Latest power house machinery Tenders | Government power house machinery Tenders

Co-operative

CTN :39758912

05 Apr, 2025 24.50 Lacs

Bengaluru - Karnataka

Tender For supply and installation of 400kvar capacitor bank and related extension, revamping, retrofitment works(auto power factor control system) to cattle feed plant, rajanukunte

CTN :39762253

10 Apr, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of 24vz7c002boq - over load relay b 16/30 16-25 amps , fuse 2 amps , coil for under voltage release rated 220v dc , main contact set per pole , wattmeter 40-0-500kw red mark at 350 kw for ct 1000/5a , indicating lamps 24v 1.2w green , circuit breaker moulded case 160a , 415v ac , 3ph , 50hz , indicating kilowalt meter 15-o-100kw , ammeter 0-100a red mark at 609a for ct 1000/5a , voltmeter 0-500v red mark at 415v , frequency meter 45-50 -55hz red mark at 50 hz , double voltmeter 0-500v red mark at 415v 144x144m 90 scale , phasing in device type ep1 , double frequency meter 45-50-55hz red mark at 50hz 144x144 , kw meter 40-0-350kw red mark at 250kw 600 5a 440v 60hz size , short circuit protection card , rectifier card , over current and reverse power card , power factor meter 0.5-1-0.5 indicating for ct 1000 5a , synchroscope with revolving pointer 415v 50 hz 144x144 , alternator and ships main protection relay

CTN :39699891

24 Mar, 2025 20.00 Lacs

Udaipur - Rajasthan

Tender For rate contract for supply of electric items for fy 2025-26. - providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . led street light fixture with minimum lumen output 3700 lm, led street light fixture with minimum lumen output 5600lm, led street light fixture with minimum lumen output 8700 lm, providing & laying p.v.c. / xlpe insulated & p.v.c. sheathed un-arrmoured aluminium cable confirming to is:1554 p-i / is :7098 p - i of 1.1 kv with h4- grade electrolytic aluminium conductor confirming to is 8130 of purity >99.6 %, inner / outer sheath confirming to is:5831 in existing rcc / hume / stoneware / pvc pipe/ open duct/cable trench / cable tray (with cable tie) including testing etc. as required of following size. oem must have its own in house nabl accrediated laboratory for testing procedure as per is:10810. for additional technical parameters of product / work refer annexure a attached with this bsr 6sqmm 2core, 10sqmm 2core, 6sqmm 3core, 10sqmm 3core, providing & fixing of ac operated heavy duty 230 /440 volt power contactor as per pwd specification for electrical works, isi marked is/iec 60947-4-1 : 2000 having provision of mechanical interlocking, auxilary contacts, din rail mounting type including making connections, testing etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 3 pole power contactors with following ac 3 rating 40amp, providing & fixing of mechanical / digital time switch having following day / week programme and minimum 100 hours reserve and ac1 rating of 16-20 amperes including making connection, programming conforming to iec 60730-1 and 60730-2-7 etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . one day reserve (analog type ), p & f of 240 v electronic on - off timer 3 -30 sec / 12 - 120 sec including making connection etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., p & f of 415 v electronic on - off timer 3 -30 sec / 12 - 120 sec including making connection etc. as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., providing & fixing of 240/415 v ac mcb with positive isolation of 10 k

State Government

CTN :39711294

24 Mar, 2025 NA

Manuguru - Telangana

Tender For supply of t and p materials for cam division/stage-i and ii/btps.-supply of t and p materials for cam division/stage-i and ii/btps.- heavy duty general purpose hydraulic jack,capacity:5ton,, stroke:150mm,model:xl00, hydraulic jack:, capacity:20ton,stroke length :12mm,jack closed height:lessthan 55mm., hydraulic pump specifications.no of plungers:1,maximum pressure, pump, can develop:700kg/cm2,discharge/stroke.cc:2.8,weight: <=9kg., pump with teliscopic collapsible handle, hydraulic jack,with pmp threaded,100t,150mm, make: ener pac, portable arc welding machine model tornado -201 power saource with with, 3 meters supply cable + 3 meters welding cable with holder + 3 meters, return cable with earth clamp, make : esab/l&t/ador fontec, digital vibration meter model:ird 811d, gauge,dial;range:0.01 to 20 mm, make: mitutoyo, dial guage stand magnetic on/off switch, make:mitutoyo, vernier caliper (0-150mm) code no.530-335, vernier caliper (0-300mm) code no.530-322, make:mitutoyo, outside micrometer (150-300mm) code no.104-136a, make:mitutoyo, outside micrometer (300-400mm) code no.104-142a, tubular inside micrometer code no.137-208, block,chain pulley;type:triple spur gear manual;capacity:5 t;length:20, m;make:indef;additional information:lift p-series, block,chain pulley;capacity:2 t;maxi lift:20 m, block,chain pulley;type:heavy duty triple spur gear,light weight, body;capacity:1 t;maxi lift:15 m, make: indef/demag/kito/venus, d-shackle 5ton, make: usha martin, shackle;type:d;load rating:1 t, d-shackle 2 ton, make: usha martin, shackle;type:d;load rating:3 t, make: usha martin, d shackles 10 ton lifting capacity, make: usha martin, steel wire rope slings 10 ton capacity x 6mtr long, make: usha martin, belt sling,75 mm width 4 mtrs. length of polyster duplex flat webbing, with plain loops at both ends safety factor 7:1., make: usha martin, circlip;type:plyer;size:195 mm;additional information:ptno 1441-7internal nose, hand operated high pressure grease gun with all accessories(hose,nipples & trolley arrangement)-5kg capacity, allen keys set,1/16'' to 3/8'', feeler gauge, thickness: 0.03 to 0.5mm, no of leaves: 13 (long leaves),series: 184, make:mitutoyo, universal sets adjustable spanner 1171 cp insulation plier 162-8j,s.d.932&859, spanner set,double open end;size:32x36 mm;material:chrome vanadium/carbon steel, taparia make heavy duty pipe wrench ,length-450 mm,least max opening 73mm,product no-hpw 18, make:tapparia/mekastar/stanley/torquestar, taparia make heavy duty pipe wrench ,length-250 mm,least max opening, 48mm,product no-hpw 10, make:tapparia/mekastar/stanley/torquestar, d spanners set, 12nos, 6-32 mm, make: jhalani, bench vice,150 mm, ring spanner 6-32mm, hand pump, for oil barrel, hand greaqse gun, capacity:1kg, spanner,mekaster double ended deep offset ring spanner,chrome vanadium, steel chrome plated,wave profile having a/f size (mm):32x36 confirming, to din 838,iso 3318,10103,10104&691.,part no.mdrm-3236, spanner,mekaster double open ended spanner chrome vanadium, steel,chrome plated,position of open ends 15 degree having a/f size, (mm): 36x41 confirming to din 3110,899,iso 1711,10102,691&3318,part, no.mdom-3641, mekaster double ended deep offset ring spanner, chrome vanadium steel, chrome plated, wave profile having a/f size (mm):41x46 confirming to, din 838, iso 3318, 10103, 10104 & 691.,part no.mdrm-4146, spanner set,double open end;size:41x46 mm;material:chrome, vanadium/carbon steel, 400 amps inverter welding rectifier.model: buddy arc 400i, make esab, l and t, ador, fontec, chain pulley block,5t,10m, make - indef, demag, kito, venus, block,chain pulley;type:p;capacity:2 t;maxi lift:10 m, make - indef, demag, kito, venus, block,chain pulley;type:p;capacity:3 t;maxi lift:10 m, make - indef, demag, kito, venus, self supporting extendable aluminum ladder size; 16feet(closed) to 27, feet (extended), wire rope slings with eye & eye, 25ton x 1 1/4 x 6 mtrs length., make usha martin, steel wire r

CTN :39687154

12 Apr, 2025 50.00 Lacs

Mauganj - Madhya Pradesh

Tender For supply electrical materials including loading, unloading, stacking etc. complete at the office of municipal council mauganj, district- mauganj, for financial year 2025-26. - led ( ) 60w efficacy=110lm/w colour temprature 6000k-7000k, burning life 50000 hrs. power factor = 0.95, surge protection ip 66, cri=70, protection= 4kv, lm79, lm80 & nabl certificate, led ( ) 30w efficacy=110lm/w colour temprature 6000k-7000k, burning life 50000 hrs. power factor = 0.95, surge protection ip 66, cri=70, protection= 4kv, lm79, lm80 & nabl certificate, led 60w led 60w , led 30w led 30w , 2.5mm, 1.5mm, 1mm, al 6mm, 2 12mm, led 20w, leb 9w, leb tubelight 30w, 1.25" , 6" 4 , , 48", 12", 12", 200 a, 100 a , 63 a , 200 a, 100a, 63a, , 1500w, 2000w, 18" , 6", 12", 6" , , , , , , , 11000 v, , 6 a (c series), ,6 a, 6 a, 32a, 63a,, ( 1 module), , 3.15, 4mf, 16mm, ( ) / , , 2.5 , , al 1.5mm (90 . ), al 2 mm (90 . ), al 2.5 mm (90 . ), pvc , pvc 1", led 40 w, 990x640x520 mn3, , , led (100ml/ ), ( / ), ( / ), ac 1.5 ( ) , , ,

State Government

CTN :39724767

25 Mar, 2025 56.61 Lacs

Delhi - Delhi

Tender For repair maintenance of electrical and mechanical services at residential flats / bunglow at rajpur road, civil lines, delhi-110054. (sh- supply, installation, testing and commissioning of igbt based power factor panel with electrical accessories).

Central Government/Public Sector

CTN :39699089

25 Mar, 2025 3.69 Lacs

Raigarh - Chhattisgarh

Tender For installation , testing and commissioning of 02 nos 3.3 kv automatic power factor correction (apfcr) panel at different substation of chhal ocm, secl raigarh area .

Central Government And Public Sector

CTN :39497698

31 Mar, 2025 NA

Chennai - Tamil Nadu

Tender For corrigendum : providing of calibration services - medical; mass and volume, pressure and vacuum, density and viscosity, specific heat & humidity, temperature, density, pressure, medical device calibration, frequency, power factor, phase angle, speed & acceleration; nabl labs; ..

State Government

CTN :39727326

20 Mar, 2025 3.00 Lacs

Jaipur - Rajasthan

Tender For supply of installation, testing & commissioning of 10 kva online ups q-management lobby-10 kva online upssupply of installation testing & commissioning of 10 kva online ups,i>0.99 i/p power factor, 160-280 vca i/p voltage range@rated load 46-54 hz i/p frequency,0 to 40 degree operation tem, upto 93% double conversion efficiency, 192v dc voltage, automatic bypass (inbuilt), lcd display showing ups parameters, audible alarm: mains failure alarm, low battery alarm ups warning, overload, fault & bypass mode, with 26 ahx16 nos smf batteries, o/p voltage: 230 v during mains -voltage variation (static +/- 1% (should not be more than specified values) over loading: upto 130% for 05 minutes & upto 110% for 10 min. ups should be genset compatible, iso 9001, iso 45001 and iso 14001 certification bis (in name of ups oem), rohs type test report of the product series, ms rack required in respect to approved make-numeric/apc/emerson.