Latest power house machinery Tenders | Government power house machinery Tenders

Central Government/Public Sector

CTN :38570825

03 Jan, 2025 NA

Roorkee - Uttarakhand

Tender For supply and commissioning of active passive material for the networking of new academic block for chemistry department - products, distribution switches 24 x 1/10/25g sfp28 interfaces with redundant power supply and have an 40g uplink port, access switch l2 24x 10g multigigabit (10g/5g/2.5g/1g/100m) ports, poe and additional option for modular ul ports supports 10g or 25g, access switch 48 nos. 10/100/1000 base-t poe ports and additional 4 nos. of 10g with stack cable and stack module, indoor wireless access point 4x4 mimo on both radio interfaces and mu-mimo technology, fibre module, 10 g sm (lc), fibre module, 40 g sm (lc), cat-6a cable s/ftp (305/500 meters box), cat-6a i/o (1 x rj45), for face plate, faceplate with gang box, cat-6a patch cord, s/ftp, 2 meter, cat-6a patch cord, s/ftp, 1 meter, cat6a 24-port patch panel (loaded), fibre cable, os2 9/ 125 sm,12-core, armoured, fibre cable, os2 9/125 sm, 6-core, armoured, fibre llu, 24-fibre with splice tray, rack mount fully loaded, fibre llu, 12-fibre with splice tray, rack mount fully loaded, fibre patch cord, lc-lc sm, duplex 3 meter, fibre patch cord, sc apc - sc apc sm, simplex 2 meter, fibre pigtail, sc apc single mode, fibre patch cord, lc apc - lc upc sm, duplex 3 meter, outside plant dome fiber optic splice enclosure ip 68 rating, rack, 15u, minimum 600mm depth, wall mount with accessories, sitc of 60 kva online ups with 30 min backup, supply of 32 mm pvc conduit with accessories (lsi marked), supply of 40 mm hdpe pipe, services, laying of utp cable in raceway/conduit/casing/hdpe, installation & termination of i/o user side (including i/o punching, labelling and testing), installation of jack panel (including i/o punching, labelling and testing), installation of face plate and gang box (including i/o punching, labelling and testing), laying of fibre cable in hdpe pipes as per laying instructions (including hdr drilling, hdpe pipe, fibre pulling, route markers, pits etc.), installation of rack, installation of llu (including splicing), integration, testing & documentation

Central Government/Public Sector

CTN :38557824

03 Jan, 2025 NA

Subansiri - Arunachal Pradesh

Tender For supply of diy lab accessories - raspberry pi 5 8gb ram with 64gb memory card and piduino official raspberry pi 5 27w usb power supply , arduino uno , 8 hdmi supported lcd display , key board , mouse , multi bit screw driver small , multi bit screw driver big , relay module , smps , plier , nose plier , wire striper cutter , hot air blower , digital multimeter , allen key set , 500 w hand drill machine , cordless hand drill machine , 670w angle grinder , pla fliament 1kg , jumper wires mm 40psc , jumper wires mf 40psc , jumper wires ff 40psc , desoldering wick , multi bit soldering iron , solder wire , soldering flux , desoldering pump , soldering iron stand , red and blue led , bread board 830 , dc jack male , potentio meter , electric tape , double side tape , hot glue gun and stick , different size drill bit set , 4 wood cutter wheel , 4 hand grinding wheel , awg high quality wire , different size zip ties , m3 bolt length , m4 bolt length , esp32 , 4 channel 5v relay module control , 5v dc power adapter , 6a 220v single pole ac switch and pvc board , 230 v square cooling fan , 5 w 220 v led bulb , holder and pvc board for led bulb , dual color wire for wiring , pir sensor , l293d 4channel dc motor driver shield for microcontrollers4 channel driver , pca9685 16 channel 12 bit pwm servo motor driver i2c module uno pic , x400 s400 drone kits included carbon fibre frame with landing gear motor prop and esc , pixhawk fc with power module saftey switch and buzzer original , xt 60 connector male-female pair , gnss receiver stand , vibration absorbing pad for fc , 200by300mm belcro belt , 6000 mah lipo battery , gnss receiver , 10 ch rc transmitter and receiver for drone , servo tester , lipo battery balance charger , duracell aa rechargeable battery , aa battery charger , sensor kit 40 in 1 bid number/ ( ( ) ): gem/2024/b/5694372 dated/* : 11-12-2024 bid document/ 1 1 / 45

State Government

CTN :38605436

23 Dec, 2024 NA

Delhi - Delhi

Tender For dc-dc converter for dispatcher of 3s02 thales afc gate used in thales 3s02 afc gat e dispatcher for power supply. 1. specifications- 24v dc to 12v dc converter module. 1.1 make-la mda/cosel. 1.2 model- lambda pp25-24-12, cosel zus252412, 1.3 input voltage-18v to 36v dc. 1.4 output voltage-12v dc, output current-2.1a,output power=25.2w. 1.5 single output dc convertor with ultra thin profile-h-8mm, l-65mm, w-50mm. 1.6 terminal assignments: 1.6.1 input: pin*1 +v, pin*2 -v , pin*3 cnt. 1.6.2 output: pin*4 +v, pin*5 -v, pin*6 trm. 1.7 case: copper (thickness 0.4m m). 1.8 operating temperature -20 to +71 degreec. 1.9 convection cooling, isolation between input and output, overload voltage & overload current protection. 1.10 warranty-minimum one year. note: - 2. actual size, dimensions and fitment of supplied item must be "compatible" with the existing th ales 3s02 afc gates of dmrc in all respects. 3. vendor is required to mandatorily demonstrate/ sa mple test of the proposed items within 10 days from the date of award of loa/po for the functionalit y & compatibility with the existing thales 3s02 afc gates. 4. vendor is to provide the datasheets of the proposed items clearly depicting the technical details such as given below at the time of bid sub mission for technical evaluation. 4.1 make & model of the offered item. 4.2 specifications/ part no. w .r.t. its of supplied item. 4.3 all technical specs as per point 1 above. 5. vendor is to provide the "spe cifications compliance certificate" on their company's official letterhead as part of bid submission. 6. the supplied material must be compatible with existing system of dmrc in all respects. ]

State Government

CTN :38439293

23 Dec, 2024 NA

Delhi - Delhi

Tender For dc-dc converter for dispatcher of 3s02 thales afc gate used in thales 3s02 afc gat e dispatcher for power supply. 1. specifications- 24v dc to 12v dc converter module. 1.1 make-la mda/cosel. 1.2 model- lambda pp25-24-12, cosel zus252412, 1.3 input voltage-18v to 36v dc. 1.4 output voltage-12v dc, output current-2.1a,output power=25.2w. 1.5 single output dc convertor with ultra thin profile-h-8mm, l-65mm, w-50mm. 1.6 terminal assignments: 1.6.1 input: pin*1 +v, pin*2 -v , pin*3 cnt. 1.6.2 output: pin*4 +v, pin*5 -v, pin*6 trm. 1.7 case: copper (thickness 0.4m m). 1.8 operating temperature -20 to +71 degreec. 1.9 convection cooling, isolation between input and output, overload voltage & overload current protection. 1.10 warranty-minimum one year. note: - 2. actual size, dimensions and fitment of supplied item must be "compatible" with the existing th ales 3s02 afc gates of dmrc in all respects. 3. vendor is required to mandatorily demonstrate/ sa mple test of the proposed items within 10 days from the date of award of loa/po for the functionalit y & compatibility with the existing thales 3s02 afc gates. 4. vendor is to provide the datasheets of the proposed items clearly depicting the technical details such as given below at the time of bid sub mission for technical evaluation. 4.1 make & model of the offered item. 4.2 specifications/ part no. w .r.t. its of supplied item. 4.3 all technical specs as per point 1 above. 5. vendor is to provide the "spe cifications compliance certificate" on their company's official letterhead as part of bid submission. 6. the supplied material must be compatible with existing system of dmrc in all respects. ]

Central Government/Public Sector

CTN :36927032

20 Dec, 2024 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : procurement of fire alarm system spares for ntpc auraiya gas powerproject - cpu module,edwards,3-cpu3, power supply module: 3pps/m-230; edwards, single i/p module,siga-ct1,edwards, control relay module,siga-cr,edwards, mounting base,siga-sb,edwards, user interface card,3-rs485, serial comm card,edwards,3-rs232

Central Government/Public Sector

CTN :37961205

20 Dec, 2024 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : procurement of auma make actuators spare for ntpc sipat - worm wheel,auma,actuator,sa25.1, worm wheel,auma,actuator,sa30.1, worm shaft assy,auma,actuator,sa25.1-f25, worm shaft assy,auma,actuator,sa30.1-f30, drive shaft assy,3.0/4.3,auma,actuator, power supply board,auma,actuator,am01.1, logic board am,auma,sa16.2, push button/relay board,actuator,sa25.1, interface board assy,auma,actuator, control module,auma,sa30.1b1 90 epac, hollow drive shaft asy for actr-sa100a90, spur gear,2.2,auma,actuator,sa50e90, lsd assy,31,auma,actuator,sa50a

Central Government/Public Sector

CTN :38599629

19 Dec, 2024 NA

Visakhapatnam - Andhra Pradesh

Tender For procurement of power supply module for cctv for u-6 in ntpc unchahar

Central Government And Public Sector

CTN :38587336

28 Dec, 2024 8.22 Lacs

Mumbai - Maharashtra

Tender For customized annual maintenance contract (amc) / comprehensive maintenance contract (cmc) for pre-owned products - amc; zeiss; annual maintenance contract (amc); quarterly; no; 1. routine maintenance, performance checks, re-alignment, repair and replacement of defective components and parts-hv cable assembly, ex mva "x" part-no.: 311311 -orsay , ex mva "y", valve assembly, spare assembly, o-ring iso valve, electro valve, 20 kv high voltage module, leader card holder, pneumatic actuator set, apertures assembly, o-ring for nozzles block, o-ring for aperture drive, steppermotor driver 51xpack2 /trinamic, gis psu, actuation cylinder complete, connector, nozzle head complete, high voltage module, grounding module f/liner tube lens, floater 300v, 0,5a 3/4", ex eht digit. controlled tetrode supply, xb scan piggy board, scan-generator, complete (auriga), e/o board hw4.0(3.5) with fw3.1.0, ex vac.-control board leo 15xx "stan dar, interlock piggy (mod. version), needle valve piggy with mounting parts, vac relay pcb (1400), main psu, fib-electronic pcb complete, deflector amplifier, internal generator, 6 hole aperture, pre-aperture 3h6x0,25/ 0,110mm, anode screw din 7984 m4x6 e, helicoflex-hnv-120-19,7-23,7-2-alu a5, copper gasket, spring+spool f/y axis assy, power supply tpsll0 /pfeiffer vacuum, compact fullrange gauge pkr 251, scintillator assembly, mikro-magnetventil 24 vdc, control pcb water chiller, ion pump, 30l/s noble pump, exhaust, ion pump kit (ion pump+dn35cf) -orsay , ion pump psu(neg) to 910846 1p100/702/02, tip seal kit for nxdsloi pump, illumination assy infrared,compl., spanner wrench, scintillator-changer, pcba 3-channel controller w/rs232, vp holder for 6 hole aperture l00na, extractor - aperture, denka kathode tfe 174c, transmitter extractor voltage, vat civ valve upgrade kit ose au/u/vp, servicepackage hipace 300 plus ose, se-multiplier, complete, pcba 3-channel controller w/rs232, ads 3 jsr m/s repair-kit, membrane f. isol-use# 348201-8902-910, motor assy, step, uhv,sd,1.0a, y-motor assy,step,uhv,sd,1.8a, r motor assembly pllo motor, vac relay pcb (1400), x-spring assembly spool + spring, install.kit for opt. sensor (le-geu-017), on/off-switch complete with pcb, airlock window, pcb for water chiller, asb-detector diode at objective lens, zylinderschraube 2 din912-m4x6, longetterpump 20l, copper sealer dn 40 cf cu pf501404-t, ex fib hv cable assy -orsay , 90u anode aperture, unloader valve for jun air compressor, chiller water pump, van der heijden, water chiller air cooled type, 12v 42ah smf battery for lokva ups, gallium source, gallium source refilled, liner tube assy, fib aperture set 50u,20u,50u,100u,200u,400u, copper gasket for gallium emitter, compressor pi-120-25, 230/50-60hz, dry backing pump system nxdsl0i, set anode screws m4x6 din7984 8x, reservoir pt, cable for penning (new pfeiffer), ex controller f/steerer, ex pcba stage controller, joy stick, controller -2. to keep the equipment in up to-date condition during the period of the contract.-msme exemption - no | startup exemption - no,

CTN :38600632

06 Jan, 2025 NA

Kamrup - Assam

Tender For supply of power supply module of hhti with lrf

CTN :38518917

31 Dec, 2024 NA

Ranga Reddy-T - Telangana

Tender For supply of electronics components required for mini projects - arduino atmega328 controller , neo 8m gps module with antenna , hi link power module 5v 2 amp , controller expansion board for interface sensors and outputs , gsm module sim 900l , gyro sensor , lcd display with i2c module , buzzer 5v dc , switches , connector cables , dotted pcb board 4x6 inch , laser cut mild steel parts and frame for robotic arm set , powder coating for the frame sets , servo motors for robotic arm , bottom setup to hold the robotic arm , 3 pin jst male and female extended length cables , power supply 12v, 5 amps , castor balls for bottom roller , screws set , robotic arm controller board with expansion for interface wires , on and off power switch , flex sensor , hc12 modules , accelerometer sensor , 2 pin jst connectors male and female , glouse with modification , 9v 250 mah battery pack , laser cut mild steel chassis for assembling the robot , powder coating the chassis , servo motor , 12v, 2 amps power adapter , ultrasonic sensor , differential motion set up , 12v, dc geared motors , 12v, dc motor driver module , 180 degree motion setup , tft display , stm32 controller board , dwm1000 , robot chassis , robot mecaanum wheels , magnetometer sensor , 12v, high torque dc motors , 12v, 10 amp current motor driver , grid poles , anchors power supply , tag setup with robot , battery pack 3 cell 2200 mah , lipo battery charger , motor clamps , bluetooth module , screws and nuts set bid number/ ( ( ) ): gem/2024/b/5616972 dated/* : 09-12-2024 bid document/ 2 1 / 41

Power House Machinery Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors