadu

Tender For corrigendum : procurement of auto garage equipments spares annual rate contract - auto garage equipment spares, hourmeter 12v make:yenkey-electronics-615091020001, tc oil filter element - ek3246 elofic / pi 441800., master cyl. assy.(tandam)-p.no.:29066698, make:bi, wheel cylinder lh - part no. 64677953 -tvs girling, wheel cylinder kit - mi no.64967159,make: tvs-bt, universal joint kit-part.no.112007 - xlogwb/gogo / model gx 20, oil filter element for bolero jeep make: purolator - pi-170300 / pi - 530500, air pressure gauge - p. no. : 2150 make : pricol, engine oil pr. gauge ( 0-7 kg/cm2 ),make - pricol - p.no: 2017, ammeter - part.no. 4035 / 40005 make: pricol only, trans. clutch pressure gauge - 2155 make:pricol / oe part no.: 8000102906, diaphragm p.no. : 843 310 make : tvs-wabco, spring - p. no. : m 843300 make : sundram clayton, seal assy p.no. m-841000 make: sundram clayton, elgi air horn asy.-make:elgi,model:std-p.no:s09101, unloader valve -m301910 hm - 81011976 make : s.c., radiator cap, small 7 lbs - part no.ho-103, make : hold on / sippy brass type, radiator cap - big size 69mm dia filler neck, shim for pinion nut 24v self motor 9030-896, pinion & bearing assy.24v 11 teeth - 9030-859 aa, clutch outer plate for 24v self motor 9030-951 a, clutch inner plate for 24v self motor 9030-876 b, pressure plate for clutch 24v self motor 9030-623, plunger assy for armature 24v self motor 9030-298a, field coil(main) for 24v self motor 9030-51, solenoid switch assy for 24v self motor 267-4a, field coil (aux.) for 24v self motor - 9030-52a, carbon brush for 24v self motor - 9030-644, brush carrier assy for 24v self motor - 9030-77, c.e. shield assy for 24v self motor - 9030-76, thrust washer for armature 24v self motor-9030-237, bearing bush for de shield p.no:9030-693 (:make: lucas-tvs / kirloskar/ menon), oil seal-de shield assy24v selfmotor9030-808pos3850, packing washer (namada)24v self motor 9030-1241 ( 1 packet consist of 50 nos ), field connector for solenoid 24v - 9030-932, positive connector for solenoid switch - 9030-930, moving contact for solenoid switch 24v - 9030-1190, horn assy 24 with condenser vibersonic 21 -v c/fht (make : roots ), point set-12v/ 24v roots make horn vibrosonic type, carbon brush for 8" remi coach fan (type: c.f.-20), regulator assy 24v alternator - p.no. 26938063 a, brush assy for 24v alternator 9030-340, brush box assy for 24v alternator 9030-315a, fan assy for 24v alternator 9030-683, heat sink assy (aux) 24v alternator 9030-1603b, heat sink assy.negative-24v alternator- 9030-1939, de shield for 24v alternator - 9030-1688 d, fixing screw for de shield alternator - 9030-382, wiper blade - 81001915, battery terminal positive-brass, stp type, battery terminal negative make : shanco, stp type, regulator for 12v alternator - 26214575, bulb no 67,12 v, bulb halogen 12v-60/55w make:mico bosch no. 99510300041, pull & push switch - make : minda / hella long thread, ignition key switch - part.no. j-1019 - make : jay, starter button brass body with sealed rubber boot type - make :pricol ,part no: 3516, head light switch 24v- part.no. 6rd922504-make:pmp, head light holder - hp 1656 make: harson, head light assy. - part. no. : vsh-1431 / vsh-1432, make : vasko, 03 pin type, lucas type (02 nos. per set) ( make: anl-lux, mahindra di round: 81-5124), bulb 24 v-21w -pin type no:2441, bulb no.67, 24 v, allite p.no.t-711, bulb head light halogen 24 v 100/90 w collar type, electronic flasher unit - 24v - make: hella, copper ring terminal 50 sq.mm non insulated-7137, wire 4mm size: 32 / 0.2,max od : 1.95mm, finolex make, wires 5mm size:28/0.3, max od : 2.55mm, finolex-make, wires 6mm size:35/0.3 , max od : 2.75mm, finolex make, wires 8mm size:65/0.3, max od : 3.9mm, finolex-make, main bearing 010 u/s p.no:f0218210 make:bm copper, main bearing thrust washer(std-size) make: kir/ bm, tappet p.no: f4330022 make:al, connecting rod bearing-std size make:bimetalcopper, con. rod bearing 010 u/s, make :bm copper ., c

State Government

CTN :39603090

17 Mar, 2025 36.0 Thousand

Bundi - Rajasthan

Tender For cylinder body with brass line in divisional store bundi. sealed tenders are invited for disposal of scrap and unusable waste items.

CTN :38137730

08 Mar, 2025 NA

Bangalore - Karnataka

Tender For bid to ras corrigendum : proc of items reqd for mfr of iwts sml qty 02 nos - threaded , nut _ bolt _ nut _ bolt 11mm length_3.5inch_with washer , shavo regulator _ shavo air regulator 30 kg load presure with guage , compressor _ industrial air compressor 30 bar model , pu pipe _ pu pipe janatics pneumatics 12mm 30 bar , t joint _ 6mm t joint model wp2300606_pu 6 black t , elbow joint _ 6mm ellbow joint model wp2200606 , brass adapter _ pu 6 brass adapter 1_2 inch external thread , brass adapter _ pu 6 brass adapter 1_4 inch external thread , solenoid valve _ solenoid valve 30 bar 12v dc with relay , brass adapter _ brass adapter 1_2inch , brass adapter _ pu 12 brass reducer 1_2inch , coupler _ stainless steel flange coupler 1inch internal dia , ss coupler _ nut _ bolts for flange coupler 1inch internal dia , thread sealent _ thread sealent jointing paste loctite_243 400 ml , teflon tape _ teflon tape for sealent roll , thread bundle _ thread bundle for pipe threads 1 bundle , tag _ tie _ tag and tie universal type pack , cap _ casing _ 6mm dia cap _ casing , wooden screw _ 3mm wooden screw length 1_4inch , wooden screw _ 2mm wooden screw length 1_2inch , wooden block _ wooden block universal type , soft wood _ soft wood pieces 18x14x20mm , paint _ white enamel type 1 ltr , lubricant _ compressor lubricant oil elgi part no 000998052 , lubricant _ air lube elgi part no 000998044 , pneumatic cylinder _ pneumatic cylinde ss _25mm bore x 70mm , pneumatic cylinder for rl _ pneumatic cylinder ss _80mm bore x 100mm stroke , pneumatic cylinder for mgl _ pneumatic cylinder ss for mgl , ss pipe _ ss pipe industrial 1_2 inch dia , flange gasket _ coupler flange gasket rubber 3mm thickness , legris blue pipe _ legris blue pipe nylon semi rugged 6mm outer dia , reducer _ brass reducer 1 inch x 3_4 inch dia , silencer _ silencer wire mesh 1_2 inch dia external thread , ss union _ ss union 1 inch internal dia with thread , ss pipe _ stainless stell pipe 2 feet and one side thread , welding rod , 10 core cable unshielded , 3 core power cable 15 a , 3 core power cable_ 5a , 3_pin plugs 5a anchor _ isi standard , 5a socket _ anchor , computer power cord 230 v ac_ 5 a_ 3 mtr length , power extension board _ spike buster 15_5 amp , power extension board _ spike buster , teflon wire multi_strand black , teflon wire multi_strand red , teflon wire multi_strand white , teflon wire multi_strand yellow , teflon wire multi_strand green , teflon wire multi_strand brown , teflon wire multi_strand violet , teflon wire multi_strand blue , teflon wire multi_strand purple , teflon wire multi_strand orange , adhesive 20ml tube , solder soft _100 gm roll , adhesive loctite aa324 , industrial grade adhesive fevikwik , heat shrink sleeve _ heat shrink sleeve 6mm black , heat shrink sleeve_heat shrink sleeve 3mm black , insulation tape _roll_ wonder tape 10 mtr roll pvc , transparent tape 2inch _ transparent tape 2inch , instrument cooling fan _ ac 230v , universal adapter for 3 pin plug _ for 6 amps , modular firing platform for kneeling_standing , firing mat with padding _ 6x3 with padding , firing pillows _12 x big _ 12 x small_ 1x2x2 feet and 1x2x4 feet , instructor keyboard rack _ ms with black powder coating , instructor chair _ isi standard , manufacturers lable plate _ 515 army base wksp manufacturer plate , projection stand adjustable with screen modified for iwts _ 10x30 feet , mounting stand video projector _ projector mounting stand with 10 mm , ruggedized enclosure for projector _ lxbxh 24x22x8.5 inch , white velcro _ adhesive velcro 5m _2 inch , fasteners_ a screw slotted cheese head and items as per specification , bid details/ 2 / 115 cable ties and tie bases _25mm , cable ties and tie bases _50mm , spiral pipe 1.5inch dia , allen key _2_3_4_5_6_7_8_9 set of 8_ isi standard , nose plier _ isi standard , screw driver set _ isi brand , spanner open_jaw 13_17 _ isi standard , spanner open_jaw 24_27 _ isi standard , spanner open_jaw 17_19 _ isi standard

CTN :39585928

10 Mar, 2025 NA

Sundergarh - Odisha

Tender For tender for calibration of instrument- g.i frame sieve 45 em dia 125 mm , g.i frame sieve 45 em dia 100 mm , g.i frame sieve 45 em dia 90 mm , g.i frame sieve 45 em dia 80 mm , g.i frame sieve 45 em dia 75 mm , g.i frame sieve 45 em dia 63 mm , g.i frame sieve 45 em dia 53 mm , g.i frame sieve 45 em dia 50 mm , g.i frame sieve 45 em dia 45 mm , g.i frame sieve 45 em dia 40 mm , g.i frame sieve 45 em dia 22.4 mm , g.i frame sieve 45 em dia 11.2 mm , g.i frame sieve 30 em dia 40 mm , g.i frame sieve 30 em dia 20 mm , g.i frame sieve 30 em' dia 10 mm , g.i frame sieve 30 em dia 4.75 mm , brass frame sieve 20 em dia 4.75 mm , brass frame sieve 20 em dia 2.36 mm , brass frame sieve 20 cm dia 1.18 mm , brass frame sieve 20 cm dia 600 micron , brass frame sieve 20 cm dia 300 micron , brass frame sieve 20 cm dia 150 micron , brass frame sieve 20 cm dia 90 micron , brass frame sieve 20 cm dia 75 micron , electronic weighing balance 10 kg capacity , digital balance make contact 20 kg capacity , digital balance make contact 50 kg capacity , measuring cylinder 50 ml capacity(glass) , measuring cylinder plastic 100ml capacity , measuring cylinder 250ml capacity(glass) , measuring cylinder plastic 500 ml capacity , slump test apparatus with testing rod , concrete hammer test with nccbm calibrated , mould cast iron 150 mm cube , core cutter 4" with dolly hammer , rapid moisture meter , ph meter digital, 4-14ph , vicat needle apparatus lsi marked , le-chatelier mould as per is (set of 6) , ctm - 2000 kn (digital) , aggregate impact testing with blow counter , flakiness gauge lsi marked , elongation gauge lsi marked , bitumen extractor hand operated , field density test apparatus sand replacement method , bulk density cylindrical metal measures

CTN :39567244

11 Mar, 2025 NA

Krishnagiri - Tamil Nadu

Tender For purchase civil concrete technology lab items - civil concret technology lab items, [flow table apparatus for concrete :to raise and drop the table top approx 15 times in 15 seconds suitable for operation on 230 volts 50 cycles.a.c supply]flow table diameter=762mm dimension of cone top diameter =170mm bottom diameter =250mm height=120mm dimension of tamping rod 10mm dia&300mm length, le-chatler apparatus with accessories:it consist of small split cylinder 30mm diameter,30mm high made of spring brass forming a mould on either side of the split cylinder, two parallel indicating arms with pointed ends are attached .supplied complete with two glass plate and lead weight.

CTN :39322890

07 Mar, 2025 NA

Ranga Reddy-T - Telangana

Tender For corrigendum : supply of shaft for jungle jim , locker for hydraulic cylinder , ball bearing , blade for jungle jim , brass tacks , service charges

Pneumatic Cylinder Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

State Government