Tender For corrigendum : supply of resin binding hard bound printed section register each of 320 pages (160 sheets)of legal size, 100 gsm paper. each book consists of 160 sheets. matter to be printed on both side of the sheet. matter may vary on front and back of each sheet and also would vary from register to register. note: 1) matter for printing will be given in soft copy after issue of the purchase order. 2) one sample in hard copy to be got approved before effecting bulk printing.
Tender For custom bid for services - job work for preparation of filler loaded composites; the following job activities are required by dlj on monthly basis under the supervision of dlj rep. 1. mixing of resin and filler materials in different ratios, 2. cutting of glass fabric of assorted size, 3. laying of glass fabric as per drawing and requirement, 4. casting of resin-filler slurry on to fabric, 5. stacking of fabric as per sequence and drawing, 6. laying of breather encapsulation with vacuum bag, 7. running of vacuum pump as per required duration, 8. cutting of the composites panels in different sizes, 9. sample preparation for em parameter measurements and different environmental testing's.
Tender For supply of strain gauges : : - high temperature foil type uni axial strain gauges pack of 10 , high temperature foil type bi axial strain gauges pack of 05 , high temperature foil type tri axial strain gauges pack of 05 , epoxy resin adhesive for strain gagues bonding , cleaning pads for strain gauge bonding pack of 450
Tender For custom bid for services - tender for annual rate contract for specialized works at mrpl as per boq and scope of work (bidder has to quote lumpsum price higher or lower than the sor value including gst); 1 1057794 providing and laying of 6 mm frp with bisphenol a epoxy vinyl ester resin(viscosity 450mpa density 1.08g/cm3). 6mm thick laminate with the construction: sv(surface veil)+2x csm(chopped strand mat) 450 g/m2+wr(woven roving 800 g/m2)+csm+wr+csm,glass content 40wt% (tensile strength 150mpa flexural strength 210mpa) including primer as per the technical specifications and directions of the eic. 2 1057795 providing and laying of 4 mm frp with bisphenol a epoxy vinyl ester resin(viscosity 450mpa density 1.08g/cm3). 4mm thick laminate with the construction: sv(surface veil)+2x csm(chopped strand mat) 450 g/m2+wr(woven roving 800 g/m2)+csm,glass content 40wt% (tensile strength 150mpa flexural strength 210mpa) including primer as per the technical specifications and directions of the eic. 3 1057796 providing and laying of 2 mm frp with bisphenol a epoxy vinyl ester resin(viscosity 450mpa density 1.08g/cm3). 2mm thick laminate with the construction: sv(surface veil)+2x csm(chopped strand mat) 450 g/m2+wr(woven roving 800 g/m2)+csm,glass content 40wt% (tensile strength 150mpa flexural strength 210mpa) including primer as per the technical specifications and directions of the eic. 4 1057797 providing and laying of 6 mm frp with isophthalic polyester resin (viscocity of 500mpa tensile strength of 75mpa tensile elongation 4%& flexural strength of 140 mpa ) including primer as per the technical specifications and directions of the eic. 5 1057798 providing and laying of 4 mm frp with isophthalic polyester resin (viscocity of 500mpa tensile strength of 75mpa tensile elongation 4%& flexural strength of 140 mpa ) including primer as per the technical specifications and directions of the eic. 6 1057799 providing and laying of 2 mm frp with isophthalic polyester resin (viscocity of 500mpa tensile strength of 75mpa tensile elongation 4%& flexural strength of 140 mpa ) including primer as per the technical specifications and directions of the eic. 7 1057810 supply and laying of 2 mm frp with general purpose glass and resin including primer as per tender and instructions of eic. 8 1057811 joints repair of existing ppg lining with thermoplastic chemical resistant ppg of 3.5 mm thick where 2 mm will be the sheet and 1.5 mm aprox is the adhesive flooring & lining having tensile strength at yeild not less than 37.59 n/mm2,elongation yield- 25.2%,flexural modulus- 1522.5 n/mm2 and acid and alkaline resistance from ph value 2 to 14 and as per enclosed specification and as directed by eic 9 1016067 supply of thermoplastic chemical resistant ppg of 3.5 mm thick where 2 mm will be the sheet and 1.5 mm aprox is the adhesive flooring & lining having tensile strength at yeild not less than 37.59 n/mm2,elongation yield- 25.2%,flexural modulus- 1522.5 n/mm2 and acid and alkaline resistance from ph value 2 to 14 and as per enclosed specification and as directed by eic 10 1016068 laying of thermoplastic chemical resistant ppg for 3.5 mm thick where 2 mm will be the sheet and 1.5 mm aprox is the adhesive flooring & lining including removal of the exisiting lining,joining/welding etc all complete as per enclosed specification and directed by eic. 11 1028194 supply of 5 mm pp/frp prefabricated system where sheet will be of 5mm in black color with u.v. stabilizing agent. along with material for 5 mm thick frp lining (adhesive) i.e. resin, woven roving, csm and special additive(hsn code 70199090). and as directed by eic 12 1028195 laying of 5mm pp/frp prefabricated system where sheet will be of 5mm in black color with u.v. stabilizing agent. along with material for 5 mm thick frp lining (adhesive) i.e. resin, woven roving, csm and special additive(hsn code 70199090) 13 1057812 providing and applying of epoxy putty filling in irregularitie