Latest powder coating Tenders | Government powder coating Tenders

State Government

CTN :43139241

01 Jan, 2026 11.68 Lacs

Delhi - Delhi

Tender For tender for supply of providing and fixing stainless steel (grade s 304) sheet cutouts with the light facing towards the background and foreground in dark embossed letter to be fitted on main stone signage present on press enclave road. , providing and fixing qutab golf course signage at main entrance gate made up of acp sheet fitted on mild steel frame , embossed acrylic back lit letters. frame will be fix on ms triangular truss steel pillar side pillers embedded into the ground for atleast 4 feet and fixed with concreting. ms triangular truss steel pillar frame having atleast 15 ft clear height from ground and signage having top face size of approx 22 feet wide and 3 feet high , and 1.5 feet x 4 feet approx on both the sides. , providing and fixing qutab golf course signage at main entry of clubhouse building having size approximately 15 feet x 2.0 feet made up of acp sheet on ms frame back lit embossed acrylic letters all complete with necessary acp sheet on ms frame back lit embossed acrylic letters all complete with necessary fittings. , providing and fixing driving range signage board of size approx 21 feet x 1.5 feet made up of acp sheet on ms frame back lit embossed acrylic letters all complete with necessary fittings. , providing and fixing qutab golf driving range signage on side wall of new club house building on ramp towards golf driving range made up of acp sheet on m.s. frame with back lit embossed acrylic letter. , providing and fixing 3 inch ms pipe with powder coating acp sheet with acrylic letters backlit with leds installed on rcc base and fixed at site with all connections and completing & installation all complete as per the directions of engineer in charge.

State Government

CTN :43061677

17 Dec, 2025 NA

Delhi - Delhi

Tender For corrigendum : strengthening of (e/m) equipments of various tube wells installed at babu park kotla area under kasturba nagar constituency ac-42 . - s/o double flanged g.i pipe of 50 mm dia. medium class each of 3 mtrs long duly threaded on both ends welded and fitted with g.i flange on both ends having the slot for sub cable.make: - tata/jindal, supply of out door type 7.5 to 10hp hut type electrical feeder pillar/metal board of welded construction of size 1370mm x 760mm x 460mmfabricated with 16 swg m.s. sheet with horizontal and vertical intermediate chamber of suitable size onsuitable size insulating board to make the panel robust, having double door with 14 swg s.s hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, vermin proof having following items.1. mccb 63 amp, 4 pole-1 no2. rccb/elcb 63 amp, 4 pole with earth fault indicator and positive contact indication protecting a circuit automatically 1no3. fully automatic star delta starter of 10hp, 3phase oil immersed type 1no4. digital ampere meter 96mmx96mm square shape of 0-30 amp range 1no5. digital voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1no6. led indicating lamps with fitting (a set of 3 lamps) 1set7. shunt capacitor of 5 kvar with three phase isolator 1no8. motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection. 1no9. programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa) up to 10 h.p.1no10. complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc.as required. the panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame.make:-all the insert used in panel must be of djb approved makes and should be isi marked where make of that equipment is not approved.djb item code 10.2.1, supply of pvc insulated pvc sheathed copper conductor flat cable size 3 core x 4sq mm,1100 volts, confirming to is 694(each roll 100mtr long) make: finolex / havells./kei/any djb approved make., s/o nut bolts,washer dia 1 long full threaded, s/o rubber packing 50 mm dia. flange., lowering and lifting of sub/sets from bore by taking out double flanged gi pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gi pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material (rubber packing and nuts bolts) will be arranged by the firm as per site requirement. the other material required during execution will be provided by department.

CTN :43065620

15 Dec, 2025 30.00 Lacs

Bikaner - Rajasthan

Tender For various types of furniture materials - table 3 x 6 1. size:3 feet (width) 6 feet (length) 2.5 feet (height) approximate.2. material:frame and legs made of seasoned teak wood (moisture content 10%).tabletop made of 18 25 mm thick isi-marked commercial board / plywood, of approved quality.all wooden parts shall be termite-proof and kiln-seasoned.3. top finish:top covered with 1 mm thick laminate (matte / glossy) of approved shade and brand.all edges sealed with 2 mm pvc edge banding or polished teak beading.surface to be smooth, scratch-resistant, and heat-resistant.4. drawers & box unit:three lockable drawers on one side, mounted on telescopic channels for smooth sliding.one storage box / cupboard with hinged door and locking arrangement on the other side.all drawers and box interiors finished with melamine or laminate.5. legs & frame:made from solid teak wood sections (minimum 2 2 ), joined with proper mortise and tenon joints.cross supports / bracing provided for additional rigidity and strength.6. hardware:branded locks, handles, channels, and hinges (e.g., godrej / hettich / ebco or equivalent).high-quality adhesive and screws used for assembly.7. polish / color:melamine / pu polish in natural teak, walnut, or as approved by the department.uniform finish without marks or uneven coating.8. quality requirements:table must be sturdy, termite-resistant, moisture-protected, and wobble-free.workmanship should be neat and conform to standard office furniture design.minimum load-bearing capacity: 75 kg distributed load on tabletop.9. warranty:minimum one-year warranty against manufacturing or structural defects., table 4 x 6 1. size:4 feet (width) 6 feet (length) 2.5 feet (height) approximately.2. material:frame & legs: made of first-class seasoned teak wood, moisture content not exceeding 10%.top: 25 mm thick isi-marked commercial board / plywood of approved brand and grade.drawer & box components: 18 mm commercial board with teak wood beading on exposed edges.all materials must be termite-proof, moisture-resistant, and well-seasoned.3. top finish:tabletop finished with 1 mm thick premium laminate (matte or glossy) of approved shade and brand (e.g., greenlam, century, merino).edges: 2 mm pvc edge banding or solid teak beading, finely polished.surface should be smooth, scratch-resistant, and heat-resistant.4. drawers and storage box:three lockable drawers on one side with telescopic channels for smooth movement.one storage box / cupboard with hinged door and individual lock on the same side.all drawers to have soft-closing mechanism and branded locks/handles (godrej / hettich / ebco or equivalent).inner surface of drawers and box to be laminated / melamine-coated for a clean finish.5. frame and support:legs of solid teak wood (2" 2" or heavier section) with cross bracing for strength.all joints properly mortised and tenoned, fixed with wood adhesive and screws for rigidity.table should be wobble-free and stable.6. polish / color:pu or melamine polish of natural teak / walnut / oak shade (as approved).finish to be uniform, smooth, and glossy.7. hardware & accessories:all fittings (locks, hinges, channels, handles) to be branded and rust-proof.cable hole with grommet on top for wiring management.8. quality & strength:structure must be durable, termite-resistant, and long-lasting.tabletop load-bearing capacity minimum 100 kg (uniform load).corners rounded for safety and aesthetics.9. warranty:minimum one-year comprehensive warranty against any manufacturing or structural defect., computer table1. size:approx. 1200 mm (l) 600 mm (w) 750 mm (h)(4 feet 2 feet 2.5 feet)2. material:top: 18 25 mm thick pre-laminated particle board / mdf board / plywood, isi-marked, of approved brand (e.g., century, greenply, action tesa).frame / legs: mild steel (ms) tubular frame (25 mm 25 mm 1.2 mm thick) with powder coating, or solid wood frame as specified.keyboard & cpu units: same material as tabletop (laminated board).3. c

CTN :43102526

18 Dec, 2025 2.38 Lacs

Jaipur - Rajasthan

Tender For ward no. 21 in vidhadhar nagar in patak pachhad hanuman park sector 2 in installing open gym work - cross trainerproviding and fixing of cross trainer of size not less than 1140mm (length) x 625mm (width) x 1750mm. (height), to enhance the mobility of upper and lower limbs and improve the flexibility of joints. the main structure frame shall be made from g.i. pipe minimum of 80nb c class welded with m.s. round base plate at least 250 mm & 10mm thick. the handle frame shall be made up of at least 25nb c class g.i. pipe. the footrests shall be made from lldpe/aluminum casting material of size not less than 130 mm x 310mmx5mm thickness and mounted on m.s. plate of size 130mmx310mmx3mm thick. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powders of ackzonoble/ berger/ nerolac paints with 60 to 70 micron thicknesses complete in all respect including fixing the m.s. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in- charge to fulfill the functional requirement., seated pullerproviding and fixing of seated puller of size not less than 2400mm (length) x 800mm (width) x 2000mm. (height), to enhance the strength of upper limbs and the muscles in chest and back and promote cardio-pulmonary function. the main structure frame shall be made from g.i. pipe minimum of 100nb c class welded with m.s. round base plate at least 250 mm & 10mm thick. the handle frame shall be minimum of 32nb c class g.i. pipe. the seat frame minimum of 50nb c class g.i. pipe, closing caps shall be made up of lldpe/high quality fiber reinforced plastic material. high tensile steel with galvanized nuts & bolts shall be used for assembly. the powder coating shall be done with pure polyester powders of ackzonoble/ berger/ nerolac paints with 60 to 70 micron thickness complete in all respect including fixing the m.s. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in-charge to fulfill the functional requirement., chest pressproviding and fixing of chest press of size not less than 2200mm (length) x 800mm (width) x 2000mm. (height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pulmonary function. the main structure frame shall be made from g.i. pipe minimum of 100nb c class welded with m.s. round base plate at least 250 mm & 10mm thick. the handle frame shall be made up from at least 32nb c class g.i. pipe. the seats and back rests to be fitted on the outer frames shall be made up of m.s. sheet of size not less than 330mm x 300 mmx2mm thickness. closing caps shall be made up of lldpe/high quality fiber reinforced plastic material. high tensile steel with galvanized nuts & bolts shall be used for assembly. the powder coating shall be done with pure polyester powders from ackzonoble/ berger/ nerolac paints with 60 to 70 micron thickness complete in all respect including fixing the m.s. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in-charge to fulfill the functional requirement., pommel horseproviding and fixing of pommel horse of size not less than 2150mm (length) x 800mm (width) x 800mm. (height), to enhance the flexibility of lower limbs, waist and abdomen. the main structure frame shall be made from g.i. pipe minimum of 80nb c class welded with m.s. round base plate at least 250 mm & 10mm thick. the handle frame be minimum of 32nb shall be made from c class g.i. pipe. closing caps shall be made up of high quality fiber reinforced plastic material. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powder ackzonoble/ berger/ nerolac paints with 60 to70 micron thickness complete in all respect including fixing the m.s. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in-

State Government

CTN :43117048

17 Dec, 2025 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of radar type pressure transducer of 2 nos. pump sets at jaitpur village bps under badarpur constituency ac-53. - supply of digital pressure transducer, range 0-16 kg/cm2, connection 1 4 bsp (m), body ip 65, accuracy +/- 0.5%, output 4-20 ma, input 24v dc, operating temperature -20deg. to 80 deg. c, deviation 0.3%, protection cover for digital pressure transducer. supply of 7 segment indicator with 4-20 ma input, 4 digit indicator, character size 4 inch with provision of decimal, provision for wall mounting / hanging, ms body with powder coating. supply of 2 core x 1.5 sq mm cable approx 25 mtr. installation, testing and commissioning charges including all the electrical work to be done installation of switch, socket in the gang box (waterproof pvc), pvc pipe for all the wiring and the interconnections between the transducer and indicator. make: skope/ vega/seimens/eip/djb approved

State Government

CTN :43117057

17 Dec, 2025 NA

Delhi - Delhi

Tender For strengthening of e/m equipment of various tube wells installed at sarai kale khan area under jangpura constituency ac-41. - supply of double flange gi column pipe 50 mm dia medium class each of 3 mtrs long duly threaded on both ends, welded fitted with gi flange on both ends and welded support l-type ms bracket in both flange with slot of submersible cable.make: tata/ jindal. , supply of out door type 7.5 to 10hp hut type electrical feeder pillar/metal board of weldedconstruction of size 1370mm x 760mm x 460mmfabricated with 16 swg m.s. sheet with horizontal and vertical intermediate chamber of suitable size onsuitable size insulating board to make the panel robust, having double door with 14 swg s.s hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, vermin proof having following items.1. mccb 63 amp, 4 pole-1 no2. rccb/elcb 63 amp, 4 pole with earth fault indicator and positive contact indication protecting a circuit automatically 1no3. fully automatic star delta starter of 10hp, 3phase oil immersed type 1no4. digital ampere meter 96mmx96mm square shape of 0-30 amp range 1no5. digital voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1no6. led indicating lamps with fitting (a set of 3 lamps) 1set7. shunt capacitor of 5 kvar with three phase isolator 1no8. motor protection assembly having earth leakage protection, phase sequence corrector, single phasing protection, over load protection, high voltage-low voltage protection. 1no9. programmable time switch (i.e. ryb phase & facility to change over from automatic to manual & vice versa) up to 10 h.p.1no10. complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire & thimbling etc.as required. the panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame.make:-all the insert used in panel must be of djb approved makes and should be isi marked where make of that equipment is not approved.djb item code 10.2.1, supply of pvc insulated pvc sheathed copper conductor flat cable size 3 core x 4sq mm,1100 volts, confirming to is 694(each roll 100mtr long). make: granlay / havells./gloster/any djb approved make., supply of nut bolts, washer 1/2 dia 1 long full threaded., supply of rubber packing 50 mm dia. flange., lowering & lifting of sub/sets from bore by taking out double flanged gl pipes, submersible p/set, cable, cutting of rusted nuts and bolts etc and replacement of damaged d/f gi pipes, cable, defective pump set etc as per site requirement and lowering of sub p/set, sub cable, gl pipe etc as required, jointing of cable from sub p/set along with holding of cable with pipes and jointing of d/f pipes etc with nuts bolts and rubber packing etc. the job includes hiring of all t&p, tripod stand, chain pulley block and other material handling equipments, safety gadgets ad required and consumable material will be arranged by the firm as per site requirement. the other material required during execution will be provided by department. djb sor(e&m)-2022 item code 27.1.2

Corporations And Associations And Others

CTN :43117081

17 Dec, 2025 67.97 Lacs

Delhi - Delhi

Tender For supply and installation of open gym equipments in najafgarh zone and central zone under mplads funds for various locations of parks in municipal corporation of delhi. - supply and installation of open gym equipments in najafgarh zone and central zone under mplads funds for various locations of parks in municipal corporation of delhi., seated puller /pull chair made from c class g.i pipe. dimensions: - 1900mm (length) x 740mm (width) x 1920mm. (height). safe area:- 1.2mtr x 3mtr. seated puller equipment made up of c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the center pipe is of 100nb made from c class g.i. pipe. bottom support is of m.s. round plate of dia 250 mm & 10mm thickness welded. all linkages are made up of 25nb c class g.i. pipe. the handle frame is of 32nb c class g.i. pipe. the seat frame is of 32nb c class g.i. pipe. to build structure bushes are used which are made from seamless pipe of 60mm o.d. and 5mm thickness as well as 60mm diameter solid bar bush used. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class. welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. foundation cover closing cap is made from injection moulded plastic lldpe / hdpe. the seats and back rests are fitted on the outer frames are made up of m.s. sheet of size 330 mm x 300 mmx2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges.closing caps are made up of from injection moulded plastic lldpe / hdpe.pins used of diameter 25mm and 17mm are made up from sae 8620 bright material. the bearings used are of 6205 2rs1 and 6203 2rs1 permanent lubricated sealed bearing of reputed brand.high tensile steel with galvanized nuts & bolts are used for assembly.thecirclips used for assembly are of a16. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size)., cross trainer /elliptical exerciser dimensions: - 1320mm (length) x 600mm (width) x 1750mm. (height). safe area: - 1.77 x 1.2mtr. cross trainer equipment made from c class g.i. pipe of different nb.nb stands for nominal bore sizes i.e. internal diameter of pipe in millimeters. the main frame pipes are of 80nb c class g.i. pipe with single bend pipe with 250mm radius. the bottom support of m.s. round plate of dia 250 mm & 10mm thick. the handle frame is made up of 25nb c class g.i. pipe. the foundation used for fixing is a structure and made from center pipe of g.i. of 80 nb c class welded with m.s. round plate of dia 250 mm & 10mm thick. main pipe supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. to build structure bushes are used which are made from m.s. seamless pipe of 60mm od with 5 mm thickness. the footrests are made from injection moulded plastic lldpe / hdpe. closing caps are made up of injection moulded plastic lldpe / hdpe. pins used of diameter 35mm, 25mm, and 17mm are made up from sae 8620 bright .the bearings used are of 6007 2rs1 62052rs1 and 62032rs1 permanent lubricated sealed bearing of reputed brand. high tensile steel with galvanized nuts and bolts are used for assembly. the gym equipment shall be finished smooth with a primer coating of atleast 40 micron followed by epoxy based powder coating with polyster powder coating of at least 60 to 70 micron thickness using exonobel / berger make paints or its equivalent paints. the holding down/fixing of gym equipments shall b

Central Government/Public Sector

CTN :43085828

27 Dec, 2025 NA

Goa - Goa

Tender For statement of technical requirement for preperation of ietm document for ship system and integration of equipment ietm by ietm integrator. - main engine, gear box, stern gear system, diesel alternator with accessories, steering gear, fin stabilizer, ac plant, stp/vts, lo centrifuge, fo centrifuge, salvage pump, fire pump, bilge pump, ro plant, fresh water pump and hydrophore tank, ows, hp air cylinder, ref plant, high pressure air compressor (dd), high pressure air compressor (md), fo transfer pump (gear pumps), lo transfer pump (gear pumps), magazine fire fighting system, fm 200 fire fighting system, dirty oil pump, ba charging compressor with accessories, avcat pump, avcat filter water seperator & wbf, fuel oil stripping pump, diesel driven fire pump, emergency da, iccp & asg, afac, advanced composite communication system (accs), lan system, mbsre & intercom, msb, apms, nlcp, sicads, sirs, sp telephone, sdn, srgm, srcg, tacan, trigun, uwt, v/uhf comint df search receiver (nayan), xbt, ipms, window wiper, hvlas, hdcs, uass, hvac equipment, hangar door, asist/nghhts, store lift, anchor capstan

CTN :43036406

18 Dec, 2025 10.00 Lacs

Ganganagar - Rajasthan

Tender For work of providing and fixing open gyms in various parks in the municipal council area (mla lad) - surfing boardproviding and fixing of surfing board of size not less than 1000mm (length) x 600mm (width) x 1400mm (height), to build up the muscle groups of the waist, enhance the body coordination and flexibility. the main structure frame shall be made from g.1. pipe minimum of 80nb "c" class welded with m.s. round base plate atleast 0250 mm & 10mm thick. the footrests shall be made from high quality fiber reinforced plastic material. high tensile steel with galvanized nut bolts shall be used for assembly. the powder coating shall be done with pure polyester powder of ackzonoble berger/ nerolac with minimum 60 to 70 micron thickness, complete in all respect including fixing the m.s. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in charge to fullfil the functional requirement. 1. (the cement concrete and excavation work shall be including.), thai-chi spinner (2 wheel)providing and fixing of thi-chi spinner (2 wheel) of size not less thal 700mm (length) x 1000mm (width) x 1280mm (hight), to increase mobiltiy of shoulder elbow and hip-knee. the main structure frame shall be made from g.i pipe minimum of 80 bn "c" class welded with m.s. round base plate atleast 250mm & 10 mm thick. high tensile s.s. nut bolts shall be used for assembly. the powder casting shall be done with pure plyester powders from ackzonoble/berger/nerolac paint. with 60 to 70 micron thickness, complete in all respect including fixing the m.s. hodfast in cement concrete to hold the whole structure, under the direction of engineer-in-charge to fullfil the functional requirement. 1. (the cement concrete and excavation work shall be including), leg pressproviding and fixing of leg press of size not less than 1840mm (length) x 360mm (width) x 1560mm. (height) to build up the muscles of thigh and enhence the strength of waist. the mian structure frame shall be made from g.i. pipe minimum of 80nb "c" class welded with m.s. roaund base plate atlesat 250mm & 10mm thick. the sleeve frame minimum of 100 od and m.s. seamless pipe with thickness 5mm. this sleeve should be disassembled from main frame. the footrests shall be made from casted aluminum material, having sizes minimum of 130mm x 310mm x 5mm thick. closing caps shall be made up of high quality fiber rainforced plastic material. high tensile steel with galvainzed nuts and bolts shall be used for assembly. the powder casting shall be done with pure plyester powders of ackzonoble/berger/ nerolac with 60 to 70 mircon thickness, complete in all respet including fixing the m.s. holdfast in cement conrete to hold the whole strucute, under the directins of engineer-in-charge to fullfil the functional requirements. 1. (the cement concrete and excavation work shall be including.), double standing twisterproviding and fixing of double twister standing of size not less than 1500mm (length) x 600mm (width) x 1300mm. (height) to enhence flexibility of waist. the main structure frame shall be made from g.i. pipe minimum of 80nb "c" class welded with m.s. roaund base plate atlesat 250mm & 10mm thick. the handle frame is minimum of 25nb shall be made from "c" class g.i. pipe. the twister plate to be fitted on the bottom frame shall be made up of m.s. roaund plate of minimum size 300mm and 10mm thick. closing caps shall be made up of high quality fiber rainforced plastic material. high tensile steel with galvainzed nuts and bolts shall be used for assembly. the powder casting shall be done with pure plyester powders of ackzonoble/berger/ nerolac paint with 60 to 70 mircon thickness, complete in all respet including fixing the m.s. holdfast in cement conrete to hold the whole strucute, under the directins of engineer-in-charge to fullfil the functional requirements. 1. (the cement concrete and excavation work shall be including.), construction of foundation/inaugration pedst

CTN :42739144

26 Dec, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of 25v58c907 iccp sysetm - iccp system p15 class , iccp system p28 class , onboard spares as per 1 (z) of atc ins kamorta , onboard spares as per 1(ad) of atc ins p-15 ships , base depot spares as per p15 ships , training charges as per 1 (ab) of atc kamorta , training charges as per 1 (af) of atc ins p15 ships

Powder Coating Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

Corporations And Associations And Others

Central Government/Public Sector