Latest polyurethane coating Tenders | Government polyurethane coating Tenders

CTN :43503893

19 Jan, 2026 NA

Gonda - Uttar Pradesh

Tender For supply of powder coating paint pure polyster ral-7035 matt

corporations/Associations/Others

CTN :43461971

13 Jan, 2026 3.03 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in garden of annual part i of sector 44 chandigarh under wdf - providing & fixing of push chair functions: developing the strength of upper limbs, chest and muscle groups of shoulder and back, improving the flexibility and stability of shoulder joints and elbows. good for healing the bending and stretching hindrances of shoulder joints and elbows, muscular atrophy, frozen shoulder, tennis elbows, etc.approaches sit down with your back against the equipment and take hold of the handgrips with both hands and push forward with effort till your arms extend straight. revert slowly.size:-2265x662x2010 mmmaterial: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, steel seats for long lasting life. the rate shall include fixing of gym equipment in cement concrete 1:2:4 block of size 5 x 5 complete in all respects to the entire satisfaction of engineer-in-charge., providing & fixing of sur board functions: by swinging both legs together from side to side the surfing board strengthens and develops the lower abdomen hips and thighs, improves balance and co-ordination through core activation approaches: stand on the pedals and grasp the handles with both hands, swing from left to right. size:-1020x800x1480 mmmaterial: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, steel footrest / foot paddle for long lasting life.the rate shall include fixing of gym equipment in cement concrete 1:2:4 block of size 5 x 5 complete in all respects to the entire satisfaction of engineer-in-charge., providing and fixing of space walker .space walker complete in all respects having following specifications.6. all pipes should used in the equipments should be galvanised with 3mm thickness.7. multi colour powder coating with polyster paints should be used on all the equipments.8. the foot pedal on all the equipments should be of aluminium only.9. the seats should be made of high quality plastic with colour scheme in yellow or orange.10. the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1100*460*1480mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-38*3mm steel pipe5 there is restrainer inside, swing lever is no.t more than 65degrees and having swing rod is made of 3mm steel tube.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts, the resistance index is greater than 0.5mm8 the distance between two pedals of the adjacent motion is no. less than 100mm.9 anti theft cover is made by stainless steel/high quality plastic10 the minimum height of the edge of swing component is no.t less than 80mm11 hazardous materials like coating agent, rubber are under national newest standard.12 radius of edge is no. less than 3.0 mm.13 the diameter of rotating shaft is no.t less than40mmfunctions: the leg & thigh exerciser provides excellent cardiovascular exercise while developing the leg muscles. allows a full range of movement in the hip joint improving flexibility and strength, without any impact or stress to joints and back. suitable for all ages. the rate shall include fixing of gym equipment in cement concrete 1:2:4 block of size 5 x 5 complete in all respects to the entire satisfaction of engineer-in-charge, providing and fixing of seated pedal trainer leg shaper complete in all respects having following specifications.6. all pipes should used in the equipments should be galvanised with 3mm thickness.7. multi colour powder coating with polyster paints should be used on all the equipments.8. the foot pedal on all the equipments should be of aluminium only.9. the seats should be made of high quality plastic with colour scheme in yellow or orange.10. the high en

corporations/Associations/Others

CTN :43480599

14 Jan, 2026 3.02 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym and pcc benches in parks near house no.2870/2 sector 49-d,chandigarh under mplads. work no.114 18th ls. - push chair odf 001functions: developing the strength of upper limbs, chest and muscle groups of shoulder and back, improving the flexibility and stability of shoulder joints and elbows. good for healing the bending and stretching hindrances of shoulder joints and elbows, muscular atrophy, frozen shoulder, tennis elbows, etc.approaches sit down with your back against the equipment and take hold of the handgrips with both hands and push forward with effort till your arms extend straight. revert slowly.size:-2265x662x2010 mm material: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, steel seats for long lasting lifeprovision for fixing of gym equipments in cement concrete 1:2:4 blocks of size 5 x5 x1 to the entire satisfaction of the engineer-in-charge, surf board by swinging both legs together from side to side the surfing board strengthens and develops the lower abdomen hips and thighs, improves balance and co-ordination through core activation approaches: stand on the pedals and grasp the handles with both hands, swing from left to right. size:-1020x800x1480 mmmaterial: pre galvanized mild steel, material thickness: 3 mm.paint: all weather double layer powder coated paint sealed ball bearing, streel footrest/foot paddle for long lasting life.provision for fixing of gym equipments in cement concrete 1:2:4 blocks of size 5 x5 x1 to the entire satisfaction of the engineer-in-charge, space walker .space walker complete in all respects having following specifications.all pipes should used in the equipments should be galvanised with 3mm thickness.multi colour powder coating with polyster paints should be used on all the equipments.the foot pedal on all the equipments should be of aluminium only.the seats should be made of high quality plastic with colour scheme in yellow or orange.the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1100*460*1480mm2 colour- customizable multi colour and complete powder coat3 size of main tube-114*3.75mm steel pipe4 size of supporting tube-38*3mm steel pipe5 there is restrainer inside, swing lever is not more than 65degrees and having swing rod is made of 3mm steel tube.6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater7 anti-skid components are used at the pedal parts, the resistance index is greater than 0.5mm8 the distance between two pedals of the adjacent motion is no less than 100mm.9 anti theft cover is made by stainless steel/high quality plastic10 the minimum height of the edge of swing component is not less than 80mm11 hazardous materials like coating agent, rubber are under national newest standard.12 radius of edge is no less than 3.0 mm.13 the diameter of rotating shaft is not less than40mmfunctions: the leg & thigh exerciser provides excellent cardiovascular exercise while developing the leg muscles. allows a full range of movement in the hip joint improving flexibility and strength, without any impact or stress to joints and back. suitable for all ages. approaches: hold the crossbeam with both hands and swing your legs backwards and forwards in a walking motion.provision for fixing of gym equipments in cement concrete 1:2:4 blocks of size 5 x5 x1 to the entire satisfaction of the engineer-in-charge, seated pedal trainer leg shaper complete in all respects having following specifications.all pipes should used in the equipments should be galvanised with 3mm thickness.multi colour powder coating with polyster paints should be used on all the equipments.the foot pedal on all the equipments should be of aluminium only.the seats should be made of high quality plastic with colour scheme in yellow or orange.the high end bearings such as skf/nbc must be used in all the equipments.1 dimensions- 1730

CTN :43225475

10 Jan, 2026 NA

Nilgiris - Tamil Nadu

Tender For bid to ras supply of supply of maintenance items d d -socket 20 mm , gi socket 25mm , gi socket 40mm , gi socket 50mm , gi socket reducing 15 mm x 20mm , gi socket reducing 15 mm x 25mm , gi socket reducing 15mm x 40mm , gi socket reducing 25 x 20 mm , gi socket reducing 20mm x 40mm , gi tee reducer 15mm x20mm , gi tee reducer 15mm x 25mm , gi tee reducer 15mm x 40mm , gi tee reducer 25mm x 20mm , gi tee reducer 20mm x 40mm , gi tee reducer 20mm x 50mm , gi tee reducer 25mm x 50mm , gi pipe med grade isi marked 25 mm bore , gi pipe med grade isi marked 40 mm bore , gi pipe med grade isi marked 50 mm bore , gi pipe med grade isi marked 100 mm bore , glass pane 4 feet x3 feet x 4 mm , glass pane 4 feet x 3 feet x 4mm , glass pane plain 4 feet x 3 feet x 5 mm , glass plain 4 feet x3 feet x 3 mm , glass plain 4 feet x4 feet x 4 mm , glass pane frosted 4 feet x 3 feet x 3 mm , glass pane frosted 4 feet x 3 feet x 4 mm , glass printed 4 feet x3 feet x 4 mm , convex mirror with ms pole 1000 mm and base plate , pvc water storage tank triple layer of 500 ltrs , pvc water storage tank triple layer of 1000 ltrs , cement white 1kg pack , foam cushion for sofa of size 22 inch x21 inch x 100 mm thick 40d , foam cushion for sofa of size 22 inch x21 inch x100 mm thick 40d , magic eye for door , looking mirror for table dressing gents of size 380x760x5mm , looking mirror for table dressing gents of size 750x330x5mm , looking mirror for table dressing ladies of size 1220x380x5mm , looking mirror for table dressing gents of size 1115 x 510 x 5mm , pre-laminated particle board 8 feet x4 feet x 8 mm , pre-laminated particle board 8 feet x4 feet x 12mm , pre-laminated particle board 8 feet x4 feet x 18mm , plywood bwr 6 feet x 3 feet x 12mm , plywood bwr 7 feet x 3 feet x 12mm , plywood bwr 8 feet x 4 feet x 4mm , plywood bwr 8 feet x 4 feet x 6mm , plywood bwr 8 feet x 4 feet x 12 mm , plywood bwr 8 feet x4 feet x19mm , plywood bwr 8 feet x4 feet x 19mm , plywood ostor teak wood veneer 8 feet x4 feet x4mm , plywood ost or teak wood veneer 8 feet x4 feet x6mm , tile guard paint , road marking paint yellow colour water proof thermoplast high quality coating as per is 164 , teak wood beading 18x4mm 10 inch long , teakwood beading 20 x 6mm 10 inch long , teakwood scantling first class hardwood 25mm x 25mm 2m long , teakwood scantling first class hardwood 50mm x 40mm 2m long , teakwood scantling first class hardwood 50mm x 25mm 2m long , teakwood scantling 100mm x 25mm x 2m long , teakwood scantling 100mm x 50mm x 2m long , teakwood scantling 100mm x 75mm x 2m long , teakwood scantling 50mm x 50mm x 2m long , teakwood scantling 75mm x 40mm x 2m long , wood stainer rosewood colour 100 ml bottle , raw sienna powder rosewood colour in 400 gms , raw sienna powder teakwood colour in 400 gms , raw sienna powder yellow colour in 400 gms , stp roll 4 inch x 10 mtr long , tank lid cover standard size , stainless steel coat hook standard size , magnetic catcher , driver for street light 10 w , driver for street light 24 w , driver for street light 63 w , fully automatic star delta starter suitable for 3 phase 25 hp pump set , pvc tape insulation 15 mm x 9 yard , pvc tape insulation 20 mm x 9 yard , insulation tape 20mm x 25 mtr , indicating lamp for geyseraluminium curtain bracket 25mm powder coated, ss door handle 75 mm, ss door handle 100 mm, aluminium bow handle 75mm, aluminium bow handle 100mm, ss telephonic channel 600 mm, aluminium bow handle 125mm, aluminium bow handle 150mm, ms bow handle 150 mm, ci bracket for wash hand basin of size 500 mm long 5 mm thick, ci bracket for kitchen sink of //bid details2 / 128

CTN :42685704

09 Jan, 2026 55.79 Lacs

Nawanshahr - Punjab

Tender For bid to ras bid to ras supply of furniture items c c--laboratory table with boxes , steel almirah , steel almirah small , computer table , computer and printer table , office table executive table , lecture stand , revolving chair small , three seat sofa , drawing stool laboratory table with boxes:laboratory table with boxes : table size: 2400 mm length x1200 mm width x 800 mm height (+/- 10 mm) frame: 48 mm square ms pipe and 1. 2 mm thickness. storage boxes: two storage boxes with doors and standard locks made up of 0. 8 mm crca sheet (+/- 0. 1 mm), top: top made of water proof ply board of thickness 25 mm pasted with 0. 8 mm thick sun mica, handle: plastic concealed handle of black colour. edges: edges cover with 2 mm thick hot glue pvc lipping pasted with cnc machine, colour: top mica chocolate brown, frame legs brown and storage boxes of cream colour. coating: powder coating range 50-55 microns. , steel almirah:size:- height-1981mm, width-916 mm, depth 486mm,construction: - the almirah should have welded type construction. the thickness of back panel should be 0. 8 mm, other components the thickness should be 0. 9mm and the shelf thickness should be 1. 2 mm doors & handles: - the almirah should have full height steel hinged door & should be provided with handle. locking: - the almirah should be provided with 3 way locking mechanism & shooting bolt arrangement. shelves & load bearing capacity: - the almirah should have height wise adjustable shelf mounting and uniformly distributed load capacity per each full shelf should be 80 kg and shelves should be 4 in number and should be fully adjustable. powder coating process: - all the metal parts shall be given antirust surface treatment & and shall be powder coated with epoxy polyester powder. it shall involves an 8 step treatment. final ) /bid number: gem/2025/b/6865848 * /dated: 10-11-2025 & & / bid document1 / 25finish shall consists of poxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns. the testing of paint shall be done for various physical & chemical properties as per is: 101. the material shall then be oven baked with a controlled temperature of 1800c to 2000c. manufacturer/ supplier must have iso- 9001, 14001, bifma & ohsas certifications. certificates should be attached. leveler:-it should have leveler with m10 screw type leveler with hexagonal plastic base. , steel almirah small :size:- height 1270 mm, width 765mm, depth 440 mm construction: - the almirah should have welded type construction. the thickness of back panel should be 0. 8 mm, other components the thickness should be 0. 9mm and the shelf thickness should be 1. 2 mm doors & handles: - the almirah should be provided with full height steel hinged door & should have handle. locking: the almirah should have 3 way locking mechanism with shooting bolt arrangement. shelves & load bearing capacity: - the almirah should have height wise adjustable shelf mounting and uniformly distributed load capacity per each full shelf should be 80 kg maximum and shelves should be 3 in number and should be fully adjustable shelves. powder coating process: - all the metal parts shall be given antirust surface treatment & and shall be powder coated with epoxy polyester powder. it shall involves an 8 step treatment. final finish shall consists of poxy polyester powder coating of approved color & shade with a dry film thickness of minimum 40 microns. the testing of paint shall be done for various physical & chemical properties as per is: 101. the material shall then be oven baked with a controlled temperature of 1800c to 2000c. manufacturer / supplier must have iso- 9001, 14001, bifma & ohsas certifications. certificates should be attached leveler:- it should have leveler with m10 screw type leveler with hex plastic base, computer table :computer table should have dimensions (mm) 900 x 750 d x 730 with +- 10mm tolera

State Government

CTN :43425247

21 Jan, 2026 25.00 Lacs

Bikaner - Rajasthan

Tender For nib for procurement of library furniture at mgsu - nib for procurement of library furnitures at mgsu, books racks(main unit)size 7 6 hx3 wx22 d steel double-faced stacks one main unit 20gaze having 14 shelves total(each face 7 shelves)sides, pillar shelves, and side rest made out of 20 gauge m.s. sheet. shoes of the stacks are made out of 16 gauge m.s. sheet. the main unit is provided with a range indicator and label holder. with powder coating color which we want., books racks(add on unit)size 7 6 hx3 wx22 d having 14 shelves total (each face 7 shelves) sides, pillar shelves, and side rest made out of 20 gauge m.s. sheet. shoes of the stacks are made out of 16 gauge m.s. sheet. with powder coating color which we want, exhibition standsize 63 x20 frame,30 x5 pocket 4 on each side, with 2 slanting shelves for display of boards. powder coated. o, exhibition standpowder coated, 20 pocket in all, 10 pockets 12" long and 10 pockets 18" long for display of approx. 50 books. total stand 68" hight., simple newspaper almirasize 15"x36"x98"angle guage 18shelf guage - 22, library student chairsseating height 18"seat size 18"x18"both sides cloth cover with comfortable, visitors chairsstillness stell with five sitters (1.75-1.80 meters in length, 68-79 cm in width and 77.79 cm in height. for instance one moder is 1750mm long. 680mm wide and 780 mm high. while another is 177.8 cm long 66cm wide and 78.7 cm high), student scholar carrels 32"x30"x24" wxhxdupper height 1.5", aluminium alloy frame, alluminium frame+psnrl/glass/fabric/steel board, h shape and including computer keyboard, four glass book case66 x 33 x 12, with 4 lock system with 20/22 gaze, wooden periodical display rakes with 25-compartmentsize 75" hx57" wx16"d wooden with 25 compartments, book supporterpowder coated iron, size- 7"x5", weight 300 gram

Central Government / Public Sector

CTN :43466683

09 Jan, 2026 NA

Tirupati - Andhra Pradesh

Tender For supply and application of powder coating

CTN :43435681

17 Jan, 2026 NA

Panchkula - Haryana

Tender For supply of radiology consumablees d d -coiling and flow divertor placement with 0point072 upto 30 cm long like navien , soft tip braided neurovascular guide catheter with hydrophilic coating from distal tip to 15 cm 6 fr 80 90 cm long , needle chiba with tip designed for high visibility on ultrasound echotip 22 g 20cm , catheter diagnostic angiography hydrophlic coating braided construction simmons sidewinder1 4obq5f 100cm , microcatheter braided two tip marker steam shapeable tip distal tip of at least 2point1 f suitable for neurointervention having inner diameter of at least 0point027 inch , y connector with double rotating adapter and touhy brost valves with symmetrical y limbs , evoh co polymer opacified for embolisation onyx concentration to be specuified at time of purchase , histoacryl glue n butyl cyanoacrylate , drug eluting beads for chemoembolization , ultrasound probe cover , stiff hydrophilic coating guide wires suitable for negotiating tortuous vascullar anatomy with j curve tip of 0point035 inch diameter and 260 cm length , kampi angiography catheter 40 65 cm length 4obq5 fr permitting 0point035 inch guide wire , microcatheter length 110 130cm od distal 2point7 fr and proximal 2point9 fr for peripheral interventional with tungstern coil in the wall , radiofrequency ablation probes assorted , transjugular liver access set for tipss , bare platinum mechanically dechachment soft coil with od of 0point0115 3 to 6 mm in variable lengths of helix shape like axium prime , hydrosoft detachable coils for intracranial aneurysm embolisation hydrogel coated assorted sizes , microfabricated nitinol hypotube design synchro guide wire 0point010 diam 200 cm length , flow diverter with at least 48 72 nitinol strands with balanced porosity and mesh density for use in uncoilable and giant aneurysm , bone biopsy needle 14g , disposable c arm cover , balloon angioplasty cathter 0point014 inch guidewire compatible over the wire design 60 or 80 cm shaft to 6 mm length 20 to 100mm , detachable platinum coils 0point014 inch complex framing for intracranial aneurysm therapy coil diameter 1 mm to 25 mm coil length 1 to 50 cm , pressure injector 200 ml with connecting tubing compatible with nemoto ct pressure injector , vertible hydro philic angiography glide catheter m coat like terumo permitting 0point035 guide wire atleast 100 120 cm long 5 6f , thermal printer paper usg type 5 , self expanding vascular stent graft assorted dia x 4 10 cm 9f sheath compatible like fluency , back table cover large reinforced 152x228cm sterile , disposable primary angiography kit consisting of bowl 250 ml rectangular sponge bowl 1000ml surgeon gown kidney tray 700ml , accustick introducer system for non vascular procedures , non tapered carotid wall stent closed cell design resheathable 6 10mm dia assorted length , radial and femoral angiohraphy drape 149point5 x 94 inch 380cmsx240cms with dual windows bis and equivalent sterile , sterile powder free latex micro surgical gloves isoobqenobqastm certified viral resistance tested light brown size 7point0 , hydrophilic with m coat or eqiupvalent agiography glide catheter with less lubricity on proxilmal shaft cobral c1 5fr 65 cm permitting 0point038 inch wire , pva particle dry in ampoules particle size to be specified at the time of purchase , ring biliary duct catheter 8 to 9 f sizes specified by user kink resistant with large side holes and simple and stable locking mechanism metal and plastic stiffner , indigo cat 8 kit include indigo cat 8 catheter max aspiration tubing max cannister //bid details2 / 42

CTN :43439139

14 Jan, 2026 8.62 Lacs

Nagpur - Maharashtra

Tender For supply of air cooler ducting system d d - gi duct work 24 gauge 0. 60mm sheet with installation , air cooler with 1800 cmh 1. 1kw motor , air grill aluminium powder coating , cooler stand and 1000 litres water tank with hanging installation , insulation of aluminium acoustic 9mm xlpe , canvas connection , civil work , plumbing work

CTN :43275641

13 Jan, 2026 NA

Noida - Uttar Pradesh

Tender For corrigendum : supply of item a. 1 of mr - supply of gi pipes with powder coating of size, schedule and specifications as indicated in mr part 1 , item a. 1 of mr - supply of gi pipes with powder coating of size, schedule and specifications as indicated in mr part 2 , item a. 1 of mr - supply of gi pipes with powder coating of size, schedule and specifications as indicated in mr part 3 , item a. 1 of mr - supply of gi pipes with powder coating of size, schedule and specifications as indicated in mr part 4 , item a. 1. 1 of mr - inland transportation upto delivery location and other costs incidental to delivery of goods for item code a. 1 of mr

Polyurethane Coating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

State Government

Central Government / Public Sector