Latest power contactor repair Tenders | Government power contactor repair Tenders

State Government

CTN :44291353

01 Apr, 2026 4.10 Lacs

Balurghat - West Bengal

Tender For corrigendum : supply, delivery, fitting, fixing, and installation, of the 50 no(s)., of the led flood light (200w), and the (other) allied work(s), under the balurghat (d) division, in the district, of the dakshin dinajpur. - - supply, delivery, fitting, fixing, and installation, of the 50 (fifty) no(s)., of the ‘led flood light (200w)’, for the 33 kv, and 11 kv switch-yard, and surrounding area(s) illumination(s), and the (other) allied electrical work(s), within the premise(s), of the (different) sub-station(s), divisional office, balurghat, and divisional store, balurghat, under the balurghat (d) division, in the district, of the dakshin dinajpur.

State Government

CTN :44508588

24 Mar, 2026 9.91 Lacs

Delhi - Delhi

Tender For rewiring and replacement of led fitting and allied electrical work at dm office alipur delhi

Central Government/Public Sector

CTN :44471114

25 Mar, 2026 1.57 Lacs

Dhanbad - Jharkhand

Tender For towards the work of supply and fitting of various electrical items at 03 nos. of road weighbridge of asbnc colliery of sijua area.

CTN :44104684

19 Mar, 2026 NA

Bangalore - Karnataka

Tender For bid to ras corrigendum : repair of veh - piston , piston pin , rings , valve inlet and exhaust , valve guide , sleeve engine , main bearing , big end bearing connecting bearing , .valve oil seal , dummy set , oil pump assembly , water pump , cam bush , head gasket , main oil seal , timing oil seal , thermostat valve , oil filter , fuel filter , water separator , air filter , gasket kit full , annabond , engine block re-boring sleeve fitting honing and finishing lathe , crank shaft bend removing and main and big end grinding polishing lathe , camshaft bush fitting and push setting , engine head assembly stripping and all parts valve valve guide valve head , clutch plate pressure plate fly wheel skimming pressure plate surfacing and clutch plate new liner with rivet fitting , turbo charger assembly repair service and full overhauling with oil seal , air compressor stripping and checking and checking all parts damaged ring , radiator assembly and water cooler service and soldering , self starter assembly alternate repair and service and testing , pump nozzle , cam plate , t piston , fuel pump service kit , tappet roller , full kit with o rings washer , van pump service kit , engine assembly removing the veh and above mentioned all parts removing and stripping and connected work , cross member , nut bolt and for cross member , all cross member gearbox assy fuel tank both side and full electrical connection , rod spring new and joint pin and bush , both side rod spring assembly removing stripping broken spring leaf

CTN :44499657

31 Mar, 2026 NA

Banaskantha - Gujarat

Tender For supply of 24 volt, 30 volt, and 36 volt led lights and 27 volt spiral lamp (bulb) - one unit, 2. 27 volt spiral lamp (bulb) fixtures - one unit, 3. timer switch - one unit, 4. holder (for spiral lamp fixtures) - one unit, 5. 1/18 wire (for electrical work) - one bundle, 6. led light fixtures, clamps, pipes, nuts, bolts - one unit (with all materials), 7. chinal fuse 32 ampere - one unit, 8. tape roll - one unit, 9. cotton tape roll - one unit, 10. two core service wire - one unit, 11. 32 ampere automatic trip main switch - one unit, 12. 24 volt, 30 volt and 36 volt old led light repairing work - one unit, 13. cement bag - one, 14. round iron nails in sizes: 6, 8, 10, 12, 16, 20, 25 - twenty kilograms (separate prices to be indicated), 15. pvc pipe sizes in mm: 20, 25, 32, 40, 50, 63, 75, 90, 110, 140, 160, 200 - one meter (separate prices to be indicated, including all fitting materials), 16. coarse gravel - one brass, 17. fine gravel (grit) - one brass, 18. metal - one brass, 19. morrum - one brass, 20. panchayat operated v. works sub motor repairing, pump repairing, other related work (repairing related) 12.5 to 65 h.p - per sub meter, per repairing, other related repairing work, 21. jcb machine work - per hour.

CTN :44481057

20 Mar, 2026 NA

Howrah - West Bengal

Tender For auction sale of others - condemned balance brick work and wooden parts of 1] turning and fitting section shed [sl 26], 2] press hammer section shed [sl 25], 3] wagon shop, casnub bogie , sp shop [sl 28] and 4] point and crossing shop [sl 29] of burn standard co limited, howrah. this lot will be sold excluding all types of ferrous and non- ferrous materials , reinforcement released from rcc , chimney, different machines and machine parts of mechanical and electrical department, transformer & other equipment, outside boundary wall, psc sleeper, other p.way items, ms & plastic drums, wooden pattern , etc, total qty- 01 by lot. as per visual estimation , the lot consisting of approximately 2283.64 cum brick works and 9893.12 kg wooden work [this quantity is indicative only, lot will be delivered in by lot basis]. condition-1] the sold lot will be handed over to the purchaser in presence of concerned custodian , isa-sv, rpf, cdms and other personnel as the case may be , 2] dismantling work of sold structure is to be done by the purchaser on his own arrangement by providing tools, safety gears, machinery and labour required for the purpose. 3] purchaser should ensure to keep a safety banner around the work spot. 4] any loss / damage that may arise during dismantling work due to accident etc, shall be the sole responsibility of the purchaser and no claim on this account will be entertained by the railways under any circumstances, 5] dismantling of the sold lot is allowed only up to the ground level of the condemned structures. 6] dismantling of the condemned structures [sold lot] will take place in presence of engg. officials. 7] purchaser shall ensure that dismantling work does not affect or endanger safety of life and railway property in near vicinity.8] no explosives can be used for demolishing, 9] custodian / engg. official has to ensure that debris arisen out of dismantling to be cleared by purchaser in proportion of delivery of released materials and he will invariably certify in sale completion report that all debris/waste etc. generated has been cleared by purchaser and the land is made clean, clear and level for further use, 10] materials will be sold on "as is where is" basis.

CTN :44477126

25 Mar, 2026 20.00 Lacs

Chittorgarh - Rajasthan

Tender For फैज वायर व अन्य विद्युत सामग्री सप्लाई एवं फिक्सिंग/फिटींग का कार्य। - work of supply and fixing/fitting of phase wire and other electrical materials.

CTN :44480966

23 Mar, 2026 NA

Mandvi - Gujarat

Tender For (a) water supply department 1. complete fitting and filling of water lines at different places in mandvi city. 2. complete cleaning of tube wells under the mandvi municipality-run water scheme. 3. price per day for renting a generator set during emergencies with an operator on your letterhead. 4. supply of water bottles of different sizes at the mandvi municipality office and in different programs. 5. removal of motors stuck in boreholes operated by the municipality (price per borehole on letterhead). (b) roadlight department1. supply of electrical goods to the mandvi municipality office. (c) sanitation department1. price of cleaning equipment required for the sanitation department. 2. prices for repairing/tyre/battery of various vehicles of mandvi municipality. 3. price for catching stray animals in mandvi municipality area and placing them at the place specified by the municipality per piece (on own letterpad). 4. 1. cleaning and disposal of sludge from public toilets and urinals/chambers owned by the office (price per chamber and chamber no.-1 on letterpad)2. cleaning of 3*2 sewer chambers owned by the office including sludge (price of chamber no. 1 on letterpad) 3.8 to 10 feet chambers including sludge (price of chamber no. 1 on letterpad). 5. rental of de-watering pumps during floods (price of one piece per day with operator on letterpad). 6. renting of jcb loader, hitachi tractor etc. equipment in case of emergency (price per day with driver on letter pad). 7. price of tractor vehicle and team for catching stray cattle on public roads in the city and placing 1 cattle at the specified place (on own letter pad). 8. price of iron plate foot 1 and plaque galvanized for repairing garbage bins, containers and price of welding as well as price of supply of 4.5 cubic meter container no.-1 (on own letter pad). 9. price of iron jari garbage bin and 4*3 box garbage bin (price per no.-1) and price of general repairing of different sizes of municipality tractor trolley no.-1 (on own letter pad). 10. price of scrap metal of mandvi municipality (price per kg on its own letterpad of different metals). 11. purchase of necessary equipment for fire brigade. 12. purchase of various spraying chemicals by mandvi municipality. 13. supply of acid for liquid phenyl bathroom/urinary cleaning (price per liter) phenyl tablet chlorine tablet (price per kg) (on its own letterpad). 14. price for supplying cut ready wood that can be used in crematorium to the crematorium godown (price per maund on letterpad). 15. removal and fitting of motor of drainage pumping station and repair of horse pipe drainage pipe fitting (on letterpad). 16. work related to cleaning of bhid bazar, st road drainage drain of mandvi city (on letterpad). (d) general administration department1. price of uniform cloth (pants, shirts) for office employees (price per meter) (on own letterpad). 2. work related to making i-cards for employees of mandvi municipality (price per piece on letterpad). 3. office printing work for administrative work of all departments of the office (as per office sample). 4. videography/steel photography work of different sizes. 5. work related to sound system/steel and mobile sound system. 6. work related to different stationery supplies and xerox for mandvi municipality office. 7. price for printing banner hoardings/vinyl printing banner hoardings for mandvi municipality office (price per sq. ft. on letterpad). 8. mandvi municipality office regarding supply of all parts related to computers, printers, telephones. 9. prices for repairing computers, telephones, wi-fi, networks etc.. 10. prices for maintenance of cctv cameras of the municipality office and mandvi city (on letterpad). 11. prices for maintenance of ac installed by the office (on letterpad). 12. prices for maintenance of generators installed by the office (on letterpad). 13. prices for maintenance of solar panels and solar lights installed by the office (on letterpad)

State Government

CTN :44451840

18 Mar, 2026 1.34 Lacs

Karauli - Rajasthan

Tender For जिला परिषद करौली में जिला पंचायत रिर्सोस सेन्टर (डी.पी.आर.सी) भवन में कम्प्यूटर लैब हेतु फर्नीचर एवं विधुत फिटिंग कार्य की पंजीकृत फर्मो से सीमित निविदा - limited tender from registered firms for furniture and electrical fitting work for computer lab in district panchayat resource center (dprc) building in zilla parishad karauli.

Corporations And Associations And Others

CTN :44469309

27 Mar, 2026 33.62 Lacs

Cooch Behar - West Bengal

Tender For construction of workshop shed made of pre fabricated steel structure fitting fixing steel sheet work roofing by colour coated on both side with one service pit inflator machine room including electrical works at maynaguri depot nbstc dist jal

Power Contactor Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government/Public Sector

State Government

Corporations And Associations And Others