Latest prefabricated constructions Tenders | Government prefabricated constructions Tenders

CTN :39618225

25 Mar, 2025 5.00 Lacs

Ujjain - Madhya Pradesh

Tender For yearly supplay of electric material in vikram university ujjain - yearly supply of electric material and repairing work, ceiling fan 48" (crompton), ceiling fan 48" (orient/usha/hevels), ceiling fan 56" (crompton), ceiling fan 56" (orient//usha/hevels), wall fan 12" (crompton/orient//usha/hevels), wall fan 16" (crompton/orient//usha/hevels), pedestal fan 16" (crompton//usha/hevels), pedestal fan 16" (orient//usha/hevels), bulb 60 watt (philips), angle holder (anchor/western), plastic wire 23/76 copper, insulation tape 10m. 3/4" (anchor), insulation tape 10m. 3/4" (steel grip), flush switch 6a(anchor), flush switch 6a(western), flush switch 16a(anchor), flush switch 16a(western), three pin top 6a (anchor/western), three pin top 16a (anchor/western), plug with switch 16a (anchor/western), electric bell ding dong (anchor), electric bell ding dong (western), bell push gang box type (anchor/leader/cona/western), bell push flush type (anchor/western), ceiling rose three plate (anchor), ceiling rose three plate (western), flush type socket 6a. 5pin (anchor/western), flush type socket 16a. 5pin (anchor/western), cut out 16a (flora), cut out 16a (brite/anchor), cut out 32a (flora), cut out 32a (bright/anchor), cut out 63a (flora), cut out 63a (bright/anchor), cut out 100a (flora), cut out 100a (bright/anchor), cut out 200a (flora), cut out 200a (bright/anchor), main switch 100 tpn with neutral link (heavels), main switch 100 tpn with neutral link (flora), main switch 200 tpn with neutral link (heavels), main switch 200 tpn with neutral link (flora), d.b. 12 way (in closer) simple (heavels), d.b. 12 way (in closer) simple (flora), fan regulator (usha), fan regulator (crompton), tube light complete 4 18 w led (philips/havells), tube light complete 4 18 w led (crompton/havells), tube rod 4 40w/36w (philips/havells/crompton), strarter 40w/36w (philips/bajaj/crompton), strarter 40w/36w (bajaj/crompton), choke electrec 36w (philips/crompton/anchor), fan condenser 2.5 mfd. (usha/epcos), fan condenser 3.15 mfd. (usha/epcos), sun-mica board 6 mm. all size, p.v.c. copper wire 1.5 sq.mm. (anchor/polycab), p.v.c. copper wire 2.5 sq.mm. (anchor/polycab), p.v.c. copper wire 4.0 sq.mm. (anchor/polycab), p.v.c. aluminum wire 1.5sq.mm. isi 90.0m/300ft.(anchor/polycab), p.v.c. aluminum wire 2.5sq.mm. isi 90.0m/300ft.(anchor/polycab), p.v.c. aluminum wire 4.0sq.mm. isi 90m/300ft.(anchor/polycab), p.v.c aluminum wire 6.0sq.mm. isi 90m/300ft.(anchor/polycab), p.v.c. aluminum wire 10.0sq.mm. isi 90m/300ft.(anchor/polycab), p.v.c. aluminum cable armored 4 core, isi mark 6.0 sq.mm. xlpe (polycab/(anchor), p.v.c. aluminum cable armored 4 core, isi mark 10.0 sq.mm. xlpe ((anchor/polycab)), p.v.c. aluminum cable armored 4 core isi mark 16.0 sq.mm. xlpe (anchor/polycab), p.v.c. aluminum cable armored 4 core isi mark 35.0 sq.mm. xlpe (anchor/polycab), p.v.c. casing 25mm. double lock (vinay), submersible copper cable 3 core 10 mm isi (akash/finolex/aqvatek), submersible copper cable 3 core 6 mm isi (akash/finolex/aqvatek), submersible copper cable 3 core 4 mm isi (akash/finolex/aqvatek), submersible copper cable 3 core 2.5 mm isi (akash/finolex/aqvatek), submersible copper cable 2 core 10 mm isi (akash/finolex/aqvatek), submersible copper cable 2 core 6 mm isi (akash/finolex/aqvatek), submersible copper cable 2 core 4 mm isi (akash/finolex/aqvatek), submersible copper cable 2 core 2.5 mm isi (akash/finolex/aqvatek), electronic fan regulator 300w socket type step (anchor/western), m.c.b. 6 to 32 amp. (standard/anchor/legaurd), m.c.b. 40 amp. double pole (standard/anchor/legaurd), m.c.b. 60 amp. four pole (standared/anchor/legaurd), formica plate all size, electronic cord less bell (cona/westan/gm), exhaust fan 12" (crompton/bajaj/anchor), exhaust fan 15" (crompton/bajaj/anchor), exhaust fan 18" (crompton/bajaj/anchor), tube fitting box type comp. (philips/crompton/anchor), bus bar 4 way 63 a (bright), bus bar 4 way 63 a (flora), bus bar 4 way 100 a (bright), bus bar

State Government

CTN :39675093

18 Mar, 2025 2.00 Lacs

Bikaner - Rajasthan

Tender For aluminum partition work in mgsu, bikaner

Central Government/Public Sector

CTN :39685969

04 Apr, 2025 75.00 Lacs

Jodhpur - Rajasthan

Tender For 1. all day to day maintenance and repairing work in respect of buildings, roads, sanitary, water supply and wood work, aluminum work and other service lines etc. 2. different original works, renovation, any addition alteration maintenance work

CTN :39648444

18 Mar, 2025 9.50 Lacs

Udaipur - Rajasthan

Tender For supply work of all types of materials related to electricity for the year 2025-26 timer coil single phase , timer coil three phase, , four core wire aluminum, , wire 6mm aluminum, , wire 4mm aluminum, , wire 1.5mm aluminium, , wire 2.5mm aluminium, , flexible wire, , bad switch, , taperol pvc, , led bulb 09 walt, , led bulb 14 walt, , led bulb 12 walt, , bulb holder, , timer clock, , main switch 100 ampere hand operated, , main switch 32 ampere hand operated, , main switch 63 ampere hand operated, , main switch 16 ampere hand openhead, , drill machine, , pillar small/big, , tapadia, , screwdriver small/large, , tapadia, , hand gloves, , tester small/big, , surya, philips, havells/other grade a mak, , surya, philips, havells \ other grade a mak, , surya, philips, havells /other grade a mak, , tapadia - - ??????? ???????? ????? ?????? ?? ??????? ?????? ????? ???? 2025-26

Central Government And Public Sector

CTN :39622709

18 Mar, 2025 48.00 Lacs

Vrindavan - Uttar Pradesh

Tender For asset management services - asset to be valued; onsite-supply of equipments:- variable refrigerant flow system, outdoor unit(s) - heating & cooling, 8hp outdoor unit, , indoor unit, ductable type units, ductable type unit 5.5 tr, , split units , split units 2.0tr, , , refrigerant joint(s), indoor refnet joints , controllers, central remote control, twining kit, pcb safety plate controller, installation of airconditioning system of following items--lifting, shifting, installation, testing and commissioning of outdoor units equiped with highly efficient varaiable speed scrool compressors in each outdoor unit with noise level not exceeding 70db(a), etc. with nitrogen reprocessing, vacumising, charging and top-up of r410 a gas as per requirement at site. (r410a gas make-dupont/honeywell) , lifting shifting & installation of outdoor units - 8hp , tesing & commissioning charges - 16hp , vacuum, nitrogen reprocessing & r410a- refrigerent topup -16hp , lifting, shifting, installation, testing and commissioning of indoor units with outer cabinet equiped with pre air-filters, multispeed inverter motor, dx coil section, drain pain,electronic expansion valves, pipe connections, pcbs etc. (fastener make- hilti) , , , indoor unit(s), ductable type units, ductable type units, ductable type unit 5.5 tr, , "supply, installation, testing and commissioning of refrigerant piping, tees, sockets, expanders and reducers as per requirement at site complete with supports, threaded rods, channel, tie, fasteners etc. interconnecting the outdoor condensing units and indoor evaporating units. (make-mandev/mexflow), nitrile rubber tubular insulation (make-supreme/superlon/armaflex/a-flex/k-flex/equivalent)" , "supply, installation, testing and commissioning of 2 core x 1.5 sq.mm copper conductor shielded data cable as per requirement at site complete with supports, threaded rods, channel, tie, fastners etc. for control between indoor and outdoor unit & for communication between indoor unit & remote controllers in suitable pvc conduict , (make- polycab/havells)" , , supply, installation, testing and commissioning of pvc condensate drain piping of 10kg/sq.cm. (142.23 psi) with 6 mm thick closed cell elastomeric nitrile rubber tubular insulation up to the nearest drain point along with necessary fittings.(make- prince/supreme/finolex/polycon/equivalent) , supply, installation, testing and commissioning of hot dipped 20 gauge g.i. perforated trays for exposed refrigerant pipes and cables horizontaly and vertically along with threaded rod, nut, bolt, saddle, tie etc. , , supply, installation, testing and commissioning of un-insulated square/ rectangular sheet metal ducts as per requirement at site complete with threaded rods, channel, tie, fastners, brackets/slotted "c" channel for supply air ducting as per the approved shop drawings jindal, sail, tata. , , supply, installation, testing and commissioning of closed cell crossed linked polymers xlpe insulation , , supply, installation, testing and commissioning of acoustic lining with 10 mm elostomeric sinusoidal surface acoustical insualtion. , , supply, installation, testing and commissioning of extruded aluminum powder coated supply air grills/difusers with dampers and return air grills/diffusers without dampers. , supply/return air grills/diffusers with volume control dampers , supply, installation, testing and commissioning of nrv , , supply & installation charges of accessories fire retardent canvas connection & filters as required for duct type indoor units. , ms-stand for odu unit , ms-jaal , civil work chase cutting for copper/drain pipe , civil work rcc corecut/chase cutting for copper/drain pipe , annexure-iii-electrical installation and accessories-panel for 16hp odu , design, fabrication, assembling, wiring, supply, installation, testing and commissioning of following lt panels fabricated out of 18 guage crca sheet steel in cubical formationwith reinforecment of suitab

CTN :39567883

18 Mar, 2025 1.29 Lacs

Bhopal - Madhya Pradesh

Tender For construction of aluminum particle work for room at zone office no. 06

State Government

CTN :36898792

19 Mar, 2025 37.98 Lacs

Jabalpur - Madhya Pradesh

Tender For corrigendum : aluminum partition works in control room building for the fote panel installation work at various ehv substation of under eht-construction division satna.

Central Government And Public Sector

CTN :39631971

19 Mar, 2025 NA

Nagpur - Maharashtra

Tender For supply of aluminum single sided a shape platform step ladder standards- osha, ansi is: 3696 (part 2) , capacity- 200 kilograms, (maximum reach height-23 ft.) technical specifications:- i) anti-skid rubber shoe on the upper and lower side, rectangular tube, telescoping, weather resistant, all steps and top rear horiz ontals are to be knee-braced for additional support, features nonconductive rails, which makes this ladder i deal for working near electricity, foldable for easy storage, non-marking castor wheel to provide higher mo bility, holding handrail, large platform to provide secure & comfortable work area, aluminum feet with slip resist, inside spreader, anti-corrosive, pulling handle. ii)normal size(height without elongation) - 18 foot iii) maximum load capacity(kg) -200 kilogram iv) maximum reach height- 23 foot. v) no of rung - 32 vi) step width - 5 inch vii) number of step- 16 viii) type - single sided a shape ix) approx. wt.- 200 kilogram x) wid th- 22 inch xi) material- aluminum brand: - alco/s.k.ladders/s.j. ladders/ [ warranty period: 30 mont hs after the date of delivery ]

Central Government/Public Sector

CTN :39605765

29 Mar, 2025 NA

Ratlam - Madhya Pradesh

Tender For supply and fitment of acp informa?onboard made by lit vinyl eco solventprinting with lamination pasted on acpboard with 1 inch hollow steel barstructure and aluminum channelfinishing with lettering and printing size38 mm x 25 mm with clips and screw of a-1 .detailed descrip?on as decided bysse/tws/rtm . supply and fixing of boardswith all material t&p at various sta?ons of rtmdivision. ,supply and fitment of acp informa?onboard made by lit vinyl eco solventprinting with lamination pasted on acpboard with 1 inch hollow steel barstructure and aluminum channelfinishing with lettering and printing size38 mm x 25 mm with clips and screw of a-1 .detailed descrip?on as decided bysse/tws/rtm . supply and fixing of boardswith all material t&p at various sta?ons of rtmdivision. , supply and fixing of incumbency boardfor divisional officers chamber made ofteak wood withcarving work all foursides top portion half round withdesignation carved cutting in woodenplank back ply wood 6mm thick withfinished or polished with properhanging arrangement. all previousname and date of officer with vinilecutting letter of suitable font sizes ofboard shall be space available onchamber walls size 4x2 ft. or 5 x 2.5 ft , retro reflec?ve sigma board of size 600mmx450mm x2 mm with retro-reflec?ve sigma stripand board remains non- illuminated as perrdso spec. no. eti/ohe/33a (12/97) rev-8(11/2012) or latest and drg. no.ti/drg/ohe/pltbrd/rdso/00036/12/0.accepted make- firm's self. (warranty period :upto 30 months from the date of delivery.) , display boards of various size made of acp(aluminum composite panel) of 3mm thicknesspasted with inkjet vinyl 1440 dpi printeds?ckers. prin?ng ma?er will vary for each board(size of board and prin?ng ma?er to becollected from consignee at the ?me of prin?ng) each board to be with four numbers of3mm holes in the corner and to be fixed withmetal eyelets , white board with aluminum framed displayboard 2400 mm 1200 mm, non-magne?c 2 in 1whiteboard and chalkboard, unmatchedflexibility for any space, with a generous wri?ngarea make-aurum display or similar , laminated engagement board/ wihite boardwith colour pen & duster , supply, installa?on and commissioning of thedisplay board made of aluminiumcomposite panel sheet with inkjetprinting (multi- colour). the borad to beframed with suitable steel square tubesand aluminium beading. thickness of theboard should not be less than 3 mm. theboard should have suitable hangingarrangement( 2 hooks at top). [ note:print content will be given by theconsignee as and when required.staggered supply has to be made as perthe requirement of railways. supply to bemade on urgency basis where and whenrequired as per the consigneerequirement.hence firm may quote withdue consideration of above.] , display boards made of aluminiumcomposite panel sheet with inkjetprinting (multicolour). the borad to beframed with suitable steel square tubesand aluminium beading. thickness of theboard should not be less than 3 mm. theboards should have suitable hangingarrangement( 2 hooks at top). [ujjain75sqft ] of railways. content will be given byconsignee. , z web medium traffic vinyl nonwoven higherdirt scrapping, water removing rug, specialpolymer tu?s loop design mat with twin bladeopera?on. size: 1000 mm x 1500 mm x 09 mmthick. color = grey , set of vinyl s?ckers as per annexure a for melaspecial train rake 2024-2025 , supply, installa?on and commissioning ofgrooved welcome board with red velvetwooden board with frame and complete fi?ng(stainless steel) and le?er kit for welcomeboard: one set of 1.5 inch, one set of 1 inch &one set of 0.5 inch. supply as per specifica?ona?ached

CTN :39606680

28 Mar, 2025 NA

Hooghly - West Bengal

Tender For tender for supply of taking down of light fittings of any type size and model complete all as specified and directed. , taking down of brackets of any type size and model complete all as specified and directed. , m& l in repair steel tubular swaged poles complete with cast iron base plate , finial taper plug , bolts , nuts & screws as specified type 410 sp 22 (8.5 metres long) complete all as specified & directed. , m& l in repair steel tubular swaged poles complete with cast iron base plate , finial taper plug , bolts , nuts & screws as specified type 410 sp 31 (9 metres long) complete all as specified & directed. , re fixing of led street light fittings of any wattage outdoor type complete all as specified and directed. , supply and fixing in repair led street light fitting 120 watt 230 v ac outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver , lamp bracket with impact and corrosion resistant including thermal management in multiple optics , efficacy 110/120 lpw , complete with ip 65/66 protection complete all as specified and directed. , supply and fixing in repair led flood light 80 watt 230 v ac outdoor type with thermal management in multiple optics and equipped with ip66 protection , with impact and corrosion resistant complete with driver and lamp , efficacy 110/120 lpw , including clamp , nut , bolts etc.complete all as specified and directed.make. crompton , cat no.lfl 80 cdl/60 hpm , supply and fixing in repair led flood light 150 watt 230 v ac outdoor type with thermal management in multiple optics and equipped with ip66 protection , with impact and corrosion resistant complete with driver and lamp , efficacy 110/120 lpw , including clamp , nut , bolts etc.complete all as specified and directed.make. crompton , cat no.lfln 150 cdl/60 m , s&f cable junction box 155x210x92 mm in size , made out of thermoplastic , having ip 66 protection for outdoor installation fixed with 4 way bakelite cable terminals including 03 nos polymide gland with check nut (m 32 02 no & m 25 01 no) fixed on poles with aluminium clamps of size 25x3mm , nuts , bolts , washers etc. including taking out of old unserviceable cable junction box complete all as specified and as directed. make. cat no. dk 1616g of hensel or equivalent model , supply and passing through steel tubler pole/service connection , 1100 volts grade multicore , fr , round insulated copper conductor and sheathed flexible cable , multistranded , three core of nominal cross sectonal area 1.5 sq mm , for connection of security light from junction box through pole /conduit with all terminals complete all as specified and as directed. , s and f single arm bracket made of40mm dia 1.0mtrs long for security light , with mounting ms clamp of flat iron size 25x5mm of suitable length 02 pairs including nut bolt etc of suitable size and painting to ms clamp with two coats of aluminium paints over a coat of red oxide netal primer all as specified and directed by engr in charge. , s & f in repair rigid non metallic pvc conduit of dia 20 mm exclusive of boxes (junction/terminal) but inclusive of all tees , bends , elbows , reducers , bell mouth tube ends and fixing accessories such as couplers , lock nuts , saddles , pipe hooks , clamps etc. all as specified and directed by engr in charge. , m and l for earthing complete with ms galvanised plate of size 60cmx60cmx6mm as earth electrode buried directly in ground earth pit not less tan 2.25mtrs deep below ground level with top edge of the plate not less tan 1.5mtrs below normal ground level connected to galvaniosed iron strip 32x6mm as earthing lead by means of bolts nut check nut and washers of galvanised iron welding or steel all as shown in electrical plate no 3 in ssr part i of 2009 connected to earthing test point all as specified complete with exevation and earth work pcc pit with 6mm thick ci ms cover having suitable handle 10mm ms rod with frame and locki

Prefabricated Constructions Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government And Public Sector

State Government

Central Government And Public Sector

Central Government/Public Sector