Latest polyurethane coating Tenders | Government polyurethane coating Tenders

Central Government/Public Sector

CTN :41596971

16 Sep, 2025 42.58 Lacs

Visakhapatnam - Andhra Pradesh

Tender For provision of external electric supply for 661 sailors inliving accommodation at visakhapatnam - supply, installation, testing and commissioning of outdoor type step down transformer 1000 kva 11kv/433v dyn11 oil filled (onan) distribution transformer double copper wound with radiator wall with conservator tank & porcelain bushing for ht, lt with off circuit tap changer, marshalling box all as per is 1180 (part-1) : 2014, bee certified, energy efficiency level ii (as per latest ammendment no 4) complete as directed., a) off circuit tap changer (octc), tapping range +5% to -10% in a steps of 2.5% per step (7 positions)b) temp. rise shall be 40/45 deg. c for oil/winding resp. over an ambient of 50deg.c tempc) insulation class: ad) losses ( subject to is 1180 efficiency level 2/ star 2 as per latest amendment 4) max. total loss @ 50% loading: 2620 w and max. total loss at 100% loading: 7000 w.e) % impedance (%z) shall be 5.00% (subject to is tol.)f) rating & diagram (r&d) plate (fitted on transformer)g) oil temp. indicator (oti) with alarm and trip contacth) winding temp. indicator (wti) with alarm and trip contactj) rated temp class of transformer compartment k10 upto 1000kvak) lifting lugs/ hooks for transformer.l) oil filling inlet pipe with plug.m) air release valve and drain out pipe with plug.n) conservator tank with level guage.o) silica gel breatherp) first oil fill up to recommended level by manufacturer with new oil as per is 335.q) cable terminal boxes with bushes on both ht and lt sides.r) hv winding: delta & lv winding: star.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply and fixing main lt panel cpri approved made out of crca sheet 3.15 mm thick outdoor pedestal type totally enclosed with front and rear opening, hinged doors with projected an raised platform of suitable size, weather and water proof with necessary locking arrangements along with lugs, cable glands of various sizes for cables, danger notice plate, strickering of switcher gear about termination of switch gear, and the nuts/ bolts etc used are to be made of rust proof material incl as per al bus bar rated with insulators suitable for three phase and four wire lt ac, 50 hz 415 v 2000 a capacity complete with powder coating, necessary internal electric connection as required and provision of the following : (main lt panel)., incoming:air circuit breaker 1600 amps, 50 ka, mdo type, 4 pole, micro processor release, with adjustable type overload protection, short circuit protection, with necessary cts, meters and cable boxes. - 1 no.outgoing:a) mccb 250 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 07 no (bldg vtpn 02 nos, bldg panels 04 nos + spare)b) mccb 140 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (dg amf panel)c) mccb 160 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (ff panel)d) mccb 100 amps, 25 ka, 4 pole, suitable for capacitive loads, thermal magnetic release, with adjustable type overload protection, short circuit protection - 01 no (apfc panel)e) intelligent panel meter to measure voltage, current, frequency, power factor, kwh etc with all connected cts.f) led indicating lamps with colour red, yellow, blue of 03 sets.note: civil work for the construction of foundation including necessary earthwork etc is deemed to be included in quoted rates of the item., supply & fixing of perforated gi cable tray of size 150 mm width x 50mm depth x 1.6mm thickness with perforations not more than 17.5% in convenient sections, joined with connectors, suspended from the ceiling with gi suspenders including bolts & nuts etc as req

State Government

CTN :41676459

20 Sep, 2025 NA

Guwahati - Assam

Tender For empanelment of agencies for supply of different laboratory instruments for various water testing laboratories under jal jeevan mission, assam - ion meter with electrode and accessories for fluoride & nitratemeter: ph/ion/ mv-redox-orp/ temperature benchtop meter with electrode for testing both fluoride & nitrate separately in water samples. technical specification: ph range: -2.000 to 20.000 resolution 0.1, 0.01, 0.001 accuracy 0.002 ph + 1 lsd calibration points up to 5 buffer sets: usa/ nist/ din/ custom orp range 2000.0 mv rel. mv range 2000.0 mv accuracy 0.2 mv resolution 0.1 mv ion concentration 0.001 to 19999 ppm resolution up to 3 digits relative accuracy 0.5 % full scale (monovalent) and 1 % full scale (divalent) calibration points up to 8 temperature range 0 to 100 c, 32 to 212 f resolution 0.1 accuracy 0.3 c/ 0.5 f compensation: auromatic temperature correction other requirement: auto buffer recognition, memory 500 with time and date stamp rs 232 alarm for calibration due & out of range alurm auto logging function., fluoride electrode of ion metersame make that of the ion meter, nitrate electrode of ion metersame make that of the ion meter, manifold filtration assembly (to be used for micobiological test)* sturdy and easy to clean ss filtration assembly with funnel, manifold unit, air vent filter and vaccum pump ready to be used for mictobiological testing * specification: # funnel with inbuilt clamp: made of ss 316, capacity: 300 ml, ss filter support base, ss support screan: 47 mm, made of ss 316l; filtration area 9.6 cm2; silicon stopper: size 8, with silicon lid and silicon o ring. # filtration manifold: 3 place manifold, made of ss 316, valves made of ptee, connection 12 mm; suitable for both pp and ss funnel with rubber stopper fittings. # vacuum pump: oil free, piston powered, suitable to be used with 3 possition manifold; max flow rate: 34 l/ min; vaccum stage: double. max vaccum: 100 mbar. the vaccum pump should also have a vacuum suction bottle to protect the pumps componennt by preventing liquid or solid material from entering the pump during filtration process., voltage stabilizer (3 phase)# capacity- 3 kva # input voltage range: 295 v - 465 v normal range # output voltage range 380 v / 400 v / 415 v # output regulation: 1 %; # output settability: 380 v - 420 v; # frequency: 47 hz - 53 hz; correction rate: 70 v/ sec; # aircooled servo stabilizer, three phase., heating mantle (single station) should have safety cut off with precise heating for boiling, evaporation, distillation or extraction process technial specification: flask capacity 250 ml, working temp range: ambiant + 5 to 350 degree celcius. accuracy: 1.0 degree celcius, display: led display with temperature, time; construction material: ms; power consumption : 150 w, semi automatic digestor for cod analysis with all assssories material of construction epoxy painted with chemical resistant coating; temperature range ambient to 450 deg c # stability of temperature 0.5 deg c # temperature calibration - automatic; selectable ramp: upto 4 per program; digestion time range: 1 to 999 minutes; time selection: 1 minutes steps; countdown: digital readout; heating places - 6 possition; size of tubes: 250 ml test tubes (42 mm); power 1000 w; number of programmable methods 20 numbers. # the thermal digestion unit should have high thermal homogeneity # the setup should have small footprint., digital thermometer with probe# mini lcd thermometer # type: digital, # sensor cable length: 1 meter water proof probe # batteries: 2 x batteries should be included, # temperature range: - 50 - 110 oc, # temperature measurement accuracy: 1 0c, micropippete stand#self-standing holder accommodates most major brands of pipettes. #material: pmma, # capacity: 5 pipptes/stand, conical flask draining rack#material: acrylonitrile-butadiene-styrene/polycarbonate, # no. of pegs: 20

CTN :40939734

05 Sep, 2025 NA

Allahabad - Uttar Pradesh

Tender For bid to ras bid to ras corrigendum : supply of deicer repair patch kit , deicer repair kit , resurfacing kit , polyurethane filler , grease z 21 214 , grease z 21 220 , anticorrosion grease paste molykote dx , grease aeroshell grease 17 nyco grease gn 17 aeroshell greas 64 , general purpose grease , grease mil g27617 , lubricating oil tectyl 900 brayco 300 royco 308 ca , sealing compound pr1422a2 , release agent z 24223 , gn47 thread compound , solid film lubricant , epoxy primer , polyurethane coating international black , dry film lubricant aeroshell turbine oil 308 eastman turbo oil 2389 turbonyco , corrosion inhibiting compound z11502 , pr1782c2 interface sealant , solvent cleaning compound z23149 , silicon sealant rtv889910 , anti corrosive compound z11906 , solvent dissolvent ams 3160 , anaerobic adhesive loctite 222 , anaerobic adhesive loctite 241 loctite 242 loctite 243 , anaerobic adhesive loctite 270 loctite 271 , anaerobic adhesive loctite 290 , anaerobic adhesive loctite 932 , gas and air leak detector , pr 1782a1 by 2 fuel tank sealant , pr1782b2 fuel tank sealant , integral fuel tank sealant pr1750b1 by 2 pr1750b2 pr1750b4 , lubricating oil brayco 460 turbonycoil 3516 , low adhesion sealant , silicon sealant white , silicon jointing compound , lock wire , anti corrosive compound z11909 , dry film lubricant molykote 3400 a , elastomeric adhesive , polyurethane sealant ) /bid number : gem/2025/b/6223529 * /dated: 03-07-2025 & & / bid document 1 / 40

CTN :41693629

18 Sep, 2025 NA

Bardhaman - West Bengal

Tender For supply of a set of material consist of: 1)batter [a set of material consist of: 1)battery terminal coating air tight water proof acid resistant waxy coating prevents sulfation and corrosion on battery terminals having excellent plasicity resist heat moisture weather vibrations in 700 ml of can.qty/set -01 no. 2) battery klens foam type battery terminal sulfation cleaner cum neutralizer incorporates unique acid indicator dye in 700 ml can. qty/set -01 no. make/brand: stanvac chemicals/superon schwesis technik/courium make only. ]

corporations/Associations/Others

CTN :41672354

23 Sep, 2025 NA

Multi City - Multi State

Tender For renovation and construction of shed and paver block work : - dismantling of old toilet block approx area 4 x6 sqm detail specification as per annexure a , clearing jungle of girth up to 50 cm measured at a height up to 3 m above ground level detail specification as per annexure a , earth work in excavation by mechanical means detail specification as per annexure a , demolishing brick work manually or by mechanical means detail specification as per annexure a , dismantling old plaster or skirting raking out joints and cleaning the surface for plaster at all height detail specification as per annexure a , removing and re fixing of m.s grill out side from middle wall to side wall including detail specification as per annexure a , providing and laying in position cement concrete of specified grade m 7 point 5 detail specification as per annexure a , 52 mm thick cc flooring with concrete hardener topping detail specification as per annexure a , p and f glass strips in joints of cement concrete floors detail specification as per annexure a , repairing of crack in flooring with help cement mortar with hardener and chemical detail specification as per annexure a , making plinth protection 50mm thick of cement concrete m1o detail specification as per annexure a , 15 mm cement plaster of mix 1 isto 4 cement coarse sand in wall and ceiling detail specification as per annexure a , repairing and maintenance of window with fabrication detail specification as per annexure a , repairing and maintenance of rolling shutter fabrication detail specification as per annexure a , repairing and maintenance of ms shutter fabrication of damaged work detail specification as per annexure a , renewing glass panes with putty and nails detail specification as per annexure a , clearing of roof by wire brush and joint of brick detail specification as per annexure a , providing and applying 20 mm thick water proof cement plaster detail specification as per annexure a , providing and laying in position specified grade of rcc m20 in foundation and up to plinth detail specification as per annexure a , providing and laying in position specified grade of rcc m20 in column detail specification as per annexure a , rcc work m20 in beams shelves chajjas lintels bands plain detail specification as per annexure a , centering and shuttering foundations footings bases of columns detail specification as per annexure a , centering and shuttering columns pillars piers abutments posts and struts detail specification as per annexure a , centering and shuttering lintels beams plinth beams girders detail specification as per annexure a , centering and shuttering suspended floors roofs landings balconies and access platform , steel reinforcement for rcc work including straightening cutting bending placing detail specification as per annexure a , brick work of class designation 7point5 in foundation and plinth cement mortar 1 isto 6 detail specification as per annexure a , brick work bricks of class designation 7point5 in superstructure above plinth level up to floor v cement mortar 1 isto 6 detail specification as per annexure a , half brick masonry bricks of class designation 7point5 in superstructure above plinth level up to floor v level cement mortar 1 isto 3 detail specification as per annexure a , structural steel work riveted bolted or welded in built up sections trusses and framed work detail specification as per annexure a , p and f precoated galvanised iron profile sheets zero point 5 mm total coated thickness with zinc coating 120 grams per sqm detail specification as per annexure a , 12 mm cement plaster of 1 isto 6 1 cement 6 coarse sand detail specification as per annexure a , 15 mm cement plaster of 1 isto 6 1 cement 6 coarse sand detail specification as per annexure a , cement plaster 1 isto 3 1 cement 3 coarse sand finished with a floating coat of neat cement detail specification as per annexure a , providing and laying integral cement based water proofing treatme

CTN :41675334

03 Oct, 2025 NA

Multi City - Multi State

Tender For supply of compound, cleaning (mil-c-25769) , conductive adhesive primer (ar) (cho-bond 1030) , primerless firewall sealant(ar) (ams3374) , thermal conductive silicone compound (cho-therm 1641) , self leveling green (ht3326-5-50) , adhesion promoter (ar) (pr-182) , silicone adhesive(ar) (rtv 3140) , sealing compound, low adhesive(ar) (ams3284 ty1clb-1/2) , adhesion promoter (pr-187) , conductive adhesive (ar) (pr-188) , conductive adhesive (ar) (pr-2200 a/b) , compound, sealing (mil- prf-81733 type ii class i grade a) , compound, sealing (ams 3265 b) , sealant, thread locking (astm d5363 an0231 p13) , compound jointing (ca1000) , epoxy resin (ar) (ea9309.3na) , epoxy resin (ar) (ea9359.3) , primer (ar) { ec 1945 (76381) } , sealing compound (torque stripe) , yellow (f-1000 sentry seal) , corrosion inhibitor (liquid) (ar) (fluid film liquid a) , corrosion preventive compound (fluid film nas) , leak test compound (leak-tec 372e) , thread lockers loctite (loctitie 242) , silicon sealant (mil- a-46146 rtv 3145) , paint, polyurethane (mil-c-46168) , alodine 600 (mil-c-5541) , lubricant, solid film (mil- l-23398) , epoxy, primer coating, green, type 2 ( mil- prf-23377 tycl2) , epoxy, primer coating, yellow, type 1 ( mil-prf-23377 type 1) , corrosion preventive compound (ar) (mil-prf-46010) , paint, gloss white (mil-prf-81352) , high solids polyurethane coating (mil-prf-85285# 35237) , high solids polyurethane coating (mil-prf-85285# 36081) , high solids polyurethane coating (mil-prf-85285# 36320) , high solids polyurethane coating (mil-prf-85285# 36495) , high solids polyurethane coating (mil-prf-85285# 37038) , coating, epoxy primer (mil-prf-85582) , primer, zinc chromate (tt-p-1757) , adhesive (ar) (v- 45) , corrosion inhibitor{ liquid ar (4e827) (fluid film ar) } , sealing compound (ar) (mil-r-81294)

corporations/Associations/Others

CTN :41601495

06 Sep, 2025 NA

Hyderabad-T - Telangana

Tender For providing of water in zonal office building walls and roof at proof coating serilingampally circle-20, slpz, ghmc

CTN :41641876

03 Sep, 2025 NA

Multi City - Chhattisgarh

Tender For supply of electrical and instrument items ( non authorized dealer) - pvc tape red, yellow, black,blue make - steelgrip for electrical, pvc board 4x7 make - havells/philips, pvc board 6x8 make - havells/philips, switch 6a make - anchor/rk lite/havells, socket 6a make - anchor/rk lite/havells, three pin plug top make - anchor/rk lite/havells , 5-15amp, pt bulb 60w, 230volt make - phillips/surya for electrical panded type, pt bulb 40w, 24volt make - phillips/surya for electrical, pt holder ceramic type make - havells/surya, aluminium tape (for electrical), water proof tape ( for electrical), cotton tape (for electrical), glass tape , ampire tape, painting brush o size for ele, painting brush 1/2" for electrical, painting brush 1" forelectrical, painting brush 4" for electrical, varnis make - doctor brand imersion (1 liter each), hylogen tube 500watt make - havells/philips , bajaj, hylogen holder 500watt make - havells/philips, room heater coil 1000watt make - anchor/havells, heater coil 1500watt make -anchor/havells , , araltide, rusotoline for electrical dept. each 1 leater, motor teruminal frame size- 90 (as per sample) make- abb, motor teruminal frame size- 100 (as per sample) make- abb, motor teruminal frame size- 112 (as per sample) make- abb, motor teruminal frame size- 132 (as per sample) make- abb, motor teruminal frame size- 160 (as per sample) make- abb, motor teruminal size- 2e2hxm280sm4 (as per sample) make- abb, trasformer oil make- power oil servo, g.i. nut bolt 6x25mm, g.i. nut bolt 6x50mm, g.i. nut bolt 8x35mm, g.i. nut bolt 8x65mm, g.i. nut bolt 12x65mm, mk-1 starter 6.5a make- l&t, mk-1 starter 10a make- l&t, mk-1 starter 16a make- l&t, mk-1 starter 32a make- l&t, motor 3.7kw, 5hp 1445 rpm frame size- 112 make-siemens flange type, capaciter 2.5mfd make- bajaj/philips, capaciter 4mfd make- bajaj/philips, capaciter 8 mfd make-bajaj/philips, exhaust fan 18", 220v single phase make- crompton/havells, cooler kit motor set 16", 220v single phase make- crompton/havells, tullu pump 0.05 hp for cooler make- crompton, celling fan 230 make-anchor/bajaj, pedastal fan 230v 250watt make- crompton/anchor, cable tai 300mm (for electrical), cable tai 150mm (for electrical), panel cooling fan model- rec- 220- 60tb2 vac-230, 50 hz 0.40a make- rexnord, hole cutter for panel cutting 25mm, tapariya, copper patty 10x40mm, crc seal loat (ht panel) red ureth one coating, aluminium lug 35mm ring type, aluminium lug 50mm ring type, aluminium lug 70mm ring type, aluminium lug 95mm ring type, aluminium lug 120mm ring type, aluminium lug 150mm ring type, aluminium lug 185mm ring type, aluminium lug 240mm ring type, aluminium lug 6mm ring type 6mm dia, aluminium lug 6mm ring type 8mm dia, aluminium lug 10mm ring type 8mm dia, aluminium lug 10mm ring type 6mm dia, aluminium lug 16mm ring type 8mm dia, aluminium lug 16mm ring type 10mm dia, aluminium lug 25mm ring type 10mm dia, aluminium lug 4mm ring type 6mm dia, aluminium lug 4mm ring type 8mm dia, copper lug pin type 10mm, copper lug pin type 16mm, copper lug pin type 25mm, copper lug ring type 6mm (as per sample), copper lug ring type 10mm (as per sample), copper lug ring type 16mm (as per sample), copper lug ring type 4mm (as per sample), igniter havels , c.g. , bajaj, engine oil 15w40 make- servo/total, fuel filter 750kva for sterling make dg set, oil filter 750kva for sterling make dg set, separ filter 750kva make- sterling, coolent alarm sensor for 750kva dg set, distilled water, coolent (5ltr. each), submersible motor 5hp 5stage with pump make-texmo/cri, bimetric claim 33kv transformer, motor 18.5kw, 25hp 735rpm size-hxt22 5smb4 make- abb foot mounting, motor 33kw, 45hp, 980rmp, make-cg size- nd225 foot mounting with blover set (cooling type), putty (pop), bentax oil type starter three fase 5 hp, bentax oil type starter three fase 7.5 hp, led type tube light fitting set 20watt,220v make - bajaj/philips, tester meke - tapariya 415v (for electrical yellow), screw driver

Central Government/Public Sector

CTN :41653714

23 Sep, 2025 NA

Ahmedabad - Gujarat

Tender For supply of rain jacket with integrated hood and trouser ( size- xxxl, xxl, xl, l )- ((coating material - pvc, material -polyester, jacket pocket - hanging cross pocket, trouser waist adjustable - full round elastic type, hood adjustable - tying cord with lock, extra cover on zipper - yes, wrist adjustable - strip with velcro, joints - all joints should be tapped from inside with heat seal, transparent on all stitched joints, hood available- yes , zipper jacket - yes, water proof ness at 60 cm water column - no leak, fabric thickness in mm - 0.10-0.20, list of following tests are to be carried out at irmra, thane / atira (ahmedabad) or any other nabl approved lab as per relevant is / specification on tender sample.( (1) tear strength (at wrap 1.5 kgf (min.) , at weft 1.5 kgf (min.)) (2) breaking strength (at wrap average 60 kgf ,at weft average 40 kgf) (3) weight of basic & coated fabric (4) resistance to heat (sample should pass the oven method of testing as per is 7016 (part - viii) / 1975) (5) water proofness (6) identification of fabrics). label - brand name label, size tag, wash care label, logo printing required as- special repair tpj with indian railway logo as per consignee instructions. all specification confirming to is:4761-1968, colour- navy blue, accepted brands are duckback, zeel, decathlon, acme target, clownfish, zacharias, wildcraft, and rexburg .

CTN :41641045

19 Sep, 2025 NA

Kharagpur - West Bengal

Tender For supply of single side coated glass cloth with special water proof coating on one side and adhesive on other side (as per annexure-a attached).

Polyurethane Coating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector