Get complete information related to latest Portable Visualiser Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Portable Visualiser Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Portable Visualiser Tenders.
Tender For supply of various electric items as per detailed specification given as under jurisdiction of phed division jhalawar. - relay 5 amp to 32 amp , magnet coil, , single phase preventer, , thermal overload relay 21-30 amp, , thermal overload relay 15-20 amp, , timer, , panel contractor set, , mcb 63 amp., , kit kit fuse 63 amp, , kit kit fuse 100 amp, , amp mtr 0-50 amp, , volt mtr 0-500 volt, , auto switch 3 phase, , ms flange 80 mm, , ms flange 100 mm, , ms flange 150 mm, , aluminium lugs 3 x 16 sqmm, , aluminium lugs 3 x 35 sqmm, , aluminium lugs 3 x 50 sqmm
Tender For procurement and installation of items for sailor institute(a) procurement and installation of double faced overlay of interlocking mezzanine with all associated fitments and accessories at sailor's bar (b) supply and installation of live entertainment interaction panel unit at sailor's bar (c) provisioning of pine wood channelled support with sound dampener louvers and humidity dampener controller boards for sailor lounge area (d) supply and installation of digital sound amplifying projector system with associated accessories and fitments (e) fabrication of sinages neon board with illuminated customised theme at sailor's bar (f) heavy duty versatile ceiling mount with cable management and necessary hardware (g) air ciculator with flow motion controller with associated accessories and fitments (h) high rise revolving low empress back rest supporter with leg extender and accessories (i) eco friendly matte finish overlay with colour portray (j) fabrication of see thru view cutter with all associated fitments and accessories (k) fabrication of wall cladding with mural refractory clay pannels at sailor's bar (l) multi partition display cupboard with illumination size 72"x48"x18" excutive premium leatherette comforter with deeply cushioned tapered back and padded lounger armrests (m) excutive premium leatherette comforter with deeply cushioned tapered back and padded lounger armrests (n) fabrication of customized bar table with associated accessories and fitments (o) portable moisture control absorbent device with programmable timer portable moisture control absorbent device with programmable timer (p) vertical suspended blind with accessories.
Tender For corrigendum : provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate nu
Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - supplying , installation, testing and commissioning of vertical turbine pump set with ss impeller capable to discharge 126 m3/hr.against total head of 50 m, (make kirloskar/jyoti/wilo-mather&platt/wpil) coupled with suitable capacity vertical hollow shaft/solid shaft squirrel cage induction motor , rating of motor 20% more bhp than that of pump (make kirloskar /abb /cgl/ siemens) operated on 415 +/- 10% volt, 3 phase , 50 c/s a.c supply , ie3 type as per is:325 and iec:63400-ihaving speed 1450 rpm,with heavy duty m.s. column assembly with ss line shaft and each coloumn of 5 feet length including cost of supplying , fitting and fixing of all required accessories such as cidf sluice valve-1 set, cidf nr valve-1 set, pressure gauge-1 no, strainer-1 no, m.s. channel base plate etc. all complete including cost of taken out existing old pumpset., supplying and installation of fasd starter suitable for above mentioned vt pumpset make lk/bch/schneider., supplying and laying of 25 mm2 , 1.1 kv, 3 core pvc insulated unarmoured copper cable make polycab/kei/gloster, from starter to motor., supplying, installation testing and commissioning of horizontal split casing centrifugal pump set with bronze impeller having discharge 126 m3/hr. against total head of 35 m, (make - kirloskar/jyoti/wilo-mather&platt/wpil), coupled with suitable capacity squirrel cage induction motor, rating of motor 20% more bhp than that of pump(make kirloskar /abb /cgl/ siemens) ,tefc, ie3 type as per is:325 and iec:63400-ihaving speed 1450 rpm,operated on 415 +/- 10% volt, 3 phase , 50 c/s a.c supply, mounted on a commonm.s. base plate including cost of supplying , fitting and fixing of all required accessories such as cidf sluice valve-1 set, cidf nr valve-1 set, pressure gauge-1 no, foot valve-1no, etc. all complete including cost of taken out existing old pumpset., supplying and installation of fasd starter suitable for above mentioned c/f pumpset make lk/bch/schneider., supplying and laying of 16 mm2 , 1.1 kv, 3 core pvc insulated unarmoured copper cable make polycab/kei/gloster, from starter to motor., cost towards complete repairing of control panel at intake well with changing of damaged parts such as :-1.150 amp tpn mccb,50 ka -1 no. as incoming feeder.2. 75 amp tp mccb, 50 ka-2no as outgoing feeder.3.star delta timer-2nos(one for each starter) 4. 32 amp switch fuse unit -01 no. for internal and external light load.5. (0-500 v) volt meter-01 no., ampere meter-01 no.,three phase indicator lamp,powder coating paint,push button on/off,on/off/trip indicator lamp,wiring,etc as per required and testing on full load ., cost towards providing all labour, tools and technicians for taken out and dismantling 40 hp vt p/set with bowl assembly, 6" dia. coloumn pipe and line shaft etc all complete., cost towards dismantling and repairing of complete bowl assembly., cost towards making supplying and fitting s.s. top shaft as per size and sample., cost towards making supplying and fitting of c.i. spider bearing having od 6.5" with rubber bush as per size and sample., cost towards lowering of vt p/set. after complete repairing and assembling works., cost towards complete repairing of control panel at clear water pump house with changing of damaged parts such as :-1.125 amp tpn mccb,50 ka -1 no. as incoming feeder.2. 63 amp tp mccb, 50 ka-2no as outgoing feeder.3.star delta timer-2nos(one for each starter) 4. 32 amp switch fuse unit -01 no. for internal and external light load.5. (0-500 v) volt meter-01 no., ampere meter-01 no.,three phase indicator lamp,powder coating paint,push button on/off,on/off/trip indicator lamp,wiring,etc as per required and testing on full load .
Tender For providing and fixing of contractor block and other electric components at various t wells in sector 5 panchkula - 24.5.1.6:- miscellaneous items 1.6. supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 16 sqmm [through rate], 20.114.9:- supplying erection, testing of fully automatic electric control panel board for t/wells in pump chamber consisting of ms sheet of thickness 14 gauge duly painted box type floor mounted made of angle frame containing 1 no. fully automatic air brake starter suitable for motor of the following capacity, min switch of suitable range with hrc fuse, 1 no. volt meter (0 to 500 volts), 1 no. amp. meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in electric control panel board complete in all respect as per specification given in schedule no. ii, including mcb, suitable, capacitor, wooden box etc as per site requirement complete in all respect. 9. 50 hp motor [through rate], 20.10.3 :- extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 3. 150 mm i/d [through rate], 20.11.3 :- providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 3. 150 mm i/d [through rate], 20.84:- providing and fixing of insulated rubber matting suitable for 11 kv installation 1 m x 2 m x 12 mm thick (is code 15652-40091) as per specification complete and as per directions of engineer-in-charge [through rate], ns item:- providing and fixing of contractor block mnx 80 landt make as per satisfaction of engineer-in-charge and attesting on load, ns item:- hiring of electronic borewell camera for videography 350 deep borewell urgently required for internal photography complete in all respect to the entiresatisfaction of engineer-in-charge, ns item:- measurement of discharge at tubewell of 1 hr after opening of upper bend with help of discharge flow meter including dismantling and reassembling of tee bend with help of chain block labour tool and plantcomplete in all respect (note any damage to site and material is responsibilityof the contractor)
Tender For corrigendum : annual tender for 2026-27 street light material supply in achirapakkam town panchayat - 40 watts fl tube light, 40wattsvpitcopperchoke, 40watts starter, side holder, street light aluminium fittingwithchokes,bulb& starter, 1*40 street light accessories, 1*40 w street light fitting cover, 1*40w sideholderbase, 20 wled 4feet tube light fittings, 24 w led 4feet tube light fittings, 28 w led 4feet tube light fittings, 30 w led 4feet tube light fittings, 36 w led 4feet tube light fittings, 40 w led 4feet tube light fittings, insulationtaperoll, 7/16 pvc insulated copper wire, 7/20 pvc insulated copper wire, 3/20 pvc insulated copper wire, 1/18 pvc insulated copper wire, 25 sqare mm 3 ½ “ ug cable, 50 sqare mm 3 ½ “ ug cable, hook up wire (patty wire), 2 core service wirw, 1/18 aluminum wire, 3/20 aluminium wire, 7/20 aluminium wire, 7/18 aluminium wire, 7/20 gi wire (service wire), 16 amps fuse unit, 32 amps fuse unit, 63 amps fuse unit, 100 amps fuse unit, 200 amps fuse unit, 500 amps fuse unit, "16amps dp switch with metal clad(fronthandle)", "32amps dp switch with metal clad(fronthandle)", "16amps dp switch with metal clad(sidehandle)", "32amps dp switch with metal clad(sidehandle)", "100amps tpn switch with hrc fusessheet steel double break", "125amps tpn switch with hrc fusessheet steel double break", "200amps tpn switch with hrc fusessheet steel double break", "315amps tpn switch with hrc fusessheet steel double break", "400amps tpn switch with hrc fusessheet steel double break", "16amps tpn metal clad swtich with re-wirable fuse units", "32amps tpn metal clad swtich with re-wirable fuse units", "63amps tpn metal clad swtich with re-wirable fuse units", "100amps tpn metal clad swtich with re-wirable fuse units", "200amps tpn metal clad swtich with re-wirable fuse units", procelain holder, peengan holder gls holder, "5000 w street light automatic on/offswitch iso:9000 – 1 set.", timer auto set, 1” pvc wiring pipe, 1”pvc wiring bend, 32mm service pipe set, 40w tl fitting street light clamp set, cable tag, e.b.rccpoleclampsetwithbolts&nuts1set, bi-metalicclamp3/20, bi –metalicclamp7/20, chokescrew, dbswitch, 25 ams bch contact set, eb service g.i box, g.i switch box (service box ), wooden plank for meter board, wooden plank for ariel board, 3/4” g.i bended pipe (suitable for led fitting), 1” g.i bended pipe for (suitable for led fitting), 1 ¼” g.i bended pipe (suitable for led fitting), 2.5 sq.mm 3 core copper flat cable, 4 sq.mm 3 core copper flat cable, 6 sq.mm 3 core copper flat cable, 10 sq.mm 3 core copper flat cable, 16 sq.mm 3 core copper flat cable, 20 w led street light fittings, 25 w led street light fittings, 30 w led street light fittings, 40 w led street light fittings, 45 w led street light fittings, 48w led street light fittings, 60 w led street light fittings, 70 w led street light fittings, 72 w led street light fittings, 80w led street light fittings, 120 w led street light fittings, 150 w led street light fittings, "70 w led street light fittings withdimmable driver", "72 w led street light fittings withdimmable driver", "90 w led street light fittings withdimmable driver", 120 w led street light fittings with dimmable driver, 150 w led street light fittings with dimmable driver, 100 w led flood light with dimmable driver, 120 w led flood light with dimmable driver, 150 w led flood light with dimm11864able driver, 200 w led flood light with dimmable driver, 100w led flood light with integrated driver, 120w led flood light with integrated driver, 150w led flood light with integrated driver, 100w led high bay lights fitting, 150w led high bay lights fitting, 200w led high bay lights fitting, "120w : 6500k : led ip65 : solar streetlight fitting", "40w : 12.8v : ip65 havells street lightfitting", "40w : 6500k , 10000mah : 10w panel :ip66 sensor type", "60w : 6500k , 15000mah : 15w panel :ip66 sensor type", "100w : 6500k , 20000mah : 18w panel :ip66 sensor type", 25 w led driver, 25 w mcpo cp w
Tender For corrigendum : repair and maintenance of tube wells and boosters including repair of water level gauge, ms panel, sluice valves and allied items of civil / electrical at various buildings i.e. punjab raj bhawan, haryana raj bhawan & residence sector-7, under maintennace booth, sector-7, chandigarh. (ch to: 2216 (np) mtc. and repair ) - repair of ci sluice valve up to 150 mm dia including dismantling, repair / replacement of spindle, nut , rubber packing, nuts and bolts complete., up to 100 mm dia, lifting and lowering of submersible pump set including dismantling of flenged joints, taking out column pipes, re-jointing etc including replacement of defective packing, nuts and bolts etc complete, tube well, booster, supplying and fixing of single phase preventor make minilec or equivalent model of approved make to the satisfaction of eic , supplying and fixing of current transformer ( ct ) for ampere meter of suitable rating complete., supplying and fixing of overload relay of following capacities, 14 to 23 amp, 30 to 42 amp, 45 to 75 amp, providing and fixing of star delta starter timer of make l&t or equivalent model of approved make to the satisfaction of eic, providing and fixing of kit kat 500 amp complete in all respect, supplying and fixing of capacitor of 20 to 50 mfd make l&t, siemens or equivalent model of approved make to the satisfaction of eic , supplying and fixing of analog meter of make l&t ( rishabh ) or equivalent model of approved make to the satisfaction of eic , volt meter, ampere meter, supplying and fixing of 3 pole mccb of following capacity of make l&t, bch, havells or equivalent model of approved make to the satisfaction of eic , 100 amp, supplying & fixing of contactors block of make l&t, bch or equivalent model of approved make to the satisfaction of eic , mnx - 25, mnx - 32, mnx - 50, mnx - 70, supplying and lowering of submersible cable 16mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , supplying and lowering of submersible cable 25mm2 of make havells, finolex, l&t or equivalent model of approved make to the satisfaction of eic , providing and fixing hydro pneumatic pump of size 0.5 hp of approved make with 24 ltr capacity tank, pressure switch, pressure gauge, nrv accessories and making connections complete of make crompton or equivalent model of approved make to the satisfaction of eic, repair and rewinding of submersible pump set including carriage from installation to workshop and back. the rate include replacement of all defective parts of pump and motor rewinding., 5 hp, 7.5 to 10 hp, 35 hp to 55 hp, repair and rewinding of monoblock submersible pumping set including repacement of defective parts as required and carriage from installation to workshop and back., 0.5 h.p, 1 h.p, 2 h.p, manufacturing, supplying and fixing of ms control panel 16 gauge of size 600x700mm with door including wiring of inside panel, complete in all respect, providing and fixing of self pumping monoblock single phase pump for boosting of make crompton or equivalent model of approved make to the satisfaction of eic, 0.5 h.p, 1 h.p, 2 h.p, providing and fixing of pressure gauge make h-guru or equivalent model of approved make to the satisfaction of eic, providing and fixing of elcb 63 amp make l&t/havells or equivalent model of approved make to the satisfaction of eic, repair of internal control wiring 1.5mm wire with thimbles, nut bolt etc. complete